Can I set the "step run mode" -property with the property loader

Is it possible to set the "step run mode"-property by using the property loader to "Skip" , "Normal" or "Force PASS" ...in TestStand 3.0 ?

I turned on Station Options>>Preferences>>Show Hidden Properties and then exported the Step.TS.Mode property to a limits file. I then added a PropertyLoader step and it functioned correctly.
Note that importing a hidden TS subproperty makes an edit to the sequence file, even if done at runtime. Thus if you later save the file, you might end up inadvertently saving the last imported values. This isn't necessarily a problem if the values in the file are always overwritten by a property loader step.
(btw, I tested this in 4.0, but I'm hopeful it would also work in 3.0)

Similar Messages

Can I set up a 5.1 surround with the headphone output?

Can I set up a 5.1 surround with the headphone output? I've got everything connected to the headphone output but it doens't seem to work very well.
This question was solved.
View Solution.

Great Question!
The output on the notebook is 2.0 unless specified.
Most 5.1 headphones make a virual surround sound experience unless they require multiple mini jack inputs, optical, or coaxal.
The only way to experience true 5.1 on a notebook is to have an internal 5.1 card (which is not included in current HP notebooks) or purchase an external to plug in (USB or ExpressCard).
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

TestStand 3.5 step run mode ingnored during execution

Hi,
I am seeing a problem in Teststand 3.5 to do with the step run mode. I have a sequence which i have a number of steps that i have set the run mode to skip. However when i execute the sequence some of the run mode skip settings are ignored, by this i mean that they are set back to run mode normal.
It is always the same test steps that this happens with, one step is a numeric limit test and one is a CVI dll multi numeric limit test call. I have tried saving the sequence under a different name in case the sequence has somehow corrupted but this made no difference.
Has anyone seen this before?

Hi,
Is it possible to post an example highlighting this problem?
regards
Ray Farmer
Regards
Ray Farmer

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

Hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks

hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks

Your description of the problem is not quite clear so I made certain assumptions. I hope I am rigtht. I believe you have a color patch such as this:
that you would like to place in an image area that has modeling in its white background. You do not want to lay in a flat color but rather to add a color and not lose the modeling or other background tone. The problem is, after making the selection, if you use Edit > Fill and set the Blending mode to Color, the white background remains white. The only colored background area may be an object's shadow or some similar area that is not pure white. (Image 2) It is an unsatisfactory result.
If that is an accurate description of the problem, consider this:
Image 1: The original image
Image 2: Edit > Fill with the Blending mode set to Color. White remains white
Image 3: Mode changed to Lab Color. Edit > Fill with the Blending Mode set to Color. Then return to RGB.
(I would not normally use this green as a replacement color but since it is a Tiffany clock, I chose a light version of Tiffany's trademark color.)

Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?

Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?

See these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mountain Lion Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.
Once you get familiar with the Mac, see:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs, ,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information.

How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?

How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?

MobileMe service is finished.. to get remote access to the Mac or TC you use iCloud account.. but that is for files.. not to access web cams.
Without dyndns client in the TC, you can perhaps run dyndns on the computer or video recorder..many of these will have clients built into them.
Even better get a static Public IP from your ISP.. that is the correct professional way to do it.
Or you can use whatever broadband modem you have and remove the TC as the main router.. simply bridge it. Use your adsl router for connection. Almost all adsl have built in dyndns.
Sorry your language is very hard to follow.. and I am sure you are finding my answers similarly difficult.
Basically the TC is about the hardest device to setup because it is lacking important networking functions.
Get a vpn router and use vpn connection is far superior to any other method. But you cannot do it with TC.

How can I set up an older airport express using the newest airport utilities?

How can I set up an older airport express using the newest airport utilities? Seems like there isn't an option to set this up. Normally you could add/set up this in the airport setup assistant- but that doesn't exsist any longer.
Thanks for any suggestions

How can I set up an older airport express using the newest airport utilities?
Unfortunately you can't, since Apple dropped support of the older AirPorts with AirPort Utility 6.x.
Using some workarounds....not supported by Apple.....you might be able to download and install an older version of AirPort Utility that would allow you to administer the older AirPort.
See this thread for more details and instructions:
https://discussions.apple.com/message/21397085#21397085

How can I set a gap in a JTextField, before the active Textfield starts?

Hi,
how can I set a gap in a JTextField, before the active Textfield starts?
I'll avoid, that the input text starts immediately after the border of the JTextField.
Btw, how can I set the height of the JTextField in a BoxLayout?
Thx.
Hans

Yes, that was also my thinking, but nothing happens.
Maybe You have an idea :-)
Thx, Hans
Here a part of my code:
private JPanel createEntry(String label, JTextField jtf, String initJtf, boolean editable) {
    jtf.setColumns(15);
    if (editable) {
      jtf.setEditable(true);
      jtf.setBackground(new Color(191, 191, 255));
    else {
      jtf.setEditable(false);
      jtf.setBackground(SystemColor.control);
    jtf.setText(initJtf);
    jtf.setForeground(Color.black);
    jtf.setBorder(BorderFactory.createLoweredBevelBorder());
    jtf.setMargin(new Insets(50, 20, 50, 40));   // <- The PROBLEM
    JPanel panel = new JPanel();
    GridLayout gl = new GridLayout(1, 2);
    gl.setHgap(1);
    panel.setLayout(gl);
    panel.add(BxpCdmUtils.Utils.createLabel(label, Color.darkGray, Font.BOLD, 11));
    panel.add(jtf);
    JPanel superpanel = new JPanel();
    superpanel.setLayout(new BoxLayout(superpanel, BoxLayout.X_AXIS));
    superpanel.add(panel);
    superpanel.add(new JLabel(" "));
    return superpanel;
}

Auto-Capitalization: How can I set Pages v5.01 to auto-capitalize the first letter of the first word in a sentence and to automatically change lower case "i" to "I" appropriately. I'm unable to find a menu that offers me these.

Auto-Capitalization: How can I set Pages v5.01 to auto-capitalize the first letter of the first word in a sentence and to automatically change lower case "i" to "I" appropriately. I'm unable to find a menu that offers me these.

Gavin Lawrie wrote:
Once it had been established that the iWork rewrite had resulted in some features being lost and others broken, and once Apple had acknowledged the concerns* and suggested they are working on fixes**, I'm not sure what else there is to achieve.
You are writing that in the perspective of having read about it here already. Repeated often enough that you encountered it somewhere in the posts.
Users are flooding in here and don't know any of this. Of course we have to repeat everything endlessly.
Because I like to give precise, understandable and workable answers to repeated questions, and Apple doesn't allow sticky posts here, I created a separate forum which users can consult to look up real answers, and contribute for themselves if they have something valuable to add:
http://www.freeforum101.com/iworktipsntrick/
There is a section purely devoted to Pages 5. Add whatever answers you feel will lighten the problems of Apple's 'upgrades'.
Peter
* Where have they acknowledged anything?
** They have barely anything listed, compared to the massive list of deleted features, and nothing but an extraordinarily long time frame considering they created the problems here and now. Apple has not said they will do anything at all about fixing the real issues, the biggest of which is that the new iWork apps break virtually all the work of existing users.

I can't set a layer blend mode to "Screen"

Hello, I'm new to Photoshop as of an hour ago (I've been using GIMP for 2 years).
I have a layer selected and I want to set the blend mode to "screen". However, the screen mode as well as several others are greyed out and won't let me select them. I'm using Windows 8 Home Premium 64 bit, and Photoshop CS6 Extended (Trial) 64 bit. I'm intending to get Adobe Creative Cloud tomorrow, but is the reason for this that I'm using the trial version? If not, what am I doing wrong? There is a screenshot below to show what I am talking about. Any help would be appreciated. Thank you!
http://i1289.photobucket.com/albums/b504/thomasbowe34/ps_zpsc5e055f5.png

Took me a few second to figure out whats wrong. But the answer is, you're in the 32 bit mode. Changing the mode to 16 or 8 { (Image>Mode>8Bits/Channel) or (Image>Mode>16Bits/Channel) } will make it available.

Can we set output formats(used in billing) at the time of project creation

hi ,
Can we set output formats(used in billing) at the time of project creation (Project system)
Output formats- like e billing format etc.
Thanks

Hi
No .WE CANT

HT2534 In the step #10, I have not the "None" option. What can I do?

In the step #10, I have not the "None" option. What can I do?

This is how I discovered and solved my problem!
None option will be visible only when you pretend to download a free app and select create new Apple ID.
1- Pretend to down a free apps from iTunes Store
2- Create new ID (make sure you have new email also)
3- None payment type will be surely visible
4. Click, fill in information and continue and finish
Hope that help!!!

Can I set up my itouch and iphone on the same macbook pro's itunes?

Can I set up my itouch and iphone on the same macbook pro's itunes?

Certainly. iTunes has no problem with it.

HT204380 Can I set my phone number for FaceTime on the iPad mini?

Can I set my phone number for FaceTime on the iPad mini?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
 Cheers, Tom

Can I set the "step run mode" -property with the property loader

Similar Messages

Maybe you are looking for