Can I set up to have every event send notice

last year I was able to have the Entire season for a hockey schedule give a 2 hour on screen advance notice.
I cannot remember how I accomplished that or if Snow Leopard is different now.
I set it up this year but there is no automatic notices other then me having to manually do each of the 80 games.
Can a alarm or notice be done for all events in iCal ?
Greg

Greg,
Perhaps someone can prove that needs to be done which would be the 2% uncertainty.
You should be able to do that because you know which hockey schedule you used.
Is it a calendar subscription? If so, just delete it and make sure that the alarms are checked as you desire before you re-subscribe. If not, how were the matches entered into iCal?
;~)

Similar Messages

Can I set it to have no bullet/blue icon for first line on Outline view?

Goodgrief... After finally figuring out (kind-of) how to place my bullet points with hotkeys, 6 hours later I have iWork 09 with a great outline view! HA!
Outline will be great if it is customizable. I need the first line to be set at a "normal" margin, and then from there on the tab is increased indents and bullets.
How can I set it so that when I "shift-tab" enough it returns to the left margin and remains, with procedeing "enter" clicks, and the outline/bullets begin with the FIRST TAB indent?
THanks!!!!!!!
Also: can we change the default blue bullets to the same options with bullets in general?

Hi, we're mixing two different ideas I had. The first idea was to hide certain columns automatically in the same table when I entered print view. The second idea was to create a second table on a separate sheet that automatically replicated the values in the columns from the first table, I just wouldn't make columns for the things I wanted to hide.
Problem was, with the second idea, I only want to use as many rows as is needed for each quote. I'd like to start each table with just one row, and each time I add a row in the first table, I'd like the second table to automatically add a row.
This isn't really a crisis (I could just make the second table with 100 rows and delete the unused ones), but my technically-challenged boss is using it, and it would be nice if it worked exactly the way our FileMaker system works.

Can You set a Default Email Address when sending Emails

I have multiple email accounts set up. When I compose a new message, it always uses the send address of the message that is selected in the open window. Is there anyway to set a particular address as default or better yet don't pick an address and force me to select one from the pull down list?
Doug Eaton

Hello Doug.
Copied from Setting the account your email is sent from.
If you have set up multiple accounts in Mail, when you create a new message, the account the message is sent from is the one associated with the currently selected mailbox. If the current mailbox is listed in the On My Mac section of the mailbox list and is not associated with any particular account, then your message is sent from the first account listed in the Accounts pane of Mail Preferences.
You can select a different account to use to send the mail.
To send a message from a different account, choose the account from the Account pop-up menu when you're composing the message.
To change the order in which accounts are listed in the mailbox list, drag the account names into the order you want. You can also rearrange the account order in the Accounts pane of Mail Preferences.
Tiger Mail includes a default email account selection when selecting New to compose a new message regardless which mailbox is currently selected.

How can I set up imessage on iPhone to send messages from the name of number but not e-mail.

I can set up iMessage on Macbook to send from the name of number, but can't do it on my iPhone after upgrading to 6.1

If your iPhone and iPad are both running iOS 6, and your iPhone successfully registered it's phone number in Settings>Messages>Send & Receive, all you should have to do on your iPad is go to Settings>Messages>Send & Receive and sign in with the same Apple ID you are using on your phone.
If it is, and it still isn't working, try going to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in.

Is there a way to set an alert for every event in a single calendar?

Hi all,
Is there a way to globally set an event in just one of the calendars showing in iCal?
For example, I have a "Birthday" Calendar with a bunch of birthday events. I want to set the alert for all of them to, say, noon, without having to edit each and every one.
Thanks!
Greg

To generally add an alarm to all events in a specific calendar you would need to program an Automator Workflow that passes all events of the calendar to an Applescript that adds the alarm.
For your birthdays problem is a predefined solution iCal: If you enter the Birthdays on the cards in your Address Book, and enable the "Show Birthdays Calendar Flag", then you will receive automatic email notifications of upcoming birthdays.

How can I set a property when an event happens? (selection changed on datagrid)

I have a datagrid, I would like to change the backgrund of the datagrid when the selection changed event is fired.
I can not use data trigger, because is in the case that I expected a value, but in this case is when change, to any value.
An option is to use an event trigger, but all the examples that I have found is to use with an actions, and I just want to set a property.
How could I do that?
I am using MVVM pattern, so I would like to avoid the use in code-behind.
Thank so much.

You could use an event trigger and implement your own TriggerAction<T> that sets the background property. There is an example of how to create a custom TriggerAction available here:
http://stackoverflow.com/questions/942548/setting-a-property-with-an-eventtrigger.
The following example sets the Background property of the DataGrid to a red SolidColorBrush when the SelectionChanged event is fired. It should give you the idea:
<DataGrid x:Name="dgrid"
xmlns:local="clr-namespace:WpfApplication22">
<i:Interaction.Triggers>
<i:EventTrigger EventName="SelectionChanged">
<local:SetPropertyAction PropertyName="Background" TargetObject="{Binding ElementName=dgrid}">
<local:SetPropertyAction.PropertyValue>
<SolidColorBrush>Red</SolidColorBrush>
</local:SetPropertyAction.PropertyValue>
</local:SetPropertyAction>
</i:EventTrigger>
</i:Interaction.Triggers>
<DataGrid.Columns>
namespace WpfApplication22
public class SetPropertyAction : TriggerAction<FrameworkElement>
public string PropertyName
get { return (string)GetValue(PropertyNameProperty); }
set { SetValue(PropertyNameProperty, value); }
public static readonly DependencyProperty PropertyNameProperty
= DependencyProperty.Register("PropertyName", typeof(string),
typeof(SetPropertyAction));
public object PropertyValue
get { return GetValue(PropertyValueProperty); }
set { SetValue(PropertyValueProperty, value); }
public static readonly DependencyProperty PropertyValueProperty
= DependencyProperty.Register("PropertyValue", typeof(object),
typeof(SetPropertyAction));
public object TargetObject
get { return GetValue(TargetObjectProperty); }
set { SetValue(TargetObjectProperty, value); }
public static readonly DependencyProperty TargetObjectProperty
= DependencyProperty.Register("TargetObject", typeof(object),
typeof(SetPropertyAction));
protected override void Invoke(object parameter)
object target = TargetObject ?? AssociatedObject;
PropertyInfo propertyInfo = target.GetType().GetProperty(
PropertyName,
BindingFlags.Instance|BindingFlags.Public
|BindingFlags.NonPublic|BindingFlags.InvokeMethod);
propertyInfo.SetValue(target, PropertyValue);
For more information about how to hook up event triggers and handle events in MVVM, please refer to my blog post:
http://blog.magnusmontin.net/2013/06/30/handling-events-in-an-mvvm-wpf-application/
Please also remember to mark helpful posts as answer.

How can I set music to occur every hour in Itunes?

Hi,
I would like to set up music to go on every hour for 1 minute and then shut off or perhaps specific hours. Does anyone know how to do this?

I am still pretty sure, say 95%, (do not recall perfectly - to many things on my mind... hihi) that the settings in Quicktime in the Preferences DID work before.
QT Player "Preference" settings only control how the content is displayed in the "Full Screen" mode -- not how it is activated. Pop-up options include:
1) Half Size,
2) Actual Size,
3) Double Size,
4) Fit to Screen,
5) Fill Screen,
6) Panoramic, or
7) Current Size
The options are available individually for "widescreen", "standard", or "other" aspect movie formats. The only other method of I can think of using the QT Player to automatically open in the the "Full Screen" presentation mode would be using a QTL file linked to your original source file but it setting the "Full Screen" option is "boring" for you, then creating QTL files would be even more so.

IPhoto 8.1.2 how can you set a password on an event or album?

I am downloading pictures from my iphone 4 to my iphoto on my mac and I wanted to set a password on a certain group of pictures and was wondering how to do that for the iPhoto 8.1.2 version.

You can't. It's not a feature of iPhoto.
For photos you want to hide from Mommy, put them in a Library stored on an encrypted disk image.
Regards
TD

Can you set up a smart group to send to all email addresses for each card?

So several of my contacts have more than one email address. I'd like to set up smart groups that send to all of the email addresses for each contact. Is there any way to do this? I've seen some topics that mention applescripts, but that required a bunch of prompts. I want to have smart groups that automatically include every email address. Any thoughts?
Thanks!
Dan

A distribution list in Address book will only allow you to choose one email address per contact. There is no way to change that.
As you discovered, you can write an applescript that will send to all addresses in the contact. I'm not sure where you got the idea that it needed lots of prompts. There might have been prompts in the ones you saw because the user wanted to choose.

How can I set up an email user as "send-only" (no mailbox for receiving)?

Can anyone tell me how I can set up an email account that can send emails but not receive emails.
Our Web application has been using a generic email address "[email protected]" in all of our PHP Web applications as the sending email account. I have this user set up in WORKGROUP ADMIN as a proper account. However the account gets tons of SPAM emails and is constantly filling up.
Also, all of the email accounts require SMTP authentication to send emails.
Is there any way to identify an account as a send only account so we can generate emails from our Web applications that cannot be replied to?
Thanks for the help
-- Jon

Doing so will cause issues. If you send out mail which to an outside server appears to be non existent, mail may be rejected and you may even be blacklisted.
You can remove the account from WGM and add a role account as an alias send to /dev/null. This will look to the outside world like an existing address, but simply be discarded on your system. You should however include a working address in your mailings for people to be able to respond.
Assuming you use local domains, edit /etc/postfix/aliases and add:
noreply: /dev/null
(you can change noreply with the sender used in your PHP apps, but I'd probably change the PHP apps to use noreply as this signals to people receiving your mails that this address is unattended).
When done, issue:
sudo postalias /etc/postfix/aliases
sudo newaliases
sudo postfix reload
HTH,
Alex

How can I set up another email client to send mail as my dotmac account?

My business uses an online application that can send emails to our customers as long as we provide it with an email account. I used the following from my mail.app:
SMTP HOST: smtp.mac.com
SMTP PORT: 25
SMTP_AUTH: true
SMTP USER: cryogen (my dotmac account and email)
SMTP PSWD: ****** (my dotmac password)
But, I cannot seem to get this to work. I tried it with another account I have with COMCAST.NET and I was able to successfully send emails using that account.
Is there something special about a dotmac account that I am missing?
Thanks.
PowerMac G4 MDD Mac OS X (10.4.8)

The information you’ve provided now is what I was asking for. Unfortunately, it’s still insufficient. It’s critical to know here whether the SMTP server does actually accept or reject the request of the mail client to send the message. Any conventional mail client would allow you to know that. In Mail, for example, you know that the message has been sent because Mail puts it in the Sent mailbox (whether the message arrives at the destination is an entirely different issue). And if the SMTP server rejects the message for some reason, Mail will report what the reason is.
Whether I’ve actually set up a different mail client to send with a .Mac account is irrelevant -- I don’t even have a .Mac account, for that matter, nor do I need one. Gee, if I needed to have the same accounts as the people I help, I couldn’t be here. Fortunately, I just need to know how email works and what the idiosyncrasies of some email services are, if any.
Try setting up your .Mac account using a conventional alternative mail client, such as Thunderbird, and you’ll see that you can do that with no problems -- or, if you have problems, it should be pretty clear what they are exactly and how to fix them.

How can I set up an HTML form to send iCal invites from a chosen date?

I am working on a site that has a form for booking appointments, and I have used a popup calendar and time for users to select. However, this needs to be sent to the recipient as an iCal event via email so they can just click Accept and it goes into their calendar. Is this possible, and if so how would I go about doing it? Any advice or help much appreciated!
Thank you
Michael

Man this is some heavy work; I would suggest moving this on to the "Server" section of support as they have more business workarounds.

Can GG set JMS headers or properties when sending message to activeMQ?

Hi,
When GG generates JMS and send it to ActiveMQ, I need some metadata coming up with the message. I think JMS customised properties or headers would be the good place to set. But how does GG achieve this?
Thanks in advance.
Damien

java.class.path=dirprm:dirlib/my.jar;ggjava/ggjava.jar ... Note (typo): as classpath separator, use ";" on windows , ":" on unix/Linux. Or use the property gg.classpath for supplemental jars, which is actually parsed before setting the classpath, and you can use commas to separate jars & directories in a platform independent manner . The "-D" jvm "boot options" are passed straight through to the jvm when it is launched.
# additional jars
gg.classpath=dirlib/my.jar,dirlib/activemq-all.jar
# jvm options (windows)
javawriter.bootoptions=-Djava.class.path=dirprm;ggjava/ggjava.jar ... -D...Edited by: MikeN on Sep 15, 2012 10:14 AM

How can I set my default email address when sending new messages

I have 2 accounts in my Mail Preferences, hotmail and gmail. I have tried to set it so when I send a message to a new recipient it is my gmail one that is used as default. However, it is thehotmail account that is always ticked first.
I would like to set my mail preferences so the gmail is my default first choice in sending new messages and is ticked as my default email address.
thanks for reading
gus

gus,
Have you gone to Mail>Preferences...>Composing>Addressing:> and selected "Send new messages from:" your preferred account?

HT4863 What can I do if I have "exceeded the sending limit" but I personally haven't sent more than 3 emails. How do I fix it?

How do you fix email message sending limit when the email account has been spoofed?

Spoofed or hacked? It's easy for someone to forge your address as the 'From' address, but that wouldn't involve using the iCloud server and your account and would have no effect on your limit.
If you have actually been hacked, so that someone has been sending using your account, then you need to change your password immediately to something really strong and unguessable. If they have taken you over your limit you will have to wait 24 hours after which you should be able to send again.

Can I set up to have every event send notice

Similar Messages

Maybe you are looking for