Can I set up a link (button or word) from a specific slide in a slideshow?

Can I set up a link from a specific slide in a slideshow?

Yes
Turn off the "Edit Together" option.
Navigate to the slide you want (turn thumbnails on temporarily if necessary).
Select the area you want.
Hyperlink in the normal way.
Repeat until you have linked all the slides you require.
Turn "Edit Together" back on.
I think I had to link the caption separately as I couldn't find a way of selecting them together with the image or grouping them. Each slide links to a different page no problem.
Peter

Similar Messages

  • How can I set the value to a session bean from backing bean

    Hi Experts,
    How can I set the value to a session bean from backing bean where I have created getter and setter
    methods for that variable.
    Basically I am using ADFUtils class where I am able to get the value from session bean
    using following expression
    String claimType =
    (String)ADFUtil.invokeEL("#{ClaimValueObj.getClaimType}");
    Thanks
    Gayaz

    Gayaz,
    Wrong Post !!
    Post in JDeveloper and ADF
    Thanks
    --Anil                                                                                                                                                                                                                               

  • How can i set authrization to delete/change email address from broadcasting

    How can i set authorization to delete/change email address from information broadcasting. I would like to set an authorization because other bi users also have an authority to change my auto mail settings. How can i restrict this?

    Auth object for Broadcasting in 7.0 server
    RSRD_ADMIN - Broadcasting (7.x) Administration
    Check the authorizations for Broadcasting in the below SAP notes.
    Authorization check for broadcasting settings
    SAP Note Number: 1053944
    Please go through this thread for additional info.
    Authorizations for Broadcasting

  • I have 4 computers running Adobe CC under two different accounts (as 1 account can only be installed on two computers) i need it on a 5th computer now, do i need another account or can i set up something so all 5 run from the same account making it easier

    I have 4 computers running Adobe CC under two different accounts (as 1 account can only be installed on two computers) i need it on a 5th computer now, do i need another account or can i set up something so all 5 run from the same account making it easier?

    Check into a Team account
    -http://www.adobe.com/products/creativecloud/teams/benefits.html
    -assign a new team member http://forums.adobe.com/thread/1460939?tstart=0 may help
    -Team Installer http://forums.adobe.com/thread/1363686?tstart=0

  • Hi please help me , how can i set my ringing tone on my iPhone from my playlist. I wanna set some normal music from  my floder not some ringing tones from iPhone origin . Please help me . Thank you :)

    Hi please help me , how can i set my ringing tone on my iPhone from my playlist. I wanna set some normal music from  my floder not some ringing tones from iPhone origin . Please help me . Thank you

    You need to make your own ringtones in iTunes then sync them to your phone. Follow the directions here:
    http://osxdaily.com/2010/09/04/make-free-iphone-ringtones-in-itunes-10/

  • Can I set my middle mouse button to pan?

    Is it possible in Preferences to set my middle mouse button to temporarily become the "hand" tool so that I can pan?
    I switch back and forth between InDesign CS3 and AutoCAD, and my middle mouse button is PAN in CAD. It drives me crazy to switch back and forth. I'd love it if I could make them the same.
    I know that I can use the space bar, but I'm lazy and I've developed habits after using CAD exclusively for the last 3 years. I just started using IND again at my new job so this is the first time I've really had to switch between the two.

    Check with mouse manufacturer. There is nothing in InDesign you can set
    for that.

  • How can i set action on UITaBar and get event from that

    Hi All,
    I m doing one apps in which i have to add three UITabBarItem and this is UITabBarSystemItem.
    Now i cannot understand that how can i set action and get event from the?
    And how can i set various views on three tab bar item.
    I have to use UITabBar means i have to use UINavigationController+UITabBar
    My code id
    tabBar =[[UITabBar alloc] initWithFrame:CGRectMake(0,370,320,50)];
    tabBar.backgroundColor =[UIColor blackColor];
    UITabBarItem *search =[[UITabBarItem alloc] initWithTabBarSystemItem:UITabBarSystemItemSearch tag:0];
    UITabBarItem *recents =[[UITabBarItem alloc] initWithTabBarSystemItem:UITabBarSystemItemRecents tag:1];
    UITabBarItem *favorites =[[UITabBarItem alloc] initWithTabBarSystemItem:UITabBarSystemItemFavorit es tag:2];
    tabBar.items =[[NSArray arrayWithObjects:search,recents,favorites, nil] retain];
    tabBar.selectedItem = search;
    [myView addSubview:tabBar];
    [tabBar release];
    I add a action:
    UITabBarItem *search =[[UITabBarItem alloc] InitWithTabBarSystemItem:UITabBarSystemItemSearch tag:0 action:@selector(select:)];
    So it error: Warning -no'InitWithTabBarSystemItem:tag:action:' method fount
    So any can help me regarding it?

    Thanks RickMaddy very much.
    I read and do with sample at the View Controller Programming Guide . But when run it only view TabBar with title but haven't got any TabBarItem on it. I searched a few example about TabBar and i did, but i want do a form with a button then press on button it view a form with 2 TabBarItem on TabBar and press each TabBarItem will show correlative form page 1, page 2.
    UITabBarController *tabBarControl = [[[UITabBarController alloc] initWithNibName:nil bundle:nil] autorelease];
    tabBarControl.title = @"Tab bar";
    ViewControl1 *view1 = [[[ViewControl1 alloc] initWithNibName:@"ViewControl1" bundle:nil] autorelease];
    ViewControl1 *view2 = [[[ViewControl1 alloc] initWithNibName:@"ViewControl2" bundle:nil] autorelease];
    tabBarControl.viewControllers = [NSArray arrayWithObjects:view1,view2,nil];
    [self.navigationController pushViewController:tabBarControl animated:YES];

  • HT4356 How can I set up a Canon MX410 to print from my iPad?

    How can I set up this printer on my iPad?

    If it is not an AirPrint enabled printer
    iOS: AirPrint 101
    you need an app to print via. Search the App store. Start searching for a  cannon printer app and general print app like Print Central

  • HT5622 how can I set a computer into my apple ID from someone else's Apple ID?

    Hi there,
        My father passed away a few months ago and I have inherited his iMac. How can I set his iMac now to my Apple ID instead of his? I am currently still under his Apple ID yet he no longer has e-mail, etc... and I would like to see my things instead.

    The first thing you should do after acquiring a used computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind.
    If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
    After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.

  • Make Button load Words from List

    Hey Guys!!!
    Just a note, I dont know about proramming and I am new to flash so please say you responses in the simplest way possible, thankyou!
    So I am making an app that when you click a button it will randomly select a Who, What, When, Where, and Why from a list that I make.
    So say there is a button that says New Idea.
    When I click the button there is:
    Who:
    What:
    When:
    Where:
    Why:
    Say a small list of who is 1, 2, and 3
    A small list of what is 4, 5, and 6
    A small list of when is 7, 8, and 9
    A small list of where is 10, 11, 12
    And a small list og why is 13, 14, and 15
    How can I make it so when I click the New Idea Button it will select (by random) a who, what, when, where, and why from their lists?
    Please help me saying what to do from making the button make get a word from a list, to what I am asking!
    Please!!!
    Thankyou!!!

    To make a random selection from a list you first have to have the list.  An array makes a good list, so for each category create an array and fill each with whichever choices you intend.
    To randomly pick one of the items in the list you can use the Math methods that Actionscript is supported by.
    var whoList:Array = [1,2,3];
    var randomWho = whoList[Math.floor(Math.random()*whoList.length)];
    Please don't start new postings for the same topic

  • How can I set a right link Aggregations?

    I have a Enterprise T5220 server, running Solaris 10 that I am using as a backup server. On this server, I have a Layer 4, LACP-enabled link aggregation set up using two of the server's Gigabit NICs (e1000g2 and e1000g3) and until recently I was getting up to and sometimes over 1.5 Gb/s as desired. However, something has happened recently to where I can now barely get over 1 Gb/s. As far as I know, no patches were applied to the server and no changes were made to the switch that it's connected to (Nortel Passport 8600 Series) and the total amount of backup data sent to the server has stayed fairly constant. I have tried setting up the aggregation multiple times and in multiple ways to no avail. (LACP enabled/disabled, different policies, etc.) I've also tried using different ports on the server and switch to rule out any faulty port problems. Our networking guys assure me that the aggregation is set up correctly on the switch side but I can get more details if needed.
    In order to attempt to better troubleshoot the problem, I run one of several network speed tools (nttcp, nepim, & iperf) as the "server" on the T5220, and I set up a spare X2100 as a "client". Both the server and client are connected to the same switch. The first set of tests with all three tools yields roughly 600 Mb/s. This seems a bit low to me, I seem to remember getting 700+ Mb/s prior to this "issue". When I run a second set of tests from two separate "client" X2100 servers, coming in on two different Gig ports on the T5220, each port also does ~600 Mb/s. I have also tried using crossover cables and I only get maybe a 50-75 Mb/s increase. After Googling Solaris network optimizations, I found that if I double tcp_max_buf to 2097152, and set tcp_xmit_hiwat & tcp_recv_hiwat to 524288, it bumps up the speed of a single Gig port to ~920 Mb/s. That's more like it!
    Unfortunately however, even with the TCP tweaks enabled, I still only get a little over 1 Gb/s through the two aggregated Gig ports. It seems as though the aggregation is only using one port, though MRTG graphs of the two switch ports do in fact show that they are both being utilized equally, essentially splitting the 1 Gb/s speed between
    the two ports.
    Problem with the server? switch? Aggregation software? All the above? At any rate, I seem to be missing something.. Any help regarding this issue would be greatly appreciated!
    Regards,
    sundy
    Output of several commands on the T5220:
    uname -a:
    SunOS oitbus1 5.10 Generic_137111-07 sun4v sparc SUNW,SPARC-Enterprise-T5220
    ifconfig -a (IP and broadcast hidden for security):
    lo0: flags=2001000849 mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000
    aggr1: flags=1000843 mtu 1500 index 2
    inet x.x.x.x netmask ffffff00 broadcast x.x.x.x
    ether 0:14:4f:ec:bc:1e
    dladm show-dev:
    e1000g0 link: unknown speed: 0 Mbps duplex: half
    e1000g1 link: unknown speed: 0 Mbps duplex: half
    e1000g2 link: up speed: 1000 Mbps duplex: full
    e1000g3 link: up speed: 1000 Mbps duplex: full
    dladm show-link:
    e1000g0 type: non-vlan mtu: 1500 device: e1000g0
    e1000g1 type: non-vlan mtu: 1500 device: e1000g1
    e1000g2 type: non-vlan mtu: 1500 device: e1000g2
    e1000g3 type: non-vlan mtu: 1500 device: e1000g3
    aggr1 type: non-vlan mtu: 1500 aggregation: key 1
    dladm show-aggr:
    key: 1 (0x0001) policy: L4 address: 0:14:4f:ec:bc:1e (auto) device address speed
    duplex link state
    e1000g2 0:14:4f:ec:bc:1e 1000 Mbps full up attached
    e1000g3 1000 Mbps full up attached
    dladm show-aggr -L:
    key: 1 (0x0001) policy: L4 address: 0:14:4f:ec:bc:1e (auto) LACP mode: active LACP timer: short
    device activity timeout aggregatable sync coll dist defaulted expired
    e1000g2 active short yes yes yes yes no no
    e1000g3 active short yes yes yes yes no no
    dladm show-aggr -s:
    key: 1 ipackets rbytes opackets obytes %ipkts %opkts
    Total 464982722061215050501612388529872161440848661
    e1000g2 30677028844072327428231142100939796617960694 66.0 59.5
    e1000g3 15821243372049177622000967520476 64822888149 34.0 40.5

    sundy.liu wrote:
    Unfortunately however, even with the TCP tweaks enabled, I still only get a little over 1 Gb/s through the two aggregated Gig ports. It seems as though the aggregation is only using one port, though MRTG graphs of the two switch ports do in fact show that they are both being utilized equally, essentially splitting the 1 Gb/s speed between
    the two ports.
    Problem with the server? switch? Aggregation software? All the above? At any rate, I seem to be missing something.. Any help regarding this issue would be greatly appreciated!If you're only running a single stream, that's all you'll see. Teaming/aggregating doesn't make one stream go faster.
    If you ran two streams simultaneously, then you should see a difference between a single 1G interface and an aggregate of two 1G interfaces.
    Darren

  • Can I set a bookmarked link to open in the sidebar AND when a new page is loaded/originates from this page?

    Example: I have Google advanced search bookmarked and set to open in the sidebar. When I submit the search, I'd like it to open in the main view port. Is there a way to make links, POST/GET requests or otherwise any new page loads originating from the page loaded in the sidebar?

    So, if I remove a session var is there a way to test for its existence as well?
    Thanks,
    Chris

  • How can I set some space between buttons on the buttonbar

    I want to set some empty spaces between buttons on the button control bar?
    Thank you.
    Scott

    If you mean a JToolBar try addSeparator();
    If you mean a JMenuBar... I don't know!

  • Can't set up D-Link phone adapter DPH-50u on Windo...

    I am moving my phone adapter to another computer running Windows 7.  Install and everything goes well, but the adapter can't communicate with skype, for some reason.  Tray indicator is red.  I have tried different combinations without success.
    Any help would be appreciated.  The adapter is great once installed successfully, but installation is always a problem.  I have installed for friends as well, but always a big deal.  Right now I am frustrated, and thought possibly someone has some suggestions.
    Thank you
    Leon
    *edited for privacy*

    I had the same problem.
    I don't know whether or not it was a coincidence, but I did the following:
    Use a computer to Logon to www.icloud.com.
    Go into Account Settings.
    Click on Advanced.
    Then click on logout of all browsers.
    I was then able to log into My AppleID and start the two step authentication setup. When I added a new phone, it sent an SMS and it then prompted me for the 4 digit code.
    Again, not sure whether this is a coincidence, but I never received the prompt to enter the 4 digit code until I accessed the iCloud website and followed the above steps.

  • How can I change the BlackBerry Link Network Drive mapping from Z: to something else?

    Hello,
    I generally have a mapping to my NFS server on Z:, and my iTunes library has a relative path to Z: for all of my music - the fact that Link is automatically picking Z: as my network sync target for my device does not work for me to sync music, or anything really. I can't figure out how to change this value to something else.
    I found the registry key: \HKEY_CURRENT_USER\Software\Research In Motion\Device Manager\Device Settings\<DEVICENAME>\VolumeMapping with a default blank REG_SZ - can I use this key at all to manually change drive mappings for my device? If so, what is the key/value pair I need and will this mess up any assumptions taken inside the Link software for synching?
    ... Also, I have a Feature Enhancement Request to go along with this issue: Add a "Change drive map letter" button beside the "Turn on wireless connections to my computer" button in Link, and add the same option in the context menu to the 'Device Manager' for the mapping (which currently just says 'Explore').
    Thanks for the help,
     - Jeff

    I do not know a lot about this subject but since Device Manager is not a Device and the BlackBerry Phone is not recognized as a Device in Disk management unless Mass Storage is turned ON it looks as if by design you cannot change the Drive Letter.
    Also if Mass Storage is turned On in the Phone Settings File Manager and BB link will not work but the BB Phone will then be recognized as a Device in Disk Management and the Drive Letter can be changed, this has no effect on the Drive Letters for Device Manager.
    Normally to change the Drive Letter and Paths of a Device once the Device is plugged you would go to Administrative Tools, Computer Management, Disk Management, right click the Device and choose "Change Drive Letter and Paths"
    Changing the Registry or Uninstalling Device Manager but keeping BB Link or looking for a Utility that can change the Drive Letter such as the one that many XP users had called TweakUI (only worked in XP) or changing the Drive Letter for your Network may be the only way.

Maybe you are looking for