Can I set up and register without using VoiceOver?

I have a three yr old iMac which just had it's defective hard drive replaced. I am unable to get past the welcome screen to set up using VoiceOver! How do I navigate to the continue arrow once I've highlighted my country? I don't have an end key on my keyboard

Try pressing hard the trackpad on "Continue".

Similar Messages

Can you set username and password when using OWA_UTIL.REDIRECT_URL?

If you have a PSP that runs under a DAD that includes username and password and therefore doesn't require users to log in and you want it to do OWA_UTIL.REDIRECT_URL to another PSP that runs under another DAD that normally requires login using basic database authentication and the first PSP already "knows" the user's username and password, is there any way to use them to skip the login dialog of the second page? Maybe hack into the request and use UTL_HTTP.SET_AUTHENTICATION somehow...?

That doesn't seem to work, and trying that kind of url directly from the browser says "invalid syntax error", so maybe Oracle appserver just doesn't let you do that.
I got the idea of trying to add an authorization header:
OWA_UTIL.MIME_HEADER(BCLOSE_HEADER => FALSE);
HTP.P( 'Authorization: Basic mybase64encodedcredentials' );
OWA_UTIL.REDIRECT_URL('myurl', FALSE);
OWA_UTIL.HTTP_HEADER_CLOSE;
...but it didn't work either and with a little further thought I guess it's obvious why: any code here modifies the response header for this request, not the request header for the redirect.
Message was edited by:
psalmu

HT4009 I let a child use my iPod and she purchased a lot of doeses for idoser and I did not have the money on my card. Now I can't download anything at all without using a new credit card or paying for it. How do I cancel it

I let a child use my iPod and she purchased a lot of doeses for idoser and I did not have the money on my card. Now I can't download anything at all without using a new credit card or paying for it. How do I cancel it

First, to prevent this from happening again, turn off "In App purchases" in the Restrictions settings on your iPod. You may also want to turn off the ability to install apps, to prevent purchases in case the child gets hold of your iTunes Store account information, and set the password to be required immediately. For more information, see:
http://support.apple.com/kb/HT4213
As to a refund, that's not automatic since the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
http://www.apple.com/support/itunes/contact.html
They're usually pretty lenient in the case of inadvertent purchases by children. No guarantees, though, just as if your child was in a store and ate a bunch of food (in other words, something that can't just be returned).
Good luck.

Problem with setting up new Ipad Air2:I can't set up my new Ipad using new Apple ID and it keeps showing the notification that wrong email or password and try again. I can log in Itune with thesame

I can't set up my new Ipad using new Apple ID and it keeps showing the notification that wrong email or password and try again. I can log in Itune with the same ID. Please help me if you have come across the same issue. Thank you!

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

HT3529 can you set up and save groups of more than 10 contacts for imessages for future use?

can you set up and save groups of more than 10 contacts for imessages for future use?

It can be done by creating a contact for that group which includes all their email addresses all separated by a comma or semicolon. You may have to format it just right depending on the email service you're using. Also, you will have to type this out in Notes first in order to be able to get the punctuation in there, then copy & paste the entire list into the email field of the new contact.

HT4623 How can i download ios 7.1 without using my iphone and itunes

How can i download ios 7.1 without using my iphone and itunes

If you don't use your phone and you don't use iTunes, what are you expecting to use? Your options to update your device are Over The Air through Settings>General>Software Update or by connecting the device to iTunes and updating.
Best of luck.

Can I rewrite the following query without using Row_number() function ??!!

Hello every one, can I rewrite the following query without using the 'ROW_NUMBER() OVER ' part.
The query is supposed to pull out the records whose CODE is not NULL and has most
recent date for UPDATE_DATE . The reason I wanted to do this is, When I embed this query
in between many other queries along with JOINs, My oracle server is unable to execute. So, I thought
its better to supplant 'ROW_NUMBER() OVER ' logic with something else and try it. .
SELECT a.* FROM
(SELECT b.*, ROW_NUMBER() OVER (PARTITION BY b.PIDM
ORDER BY b.UPDATE_DATE DESC) AS Rno
FROM
SELECT *
FROM SHYNCRO WHERE CODE IS NOT NULL
)b
)a
WHERE a.Rno = 1

Hi,
You didn't write over 150 lines of code and then start testing it, did you?
Don't.
Take baby steps. Write as little as pssiblem test that. Debug and test again until you have something that does exactly what you want it to do.
When you have somehting that works perfectly, take one baby step. Add a tiny amount of code, maybe 1 or 2 lines more, and test again.
When you do get an error, or wrong results, you'll have a much better idea of where the problem is. also, you won't be building code on a flimsy foundation.
If you need help, post the last working version and the new version with the error. Explain what you're trying to do in the new version.
The error message indicates line 133. It looks like line 133 of your code is blank. Does your front end allow completely blank lines in the middle of a query? SQL*Plus doesn't by default; you have to say
SET SQLBLANKLINES ONto have a completely blank line in SQL*Plus. (However, lines containing nothing but at commnet are always allowed.)
You may have noticed that this site normally doesn't display multiple spaces in a row.
Whenever you post formatted text (such as indented code) on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
The 4 people who posted small code fragments for you to read all did this. It would be so much easier for people to read your humongeous query if it were formatted.

How can I set PCTUSED and PCTFREE in Warehouse databases?

Hi,
There are many Schemas in our database and some are used for OLTP and some others are used for Warehouse. Also our tablespaces are Local Managed.
Could you help me please how can I set PCTUSED and PCTFREE for Warehouses and OLTP.
What are your suggestions? What should be optimum?
DB version is 9.2.0.8.
thanks & regards

If you are using locally managed tablespaces with ASSM then the pctused parameter would no longer apply. In all cases dictionary vs locally managed with or without ASSM you should set pctfree based on how much of the data row column values are present at initial row insertion and how likely any column is upated to a larger size after initial row insertion.
In a warehouse I would expect most of the tables to have 100% of the row data present at initial insert and for the data to never be updated. For tables meeting this requirement a pctfree of 3 - 5% would likely be a good choice. I never like to use 0% since the day may come when you add another column to the table.
With OLTP tables the ideal pctfree value varies more from table to table. Most table so seem to work well enought with the default 10% but I have seen tables that need 50% pctfree to prevent row migration since only the key column values existed at initial insert and most all the other column data was added later.
Where ASSM is not in use I like to set pctused to 95 - pctfree. Over the last 15 years I am not sure I ever found a need to change the pctused from this once set. I have set a lot of tables up over the years from the old default of 40% to use 60% and 80% before resetting everything during a server platform migration as I mentioned above.
HTH -- Mark D Powell --

We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is: Cannot send mail. The user name or password for iCloud is incorrect.

We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.

About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone. Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc. This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...

My iPhone has two computers in (iTunes wifi sync), how can I remove one of them without using it ?

Hello everyone.
My iPhone has two computers in (iTunes wifi sync) how can I remove one of them without using that computer?
because that PC stopped working so I had to recover it. Now everything is gone on that PC.
Also I bought a new computer (MacBook Pro) and I use iTunes on it in the mean time. Now I want to remove the old computer!
here is a photo of my (iTunes WiFi sync)
is there any way that I can use to do that?
Thanks

Hello,
Did you ever find a solution for this ?
I have the same issue and i dont know how to fix it.

How can I create a new entry without using LOV for foreign keys.

Referring to TUHRA sample application based on HR database schema. JDeveloper 10.1.3.0.4
How can I create a new employee without using LOV for the foreign key "job_id".
On the first page I would like to choose the job_title from adf read-only table.
After clicking on the "create new employee button" a creation form appears in which the job_id field is set with previous selection.
Regards M.Winkler
Edited by: user3541283 on 06.10.2008 03:44
Edited by: user3541283 on 06.10.2008 03:50

Hi,
usually the foreign key is only set if the VO you select is dependent from a master. If e.g. you have DepartmentsVO1 that has an EmployeeVO3 as its nested VO, then creating a new instance of employees automatically add the foreign key. If you add EmployeesVO1, which is not dependent to DepartmensVO1, then the foreign key is not set. So if this is the case in THURA (keep in mind that this is not an Oracle demo but a sample used in a book about ADF) then all you need is to take the independent VO when building the new employee form.
Frank

Can u write the following query without using group by clause

select sp.sid, p.pid, p.name from product p, supp_prod sp
where sp.pid= p.pid and
sp.sid = ( select sid from supp_prod group by sid
having count(*) =(select count(*) from product));
thru this, we retrieving all the products delivered by the supplier.
Can you write the following query without using the group by clause

select sp.sid, p.pid, p.name
from product p, supp_prod sp
where sp.pid= p.pid the above query will still retrieve all the products supplied by the supplier. sub-query is not necessary.
maybe if you can post some sample data and output will help us understand what you want to achieve.

I purchased Photoshop Elements 13 for my Mac which does not have a cd drive. I have already installed Elements 6 many years ago. Can I still install my upgrade without using the cd's?

I purchased Photoshop Elements 13 for my Mac which does not have a cd drive. I have already installed Elements 6 many years ago. Can I still install the upgrade without using the cd?

PSE 10, 11, 12,13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

Can you move between text boxes without using the mouse?

Can you move between text boxes without using the mouse? When I have mutliple text boxes as a template, and then need to move from one to the next can I do it without having to use the mouse to click the next box??

Jon,
Option-Tab will sequence through the tables.
Jerry

Can I access time capsule file without using imac

can I access time capsule file without using imac

From a time machine backup? No. If you mean just a regular file stored on there? Not directly. There are a couple of apps out there where you can indirectly get to a file but it's a pain. If you have need of accessing a file both from the mac and the iPad then I suggest DropBox. You get 2GB free and it's a good way to share information between machines and devices.

Can I set up and register without using VoiceOver?

Similar Messages

Maybe you are looking for