Can I shoot tethered into Lightrrom 4.2 with my Nikon D3X?

Can I shoot tethered into Lightroom 4.2 with my Nikon D3X?

http://helpx.adobe.com/lightroom/kb/tethered-camera-support-lightroom-4.html

Similar Messages

  • Shooting Tethered into Lightroom

    I plan on starting to shoot tethered at Professional Boxing and MMA events...
    I will tether my Nikon D3 to a Windows 7 laptop containing Lightroom 4.1 .....I normally choose (my editor picks which matches they need) approxmetely  6 files per match, rather then export those full rez jpegs to a folder on my desktop and then move to Ip-switch to forward to my publishers FTP site .   Is it possible to select 6 files (full rez) then forward to a FTP site without leavling Lightroom , I have to speed up the entire process getting files to the FTP site as there's normally only a few mintines betweeen matches.
    Thank you .............Tomba-Images

    There is a free FTP upload plugin included in the Lr SDK that will aloow you to export to FTP directly from within Lr to the FTP server address of your choice ... The current SDK kit can be found here:
    http://www.adobe.com/devnet/photoshoplightroom.html
    I have been using the FTP plugin since Lr v2 without incident and I routinely upload single images or collections of several thousand to both client servers and my online shopping cart ... works very well and I don't have to deal with a mountain of derivative files and use an FTP client to complete the transfer ...

  • Can i shoot tethered with two cameras?

    I've read that I can shoot tethered with two cameras in Adobe Photoshop Lightroom. When I tether them to my iMac 27", one will work. Then I switch cameras in the "shooting module" to the other body (both bodies are Nikon D800) and then it freezes up. Do they need to be named differently? Is that even possible. Your help is greatly appreciated.

    Canon supports two camera attachment for tethering.
    Nikon does not.
    Tethered camera support in Lightroom
    Notes on Nikon cameras
    For all Nikon cameras:
    If you trigger the shutter with the tether bar capture button, the image must finish downloading before another photo can be captured. Triggering a capture with the shutter release button on the camera does not have this limitation.
    Images do not save to the compact flash card. They are only downloaded to the computer.
    Only one Nikon camera can be attached at a time.

  • How can I share (e-mail) NEF files shot with a Nikon d5100 in Lightroom 4.4?

    I am new to shooting RAW NEF and then sharing them in Adobe Photoshop Lightroom 4.4. How do you share (e-mail) NEF files shot with a Nikon
    D5100 that have been downloaded into Adobe Photoshop Lightroom 4.4.? Isn't there someway to convert to JPEG for sharing. I have 50th wedding
    anniversary photos taken and want to share with family and can't. Thank You for any assistance on this problem.

    If you use the inbuilt email option your NEFs would be automatically converted to Jpeg, in accordance with the settings you choose bottom left of the email dialog box (or you can setup your own specific settings).
    Alternatively you could export to Jpeg, then attach the exported files to an email outside Lightroom.
    Or you could upload them to a web hosting site such as Flickr or Picasa, or maybe use Dropbox or similar.
    Bottom line is there are lots of ways of sharing your pictures with your family.

  • Can I shoot tethered with my D3x to Lightroom 3.6 on my Macbook Pro OS 10.7?

    I'm getting conflicting information on whether or not I can shoot my D3x camera tethered to my laptop with the new Lion operating system directly into Lightroom.  Any suggestions?

    This link will take you to the official list of cameras where Lr suports tethering http://helpx.adobe.com/lightroom/kb/tethered-camera-support-lightroom-4.html

  • I can't paste text into info boxes anymore with the latest version of itunes

    Ever since I downloaded the latest version of itunes (on Windows 7), I can no longer paste text into the info boxes when I edit song information. I can’t paste by right-clicking or Ctrl+V, this is driving me crazy because I’m trying to add info on a Russian artist with Cyrillic letters and I can’t do it! I didn’t buy the song from itunes so it can’t be issues with Copyrighting although the same thing happens with songs from the store and every other song in my library. I can paste text into the lyrics section but that’s it. I restarted my computer after reinstalling the latest versions of itunes and Firefox today hoping it would fix my problem but it didn’t. Is this happening to anyone else? I hope someone can help me! Oh and it isn’t just with Russian, I tried to paste English info just to see if it was a problem with recognizing Cyrillic and still nothing pastes, the boxes just stay blank.
    Itunes is annoying me more than ever. With the constant updates you’d think they would be able to improve all bugs but once one problem is fixed another occurs and it’s so irritating because I couldn’t care less about how my library looks as long as everything is organized in a simple way and I can sync my ipod without spending forever on itunes re-editing stuff and readjusting to updated layout changes. Apple’s attempts at making things look “cool” isn’t worth the F-ing constant problems which matter more! Okay, rant over

    M_E_G wrote:
    With the latest version of iTunes, my library screen has changed completely and I no longer have a Summary tab to select manual syncing of my iPod when I plug it into my computer.
    That would be Manually manage, not Manually syncing.
    Click the drop down arrow at top left the Show menu.
    Then iTunes menu View > Show sidebar.
    Select the iPod then you can select the Summary tab.

  • Why can't I sign into FaceTime or iMessage with my apple I'd after os 6 update

    I upgraded to os 6 and can't sign into FaceTime or iMessage since. Error message pops up saying incorrect username or password even though I use the same user name on iTunes. I tried creating a new apple I'd n that didn't work either.

    Hello,
    Might ask here...
    https://expresslane.apple.com/

  • Why can't I sign into my Game Center with my new password

    I Just changed my password now it won't let me into my Game Center?????

    Hi Aggrevated77,
    Welcome to the Support Communities!  I understand you just changed your password for your Apple ID and now you can't log into Game Center.  The first thing to do is to confirm your new password is working in other services that use your Apple ID.  Are you able to log in at www.icloud.com or in the iTunes Store?
    The article below will provide additional steps to try:
    FaceTime, Game Center, Messages: Troubleshooting sign in issues - Apple Support
    I hope this information helps ....
    - Judy

  • Can anyone split frame into three independent areas with JSplitPane??

    Hi,
    has anyone tried to use JSplitPane to split JFrame in to 3 different areas? How should it be done correctly?
    What I have now is two nested JSplitpanes, i.e. I have 'baseSplitPane', which divides frame in two sections, and then I have 'upperSplitPane' as a top component of the baseSplitPane. Then I have three JPanels with JTables inside them; I need to show three JTables (lets call the upper, middle and lower;=) in one JFrame, and I should be able to resize them some some clever way.
    The problem is:
    When I move splitter of the baseSplitPane towards the top of the screen, first the middle table is shrinken. After that upper table starts to shrink, until splitter is in the top of the screen. When I start to move the splitter back to the bottom, the upper table still remains "minimized", and only the middle table is enlarged. No good!
    What I would need is a splitpane for three components, which splitters don�t affect each other. So that when moving a splitter, it just changes the size ratio of the two componts around it, and if you move it to the other splitter it stops. There�s no such component in SWING, is there??
    All hints are appreciated, thank you!
    /Jari

    That�s not exactly what I needed, but anyway that is much better than it used to be! So thank you for it, but still; moving one splitter effects to another splitter also.
    If no one tells me a better way to handle this, maybe I can live with it...
    Any other good hints, GraemeHook?
    /Jari

  • DAQCard 6062E Can it be installed into a desktop PC with an adapter?

    Is there an adapter that goes from PCMCIA to the PCI bus or USB that would make it possible to use the DAQCard 6062E on a desktop PC running Windows XP. The laptop I was using is now dead.

    The PCMCIA to USB device was found here... http://www.amtron.com/adapter/upisdma.htm
    As you mentioned, the PCMCIA cards with USB jacks are popular for laptops. It's been a challenge to find the "opposite". It looks however like this can be used in a "PC mode".
    I currently have an E series PCI card, which I'd like to replace with something smaller and/or external. Data acquisiton will still be through a PC using LabView.
    The USB devices would seem to be a good alternative, however, upon browsing the boards here, it looks like some have had some troubles using DAQmx Base.
    I was looking at the PCMCIA as an alternative, as I've used them in labtop acquisition settings before. The challenge here has been implementing this in a PC environment. The PCMCIA slots via PCI defeat my initial purpose, which is why I thought about trying to find a PCMCIA/USB adapter. However, if I'm going to do that...why not just go with a USB device? The only 'pro' for the PCMCIA cards right now is simply my previous familiarity with them.
    Options options options!
    Perhaps you can squelch my concerns about DAQmx Base? My experience has been mostly with Traditional DAQ, with a bit of DAQmx.

  • Why can't I sign into my Apple ID with out having to put in my credit card

    It says everything is alright with it on Safire and then I go to my App Store try to log in and says that this Apple ID has not been signed into iTunes Store and then when u press reveiw it says you have to give all this information on you credit card which I don't wanna give

    If you don't want to use a credit card with the App Store and iTunes, there is a very specific way in which you have to create the Apple ID. If you don't follow the steps exactly, you are forced to put in credit card details in order to use that ID. The other option is abandon that ID and create a new ID.
    Frankly, I hate the way that Apple handles creating an ID without giving users the option up front - in clear and uncertain terms - to create an ID without using a credit card. You have to search for the information in order to find it.
    If you create a new ID, you will also need another email address to use now. Something else that makes this an even bigger PITA. This explains how to create the ID without a credit card.
    Create iTunes Store account without credit card - Apple ...

  • Locked out with file vault. Did fix by setting up new user account but cannot access old account with files                           but I can't get back into my old account with all my doc's and pics

    I was locked out by File Vault. I set up a new account by fooling the notebook it was a new start up. Now I cannot access my old account with all of my files. I can see it in Accounts but it will not let me access. Help

    I managed to get a few Time Machine Back Ups  before I passed away
    I'm not sure whether a ghost can do this, but if you were still alive, you could do as follows.
    First make sure you have read & write access to the folder you're trying to restore to. You should be able to see its contents in the Finder, and to move files in and out of it.
    This is an exception to the rule that you should never make any changes to backup data. I've tested this procedure in OS X 10.8 only. It should work with later versions, but I don't know whether it works in earlier versions. Use it only for files that were backed up from your home folder, or a folder on another volume created by you, and would normally be writable by you. Do not touch backups of system or application files.
    In the Finder (not in the time-travel view), navigate to the backup volume, then to the folder named "Backups.backupdb", and then to the snapshot you want to restore from. The snapshots are folders labeled with the date when they were created. Inside each of those folders is a file hierarchy like the one on the volume that was backed up. Descend through the hierarchy until you come to a folder named "Users," and inside that, a folder with your user name. The procedure will be different if you're trying to restore files on another volume.
    Select the folder and open the Info dialog (command-I). Click the padlock icon in the lower right corner of the window and authenticate. In the Sharing & Permissions section, give your account Read & Write access. You may have to close the dialog and repeat this step in order for the change to show up. Then click the gear icon and select
              Apply to Enclosed Items
    from the popup menu.
    Try the restore operation again, in the time-travel interface.

  • Converting Images to B&W Automatically when Shooting Tethered

    I'm cool with setting up my camera to shoot tethered into Lightroom. No problem there. What I would like to know is if it is possible to automatically convert the JPEG files into grayscale upon transfer into Lightroom without having to press any further buttons to do so, ie. aoutomatically transfer images from camera to Lightroom in color, then convert to grayscale without any further action on my part. I know on "Import", this is no problem as a Preset can be used. But, there doesn't seem to be the ability to use a preset when shooting tethered that I am aware of.
    I know I can set the camera to shoot grayscale and that would be one way to solve the problem. Ideally, though, I would like the images to come into lightroom as color and then convert to maintain color options later.
    Thanks for your help!

    In the menu command File > Auto Import > Auto Import Settings, you can select a Develop preset. Just choose one that converts to black and white.
    Edit - but re-reading your question, no. You would have to export the files to get b&w jpegs. Maybe I did understand first time!

  • Shooting tethered tethered with LR 3 and a D300

      I just finished a photo shoot using a Nikon D300 and shooting tethered into LR3 and Windows 7.  Everything was working fine then my computer said the usb device is unrecognizable.  Until I reboot I cannot restore the connection. Can anyone advise me on this?

    I don't remember what the settings were when I imported the catalog. Whatever the defaults were.
    Whatever happened during import, I should still have the option to add the files when sync'ing a folder? But I don't.
    Neither LR2 nor LR3 will allow me access to the edited DNG files now. I've erased and am rebuilding the catalog (all pertinent info was written to sidecar and/or within the DNG file, so I'm not anticipating any problems with this. It's showing the expected 27,000+ files being imported). I think I'll try building the LR3 catalog the same way when I fire it back up, once I'm sure I'm back up and running in LR2.
    Thanks for the quick response! 
    - Arved

  • Camera battery drain when shooting tethered to LR3.x

    Hi:
    I've been experiencing very rapid battery drain in my Nikon D90 when shooting tethered into a laptop running LR3.x under Windows7 32-bit. Is this to be expected because of the constant transfer of images across the USB connection?
    Thanks in advance for any insight on this.
    Regards,
    Peter

    Even transfering via USB for downloading will cause the battery to drain. Tethering would certainly drain the battery more than shooting non tethered, but it shouldn't feel excessive.

Maybe you are looking for