Can I "show" an image for a specific amount of time after a click?

Hello,
I would like an image to appear for only a specific amount of time after the user clicks a button.
Is this possible?
Thanks for any help!

You cannot time with an advanced or shared action. Isn't a rollover image (which you can time) a valid alternative? You could use the timeline in combination with an action Continue, but I don't know the precise circumstances of your question.

Similar Messages

  • Force learner to view a slide for a specific amount of time

    In Captivate 5, is there a way to force a learner to view a slide for a minimum amount of time -- and to grade them on viewing for that amount of time?

    Let's say that you need the user to stay on a slide for a minimum 30 seconds.  Here are two ideas:
    Idea One:  Delayed Navigation Buttons
    Set up the Captivate slide so that when the user initially lands on the slide there is no navigation on that slide.  (This means the playbar can't be on that slide either.)
    Set up the "next" button to appear when the playhead reaches 30 seconds on the timeline.
    This will ensure the user stays on the slide for at least 30 seconds because there is no other way to move ahead.  ( I'm a little unclear about how your grading system works, however, perhaps the "Next" button could also have points associated with it that you could use for grading purposes.) 
    Idea Two:  Points Attached to a Button
    When the user arrives on the slide, they are told they need to click a specific button in order to get points; however, that button will only appear when the user has been on the slide for 30 seconds.
    In this case, the button could also have a point value which you could use for grading purposes.

  • Crystal report xi r2 can't show control image

    i use vs2008 to develop asp.net
    Crystal report xi r2 can't show control image , not show print , export and all control image and when i click
    print or export image it error but other control are work. i run web application by debug mode in vs2008
    please help me to solve this problem.
    thank for advance

    Hi,
    You are facing issue as you are using non compatible environment.
    VS 2003 is only compatible with CR 9.1 (Bundle version which comes with VS), CR XI R1 and CR10.
    VS 2005 is only compatible with CR 10.2 (Bundle version which comes with VS), CR XI R2 and CR 2008.
    VS 2008 is only compatible with CR 10.5 (Bundle version which comes with VS) and CR 2008 SP0 and SP1
    You can download platform supported guide from the following link which will help you to create compatible environment:
    [https://websmp105.sap-ag.de/bosap-support]
    or search for BusinessObjects note #1279888 - How to find supported platform guide for any platform?
    Note can be searched from [here|https://www.sdn.sap.com/irj/sdn/businessobjects-notes] 
    Hope this helps
    Regards,
    Shweta

  • How can I perform data logging for a specific time??

    hello everyone,
    I am quite new in labview and I have a basic question regarding data logging. Currently I am using a cRIO9074 and doing some data logging for my test. The data logging it self works ok so far.
    But my problem is I would like to write my datas in a text file either for a specific time interval (ex)10 seconds) or for a specific amounts of data (ex)500 Samples). Can anyone give me some help regarding my problem?? Attached you can find my RT.vi 
    I would appreciate for anyhelp!
    Regards
    Yun 
    Attachments:
    BP250 Encoder Position & Velocity (Host).vi ‏92 KB

    Run your loggging program for that time. When your program terminates then it will write all the logged data so far in text file.
    Kudos are always welcome if you got solution to some extent.
    I need my difficulties because they are necessary to enjoy my success.
    --Ranjeet

  • How can I show icon Services for Object in PA30 Infotype 0019

    Hi guy.
    How can I show icon Services for Object in PA30 Infotype 0019 ?
    This icon display in some infotype example infotype 0024(Qualifications).But I wanna use in Infotype 0019.
    I don't wanna use menu "Assign facsimile".
    Best regards.
    Chutima.

    Sorry - should have said I'm using JDev 10.1.3.0.4 with JSF & ADF BC.

  • One of my imported MOV files turns "black" after editing with it for a time and I can't retrieve the images. This has happened three times, only this file. The placeholder is still there. Files are fine on hard drive. What gives? how to stop this?

    One of my imported MOV files turns "black" after editing with it for a time and I can't retrieve the images. This has happened three times, only this file. The placeholder is still there. Files are fine on hard drive. What gives? how to stop this? is in final cut pro 10.1.4

  • Can I download tutorial images for Adobe Photoshop Elements 2 online?

    Can I download tutorial images for Adobe Photoshop Elements 2 online?

    I'm not sure which images your referring to, unless you mean the ones referenced in the pse 2 help under Photoshop Elements 2.0 Tutorials
    (or some that may have been available thru the pse 2 updater)
    In the folder that photoshop elements 2 installs into, there are some Samples and Tutorial folders with some of those files.
    On a windows machine look in either
    C:\Program Files (x86)\Adobe\Photoshop Elements 2
    or
    C:\Program Files\Adobe\Photoshop Elements 2
    Also, on the pse 2 install cd, there are some images in the Goodies>Stock Art folder

  • How do you show thumbnail images for the contacts?

    How do you show thumbnail images for the contacts on the iPod?
    -Thank You

    In another thread I posted a suggestion to try when the iPhoto app in the Application folder will not work:
    after upgrading the OS, iPhotos (and Aperture for that matter) should still be in the Applications folder...
    And running well in 10.10.3.
    If it stops running in a next "update" do not throw it away: most apps will continue running as follows:
    In the Applications folder "rightclick" (CTL+click) the iPhoto app, then "show package contents", then click the MacOs folder open: you see the real app (dark grey), rightclick this and choose "make alias", an alias is made, move this alias to the Applications folder and use it to run iPhoto.
    Same for Aperture.
    In older OS this survived several upgrades....
    Lex

  • I have an abundant amount of images on my iPad and iMac and running out of storage space.  Where or what device can store these images for the least amount of money?

    I have an abundant amount of images on my iPad and iMac and running out of storage space.  Where or what device can store these images for the least amount of money?

    I would suggest
    http://www.lacie.com/fr/wheretobuy/index.htm
    LaCie Rugged Mini                            

  • How do I set a BG Image for a specific Table Cell?

    Hello...
    How do I set a Background Image for a specific table cell
    without it affecting the main page background image?
    thanks
    J

    Use CSS -
    td.special { background-image:url(foo.gif); }
    will style this table cell only -
    <td class="special">
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "JSloanSDRE" <[email protected]> wrote in
    message
    news:g2dl7n$pf5$[email protected]..
    > Hello...
    >
    > How do I set a Background Image for a specific table
    cell without it
    > affecting the main page background image?
    >
    > thanks
    > J

  • How do I insert a pdf file (image) into a project as a picture-in-picture clip that will run for a specified amount of time?

    I want to insert a pdf created from a ppt slide into a FCP X project that will run as a PIP for a specified amount of time. I was successful in bringing the image into the project as a clip but the default for the image is one second. When I try to change duration of the clip, I am able to enter a new time length but the actual clip doesn't change.

    You select the PDF image in the timeline. You use Control-D and enter the new duration. What happens?

  • I published my app and it shows us (waiting for review) and how much time it will take to (Ready for sale) ?

    i published my app and it shows us (waiting for review) and how much time it will take to (Ready for sale) ?

    5-10 days or longer.

  • Continuous averaging for a certain amount of time

    Hi
    In my program I have to use a start button to continuously average a value for a certain amount of time(lets say 3s) and keep and show the average the value. The state of the start button should return to off mode after that 3 sec so if the user hit the start button again it reset the array and calculate the average again.
    Would you please help me with this program. I have attached pic of what I ahev done
    With this vi I can take data after hitting start for 3 sec but I have these problems:
    1- I don't know how to calculate average value when finish getting data after 3 sec
    2- I would like the start button back to off mode after 3 sec so if I click on the start button again it reset the array and calculate the average again.
    Would u plz help me with this vi?
    Attachments:
    1q.jpg ‏169 KB

    Use mean function to average an array. And wire your time has elapsed boolean to a case structure and reinitialise your boolean control to default in the true case.
    Create invoke node as below, just in case you dont know.
    Beginner? Try LabVIEW Basics
    Sharing bits of code? Try Snippets or LAVA Code Capture Tool
    Have you tried Quick Drop?, Visit QD Community.

  • Continuing a loop for a set amount of time

    Hi,
    I'm am trying to alter a previously written program have run into a problem.
    The program is set up so that when the input exceeds a set level an output voltage to a buzzer is created; the buzzer continues as long as there is an input.  What I need it to do is to continue this output for a set amount of time.
    I've been searching the forum and found this straight forward solution from adamsjr.
    "The easiest way to do this is to use a two Tick Count functions. The first
    one is outside of a While loop, the second one is inside of the While loop.
    Wire the first one through a tunnel into the While loop, add on the appropriate
    ms (5*1000), wire the sum to one input of a compare function. Wire the
    other input of the compare function to the second Tick Count function. Exit
    the loop when the compare shows the second Tick count value is greater than
    the summed value."
    I've got placed the output subVI into a while loop and followed the above directions and this doesn't seem to work. I'm wondering if I would also have to include the input subVI into the loop or is there another possible solution
    Thanks ahead of time,
    Kristen

    Hi Kristen,
    You have the compare function implemented incorrectly.  You need to make sure that the first terminal of the "Greater than or equal" function connected to the output of the sum, and the second terminal to the tick count in the while loop.  The first terminal corresponds to x parameter and the second terminal is for the y parameter.  So if x is greater than or equal to y, then the loop will need to exit.
    You can see how long a subVI is taking if you put a flat sequence structure within your subVI around the entire subVI code.  The first frame would only have a tick count going into an indicator, the middle frame your normal code, and then the final frame would contain another tick count wired into another indicator.  Then you can subtract the second indicator value from the first and get hold long it took to execute the middle (core) of your code for that subVI.
    I highly suggest using the highlight execution and probes and other debugging techniques such as breakpoints to diagnose where the data is being held up.

  • How to generate a continuous sine wave for a given amount of time

    I am trying to output a continuous sine wave for a speaker, but I am having difficulty making it continuous rather than looping the signal for a given amount of time, which causes discontinuities. There is a VI in the Labview examples titles Continous Generation, but it produces a square wave. Is there a way to adapt this VI such that the amplitude and frequency can be used as inputs to create a sine wave?

    I found a VI that ships with labview(7.0)called continuous sound output. the output of this is a sine wave or you can change it to whatever you want.
    Sorry cannot help more
    Joe
    Joe.
    "NOTHING IS EVER EASY"

Maybe you are looking for