Can I set null to the "DiscoGroup.0.stdout" ?

Dear all:
Can I set null to the "DiscoGroup.0.stdout" ?
Because this file is too big 22G,so I want to set null to this file , can I do this action ?
[appfmrlt@csslxa02 jvm]$ pwd
/u01/oracle/fmrlt/ora/iAS/Apache/Jserv/logs/jvm
-rw-r--r-- 1 appfmrlt dba 22G May 18 09:33 DiscoGroup.0.stdout
My environment: oracle ebs 11.5.9 | Red Hat 3.0 | oracle 9.2.0.3
Regards
Terry

Terry,
Yes, it is safe to do. You may take a backup of the files or rename it, and you better stop Apache before doing so then bring it up again.
Thanks,
Hussein

Similar Messages

I use an iphone 3gs can i set one of the song as ring tone or i will only be able to use the inbuilt ringtones?

i use an iphone 3gs can i set one of the song as ring tone or i will only be able to use the inbuilt ringtones?

yes you can
A. how to make a ringtone using iTunes
First, open up iTunes in order to make a ringtone using iTunes. Find the song you want to turn into a ringtone by browsing through your music library.
Next, find exactly what part of the song you want to make a ringtone using iTunes. For example, if you want to use a specific section of the song from 21 seconds to 40 seconds, make a note of where you want the ringtone to begin and end.
Now, right click on the song you want to turn into a ringtone. Click "Get Info". Now, in order to make a ringtone using iTunes, click the "Options" tab.
Check the "Start Time" check box. Type in the point in the song where you want the ringtone to start in the format "minute:seconds" (e.g. the second mark would be 0:20). You can also be more precise by adding a period and putting milliseconds in after that (e.g. 0:20.150, would be 20.150 seconds). Also, click the "Stop Time" check box and enter where you would like the ring tone to end. Keep in mind ringtones can only be around 39 seconds maximum. Press "Ok". We are almost done making a ringtone in iTunes
Now, right click on the same song. Select "Convert AAC Version". If it is in another file format, you can go to "Edit" then "Preferences" and under the "General" tab click "Import Settings"; change the file format to AAC. After you select "Convert AAC Version" a new file will be created, but it will only be the segment of the song that you specified earlier.
Now, you have to find the file you just created. Right click on the new, shorter song and select "Open in Windows Explorer". The file extension should be .m4a. Rename the extension to .m4r by right clicking the file and selecting "Rename".
Now you can delete the shortened version of the song in your iTunes library. Then, double click the .m4r file and it will loaded into your iTunes Ringtone list. Now you can make a ringtone using iTunes!

How can I set my bluetooth. the devices shows the timer going continually

how can I set my bluetooth. the devices shows the timer going continually

You can set the home page to about:newtab.
*Tools > Options > General > Startup: Home page
*https://support.mozilla.org/kb/How+to+set+the+home+page
See also this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites

Can you set print from the samsung stratosphere mobil phone

Can you set up the mobil phone samsung stratospher to print to the hp officejet pro 8600?

Bettielittle118, Hope you are doing well and welcome to the HP forums.
Yes you shoud be able to print from the Samsung Stratosphere as long as is running Android
If what you want is to print from anywhere you must use HP ePrint go here to see how to start with this super free service.
This will give more control but it can be use only when the device and the printer are in the same network i.e. Home Network
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&lc=en&cc=us&dlc=en&product=3857218
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Can't find null on the table

Hi Everyone,
This is so weird.
I tried to find the sum of revenue_amt in my table. (see SQL step #1)
It returned a null.
So i know that i have a row that contains a null in the revenue_amt column.
I verified using this query.(see SQL step #2)
But when i look for the row that contains the null. Nothing comes up (see SQL step #3)
can someone help? this is so weird.
SQL step #1:
select sum(revenue_amt) from cf_ft;
SUM(REVENUE_AMT)
SQL step #2:
select sum(revenue_amt) from cf_ft where revenue_amt is not null;
SUM(REVENUE_AMT)
759.56
SQL step #3:
select * from cf_ft where revenue_amt is null;
no rows selected

Basically the result shown is kind of impossible as a sum without where clause cannot come up with a null result if a sum with where clause returns an amount. This is because the aggregate functions ignore null values.
So i doubt that those results are based on your queries or that the results have been shown within one session that had repeatable reads enabled. A sum may only show null as result if
a) there are no rows in the table
b) all rows have null values
hth

How can I set defaults in the TestStand's step settings Labview Advanced Settings tab to run a VI on a remote PC?

I am accessing a VI many times which is run on a remote PC.
When I click Step Settings, click on the Module tab, then click on the Labview Advanced Settings, there is are options for running a VI on a remote PC.
An annoyance is having to enter the remote host, remote VI path, port number and timeout settings every time I created a step to call the VI in the tests. These are a constant, or at least the rule by far rather than the exception. The TestStand step settings default is the VI does not run on a remote PC (unticked) and there are of course no IP addresses etc as defaults. So if I make a minor change to the tests such as the remote VI location, I have to manually change it is every occurrence of the VI being called. This is very time consuming and is prone to human error.
Is there a way I can preset these settings so that every time I call a Labview module, these defaults are invoked without me having to set them every time?
I guess a workaround is to have the VI run in a subsequence, so that the settings are made just once, but I would prefer not to have to do that.
regards to the NI community,
Dave
Solved!
Go to Solution.

Hi,
What you can do if you are using TS4.x is create your first step, then add it to the Template List. Then use the step from the template list when you require similar steps. See User Manual Chapter 3-6.
Regards
Ray Farmer
Regards
Ray Farmer

How can I set and save the APN on my Z10 in Myanmar?

I have a blackberry z10 stl 100-2. I live in MYANMAR where there is a only one carrier "MPT". It allows every user to use internet by putting an APN name "mptnet" in 2 kyats per minute. Every handset can use data services by this way even blackberry bold 9900 included. But now I put this SIM card into my new Z10. After that I couldn't even set up the phone. So I sent this phone to Singapore and set up , then I have got back. I can use it for only phone call and can use internet via wifi connection. I can't save the APN at all although I type APN name in APN name field and tap the save button. So I can't use the data services with this latest and expensive bb z10 until now while other phones such as Iphone, HTC, Samsung phones is working with this APN easily. Please kindly advise me if you have a solution for this problem.
Thanks and regards,
Lmm

Your SIM card has data working in any other phone I hope.
Try this. Under Network Connection>Internet Tethering. setup tethering on the Zed10 either USB/Bluetooth option. Try to turn it on. If it fails to turn on, restart your device and try to turn on again. It should turn on and it should change from you small e or h to a caps one.
Please update on progress
Twitter: @IAmBenGiey | Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Try my apps:
The Ultimate Currency Converter and T2G - BloGFeed

How can I set or reset the page that is loaded when I open a new tab using Ctrl t ?? by

I recently downloaded a program that has, as an undesired additional action, apprently setup Yahoo as the page that opens by default when I open a new tab using <Ctrl> <t> (or the <+> symbol on the tab bar). This is aggravating to me, particularly as I have not been able to find a way to stop it occurring.
I expect that it is buried somewhere in my profile, but I also have not found a way to explore or edit the contents of my profile.
There is a JScript script file called "user" in ...\profiles\4g4vpust.default that I suspect is associated with the behaviour, but renaming it achieved nothing.
Prior to this, my new tabs used to open as blank pages, i.e. did not load any URL and I was happy with that. How can I get back to that state?

Did it add the freeze net assistant add-on? That add-on is known to do this. If you have that add-on you can uninstall it Firefox should revert to the default behavior.
If you do not have that add-on, another add-on will be causing this, you can use the procedure in the following link to identify what one - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Root CA-How can I set my server the single CA in my own intranet?

I have some confidential network(without any internet connection).
How can I generate FULL certificate chain with my own CA (without requesting any external certificate)? Software is Solaris 9 (Sparc) & SunONE Portal Server.
Sincerely.
Yurry A. Buharkin

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
<welcome-fiile-list>
<welcome-file>over.jsp</welcome-file>
</welcome-file-list>
</web-app>
please see the above.
i have saved my jsp files in the root dir of webapps. in c:/tomcat/webapps/root/web_inf/web.xml , the content of this web.xml is as shown above.... but it still dont work .... how i can i rectify this problem.
really thanks a lot

How can I set in ps the "file info" autofill option?

Hi,
finally I have found how to edit my file info inside Ps, I have created an average file info, my name, my website, and other contact info, and i want to add these information to all of my future works description.
In this picture, there is an auto completion option, what does this mean? I want to these informations will be applyed automaticly whithout my intervention. Is there any way to do this?

Allthough I have never used them I would investigate templates in Bridge. Here is one link http://www.photometadata.org/META-Tutorials-Adobe-Bridge-Creating-Metadata-Template

Can I set a schedule for use of the internet with this router?

can I set a schedule the internet?

The Airport Express is not a router
The AirPort Express is most certainly a wireless router, capable of 10 wireless connections. See the lit and specifications for more details on this router.
AirPort Express
In addition, using the Timed Access feature on the Express, it is possible to establish daily time limits for all devices that will connect to the network.
This can be done globally for all devices, or individual time limits can be established for each separate device that connects through the AirPort Express.

On DPS how can I set the layers in the correct order for adobe viewer?

How can I set it so the icons appear behind the apple the same as the first picture but for adobe viewer as well

Turn the apple into a two state MSO set to autoplay once and stop on the last image.
I have a DPS course on lynda.com you might benefit from. If you don’t have a subscription, this link will get you a 10 day trial: http://bit.ly/1xHYd0i
You should also download Bob Bringhurst’s DPS Tips app from the app store.

What is the default identity store - and how can I set it?

Hi,
I'm running Webcenter on WLS, and using WLS and JPS for the authentication of users. On the WLS Console, if I go to Security Realms -> myrealm -> Providers, I have a list of four different providers.
If I understand correctly, these four providers are my identity stores. How can I set one as the 'default' identity store? Or see which one is currently the default?
The reason I'm asking is I have the following code in Webcenter to create a new user in the Active Directory:
      // Get the default identity store
      IdentityStore idStore = WCSecurityUtility.getDefaultIdentityStore();
      // Get the user manager object
      UserManager usermgr = idStore.getUserManager();
      usermgr.createUser(loginName, password.toCharArray(), propertySet);So I have a utility Java class which gives me the "default identity store". Now I want to change the WLS configuration so that the Active Directory in which I want to create new users is the "default" identity store.
Thanks in advance for any help,
Ludovic

Hi,
Thanks a lot for your help and providing this link. I'd actually already looked at that before, but I don't understand how it clarifies what the default identity store is. The relevant part is this, if I understand correctly:
OPSS initializes the identity store service with the LDAP authenticator chosen from the list of configured LDAP authenticators according to the following algorithm:
1.    Consider the subset of LDAP authenticators configured. Note that, since the context is assumed to contain at least one LDAP authenticator, this subset is not empty.
2.    Within that subset, consider those that have set the maximum flag. The flag ordering used to compute this subset is the following:
    REQUIRED > REQUISITE > SUFFICIENT > OPTIONAL
    Again, this subset (of LDAPs realizing the maximum flag) is not empty.
3.    Within that subset, consider the first configured in the context.Step (1) will match 2 external AD's and the built-in WLS LDAP, so 3 in total.
Step (2) will still match 3 in total, as they are all 'sufficient'. In my setup, I need them all to be 'sufficient'.
Step (3) is a step I don't understand. What is "the first configured in the context"? What context? Do they mean the one that was first created? In that case I can't change the default, right?
Or do they mean "the first in the list on the WLS Console"?
Best regards,
Ludovic

Result set null

Hello techies,
I am doing simple program, which is connecting to mysql server and retreiving the results from my database using servlets.
I want to do if the result set is returning zero rows i.e if there is no matching rows is available in the table, which i had specified in my query.
Here is my code
String url = "jdbc:odbc:testDSN";
Properties p = new Properties();
p.put("user", "root");
p.put("password", "kkkk");
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
conn = DriverManager.getConnection(url, p);
System.out.println("connection established");
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("select *from test.emp where empNumber =15");
System.out.println("resultset is null" + rs.wasNull());
if (rs.getRow() == 0) {
System.out.println("nomatching subject is found");
out.println("No Matching subject is found");
else {
out.println("<TABLE CELLSPACING=\"0\" CELLPADDING=\"3\" BORDER=\"1\">");
out.println("<TR><TH>eno</TH><TH>ename</TH><TH>date</TH></TR>");
// Loop through results of query.
while (rs.next() == true)
out.println("<TR>");
out.println("<TD>" + rs.getString("eno")+ "</TD>");
out.println("<TD>" + rs.getString("ename") + "</TD>");
out.println("<TD>" + rs.getString("date") + "</TD>");
out.println("</TR>");
Here if there are no employe record matching eno =15 in my table then i want to print no matching record is found.
where i am making mistake??
plz help me .
It is very urgent.
Thanks (inadvance)
regards,
ramu

Good Lord, you have database and HTML generation code in the same method?
This is not the way to do JDBC code. Start with a tutorial.
Ever read about object-oriented programming? How 'bout starting with an Employee class that has id, name, and date (what date? birth date? employment date? termination date?) as attributes. Then write a data access object that can do all the database stuff on Employee's behalf, without any consideration for UI. Test that on the command line until you have it working perfectly. THEN worry about how you'll display results to the user.
Your JDBC code isn't right. wasNull() checks to see if the column result is null, not the result set itself. (ResultSet can never be null; read the javadocs). You'd be getting a NullPointerException if ResultSet was null, wouldn't you?
Your code deserves a SERIOUS rewrite, which I'm not inclined to do for you. But I would recommend something more along these lines:
// hardwired url, driver, and query? oh, my - that's bad.
String url = "jdbc:odbc:testDSN";
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
conn = DriverManager.getConnection(url);
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("select * from emp where empNumber =15");
// you're obviously putting this in a servlet - bad idea.
// ever heard of JSPs?
out.println("<TABLE CELLSPACING=\"0\" CELLPADDING=\"3\" BORDER=\"1\">");
out.println("<TR><TH>eno</TH><TH>ename</TH><TH >date</TH></TR>");
// Loop through results of query.
while (rs.next())
out.println("<TR>");
out.println("<TD>" + rs.getString("eno")+ "</TD>");
out.println("<TD>" + rs.getString("ename") + "</TD>");
out.println("<TD>" + rs.getString("date") + "</TD>");
out.println("</TR>");
}%

How to set Delete Rule to SET NULL while designing relational model .

Dear All,
Am new to SQL Developer Data Modeler and was doing some relational and logical design using Data modeler and i want to generate DDL script, while doing i was struck up with this issue.
I have two table and tried to give Primary key and Foreign key relationship, in foreign key table i want to set the Delete rule has SET NULL, but it is not found. I have other three options like CASCADE, RESTRICT,NO ACTION. Whereas in logical design i can find SET NULL, NO ACTION and RESTRICT....
But the DDL script is getting generated based on Relational design , i want to set foreign key has SET NULL in delete rule how to accomplish that?
Please help me......
Thanks in Advance
Ramkumar.S

Hi Ramkumar,
If you unset the Mandatory property on the Foreign Key, you should then be able to set the Delete Rule to SET NULL.
David

Can I set null to the "DiscoGroup.0.stdout" ?

Similar Messages

Maybe you are looking for