Can i shoot tethered with two cameras?

I've read that I can shoot tethered with two cameras in Adobe Photoshop Lightroom. When I tether them to my iMac 27", one will work. Then I switch cameras in the "shooting module" to the other body (both bodies are Nikon D800) and then it freezes up. Do they need to be named differently? Is that even possible. Your help is greatly appreciated.

Canon supports two camera attachment for tethering.
Nikon does not.
Tethered camera support in Lightroom
Notes on Nikon cameras
For all Nikon cameras:
If you trigger the shutter with the tether bar capture button, the image must finish downloading before another photo can be captured. Triggering a capture with the shutter release button on the camera does not have this limitation.
Images do not save to the compact flash card. They are only downloaded to the computer.
Only one Nikon camera can be attached at a time.

Similar Messages

Can I shoot tethered with my D3x to Lightroom 3.6 on my Macbook Pro OS 10.7?

I'm getting conflicting information on whether or not I can shoot my D3x camera tethered to my laptop with the new Lion operating system directly into Lightroom. Any suggestions?

This link will take you to the official list of cameras where Lr suports tethering http://helpx.adobe.com/lightroom/kb/tethered-camera-support-lightroom-4.html

Can I shoot tethered into Lightrrom 4.2 with my Nikon D3X?

Can I shoot tethered into Lightroom 4.2 with my Nikon D3X?

http://helpx.adobe.com/lightroom/kb/tethered-camera-support-lightroom-4.html

On holidays we took pictures with two cameras and an iPad. I put everithing on my PC. Rearranged them by date, time and or subject putting a number in front of the picture name. I synchronised with my iPad and my pictures show in misselaneous order. Help

We took pictures during oue holidays with two cameras and an iPad. I put all the pictures on my PC and reorganized them by date, time and/or subject, By putting a number in front of the picture name. Then I synced with my iPad. All the pictures show in a misselaneous order. What went or did I wrong?

You did nothing wrong, but the photo app puts stuff in chronological order.
You can look for another app. Afraid I don't have one to suggest, but I do understand that other apps will sort photos differently.

Working with two cams

I have shots from two cams which I am preparing to capture into Adobe Premiere.
I know there's a way to work with two cams-monitoring, but is it the case when capturing ?
I am capturing via Firewire. My card has more than one slot - so guess I can plug-in two cams at same time. But can I A/B between the two cams prior to capture (record) into Adobe ?
Or is the multiple cam into Adobe only for ''already captured'' shots ?
Thanks,
Rob

You need to capture the data streams separately (not simultaneously)

I have a video made with two cameras, in two tracks. Sometimes only one camera is running (because t

I have a video made with two cameras, in two tracks. Sometimes only one camera is running (because they both turn off at certain clip lengths). I'm trying to cut them together using the multicamera window, but I get no audio from track 2. How can I get audio from track 2. (My kludge is to cut the original audio from track 2 and move it into track 1.)

Good Grief! Now that I know the answer, I can find it all over the place. But before, I got so many google references that just told me it couldn't be done! That made me think the answer must be obscure -- when it was really simple, and should have been obvious to me.
The lesson seems to be: do more work looking around the panels and menus of the program itself before trying to look in "help" or "google".
Thanks, again, Jerry, for your consideration.

How can i build table with two user name columne ?

How can I build view with two columns for user name ( one create and the other
Can change also )
And to display full name ( the user name is the key but not display ) ?

Hi,
Creating View
     From initial screen of data dictionary(T.Code: SE11), enter the name of object i.e. view.
     Select view radio button and click on the push button.
     Dialog box is displayed for types of views.
     Select the view type.
     On the next screen, you have to pass following parameters.
     Short text
     In the table box you need to enter the table names, which are to be related.
     In join table box you need to join the two tables.
     Click on the TABFIELD. System displays the dialog box for all the table fields and user can select the fields from this screen. These fields are displayed in the view fields box.
     Save and Activate: When the view is activated, view is automatically created in the underlying database system. As long as the table exists in the database, the view also exists (Unless you delete it).
Regards,
Bhaskar

How can i make trigger with basler camera GIGE 659x494 - 70 FPS and I/O terminal block

Hi all,
How can i make trigger with basler camera GIGE 659x494 - 70 FPS and I/O terminal block

Frank,
If you are wiring an isolated power output to the EVS you will need to apply a power supply to the terminal block. This is mentioned in the "wiring isolated power output" section of the EVS getting started guide located here. The guide references the EVS user manual which provides a pinout of the d-ub connector in table 2-11 of the manual located here. For more information on the camera settings you need to set on the Basler camera please see the user manual of the camera you refrenced here.
To provide power to the camera you can purchase a power cable for the camera. Rather than a power cable, since you want to also do triggering, you will want a Trigger and I/O Cable instead which is part number 779985-01 as seen on this product page. The I/O cable would allow you to wire the trigger lines to the terminal block as well as the power lines.
David A
National Instruments
FlexRIO Product Support Engineer

How can i use tethering with my iphone?

how can i use tethering with my iphone?

According to this document, T-Mobile in the Netherlands does not support Personal Hotspot, only Vodafone does, thus that setting will not appear for you.
http://support.apple.com/kb/HT1937

Unable to shoot tethered with a Canon 70D

I am trying to practice shooting tethered for an upcoming shoot. I am unable to get Lightroom and my Canon 70D to connect. I receive the dialog box shown below several seconds after attempting to connect. I went through all the steps on the "Troubleshooting tethered capture in Lightroom" and can shoot tethered using Canon's software. I am using Lightroom 5.3 on a MacBookPro 13 inch with 16 gb ram running system 10.9.1

Lightroom does not currently support tethering on the 70D.
See this document: http://helpx.adobe.com/lightroom/kb/tethered-camera-support-lightroom-4.html

How can I adjust video from two cameras that are out of sync?

Hi - I've just recorded someone speaking on two cameras with the intention of cutting clips in from the second camera while using the video and soundtrack from the main camera, however the two video files are out of sync by half a second or so by the end. How can I 'stretch' the shorter clip so they coincide properly? Thanks, David.

David
What version of Premiere Elements are you using and on what computer operating system is it running?
Typically, select the clip,
as you hold down the Alt key of the computer main keyboard, tap the left or right arrow key once. Each tap = 1 frame nudge.
as you hold down the Shift+Alt keys of the computer main keyboard, tap the left or right arrow key once. Each tap = 5 frames nudge.
If you are working with audio editing, consider Edit Menu/Project Settings/General with Audio Display Format = Milliseconds.
Please let us know if any of the above worked for you.
Thank you.
ATR

Acquire with two camera's to one image??

Here is my configuration:
Windows 2000
PII 866
512mb ram
1) Imaq PCI-1409
1) Imaq-A6822
2) JAI CV-M50 camera's
2) Pentex C60607 lens'
I would like to snap an image with both cameras and combine the two to make one image. The part will not be moving and time is not critical. The camera's will be mounted 3.8' above the part which will give me about a 3' square area for each camera. So basically I would like to end up with one image approx. 3' X 6'. How is the best way to go about doing this? Or is it even possible?

It all depends on how accurately you want the images to be joined.
If you just want to display them as a single image, it is very easy. IMAQ ImageToImage will paste one image into another.
If you want to seamlessly join them together, and do it accurately enough for measurements or feature detection, it is a lot more difficult. It is impossible to rotate and align the cameras so that two images can be pasted together accurately without manipulation of the images. You will need some mapping tools and figure out how to rotate and align the second image with the first. You will need a small portion of the images to overlap so they can be matched up. You may need to map both images to eliminate distortion first. If your part has a noticeable thickness
variations, you will get different perspectives for the two images.
Bruce
Bruce Ammons
Ammons Engineering

HT3819 Can you home share with two libraries on the same computer?

Can home share be used with two libraries on the same computer?

iTunes must be running for home sharing to work. There is no way to have home sharing running simultaniously for two users on the same computer.
Simply add the media files using File > Add File/Folder option in iTunes.

How can i control graph with two inputs?

Hi,
i would like to ask you about the graph with two inputs
Normally, if i just give one input, they generate the graph with this input(y) vs time(x).
But now i would like to get the graph with my two inputs in x axis and y axis .
i want to control both of two axis. How could i do for it ?
i attached the file that i try to use "Build XY graph" to control both x and y axis with random number .
It can run but i don't know how come the graph show nothing. .
Actually , it have to show something like wavefrom continuously. am i right?
Could you tell me a way to solve it ?
>>>
what i want to get is ..
in Graph,
for x axis , ditance (always increases)
for y axis , vibration (vary)
>>>
Thank you so much for your time . I am looking forward your kindly reply.
With Respect,
Su
Attachments:
using Build XY graph.vi ‏59 KB

Hi NI9233,
Mind me to interrupt, I am just helping Mike to explain what he meant to you, refer to the graph:
Picture 1:
Double click on Build XY Graph, uncheck the clear data on each call
Picture 2 and 3:
Change your formula node into +1 Basic Function in Functions Pallette.
Hope that helps!
PS: I am sorry for the size of the image, seems I made a mistakes when I saved the picture.
Sincerely,
Krisna Wisnu
Message Edited by Krisna Wisnu on 11-19-2008 08:19 PM
Sincerely,
Krisna Wisnu
Attachments:
Clear Graph on Each Call.PNG ‏46 KB
+1.PNG ‏30 KB
+1_2.PNG ‏21 KB

Can my iphone operate with two different phone numbers?

can I insert an additional sim card in my iphone so that it operates like a phone with two different selectable lines?
in other words I carry one phone with me but can receive or send phone calls, texts, emails etc from either of two different phone numbers?

No

Can i shoot tethered with two cameras?

Similar Messages

Maybe you are looking for