Can i sign into i tunes on
Can I sign into i tunes on my computer using another persons account and synch their i tunes librabry onto their i pod?
Hey grandkids7k,
Thanks for the question. The following resource provides troubleshooting information if you have forgotten your passcode:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the Connect to iTunes screen.
5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Thanks,
Matt M.
Similar Messages
-
What a night mare. I up dated the I Tunes and got a virus on my computer. Had to get it fixed and now I can not get access to my library of to sign into I tunes.
Hey grandkids7k,
Thanks for the question. The following resource provides troubleshooting information if you have forgotten your passcode:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the Connect to iTunes screen.
5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Thanks,
Matt M. -
Every time I need to sign in my old email ( which is now non existent ) keeps coming up .. I have changed all my main details and updated everything ?? Why is this happening ..;
You changed the ID in Settings>iTunes & App Store>Apple ID? Tapped your old ID and signed out then signed in with the new ID?
If you created a new ID - that could be the problem. There is a difference between changing the ID (for instance if you got a new email provider) and creating a whole new ID. Purchases are always tied to the ID used to make the purchase. You can't transfer purchases to a new ID. -
i have an apple i phone that is disabled because cant remember the password to get into the phone i was told to sign into i tunes to be able to unlock my phone. i have i tunes i get into on my i phone but can not get into it on my computer??
Hey grandkids7k,
Thanks for the question. The following resource provides troubleshooting information if you have forgotten your passcode:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the Connect to iTunes screen.
5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Thanks,
Matt M. -
hi i can sign into my other accounts using my user name and password but i cannot sign into i tunes can anyone help
Hello there, wirey54.
The following Knowledge Base article offers some good recommendations for troubleshooting connecting to the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Can't sign into apple support communities with icloud apple id
i realise this isn't the right community for this question, but apple don't have a support category called "apple support".
i have that problem where I have an appleid called "frumbert", which I got about 10 years ago. it is and always has been tied to my gmail email address. i used this for about 5 years worth of itunes purchases, then forgot it for a couple of years.
when I got an ipad I also got an icloud account, and stupidly signed up using my gmail email address as my icloud username. it's tied to the same gmail email address as my existing "frumbert" account. i've since made all my itunes and app purchases using my icloud appleid, and it's the one associated with my mac warranties and such.
so two appleid's share the same email address.
i can't sign into apple support commuities with it because I need a new username. i can't create a new username because the email address is tied to an account already (this one, the old one, "frumbert"). An account utilizing this email address already exists. Only one account per email address is allowed on Apple Support Communities. Apple's way of saying you're c-ockblocked!
but I can't also change the "frumbert" account because there's another account with the same email address, my icloud one.
fark! how does one get out of this mess?I'm having the exact same problem and so are a lot of other people. Apple's solution - shut up and create a new account just for the support community.
Smells outsourced to me! -
Using the right apple ID and password I can't sign into iMassage? Why
Using the right apple ID and password with wi-fi I can't sign into iMassage. Why?
Did you purchase Apple Care? If you did, you still have access to Apple Support. If not, go to your Apple Store and let them help you get it set up correctly. I'm sure it's something simple we're missing. Good Luck.
Do remember one thing. iMessage on iPad only works with other iOS devices. This means you can only text to people who:
1. Have an iPhone, iPad, or iPod Touch
2. And they have upgraded to iOS 5 or higher -
I have two different iCloud accounts - business and personal. I can't sign into Photo Stream with my personal account because it says my business account is my primary account. They are separate but equal accounts. I have tried deleting the iCloud account from my iPhone, then my MacBook Pro and signing in again on both devices. The iPhone says that my primary account ismy personal account (which is good) but my MacBook Pro still will not sign into that account so I can use Photo Stream.
Any suggestions? This iCloud stuff is getting annoying.you have a ps cs4 license for mac and you have some way of finding your serial number.
if yes, download an install the installation file. if you already have the installation file, what is its name and file extension? (eg, if it's one file, it should be a dmg file.)
if you need the installation file,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
how can I reset my iPad YouTube password? I can't sign into youtube on iPad. It says Username or password is wrong although both are correct when I log into YouTube account via Google. I also tried my husbands youtube login and password and the same outcome. Now I cant log into YouTube via the iPad account. I can log into Youtube via Google however my subscriptions and favorites are all gone. Can I reset the YouTube account located on the iPad? I cant seem to reset the password or delete the app and re-add. I dont want to reset the iPad since I have alot of videos and pictures on it.
Do you have Google 2 stage authentication turned on?
If so, you wont't be able to use your normal google password, but will have to instead generate an "application specific" password for the iPad YouTube app in the google security settings section. -
I can't sign into iCloud because my Apple ID doesn't work there. For some reason it gave me a .mac email and I don't remember the password. When it gives me the option to reset my password, it's my Apple ID password which I don't want to do. I have ended up chaning my Apple ID 3 times lately and I still can't get to my cloud management. What do I do?
Check if your Data and Time, and Time Zone are set to automatically: OS X Yosemite: Set the date and time on your Mac
Is this issue also appearing on new user account:
Isolating an issue by using another user account - Apple Support
Mac OS X: How to troubleshoot a software issue - Apple Support
Is this issue also appearing in safe mode: OS X: What is Safe Boot, Safe Mode? - Apple Support -
HT201317 can i sign into my icloud account from a friends computer so i can get to my pictures
Can I sign into my icloud account from a friend's computer so i can get to my pictures?
What you need is a file named Domain.sites (iWeb 2) or Domain.sites2 (iWeb 3). Copy it from your laptop to your other computer at home.
It's located in your Users/Home/Library/Application Support/iWeb folder. Place it in the same folder on the other computer.
All the files for the site are contained in that file/package. After editing you will have to publish the changes to your hosting server.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible in Lion or Mt. Lion enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
To open your domain file in Lion or later or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
HT203167 how can i sign into my itunes account?
How can i sign into my itunes account?
Select Store adn click Sign in at top right of the iTunes window.
Put in your username and password.. -
How can i sign into my icloud account on my pc
How can i sign into my icloud account on my pc?
In the iCloud Control Panel, if you have an iCloud account just enter the ID and password and sign in.
-
I can't sign into my iMessage I am putting in the right password and email address but very time I want to sign in it says
" iMessage Activation
An error occurred Try Again"
This is really frustrating and I need it fixed if you can help me please tell me!!!!
ThanksHere is a solution that worked for me, after nothing else would. Log out and back in to iTunes on your Mac/PC.
I had exactly the same problems as above, and no amount of network changes or even a full restore would help.
Finally, I went back to my PC, launched iTunes, logged OUT of that, then signed in again, this time with the new password.
Then I had to go back, and properly close Facetime and iMessages and sign in. It worked fine after that.
(To properly close an application, double click the home button, then hold down on the facetime app logo in the multitasking bar at the bottom, then press the tiny symbol.)
Best of luck. -
I can't sign into itunes, I get no error message.
I can't sign into itunes, I get no error message. Anyone have any ideas. I've reinstalled it and nothing seems to work..
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)
Maybe you are looking for
-
I am looking for information on iPad and iPhone apps and Mac software that are "top of the line" for academic research. The most current and comprehensive information I have found is dated July 2010.
-
Is i tunes out there????????????????? why have you not helped me in retrieveing my money?????????????
-
Make Checboxes In To Array In Dreamweaver (PHP)
Hi guys, am designing a seat reservation system. i want the check boxes to represent the seats I want to know how to make each check boxes into array and how to group all the check boxes in a single canvas so that it will store multiple values in one
-
How to delete perviously loaded request from cube
Hi All, I am loading a standard cube from r3 w/o PSA through DTP. 1 ) how to delete data automatically from cube w/o using Process chains.( previously we have a facility in Infopackage to delete old loaded data ) .In BI7 how to delete the same automa
-
Problem when specifying LDAP connection
Hello, i have a problem when creating a new LDAP connection. After selecting LDAP server from drop-down list (value "192.168.121.3:389" without quotes), the error message appears. Status : Failure -String index out of range: -1 This LDAP server is pr