Can i set up network fax using HP LaserJet 200 colorMFP M276nw

is it possible to use the HP LaserJet 200 colorMFP M276nw as a network shared fax device?
it is set up as TCPIP wired device and works perfectly as a shared printer on a windows network.

Hi there dilligas, welcome to the forums
I saw your post about using your LaserJet 200 color M276nw as a network shared fax. Unfortunately, I do not see this in being possible.
This is information from the Microsoft forums on printer sharing: Share a printer
Have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

  • HP LaserJet 200 colorMFP M276nw-Can't print custom sized paper

    HP LaserJet 200 colorMFP M276nw
    I'm trying to print on a custom page Size (95mm x 171mm) but it starts printing about a third way down the page so the whole text insint printed. I adjusted the paper tray to the right size, canged the page size to my custom size. I tried to scale to destination paper size but the custom size wasn't in the drop-down menu (To get to the  destination paper size: Mac OSX-File>Print>Paper Handling>Destination Paper Size area>Scale to Fit Paper Size box> Drop down list | Windows-Print>Properties or Prefrences>Effects>Print Document On box>Drop down list) So I don't know what the problem is because the size in bigger than the minimum(76mm x 127mm)
    PLEASE HELP!

    Welcome to the HP Forums dancer200013,
    I see by your post that the custom size isn't printing correctly on the Mac or Windows computers.
    I can help you with this issue today.
    On the Windows computer, click on start, control panel, printers and faxes, right click the printer, left click properties, click preferences, the effects tab should be selected as actual size. Then select the Paper/Quality tab. Click on the custom button. Type in the size, type in a name you want to use, select save and OK. (if the name is too long the save button won't be active)
    Close the preferences window and reopen it again.
    Then on the paper/quality tab or Printing Shortcuts tab. Under paper size select the new paper size by the name you just created.
    Test the printer.
    Hope this helps.
    Have a nice day.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Authentication is required to set the network proxy used for downloading packages

    hello all,
    we bought a Sun X3-2 and our reseller installed OL6.5 and SRS 5.4.2. When user logs in, a window occurs regularly, displaying this message.
    Authentication is required to set the network proxy used for downloading packages
    After click on Cancel, the window re-appears then minutes after. It seems that it is related to polkit:
    /usr/libexec/polkit-gnome-authentication-agent-1
    Can i stop this service? Are there any hints to tune Oracle Linux when using sunrays? users don't need to update packages because the server is managed.
    thanks in advance for help,
    gerard

    i'm not fully agree with you, this problem arises because i'm using sunray. But you're right, i found the solution when searching on the net, not in oracle forums.
    The solution is to create
    .config/autostart/*.desktop
    with:
    X-GNOME-Autostart-enabled=false
    it seems ok, even if i have other problems, for instance, firefox and thunderbird crashing regularly, even if i'm up to date with packages (uln too).
    In the past, i used to use sunrays with solaris 10, it existed a document to tune gnome when using sunrays, i don't find the same thing with oracle linux.
    thanks for your reply,
    gerard

  • Can you set up apple tv using 2 different itunes accounts from 2 different macs in same household?

    can you set up apple tv using 2 different itunes accounts from 2 different macs in same household?

    No, you can only connect to one Home Sharing account at a time. If you want to see the content of the other Mac's library you will have to turn off Home Sharing on the Apple TV and log back in with the other iTunes account.

  • HOW CAN I SET TIHE NETWORK TIME BECAUSE IT DOESNT ALLOW ME TO SING IN

    HOW CAN I SET TIHE NETWORK TIME in the apple tv BECAUSE IT DOESNT ALLOW ME TO SING IN

    Welcome to the Apple Community.
    Time and date should be set automatically by the network time server. There has been a number of posts reporting this problem. Solutions have involved:
    Restarting the Apple TV by removing ALL the cables for a few moments.
    Restoring the Apple TV.
    Opening port 123 on the router.
    Ensuring the DNS address on both the router and the Apple TV are those provided by your ISP.

  • TS2972 Can I set up home sharing using my ipad only - my computer is broken?

    Can I set up home sharing using my ipad only - my computer is broken?

    I believe the first requirement of home sharing is a computer using the latest version of iTunes http://www.apple.com/support/homesharing/getstarted/

  • Can I set a schedule for use of the internet with this router?

    can I set a schedule the internet?

    The Airport Express is not a router
    The AirPort Express is most certainly a wireless router, capable of 10 wireless connections. See the lit and specifications for more details on this router.
    AirPort Express
    In addition, using the Timed Access feature on the Express, it is possible to establish daily time limits for all devices that will connect to the network.
    This can be done globally for all devices, or individual time limits can be established for each separate device that connects through the AirPort Express.

  • HP 6300 all in one can't set up for wireless use

    can't set up for wireless use

    That is because the printer does not support wireless connectivity to a router.  You can with an optional Bluetooth adapter to one computer wireless.  However since this has an Ethernet connection you can connect it to your router via this or you can use the below information to convert your Ethernet wired printer to wireless.
    Connect wireless printer anywhere, convert from wired, bypass failed radio, add WPA2 security.
    http://h30434.www3.hp.com/t5/Printer-Networking-an​d-Wireless/Connect-your-wireless-printer-when-away​...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How can I set ne2000 network adapter in Solaris 8 for x86

    I am a beginner. I can not set a ne2000 compatible network adapter(isa) in Solaris 8 for x86.
    I do follows:
    write the file ' /kernel/drv/nei.conf ' with ' name="nei" parent="isa" reg=0x1,0x0300,0x1f interrupts=10 '
    and use the command: drvconfig -i nei --failed
    use the command: drv_add -i nei; devlinks; --there is no the command drv_add
    use the command: touch /reconfigure; reboot
    after reboot, use the command: ifconfig nei0 plumb --failed
    Did I miss something obvious, or what driver should I use?

    After backing up the suspect hard drive, I ran Disk Repair on it and found no problems. Then ran Disk Warrior again and no problems. It is a Hitachi, btw.
    As for the PrefPane issue: Repairing disk permissions on the main volume and on the partition that holds the system did not make any difference.
    Reinstalled the 10.5.8 upgrade, performed safe start and then repaired permissions again. Still getting a blank PrefPane for network.
    Next step is to try and trash the System Configuration plist and Network Interfaces plist.

  • How do I set up my fax using my phone number?cc=us

    Need instructions to set up fax using my phone number

    Hi shea31,
    Unfortunately, this printer doesn't have a fax function. You can also check the printer's product specifications.
    ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
    Cheers!
    * If this post has helped you, the White Kudos star on the left is a great way to say thanks!
    * Please mark Accept As Solution if it solves your problem so other users can benefit as well.

  • How can I set Office Communicator to use my Outlook settings

    dears
     i use the business exchange mail from vodafone egypt
    in work i can use outlook to see my mails and also office communicator
    but here in home i can only use OWA and outlook and i cannot set the Communicator to use my Outlook settings 
    i also tried to use the same settings that already set on the work but i cannot login to it
    so please help me to open it
    sorry about my English not good :)

    Looking to do voice overs? See iMovie '11: Record a voiceover

  • How can i set  "Createdby" attribute  When using Custom JheadStart Security

    Hello
    We do not use JASS for Authentication , please help us how can i set createtby attributes with jhs.username in application for any entity object?
    thanks

    See a similar question at History Attributes when using Custom Authentication Type

  • How can i set the network time on my appleTV?

    Since the last update I have been unable to use my Appletv.  It says it can't get the network time.  I've restarted my router and unplugged the appleTV numerous times.  I've heard others have this problem too.  What is the solution?

    Log into your iCloud account on your computer, then click your user name in the right top then click on the time zone in the popup window. 

  • TS2972 My Apple TV 3 can not set time network, since one week from now, before was working perfectly

    My Apple TV 3 just stop working, it can not set the time network I have call for support and done everything as requested and still nothing, can somebody help me with This it has pass a week and nothing yet. I even restored as support toll me too, no timé still can be set. HELP PLEASE

    I have the exact same problem as KAR1973, and have tried everything.  Relatively new latest Gen ATV, worked fine for couple  months, then suddenly today will not set network time, will not activate, and only shows the "computer" and "settings" icons on menu screen.   Will not allow me to log into AppleID/Itunes account.
    Very frustrating.  Tried resetting, restoring (on screen and directly connected to Itunes) mutliple times, rebooted router multiple times, even checked the ntp settings in router (get network time shows as "enabled"), tried it all on wireless and ethernet, and still same problem. 
    Appears many people have same problem based on google searches.   My question is what is Apple doing about this??  Am tired of spending hours trying to figure this out, so am putting it away, and will buy a Roku or another competitor's box instead. 
    Apple needs to do a better job standing by its product, figure out what the problem is, and put out some helpful guidance, particularly for people who don't have advanced computer or network expertise (inculding myself.) 

  • HELP!  Can i set up mail application using my MSN hotmail account????

    can i use my hotmail address in the mail application, and how can i set it up??? i can't seem to figure it out!!!!

    Unfortunately hotmail requires you to pay a fee to have your e-mail go through a mail application, like Apple Mail. Contact their customer service to see about fees, as well as set up process.
    Cody

Maybe you are looking for

  • Ipod isn't recognized by Itunes or Windows

    Hi all, I have recently sent my Ipod, which is less than a year old, to be checked over by the Apple technicians as it would not switch on nor be recognized when I connected it to the computer. They returned it saying there was no problem and if ther

  • All java balloon tops are in non-english

    I have deinstalled and reinstalled java version 1.6.0_11 but for some reason on my XP pro machine I am getting java text in a non-english lanuage. If I open the java control panel and hover over any of the buttons instead of seeing the brief descript

  • MBP shuts down when connecting to power

    Since a week or two, my MacBookPro from early 2011 shuts down when connecting the magsafe to power. Also when starting up again it will start up fine and fast from battery, but I need to hold the power button for several seconds when connected to pow

  • Java SDk and Java JRE?

    Do I need both the Java 2 SDK and Java 2 JRE(both standard edition) in order to make Java applications? If I do, how do I get them to work together? Which do I install first? Where should I install the SDK in order for it to work with the JRE(and vic

  • How to change the order of fields when exported to csv

    I am using LiveCycle Designer 8 and have created a great form with the correct tab order. However, when the form is filled in and returned to me, the fields in the CSV file are all over the place. How can I make sure the fields in the CSV file are di