Can i set up standby in Single system

Hi all,
Can i setup the standby in single system?
If yes, my primary DB in C:\ORACLE i want to set up my standby DB in E:\ORACLE. I am trying to do the setup, but iam getting the problem at standby control file.
1) I cann't give the same name for the databases, if i give we cann't open the databases in exclusive mode
2) If i give different DB name for stand by DB, my standby control file is not identifying the new DB name.
Please give me the solution...
Thanks in advance
Mahi

Thanks murlib , After updating this thread , realized I have not mention about some lock parameter and exact name (lock_name_space) is not coming to my mind and in btw you updated name, Thanks. With out this parameter no-way 2 database with same db_name can start, because lock file in $ORACLE_HOME/dbs created using this parameter only.
Cheer,
Virag

Similar Messages

How can I set document date automatically as system date?

I use FBV1, FBV2, F-02, FB02. Posting date is automatically set as system date. I want to set document date automatically as system date.
How can I set document date automaticall as system date?
Wbr.
İlker Çokkeçeci
Computer Engineer
Ankara, Turkey

Hi Expert,
Please refer the below link..
Document date to be defaulted as system date for all FI transactions
as there mentioned, please go to T-Code: SHD0.
Regards,
GK
SAP

Can you set a global EntityResolver (via system property, or static method)

I'm trying to set a customized EntityResolver (telling the xml parser where to look for XML schema files).
Usually, you'd use the standard syntax - somehting like:
SaxParser parser=new SaxParser();
parser.parser.setEntityResolver(myResolver);
However, I was wondering whether you can set a "global" EntityResolver, to be used as default for all parsers ?
Maybe this can be done through some system property, or a static method somewhere in the parsing XML ?
(BTW, I need it because I'm using some third-party API, that encapsulates a SaxParser, but won't let me access it, so I can't configure it directly).
thanks.

I don't think you can.
What is possible is to set content on the folder resource itself; that would be returned instead of the page you mentioned.

Can I set Boot class loader or system class loader?

In my application, there are classes in a jar files, all these files in the jar need be loaded by a ClassLoader in my application.
And the classes out of jar do not need the ClassLoader to load. the structure is like :
-----myapp.jar ------in this jar, all classes need be loaded by a specified ClassLoader
|---anoapp ------classes in this package, is normal classes
|-------|----a.class
|----b.class
| ----other classes
but my a.class need to access a class in myapp.jar, so I load the class use my ClassLoader, but there still occur
**********ClassFormatError : bad magic number**************
I print the classloader in a.class
+---- System ClassLoader is : com.sun.misc.Launcher$AppClassLoader    ------------it is not my ClassLoader
+---- a.class.getClassLoader is same as System ClassLoader    -------------------it still is not my ClassLoader
+---- Thread.currentThread().getContextClassLoader          ------------------ it is my ClassLoader
So I think when I access class in myapp.jar, it will loaded by System ClassLoader or Bootstrap ClassLoader, if I can set one these two classloader as my ClassLoader, it maybe not occur the Error,
But There are not obvious method in System or Runtime etc.
1. So can Set System Classloader or Bootstrap ClassLoader?
2. If not, How can solve my problem?
Thands in advanced!

**********ClassFormatError : bad magic number**************If you get that error, then no classloader will help you. This is a problem with your running code meant for a newer version of the Virtual Machine in an older version.
Looks like you're compiling the code with a recent JDK (1.4.x?), but running with an older VM. Try just typing "java -version" and see what it prints.
This should just be a matter of running with the right VM. If this is an applet you're trying to run inside the browser, make sure that the browser is using the right VM. Run the "Java Control Panel" and select the correct version.

Can you set permissions to a help system?

Hi -- i am creating a helpsystem and was wondering if with RoboHelp 8, i can limit who sees which book/Topic?
We need this because certain customers who will view this help system will not be able to see the certain parts of the application. They have certain rights for each application.
My fear is that i will have to create separate helpsystem projects for each of the different pieces...
If anyone has ANY ideas -- thank would be great! Thank you!
Allison

Hi Allison. This can't be handled from within RoboHelp but you have the following options.
Firstly, the application installation could check the user's licence and only install the relevant help files. If you are outputting CHM files, this is fairly straitforward as you just have a CHM for each licenced area and the application installs the relevant ones.
Secondly, use WebHelp output to a website or internal server. You could then apply security to the output files as required.
Lastly you could output WebHelp Pro output to a server using the Robohelp Server 8 application. This has the concept of protected areas that only users with the correct logonb and password can access.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.

Root CA-How can I set my server the single CA in my own intranet?

I have some confidential network(without any internet connection).
How can I generate FULL certificate chain with my own CA (without requesting any external certificate)? Software is Solaris 9 (Sparc) & SunONE Portal Server.
Sincerely.
Yurry A. Buharkin

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
<welcome-fiile-list>
<welcome-file>over.jsp</welcome-file>
</welcome-file-list>
</web-app>
please see the above.
i have saved my jsp files in the root dir of webapps. in c:/tomcat/webapps/root/web_inf/web.xml , the content of this web.xml is as shown above.... but it still dont work .... how i can i rectify this problem.
really thanks a lot

How can I set up a 2nd user on mac pro

want a family member to be able to log in on my desktop mac without access to my applications. How can I set up 2nd user?

System Preferences > Accounts > ...
Click on the lock in the bottom left and enter your Admin Username and password.
Click on the Plus [+] button under the left column.
Create a new user, generally NOT [ ] allow user to administer this computer.
This user is completely separate, can have their own email, their own desktop, and cannot mess up your settings on shared Applications or email. They WILL have access to Applications in /Applications, but not the ones in /Users/<yourname>/applications.
If you need additional restrictions, use Parental Controls.

How to set to bold a single word in the text box?

How can I set to bold a single word in the text box? When I try, it puts the whole text bold.

you should do this by HTML way
like this :
sym.$("your text box Name").html("Hello i'm <strong>Bold</strong> one")
Zaxist

Can Windows Server Backup spread a single backup job across multiple disks if they are not set up as a virtual disk?

This may be a dumb question, but I can't seem to find any definitive information after having done many, many searches. Short question is - can Windows Server Backup spread a single backup job across multiple disks if they are not in a storage
pool or some other RAID/JBOD structure?
Background:
I'm running Server 2012 Essentials with all Windows Updates installed. I have been backing up approx 2.8TB of data (Bare Metal Recovery, C:, S: (shared folders), and system reserved) for the past year+ onto a storage pool made up of two-2TB external
USB drives. Backup is slow (takes approx 1.5 days to complete), but generally works. Not surprisingly I was constantly getting capacity low messages so I decided to increase my backup storage pool by adding a 3TB drive and another spare 750GB drive
for a total of 7.75TB. Instead of having four separate external USB enclosures, I bot a 4-bay enclosure - Startech.com model #S3540BU33E to simplify this (or so I thought!).
The first problem I had was adding the two new drives to the existing storage pool. I think that is because the Startech uses a JMicron USB controller that reports identical uniqueid's for all drives so only one shows up in the GUI interface for creating storage
pools. After doing research on this, I set up a new storage pool and virtual disk using all four drives via Powershell and thought I was good. However, when the backup ran, it failed after filling the first drive, saying there was no remaining capacity. In
reality there were three remaining empty drives and there storage pool reported almost 5TB of avail capacity. I assumed this was due to the identical uniqueid issue so I decided to try a different tactic.
Instead of using a storage pool that combines all four disks into one virtual disk, I just added each of them to Windows Server Backup as individual drives thinking it would manage them collectively. I.e., when a drive filled up during a particular backup,
it would just start using the next drive and so on. Apparently this was a foolish assumption because the backup failed again as soon as the first disk filled up.
So now I don't know if this is still an issue with the identical uniqueid's or if Server Backup actually can't spread a single backup across multiple individual drives that aren't in a pool or other virtual disk implementation. Hence, my original question.
My guess is that it does *not* spread them across individual disks, but I just wanted to get confirmation.
Thanks

Mandy,
Thank you for following up on my question.
Unfortunately the article you referenced doesn't address what I am trying to accomplish.
The article focuses on saving the same backup job to multiple disks and rotating the disks between on and offsite for enhanced protection. However, it still requires that an individual backup job fits on a single disk.
What I am trying to determine is if a single backup job can span across more than one physical disk (during the backup process) without those physical disks being in some type of virtual disk implementation (e.g., storage pool, RAID, etc.).
Thanks,
Gerry

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

Can 2 icloud ids be set up on a single pc?

i have 2 4s handsets with different numbers. can i set up 2 different icloud ids on a single laptop?

No, you can't ... but there's no need for that if you use the same apple id on both handsets. icloud refers to your apple id, not your phone number.

Everytime my AppleTV2 enters into sleep modus it requests again the WIFI network password. This is new, where can I set the system to remember the password?

Everytime my Apple TV 2 enters into sleeping mode it requires my WIFI network password again upon reconnection. This is new, how can I set the system to remember the password?

Open Mail preferences, click on the Accounts icon in the toolbar then select your mail account, click on the Mailbox Behaviours tab on the right. Set the dropdown menu at the bottom for the Never option.
However, you cannot change the default options set for a newly created account.

How can we set two events in a single button ???

HI
I created a button named bold , when i click it first time the textarea texts will became as bold..
I created another button bold cancel when i click at that button textarea texts will became plain...
But how can i set that controls in a single button (in button bold) ???
Would anybody please tell me ...

I would have one event listener that is aware of a boolean variable that has scope outside of the event listener, isBold for instance?
When you click on the button, have the event listener toggle the boolean variable and then if true, set the text to bold, if false set the text to plain.

How can i set SINGLE PAGE. ENABLE SCROLLING as default view?

how can i set default setting for view? I would like to set DO NOT SHOW GAPS BETWEEN PAGES. SINGLE PAGE. ENABLE SCROLLLING as default view.

For viewing PDFs without embedded IV options you can set values under Preferences > Page Display, but if a file has the zoom or scroll mode defined in its properties, those will always win over the application defaults.

System Preferences can't set date and time and other odd behaviour

I have a 2008 Macbook Air, which is beginning to show signs of age, but now appears to have taken on a terminal problem. I can't set the date and time in the system preferences, even when connected to the internet - the pane just comes up as faded out and I am unable to do anything. The problem started after I accidentally allowed the battery to run down without having shut down the computer and it automatically assumed a date of 1 Jan 2001. I am unable to perform any updates on the machine until the issue is resolved, according to software update.
Other strange things that have happened are that the trackpad no longer responds to the 'tap to click' function or 'two finger' click. In system preferences, I cannot edit energy saver, network (advanced) or account settings - attempting to do so brings up more faded panels or an error message after failure to load.
Has anyone seen similiar behaviour on their mac or have suggestions as how I might resolve the problem?
Thanks!

If this is recent, what has changed since the last time D&T worked correctly?
I see that your Question has languished for some period of time without response. You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to " Using iPhone " where it may get a more rapid response from your fellow users.
ÇÇÇ

Can i set up standby in Single system

Similar Messages

Maybe you are looking for