Can I set wifi priority on an ARRIS Model TG862G/CT modem
The wii has a higher priority than my work wifi connection. Can I change this?
The wii has a higher priority than my work wifi connection. Can I change this?
Similar Messages
-
The default priority setting in Mail is set to "normal" and is causing emails I send to be sent with red priority flag.
I have found the flags to reduce the priorty level manually to "low Priorty", but how can I set default priority to low = no flag?
Thank you for advising,Try deleting the .plist.
Quit the application.
In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.mail.plist. Move the .plist to your desktop.
Open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer ones.
If you want to make your user library permanently visible, run the below command in Applications/Terminal.
chflags nohidden ~/Library/
You will need to do that after any updates. -
Comcast has been hounding me to upgrade to their newer modem in order to obtain maximum bandwidth with changes they've made. They sent me an ARRIS Wi-Fi modem (model TG862G/CT). I was not expecting the modem to have wireless and would prefer using my Airport Extreme (model A1143). I have not attempted to connect the new ARRIS yet. Should I send the ARRIS back or is there an easy way to make use of it while keeping my Airport Extreme fully functional?
Thanks, I will look up "bridge mode" after I log off here. In the mean time, what if I were to simply buy the newest AE—will I still be able to use "bridge mode"? I imagine Comcast would prefer that I use their equipment and will eventually leave me no choice, but until that happens I would prefer to use Apple's AE. What is your expert take on this?
Any AE will be able to do bridge. There is actually very little difference between your ancient AE and the latest AE in terms of functionality.. Apple is minimalist.. so change can be avoided.. no need to add functions that were always missing.
I was thinking the printers are USB?? Is that incorrect.. are they wireless or ethernet? Any native network printer can be simply connected to any router.. it will perhaps be slightly easier in an Apple environment to use them on an apple router but the difference should not be huge..
USB on the other hand is tricky.. you will need to use some router that allows print serving from USB.. that still works fine whether the AE is bridged or in router mode.
Netflix is no problem either.. (assuming you are not trying to bust a geo-block).. the actual netflix login is stored in the TV.. the only security info on the AE is the wireless connection and that can be swapped to any wireless router. No biggie.. geoblocking is a biggie.. tell me if that is the case.
It is really up to you.
1. Do nothing.. let Comcast squark all they like.. they are still providing you a service you can use. They are not going to cut you off if you still keep paying the bills.
2. Change the modem for the new one they sent.. this involves a lot of network modification .. but in view of the age of the current devices.. will have to happen in the near future regardless.
3. Return the modem router and request a pure modem.. to give you as little network impact as possible. You will simply change old modem for new one. However at some point the Gen1 or 2 AE will die.. and the rest of the network will need updating.. you are putting off d-day. Modern wireless routers have come a long way since Gen1 or 2 AE.
Take your pick.. Bob says 3. I say 2 or 3. It makes little difference as at some point the network needs a refresh. -
IOS initial setup: can't set wifi properties eg proxy
Problem: The wizard that starts for setting up a new IOS device lets you select a wifi point to connect to, for which you'll be prompted to enter a password but it's missing the usual ">" menu where you can enter further settings such as a proxy.
If proxy settings are mandatory the device cannot connect to the internet to progress through the wizard.Div is ver dodgy (doesn't give any line break at all in some email clients)
Show me an example of code that doesn't give a line break with <div>. Sorry, I just don't believe this.
Span is even worse
But who would use that anyhow?
Float is an absolute disaster.
That's not my experience.
What do you use to attach the inline styles to?
<p> tags or <div> tags work OK for me.
We still get templates from our clients (who are big corporations) that are all table-based.
Then you don't have much choice. Just make sure that the code is valid before using them.
I tried it in design view but it just inserts the table - I'm not getting the dialog box where you can set the properties.
You should be - I don't recall what it is you have to do to retrieve this. Have you tried uninstalling and reinstalling? -
Can I set a priority in SCCM 2012 for advertisements or any other ideas to fix my Task sequences?
I have several task sequences that I deploy to lab computers that we re-image 1 or 2 times a year. The task sequences run and install specific software
for that lab after the base image deploys.
The base image is deployed using WDS without SCCM in the mix. It is a setup they we are using because of legacy business processes that just make this easier.
Then after the machine boots up and gets its SCCM policies the task sequences start running to deploy the software.
The issue I am noticing is that I have no control over what runs first and sometimes Windows Updates that are deployed via SCCM run before or in between the task
sequences that I have running. Some installs fail because of the pending Windows Update reboot, which I believe I have gotten around just by checking for it and rebooting before it installs the software. The issue is that the Windows update could
and usually is one of those lovely updates that requires multiple reboots. The second reboot is killing my task sequence.
The issue is I need to somehow force this updates to run after my task sequences or make sure they run first. The only way I can think of this is by having
priorities for the task sequences. I can't just add installing the updates to the task sequence, because the second reboot will kill my whole task sequence there too.
Anyone have any ideas on how to get around this issue? I want the machines to install the Windows updates so I can't just remove them from the collection.That's definitely the best option to do everything via the task sequence deployment.
Also, there are script available in the community to add or remove a device from a collection, see for example:
http://sccmfaq.wordpress.com/2013/05/20/sccm-2012-sp1-remove-client-from-collection-after-osd/
Keep in mind that if you want to use a script like that during the task sequence that the device running the task sequence (and by that the script) requires specific rights within ConfigMgr.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Can't set Shade GOURAUD on imported Obj models
Hi,
I'm importing an obj model, but I can't get the shading model to be Gouraud. It's always flat.
Here is a short code snippet where I try to make the model use Gouraud shading:
ObjectFile objectFile = new ObjectFile();
Scene scene = null;
try {
scene = objectFile.load(filepath);
(...) // catch block
Hashtable allReferences = scene.getNamedObjects();
Enumeration enumeration = allReferences.keys();
while (enumeration.hasMoreElements()) {
String key = (String) enumeration.nextElement();
Appearance appearance = new Appearance();
ColoringAttributes coloringAttributes = new ColoringAttributes();
coloringAttributes.setShadeModel(ColoringAttributes.SHADE_GOURAUD);
appearance.setColoringAttributes(coloringAttributes);
Material material = new Material();
material.setDiffuseColor(1f, 1f, 1f);
appearance.setMaterial(material);
if (allReferences.get(key) instanceof Shape3D) {
Shape3D ref = (Shape3D) allReferences.get(key);
ref.setCapability(Shape3D.ALLOW_APPEARANCE_OVERRIDE_WRITE);
ref.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE);
ref.setCapability(Shape3D.ALLOW_APPEARANCE_READ);
ref.setCapability(Shape3D.ALLOW_APPEARANCE_OVERRIDE_READ);
ref.setAppearance(appearance);
Thanks in advanceI think this is the culprit:
3) check the key of the imported file with a software instrument, and switch the project's key accordingly
If the "follow tempo & pitch" box is checked, this might change the sample's pitch and throw GB off.
Try to determine the sample's key before you import it, set the GB project's key accordingly, and then import the sample. That should assign it the correct key! -
How can I set priority on an individual email in my inbox?
I have the Priority column open in Thunderbird, but I can't set the priority. How can I do this?
'Tools' > 'Message filters'
* click on 'New'
* give filter a name
Apply filter filter when:
* select: 'Manually Run'
* Select: 'Getting new mail'
if you want to check for and remove junk first.
* select: 'filter after junk classification',
If there is only one condition or if you want to use more conditions that say 'A' AND 'B' must occur.
* select 'Match all of the following'
If there is more than one condition or if you want to use two more conditions that say 'A' OR 'B' must occur.
* select 'Match any of the following'
you will need to work out what condition(s) need to be met, such as:
example:
'FROM' and 'IS' and 'email address'
to set another condition click on the small +
Perform this action:
'Set Priority to' and 'Highest'
* click on OK to save the filter.
* make sure it is enabled.
Message filters run in the order listed. So you need to make sure that you do not have another filter positioned above that filter which could filter emails before the second filter can work. -
My wife and I share the iPad. Can we set up separate accounts to log in (like on our Mac)?
My wife and I share the iPad. Can we set up separate accounts to log in (like on our Mac)?
Good question, but I'm 99.9% certain the answer is "no". Here are some considerations:
Think of the heritage of iOS. It really started with iPhones and maybe iPods. These devices cost a whole lot less than a Mac. They are generally not thought of as shared (with exceptions, of course, as is true for you).
Think of the backup process. i-devices typically sync with one iTunes on one computer. How would an i-device with multiple users enstantiate this?
Anyway, all this is to say I'm convinced you cannot do what you're inquiring about. -
2 New Ipads (Retina and Mini)(New to Apple) How do I share purchased apps, but others have each act independently? Mini is for the Wife the Ipad4? is for me. I want to use mine at work, etc. She's home with the kids. Can we set them up seperate, but share
--break--
So we are entirely new to Apple products. I'm an IT guy, but have always been a windows user.
So the Ipad with Retina Display is to be mine (and will use it at work for notes, organization, etc)
The MINI is for the wife.
But, are we allowed and can we.. buy an app and share that app between both devices? IE. Can I buy a copy of Angry Birds for the House and both Ipad's use that single purchase? and if so, can we still run the Ipads seperate other than to share the apps purchased. IE my facebook and email set up on mine and hers on her ipad mini?
When I finally find a note taking app I like, can I share it on her ipad, without her having all my work files, etc?
Thanks for helping out the apple noob. Hoping for a great experience, and anticipate droping $100 in apps the first day.. just don't want to do that twice. If this is against the usage policy, thats unfortunate but good to know. (I mean we can share stuff on PC as long as its in the same household)
thanks again (explanations or links are fine)There are a number of Apple services: iMessage, FaceTime, iCloud, Game center, Find My iPad, etc.
Now, to share apps, music and books you need to have the same Apple ID:
iPad's Settings > iTunes & App Stores > Apple ID > Your purchasing Apple ID.
For the other service, your wife should have her own Apple ID.
All she needs is a valid e-mail address, apply Apple ID below:
https://appleid.apple.com
Here's a limk with useful tips: Note: It's also valid in IOS 6
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family -
My wife and I have been using the same iTunes account for both our iPhones, but she wants separate apps from mine. How can I set up a second account in her name, delete the apps on her phone and start from scratch with just the apps she wants on her phone?
If you have the old phone, connect it to iTunes, right click on the device, and choose transfer purchases. If you no longer have the old phone, I don't believe there is a way to recover them, as they were on your original device.
-
How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly
I want to extend my wifi off my Time Capsule with an Airport Experess in a part of my house that has no data cable ran to it. How do I do this?
ThanksNo more meseges.
في ٢٦/٠٨/٢٠١٤، الساعة ٢١:٤٥، كتب Apple Support Communities Updates <[email protected]>:
New discussion activity
Bob Timmons has posted in the AirPort community.
How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly
Assuming that you have the model A1264 or A1392 version of the Express, it must be located where it can receive a strong wireless signal from the Time Capsule to be able to extend it correctly.
A good general location would be a point that is about half way between the Time Capsule and other area that needs more wireless coverage.
You will use AirPort Utility on your computer to configure the Express. An iPhone or iPad could be used as well.
We can provide more help....if you need it....but we'll need to know what version of AirPort Utility that you are using on your computer....or whether you want to use an iPhone or iPad to setup the Express.
https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-26506753-46613 2/AboutAirPortUtility.png
To post a reply, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support -
My wife decided to set up her iPhone on my account and now everything is comingled. I want to set up an iTunes account for just me. Do I have to set that up on a computer or can I set it up on the iPhone?
iTunes will need to be set up on your computer however you can set up a new Apple ID to use for your iPhone. Really all you need to do is Assign a new Apple ID to your iCloud account.
Follow the link to create a new Apple ID: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
After you do that, on the device you want to assign a new iCloud account go: Settings > iCloud > Delete Account and then sign in with the new Apple ID.
NOTE: This does not effect iTunes, all of your devices can continue to use one shared iTunes account under your original Apple ID for downloading apps and backups. This simply gives iCloud a place to sync the individual devices information and will stop iCloud form merging all the information, such as contacts, with all of your devices. -
My wife and i share the same itunes account but we have separate libaries , can i set her up her own itunes log in to free up my icloud memory.
Hi tomgoggs,
iTunes purchases do not count against your iCloud memory space. See this article for what iCloud is used to store -
iCloud: iCloud storage plan overview
If you are having an issue with iCloud memory being full, you may want to use the steps in this article to help -
Manage your iCloud storage
Thanks for using Apple Support Communities.
Best,
Brett L -
If my wife and I share our Imac but have separate Iphones and Ipads, can we set up 2 separate Iclouds on the Imac? Or do we have 1 Icloud account and synch our individual devices separately?
Set 2 independent users on the iMac, each can then have their own accounts (iCloud, iTunes etc)
-
Can I set the Ipad 2 to default to wifi?
Can I set the Ipad 2 to default to wifi?
It is set that way by default, if it finds a trusted WiFi site it will connect with it.
If it goes to sleep the WiFi connection will be cut. If 3G is on and a push notification or email is received it will be via 3G.
Maybe you are looking for
-
CS4 won't recognize DV camera for capture
I installed CS4 Master Collection and all works well except for Premiere. It won't capture. The error is " Can't activate controller. Try re-setting Camera" Windows New Found Hardware recognizes it and says it's ready to use. I click "No Action" or "
-
On render nodes I'm unable to download AE CC 13.1, all I get is 13.0
I updated AE on my workstations in the CC desktop app without a problem. The render nodes are not getting the update for AE in their CC desktop app. They definitely have AE CC 13.0 on them, and I can't figure out why the update doesn't just show in t
-
Is there any way to clean/enhance an audio track? I have imported my 40 min movie from a mini DV tape. It is a school play shot in a hall and the sound is less than brilliant. Is there some filter I can run it through? Thanks.
-
How do I get 3 Dell (1 desktop and 2 laptop) to work wireless with my WRT54G2?
Hi. All the tutorials I've looked at have the computers hard-wired to the ethernet ports on the router. Can I not access the router from the 3 computers wireless? I'm a newbie at this & need a step-by-step guide to having all 3 computers access the i
-
when i watch videos on my iphone 5 my wifi buffers the video and then halfway through it just stops and all wifi stops working on my device. i need to switch back off and on the wifi then it works but the same thing happens every time for videos. NOT