Can i show a 2 disc DVD as one movie

I am copying my DVD's to itunes library. i have a double disc DVD "Auschwitch - The Nazis & 'The Final Solution'" and it is saved under the same route file >>>Itunes Media>>Movies>>Auschwitch - The Nazis & 'The Final Solution' but one has the added 2 to differentiate it from the other. it shows up in my Itunes but as two separate movies. i have tried to copy the album title as I have in my music to group it but it just wont merge to one movie with two disc. Is it possible? I am using Itunes 11.2.1.1

I'll add one other comment, not related to the technical question you asked, but more on the creative side.
I've created a number of memorial slideshows both with and without video, and one of the most important things to keep in mind is that shorter is usually better. Depending on the venue in which it will be shown, I've found 10-20 minutes to be plenty of time to capture the essence of the person and hit the emotional impact the occasion calls for. After some point, longer takes away from the impact rather than adds to it. Two hours is a LONG time.
If the family insists I suppose you have little choice, but make sure they know there is a difference between a tribute and an unabridged autobiography.
Secondly, remind yourself this is NOT the time to show off your technical wizardry and special effects/transitions. Get out of the way and let the person being memorialized be the focus. Simple is way better here.
And kudos to you for taking on this project. It's a lot of work but will be treasured for years.

Similar Messages

Can I show a data label for only one point in a series?

Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
There are a number of graphs where I only want to value of either an extreme value or the ending value to show. Having all the labels in a series makes the chart too busy. This is pretty easy to do in Excel.
If this can't be done, I guess that adding a text box over those points would work.
Thanks

Hi W-T,
Welcome to Apple Discussions and the Numbers '09 forum.
wahoo_tiger wrote:
Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
Sure. Here's and example labeling only the MIN and MAX points.
Column B contains the data charted with the blue line.
Column C extracts the MIN and MAX values using the formula below. Those two values are charted as a separate series, using the green data point markers, and are labeled with their values. The intervening empty string values appear to have doused the lines connecting the two data points.
Formula: =IF(OR(B=MAX(B),B=MIN(B)),B,"")
Regards,
Barry

Can TV Shows be saved to DVD?

I inadvertently posted this on the Snow Leopard discussion forum, when I actually meant to post it in the iTunes forum.
This has most likely been asked before, but appropriate threads on this subject are difficult to find. SO... I'll ask:
If I have purchased TV shows from the iTunes Store, am I able to burn them to DVD for archival purposes? Not for watching on a regular TV, but just to have on disc as a backup. Is this possible?

Captain Maniac wrote:
If I have purchased TV shows from the iTunes Store, am I able to burn them to DVD for archival purposes? Not for watching on a regular TV, but just to have on disc as a backup. Is this possible?
Sure. You can burn them to a DVD just as you would any other data file.

How can I get another Installation Disc (DVD) for my CS5 Application

I lost one of my DVD installation discs from my CS5 set. I called Adobe and they said it was an older version and they don't have a link for me. Does anyone know how I can get ahold of the CS5 Application disc???

Welcome to the forum.
Adobe used to offer replacement discs for a minor charge.
However, that was usually for ONLY the current version - nothing available before. Once a version passed into history, the replacement discs were history too.
With the advent of Ps CC, I am not even sure if the Ps CS 6 replacement dics would be available now.
I would contact Adobe Customer Support (not Technical Support), and inquire.
Good luck,
Hunt

How can I show or hide a subform if one of multiple checkboxes is checked?

Hi,
I have 8 check boxes and would like to show a subform if any one of the check boxes is checked and hide this subform when the check box is unchecked. How can I do that?
The action builder didn't work very well.
Thanks
Sou

Hi,
Can we assume that all the checkboxes are in the same subform and they have the default values for on and off (that is 1 and 0).
If so try the following JavaScript in the calculate event of the subform containing the checkboxes;
var checkBoxes = this.resolveNodes('#field.[ui.oneOfChild.className=="checkButton" and $ == 1]');
Subform2.presence = (checkBoxes.length > 0) ? "visible" : "hidden";
The first line gets a list of all the child fields that are checkboxes and have a value of 1 (or on).
The next line sets the presence of the subform (which I am calling Subform2) to visible if there is one or more set to true)
Regards
Bruce

Two complete live shows on a single DVD+R double layer disc

Hello!
I am a new customer of Adobe's and have gone from Sonic MyDVD v6.1 to v9.0, then to Adobe Premiere Element 3.0 last month, and finally to Adobe Premiere Pro CS3 with Adobe Encore CS3 a few days ago with the digital downloads. Absolutely no problems downloading 3.5GB of files, which is unheard of for my computer and no problems whatsoever with serial numbers for the downloads either.
Fortunately for me, all of my problems have been stemming from being inexperienced with Premiere Pro and the online tutorials and help from Forum users have been fantastic! Well, with the exception of the "Desktop Display Mode has been reset because the video card returned an error" error message that seems to keep cropping up and causing my video to look unrendered, despite it all now being rendered, I am at a crossroads of what to do here.
Two years ago, I videotaped one of my favorite local bands performing an outdoor live show in the afternoon and then videotaped them performing at a club the same night. Now I am trying to re-make the same DVD that I made for them using Sonic MyDVD 6.1, because they want to sell it now, but this time on a double-layer disc for better quality (plus I upgraded my crap NEC DVD burner that came with my Dell computer to an LG GSA-H10L since then, which works great and doesn't make error-prone DVDs) and also remove some bonus materials that they thought would only be of interest to them and took up too much space. The only problem is that I deleted all of my original source files because they were taking up too much space and I couldn't save a 10MB file anywhere else. In hindsight, I probably could have split it up into smaller pieces, but that's not the issue now.
When I bought Adobe Premiere Elements 3.0, I remember reading something that said to put two complete video files on the same timeline and just add Main Menu markers and End Point markers to allow the program to auto-populate the chosen DVD template. So I did that, but I hated the templates and there was very little control over anything. Sonic MyDVD at least gave me the option to center the button text. In the end, I upgraded to Adobe Premiere Pro CS3.
Now I have completed editing the timeline and am happy with everything, but now I see there are no Main Menu markers or End Point markers. Can I still make a decent DVD with two main menu motion buttons that each have Play and Scene Selections options below them with everything on the same timeline/sequence, or do I need to create a new sequence and copy everything from part two of my original timeline to the new sequence? Is there a preferred method?
I didn't see this covered in any of the tutorials, help files, forums, or the downloadable manual that I also purchased. Maybe I missed it, but can anyone offer any insight on this?
Thank you!
Matt

Yes, I have Encore installed and did a 4-hour first pass to Export to Encore last night, but it failed about 2 hours in when my Zone Alarm pop-up came up saying it was trying to access the Internet and I was away from my computer for 15 minutes while it was up. Then I restarted it at 11pm and it ran until 3am, when I was hoping to go to bed, but then it began its second pass. Grr! I can't remember if I went to bed at this point and found this when I woke up, or if I was staying up watching its second pass to see if it would go any quicker than the first time, but when it completed, I received this pop-up message:
"The instruction at 0x11ce445a referenced memory at 0x11d00000. The memory could not be written."
When I clicked OK, Adobe Encore shut down.
I'm guessing that if I started with two .AVI files totaling 19.4GB, I should have ended up with something larger than a 3.8GB .M2V file, an 82MB .M2V.XMPSES file, a 936MB .WAV file, and a 3KB .XMP file when this was done rendering. At this point, I don't know what to do with the resulting files or if they are incomplete.
Anyhow, after all that, my main question in my original post was this:
"Can I still make a decent DVD with two main menu motion buttons that each have Play and Scene Selections options below them with everything on the same timeline/sequence, or do I need to create a new sequence and copy everything from part two of my original timeline to the new sequence? Is there a preferred method?"
Thanks!
Matt

I have created several short (3-5 minute) movies using iMovie 10.0.6 and Yosemite. I want to create one movie that includes these short movies that I can then either burn to a DVD or show in iMovie's Theater. How can I do it?

I have created several short (3-5 minute) movies using iMovie 10.0.6 and Yosemite. I want to combine those short movies into one movie that I can loop and burn on a DVD or show in iMovie Theater. How can I do it? The movies are now shared to iTunes.

Another easy way to fix this.
What I've noticed is that upon upgrading your projects and events to work with iMovie 10, initially it will work... Until you quit iMovie and reopen it again. Any events with hashtags will show up without the star next to the iMovie event. SO, if you happen to read this, after upgrading to iMovie 10 from its predecessor, immediately change the event name to NOT include a hashtag/pound symbol.
Otherwise, if it's too late, you can either do the above or this...
Hold down option and click on iMovie. This will prompt you Locate, Create a New Library, Cancel this window, or Choose a different library. What you want to do is create a new library, call it whatever you want to, this will only be temporary. After the program opens, it should be a blank Library. Then go to File > Open Library > iMovie Library (your original library) and proceed to change the name of your events. Quit the program. Go into your Movies folder in Finder, delete the library you temporarily created, and your back in business.

I would like to burn dvds..does anyone know a good safe easy to use converter/burning download to allow me to change mp4 /avi files to dvd so i can burn them on a disc that will play in all or most dvd players...thank you

i would like to burn dvds..does anyone know a good safe easy to use converter/burning download to allow me to change mp4 /avi files to dvd so i can burn them on a disc that will play in all or most dvd players..also is it possible to upload store boughten dvds/bluerays to my macbook..if so does anyone know how one would do that ? im just getting used to this mac and i do love it but alas i am comp stupid hahaha...thank you

Toast Titanium by Roxio.

Im making a photo slide show using imovie. how will i make a dvd copy that can play in both pc and dvd player. i dont have an idvd anymore. m using a mbp early 2011 osx 10.8.5

im making a photo slide show using imovie. how will i make a dvd copy that can play in both pc and dvd player. i dont have an idvd anymore. m using a mbp early 2011 osx 10.8.5.
after making the photo slide show, i clicked share>export movie. after which i burned using toast. the file became a .mov. i tried playing it in my mac and it worked. my fear now is will it also play in a regular dvd?... i read from google that mov files won't run in dvd players. what format should i convert it to so it'll play in a dvd player. can you suggest a faster way i can burn my projects for it takes me almost an hour to export. im going to make 28 slideshows for my kids in school. *=( if i need to do this process 28 times, i may not be able to finish it on time. please suggest a software or an alternative as to how i should do this... m more comfortable using imovie than iphoto. thanks and i hope to hear from someone soon *=j

Thank you QuickTimeKirk...used toast to burn project... my project was in .mov, i tried to play it a dvd player, it did play... will try again tomorrow using another dvd player just to be sure it'll will really work with dvd players. thank you again for your reply *=)

DVD Player can't show controller

Hey
I'm not really sure why, but starting about a month or two ago, i can no longer show the controller in DVD player. I hve the most current version (5.0.1) and do all of my regular updates. Even when i click to toggle show/hide controller in Window, it still doesn't work. i haven't been able to find anything about this anywhere. does anyone have any ideas, or has this ever happened to someone else?
Thanks

Just discovered this problem myself, version 5.0.1, running on Leopard fully updated. When using the fullscreen view no controller shows when I move the cursor to the bottom of the screen, as it should.

I created a slide show in photoshop elements 10, can i burn it to a dvd or send it to a friend?

i created a slide show in photoshop elements 10, can i burn it to a dvd or send it to a friend?

Share -> Send to iDVD. Only iDVD or similar can create a DVD.
Regards
TD

Can I burn a slide show on to a DVD RW ?

Can I burn a slide show on to a DVD RW

Thanks but I keep getting" insert blank disk"when I thought I had burnt the slide show. What's happening?

Can I export (burn) more than one slide show to the same DVD

Can I export (burn) more than one slide show I created in iPhoto to the same DVD, and if yes, how?

Yes. If you're using iDVD export the slideshow out of iPhoto at 480p size and drag it into an open iDVD menu window, being careful to avoid any drop zones. iDVD can handle up to 120 minutes of playing time (movies plus menus) on a single layer DVD disk.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Premiere elements 7 can it edit t.v. shows recorded on a DVD?

Premiere elements 7 can it edit t.v. shows recorded on a DVD?
WOw the guy at the store said this was easy to use but I'm not having much luck. Wanted to edited a t.v. recorded on a dvd. Transferred it to hard drive but the sound is way behind the video part. Any ideas? Thanks

teajay74
If you have tried repeatably and unsuccessfully to rip the VOBs from the DVD-VIDEO on a DVD-R or +RW using the Premiere Elements 7 (Get Media/"DVD (Camcorder or PC DVD Drive), I would strongly suggest that you use MPEG Streamclip to convert to DV AVI. Then bring the DV AVI version into Premiere Elements 7 via Get Media/Files & Folders from the save hard drive location of the DV AVI version.
MPEG Streamclip should take care of quality as well as any audio out of sync issues.
http://www.squared5.com/
You have two set up choices
Free...MPEG Streamclip + QuickTime Alternative (which contains the required MPEG-2 Playback Component), BUT you need to uninstall your regular QuickTime to get this to work.
OR
Partially Free...MPEG Streamclip + your regular QuickTime + purchase from Apple of the MPEG-2 Playback Component
http://www.apple.com/quicktime/mpeg2/
If you are going to being doing this type of a project on a regular basis, it might be worth the investment of going the partially free route.
Are you in a NTSC or PAL area? If you need a step by step for the MPEG Streamclip route, it will be supplied on request. I use it routinely. It is quick and effective.
ATR
(Add on...when ripping VOBs from DVD-VIDEO have you ever tried: (1) placing your DVD in the DVD burner drive tray (2) Premiere Elements 7 Get Media/"DVD (Camcorder or PC DVD Drive) (3) using the Media Downloader to bring your VOBs to the Premiere Elements 7 project? Or, are you doing something else?)

Can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion

can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion. when restart and i press command it still has recovery mountain lion show on my screen.

What model is the MBP? Did it come with OS 10.6 or a later OS? Is the install DVD one that came with it or something else?
You can't run an OS older than Mac on it.
But if came with 10.6 installed & you have the system discs, you should be able to erase the drive & reinstall the original OS.

Can i show a 2 disc DVD as one movie

Similar Messages

Maybe you are looking for