Can I Set Up Bridge To Completely Ignore/Not See MS OneDrive?

Using CC 2014 suite on MS Win 8.1 machine with 3.0MHz CPU, 16 GB RAM, & 7 Tb storage across four hard disks.  Not storing anything on Microsoft OneDrive or using that cloud in any way.  Folders view for Bridge shows OneDrive flickering in and out of availability almost constantly.  Wouldn't care except all folders below OneDrive in the listing jitter up and down, making "open" and "save" functions split-second trials.  Have followed all published MS instructions to disable OneDrive.  Can Bridge be set up to ignore OneDrive completely?

Modem -> Router -> Airport -> Wireless DHCP
                  |
                  |
                 V
            Work PC's Static Ip's
It would be a requirement that the wireless connections were on a seperate network that could not see any of the work PC's
Everything depends on the router ..
If the router offers vlan.. then you can set the airport to a different vlan than the Work computers and it will work fine.. But your setup currently is such that wireless clients behind the airport even if they get a different IP address range would still be able to access the work PC's.
Another possible method is to use secondary IP address in the router.. this is same idea as vlan really but some routers offer IP alias.. or secondary IP.. it has a number of names.. This would not fully protect the computers on the main IP address range but via firewall in the computers will effectively do so. It would be important to make sure the local firewall is setup and running.

Similar Messages

  • OIM-How can i set a password policy which does not contain any space?

    How can i set a password policy which does not contain any space?
    I put space at Characters not allowed but it is not working.
    Can anyone help me out?

    You can go to Settings>Messages and turn off Messages. Then go to Settings>General>Restrictions and turn on the the Restriction that prevent changing accounts.
    I just verified that it works.

  • How can i set my calendar start from Monday NOT Sunday like it is now?

    How can i set my calendar start from Monday NOT Sunday like it is now?

    Read this thread: https://discussions.apple.com/message/11501621#11501621
    For example, if you set the Regional format to United Kingdom, the days will be re-ordered but it will have other effects as well which you probably don't want.

  • How can I change the margin settings in the pages inspector to make them more specific for label templates. I need margins that can be set to hundreths of a centimetre not just tenths.

    How can I change the margin settings in the pages inspector to make them more specific for label templates. I need margins that can be set to hundreths of a centimetre not just tenths.

    I doubt you need hundreths as you would not even be able to measure that and the printer doesn't hold the paper to those tolerances.
    fruhulda is right. Pages accepts higher measure but rounds it in the measure field.
    If you want absolute accuarcy you need to set your measures to points. Everything else is being recalculated.
    Peter

  • When I upgraded my MacBook to Lion the trackpad switched and now up is down and down is up. I tried to fix it in setting, track pad but I do not see an option. Is it somewhere else in settings?

    When I upgraded my MacBook to Lion the trackpad switched and now up is down and down is up. I tried to fix it in setting, track pad but I do not see an option. Is it somewhere else in settings?

    You are very welcome...there are many little boxes to check/uncheck...can be a real challenge to read all of the fine print

  • I have an iPad with IMAP email accounts set up but I can find no "inbox, drafts, trash" folders anywhere, either on my ipad or desktop Mac.  How can I set them up?  They do not show on my MacMail preferences either and I can find no way to add them.

    I have an iPad with IMAP email accounts set up but can find no "inbox, drafts, trash" folders for each email account anywhere on my iPad or in Mac Mail.   How can I set them up? I can't find anyway to set them up anywhere.  Thanks

    Hello blu monkey,
    I found some resources that I think might help with the visibility of your IMAP email folders on your iPad and Mac.
    On your iPad, you may need to follow the steps in this article to make sure your folders are visible:
    iOS: If IMAP Mail folders are not visible
    http://support.apple.com/kb/HT1393
    On your Mac, I am not sure if you have the sidebar enabled, but you can enable it using the steps in the article below.  When this is showing, you should see your email account listed near the bottom with a triangle next to it.  When the triangle is pointing down, it should show your folders:
    Mail (Mountain Lion): Show or hide the sidebar
    http://support.apple.com/kb/PH11763
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have three iPhones using the same iTunes account, can we set something so that we are not all getting everyones txt messages to all phones?

    I have three iPhones using the same iTunes account, can we set something so that all our txt messages are not appearing on all phones?

    Settings > Messages > Receive At...
    Any iPhone that lists the same email will receive the same texts. This has to be changed in order to stop receiving on all devices.

  • How can i set my bridge cs4 to open photoshop cs3 as a defualt

    i have bridge cs4 and would like to set photoshop cs3 as my default(open with)

    In Bridge preferences, go to File Associations and set it there.
    You may have to deselect Camera Raw in Photoshop File Handling preferences too.
    There is also a setting in Camera Raw preferences!  

  • How can I reinstall CS/Bridge when they do not appear in NW's Control Panel programmed delete listing?

    Bridge in CS6 is returning the error message "Bridge has encountered a problem and cannot read the Cache."  Purging install the software.  However, for some unexplained reason, neither programme is listed under the programme delete option in W7 control Panel.  Is there any other way of safely deleting CS6 and Bridge so that I can reinstall both.

    Bridge does not have an uninstaller, because it does not have an installer. Bridge automatically gets installed when installing an Adobe application. Thus the only way to uninstall it is to remove the Adobe applications it is attached to. So you have to remove all CS6 applications to remove Bridge CS6. However, uninstalling Bridge will not purge its cache, this will be left behind. You can purge the cache at launch by holding down the Command+Option+Shift (Mac) or Ctrl+Alt+Shift (Win) while launching (you have to be quick to get the timing right). Choose the Purge Entire Thumbnail Cache option in the Reset Settings dialog that appears.

  • How can I set a second Airport Extreme to not allow wireless clients?

    I have two Airport Extremes. One is the main, and one is a remote unit used to extend my wireless network. I only want the remote Extreme to be able to use the LAN ports via ethernet to provide connectivity to my home theater gear. I don't want it to allow wireless clients, even though the two Extremes are wirelessly linked. Is this possible? I know it is on the Express, and I'd like to do that here. Thanks.

    A simple solution might be.......
    Use AirPort Utility 5.6 or earlier and click the Manual Setup option on the extending Extreme.
    Click the Wireless tab below the row of icons
    Wireless Mode should be set to "Extend a wireless network"
    Remove the check mark next to "Allow wireless clients"

  • HT2963 Can't set JPGs to open in Photoshop not Preview- forum suggested this is Permissions issue

    I've repeatedly used "Open with" > "Other" > "Adobe Photoshop CS4" > "Always Open With" and it works only with that particular JPG. In a Photoshop forum, someone suggested this is a Permissions issue. Is it? If so, how do I fix it? (I have no UNIX-type experience. This is Mavericks OS X 10.9.2.) Thanks to anyone who can help!

    Control (right) - click on the file and select Get Info from the contextual menu:
    In the Info window select Photoshop as the app to open it with and click on the Change All button.

  • Using weblogic.servlet.FileServlet - can it set expiration date to '0' and not cache the page?

              Hi!
              I'm using WebLogic 7.0.2 and using the weblogic.servlet.FileServlet to serve up
              various
              pages (HTML, Word, Powerpoint). If I change an HTML file and access it agin things
              are find
              since the default expirationdate for it is '0' - however if I change a Word file
              and reaccess it
              again I see the previous version of it. I have to clear out the cache and view
              it again in order
              to see the changes. Is there a way to use the weblogic.servlet.FileServlet and
              force no
              caching or a reload with every access?
              Thanks!
              -Lori
              

              Well I never heard anything so I just created a servlet that inherits from the
              weblogic
              FileServlet and puts in the expirationdate in the header before passing it on
              to the
              super class. It works fine.
              "Lori Ronning" <[email protected]> wrote:
              >
              >Hi!
              >I'm using WebLogic 7.0.2 and using the weblogic.servlet.FileServlet to
              >serve up
              >various
              >pages (HTML, Word, Powerpoint). If I change an HTML file and access
              >it agin things
              >are find
              >since the default expirationdate for it is '0' - however if I change
              >a Word file
              >and reaccess it
              >again I see the previous version of it. I have to clear out the cache
              >and view
              >it again in order
              >to see the changes. Is there a way to use the weblogic.servlet.FileServlet
              >and
              >force no
              >caching or a reload with every access?
              >Thanks!
              >-Lori
              

  • I set up family share but do not see any shared content

    I set up Family share and can see my wife's name listed but there is no shared content, specifically iBooks.

    Hey Adolman44,
    Thanks for the question. The following resource may provide a solution:
    If you don't see your family's shared content
    http://support.apple.com/kb/TS5449
    Thanks,
    Matt M.

  • HT202213 why after setting up home sharing I do not see all my movies on one of my computers?  I only see the movies I downloaded to the specific computer but no sharing?

    I tried setting up my home sharing on itunes but after doing so on both computers with same id and password, it still does not show the same material as in movies on both imacs, what am I doing wrong or how do I fix.

    Look in Home Video or change the tags in iTunes to Movies.

  • Can't get Airplay to work. Do not see icon

    Hello,
    I have updated FW on Airplay compatible receiver (Denon 2312), updated iPad 3 to ios6, opened the ports: TCP 443, TCP 5297 and UDP 5351 in NAT.
    MAC address authentication is disabled, I have WPA2 (mixed) password on wi-fi.
    Anyone has any tips on why it does not work? Did not work on ios5 either, just updated to 6 to see if it worked, but no..

    If your router is a dual 2.4 and 5Ghz router then one device could be connected on 2.4 while the other is on 5.
    You might want to get with your router manufacturer on how you see this, whether it is Bonjour compatible, and which setup on the router you need to use for the iDevice to see your receiver.

Maybe you are looking for