Can I skip a song on only one station?

We have a baby and use a pre-made toddlers station and our own lullaby station. We often have to skip songs on the lullaby station because they're too loud. If we tell the lullaby station to never play a song will it be excluded from our toddler station?
We don't want to end up blocking good toddler songs from the toddler station by blocking them in the lullaby station

No, you cannot.
Simply remove it from the Playlist you don't want it to be in.

Similar Messages

IPod skipping iTMS songs - but only one account

Hi,
I'm not sure what my iPod is exactly. It's a 40GB mono screen iPod, about five years old. I thought that made it a 'classic' but perhaps not... anyway.
Since I updated iTunes last, the update deauthorised my accounts on my MacBook. One of these was my current account and I've got that up and running again fine. The second one was an old account from when I was on AOL which the nice Apple people kindly helped me convert into an Apple ID account and that, too, is now running again on my MacBook.
The weird thing is that that account won't play on my iPod. It just skips through all those songs.
It will however play them if I connect my iPod to my MacBook and play through the MacBook speakers. I've tried authorising it but it says my accounts are already authorised and anyway, I don't think that's quite how you do it on an iPod.
I'm sure it's something fairly simple but it's getting frustrating now.
I have tried doing a hard reset on the iPod, holding down Menu and the centre button but it still skips through songs on this one account.
Your help would be greatly appreciated.
Thanks
Charley x

Roaming: Heck! I think you are right. I'm not at home right now to check so I think I can check on that only through itunes. But, as I now recall, this happened to me before. These are all Christmas songs and I set them to skip after Christmas so "by artist" they are not included. The 158 are tracks added since last year and I forgot to set. Ugh!
Thanks for the tip and I'll update tonight once I confirm.

Can iTunes be set to play only one song and then stop when the song is finished and not go on to play another unless commanded?

Can iTunes be set to play only one song and then stop when the song is finished and not go on to play another unless commanded?

If you uncheck all of the songs, they will only play if explicitly commanded. Command-click in a checkbox and they will all be unchecked. Command-clicking again will check the all again should you want to do that.

How can I have multiple accounts and only one library

How can I have multiple accounts and only one library that all the purchased items feed into?

ask your wireless provider.

How can I add a stroke to only one side of text?

How can I add a stroke to only one side of text characters?

I'm probably misunderstanding what you want, so I'll just ask. Is this it?

Using camera accessory, I have imported photos to my iPad 3rd generation. By mistake I have imported multiple copies of same photos. Now if I want to delete additional copies I can't. It gives me only one option "Delete everywhere" instead of delete 1copy

Using camera accessory, I have imported photos to my iPad 3rd generation. By mistake I have imported multiple copies of same photos. Now if I want to delete additional copies I can't. It gives me only one option "Delete everywhere" instead of delete one by one, so that I can keep one copy of that photo.
Is there a way to delete additional copies of a photo and keeping only one?

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

Can I make OneDrive Pro sync only ONE-WAY?

Can I make OneDrive Pro sync only ONE-WAY?

That sucks. DropBox can.
We want to SYNC literature down to sales reps and not have the sales reps accidentally erase from the Cloud for all. Hence we want a one way SYNC to have them SYNC literature onto their computers for remote
access to the files.
Surely SharePoint cannot be that far behind DropBox.
Is there no way to achieve that?

How can i enable my cookies for only one website?

how can i enable my cookies for only one website?

CShaya wrote:
how can i enable my cookies for only one website?
Safari
There is no preference setting available for that.
Best.

Nokia X3-02 can't send text message to only one of...

i can't send text message to only one of my contacts... what happen? what should i do? help me pls... tnx...

Hi,
You can send the other contacts SMS but not only one contact, Right?
Then the issue is with your contact, maybe the number is not right or not the right format.
So check your contact number with number which you can send SMS.
Maybe it is best to delete that contact and create new contact which the format is the same with the others.
I hoe this helps.
Br
Mahayv

How could I put many song in only one album view?

I saved a lot of folders with many songs from my PC to my laptop. When I put all of these songs into my Music Library, It happens that many songs of the same album appears as if they were separated albmus, so my cover flow view has many "albums" that are only one song.
How can I Put these songs together again?
Thanks a lot

Thomas Sjöholm wrote:
Select all songs > Get Info > Options > Part Of Compilation (Yes)
But a couple of guest artists do not a compilation make....
See my post HowTo: Grouping Tracks Into Albums for some detailed advice on the different issues involved in making the library play nice in both iTunes and iPod, in particular *One album, too many covers*.
tt2

HT4314 someone is using my account on clash of clans, can you remove all the device that are cnnected to my apple id? so i will be the one who can use it because iam the only one who knows my password. please help me guys i need my clash of clans

Hi im allen. My problem is someone is using my account on Clash of Clans. Can you remove all device that at connected to my apple id? Will I be the only one who can access my game center and apple id thanks a lot apple team!
<Email Edited By Host>

Apple is not here.
There are only users here like yourself.
We can do nothing at all about any devices on you AppleID.

Can inherited events be used with only one processor?

Hi friends!
The question is quite simple: I have one parent event and several events which inherit from the first one. Every inherited event has its own properties and also the inherited properties (which have public visibility in the parent class so that the inheritance is automatic). I pass events to the CEP processor but it only works with the parent class and doesn't with the child ones. I mean, I'm using only one processor and only one CQL sentence.
Is it neccesary to configure one processor for every inherited event?
Thanks!

Hi friend!
Here you are:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:osgi="http://www.springframework.org/schema/osgi"
xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
xmlns:application="http://www.bea.com/ns/wlevs/config/application"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/osgi
http://www.springframework.org/schema/osgi/spring-osgi.xsd
http://www.bea.com/ns/wlevs/spring
http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
http://www.oracle.com/ns/ocep/jdbc
http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
http://www.oracle.com/ns/ocep/spatial
http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd
http://www.bea.com/ns/wlevs/config/application
http://www.bea.com/ns/wlevs/config/application/wlevs_application_config.xsd">
     <bean id="myConverter" class="com.bea.wlevs.adapter.example.mesevents.MeSEventsAdapter"/>
     <wlevs:adapter id="jmsInbound" provider="jms-inbound">
          <wlevs:listener ref="mesEventsChannel" />
          <wlevs:listener ref="inputPetitionChannel" />
          <wlevs:instance-property name="converterBean"
               ref="myConverter" />
     </wlevs:adapter>
<wlevs:event-type-repository>
<wlevs:event-type type-name="MeSEvent">
<wlevs:class>com.bea.wlevs.event.example.mesevents.MeSEvent</wlevs:class>
</wlevs:event-type>
<wlevs:event-type type-name="InputPetition">
<wlevs:class>com.bea.wlevs.event.example.mesevents.InputPetition</wlevs:class>
</wlevs:event-type>
</wlevs:event-type-repository>
<wlevs:channel id="mesEventsChannel" event-type="MeSEvent" advertise="true">
<wlevs:listener ref="mesEventsProcessor"/>
</wlevs:channel>
<wlevs:channel id="inputPetitionChannel" event-type="InputPetition" advertise="true">
<wlevs:listener ref="mesEventsProcessor"/>
</wlevs:channel>

<wlevs:processor id="mesEventsProcessor" />
<wlevs:channel id="mesEventsOutputChannel" event-type="MeSEvent" advertise="true">
<wlevs:listener>
<bean class="com.bea.wlevs.example.mesevents.MeSEventsBean"/>
</wlevs:listener>
<wlevs:source ref="mesEventsProcessor"/>
</wlevs:channel>
<wlevs:channel id="inputPetitionOutputChannel" event-type="InputPetition" advertise="true">
<wlevs:listener>
<bean class="com.bea.wlevs.example.mesevents.MeSEventsBean"/>
</wlevs:listener>
<wlevs:source ref="mesEventsProcessor"/>
</wlevs:channel>
</beans>
It says the following:
As you can see there are two input channels which are both connected to the JMS adapter as well as only one processor which is connected to the input channels and to the output channels. It is supposed that each event goes through each input and output channel but it fails and says the following:
Channels mesEventsOutputChannel and inputPetitionOutputChannel from the same query must have the same event type.
InputPetition is MeSEvent's child. It inherits all MeSEvent's preperties.
Does anybody know what is happening?
Thanks!

How can I play different videos with only one MediaPlayer?

I want to play two videos with only one MediaPlayer:
private static MediaPlayerBuilder mpB;
private static Media mLogo;
private static Media mSaludo;
private static MediaPlayer mpLogo;
private static MediaView mvLogo;
private static Group gLogo;
public void start(final Stage stage) {
mLogo = MediaBuilder.create().source(myGetResource(VIDEOLOGO_PATH)).build();
mSaludo = MediaBuilder.create().source(myGetResource(VIDEOSALUDO_PATH)).build();
mpB = MediaPlayerBuilder.create();
mpLogo = mpB.media(mLogo).build();
mvLogo = MediaViewBuilder.create().mediaPlayer(mpLogo).build();
gLogo.getChildren().add(mvLogo);
sActual = new Scene(gPozos, WIDTH, HEIGHT, Color.BLACK);
stage.setScene(sActual);
stage.show();When I want to play mLogo:
sActual.setRoot(gLogo);
mpLogo.play();Then, when I want to play mSaludo I do this:
mpLogo = mpB.media(mSaludo).build();
sActual.setRoot(gLogo);
mpLogo.play();or this:
mpB.media(mSaludo).applyTo(mpLogo);
sActual.setRoot(gLogo);
mpLogo.play();or this:
mpB.media(mSaludo);
sActual.setRoot(gLogo);
mpLogo.play();But is impossible to change the Media. It doesn't work. Sometimes I play mLogo video and sometimes (depends on the code) the video mLogo doesn't start and I see an image of the first keyframe and nothing else. I have no exceptions, no errors, nothing.
I want to play mLogo and then mSaludo. How can I do this?
Thanks
Noelia

Ok, I understand, if I have 100 videos I have to build 100 MediaPlayers but only one MediaView.
Here I post my code with only two videos, I included all the asynchronous errors.
package pruebafx;
import java.util.logging.FileHandler;
import java.util.logging.Level;
import java.util.logging.Logger;
import javafx.application.Application;
import javafx.event.EventHandler;
import javafx.scene.Group;
import javafx.scene.Scene;
import javafx.scene.media.Media;
import javafx.scene.media.MediaErrorEvent;
import javafx.scene.media.MediaPlayer;
import javafx.scene.media.MediaView;
import javafx.stage.Stage;
* @author Solange
public class PruebaFX extends Application {
    private static final Logger logger = Logger.getLogger("pruebafx.pruebafx");
    private static final String MEDIA_PATH = "/images/";
    private static final String VIDEOLOGO_PATH = MEDIA_PATH + "logo.flv";
    private static final String VIDEOSALUDO_PATH = MEDIA_PATH + "saludo.flv";
    private static Group root;
    private static Scene scene;
    private static MediaPlayer mpLogo;
    private static MediaPlayer mpSaludo;
    private static Media mLogo;
    private static Media mSaludo;
    private static MediaView mediaView;
     * @param args the command line arguments
    public static void main(String[] args) {
        Application.launch(args);
    @Override
    public void start(Stage primaryStage) {
        try {
            FileHandler fh = new FileHandler("DisplayManagerlog-%u-%g.txt", 100000, 100, true);
            // Send logger output to our FileHandler.
            logger.addHandler(fh);
            // Request that every detail gets logged.
            logger.setLevel(Level.ALL);
            // Log a simple INFO message.
            logger.info("Starting PruebaFX");
        } catch (Exception e) {
            System.out.println(e.getMessage());
        primaryStage.setTitle("Change Videos");
        root = new Group();
        mLogo = new Media(myGetResource(VIDEOLOGO_PATH));
        mSaludo = new Media(myGetResource(VIDEOSALUDO_PATH));
        mpLogo = new MediaPlayer(mLogo);
        mpSaludo = new MediaPlayer(mSaludo);
        mediaView = new MediaView(mpLogo);
        mpLogo.setOnEndOfMedia(new Runnable() {
            public void run() {
                mpLogo.stop();
                mediaView.setMediaPlayer(mpSaludo);
                mpSaludo.play();
        mpSaludo.setOnEndOfMedia(new Runnable() {
            public void run() {
                mpSaludo.stop();
                mediaView.setMediaPlayer(mpLogo);
                mpLogo.play();
        mLogo.setOnError(new Runnable() {
            public void run() {
                logger.severe("Error en Media mLogo");
        mSaludo.setOnError(new Runnable() {
            public void run() {
                logger.severe("Error en Media mSaludo");
        mpLogo.setOnError(new Runnable() {
            public void run() {
                logger.severe("Error en MediaPlayer mpLogo");
        mpSaludo.setOnError(new Runnable() {
            public void run() {
                logger.severe("Error en MediaPlayer mpSaludo");
        mediaView.setOnError(new EventHandler<MediaErrorEvent>() {
            public void handle(MediaErrorEvent t) {
                logger.severe("Error en MediaView mediaView");
                logger.severe(t.getMediaError().getMessage());
        root.getChildren().addAll(mediaView);
        scene = new Scene(root, 300, 250);
        primaryStage.setScene(scene);
        primaryStage.show();
        mpLogo.play();
    public String myGetResource(String path) {
        return (this.getClass().getResource(path).toString());
}My video saludo.flv hangs up.
Here is the content of the log file:
<?xml version="1.0" encoding="windows-1252" standalone="no"?>
<!DOCTYPE log SYSTEM "logger.dtd">
<log>
<record>
<date>2011-12-12T12:03:53</date>
<millis>1323702233578</millis>
<sequence>0</sequence>
<logger>pruebafx.pruebafx</logger>
<level>INFO</level>
<class>pruebafx.PruebaFX</class>
<method>start</method>
<thread>12</thread>
*<message>Starting PruebaFX</message>*
</record>
<record>
<date>2011-12-12T12:04:06</date>
<millis>1323702246109</millis>
<sequence>1</sequence>
<logger>pruebafx.pruebafx</logger>
<level>SEVERE</level>
<class>pruebafx.PruebaFX$6</class>
<method>run</method>
<thread>12</thread>
*<message>Error en MediaPlayer mpSaludo</message>*
</record>
<record>
<date>2011-12-12T12:04:06</date>
<millis>1323702246109</millis>
<sequence>2</sequence>
<logger>pruebafx.pruebafx</logger>
<level>SEVERE</level>
<class>pruebafx.PruebaFX$4</class>
<method>run</method>
<thread>12</thread>
*<message>Error en Media mSaludo</message>*
</record>
</log>
Do you know when will be available the 2.0.2 version???
I have to finish my application!!!
Thanks.
Noelia

How can I correct that emails for only one of my address going direct to my trash file before even being read and this just started a while back not before?

have been living with this for a while, do not remember when it started and have already try different ways a solving the problem but nothing has corrected the situation.

thanks for ur suggestion, no help. still goes to trash for only one of my email addresses, other two no problem.

How can I restrict options result to only one cost center?

In transaction KS03 (Display cost Center), when I search for a cost center (hit F4), I have an option to drill down by Company code, controlling area, Cost Center Category, Person Responsible etc.
My question is, how can I restrict users to select only controlling area they are authorized for ? Is there any authorization object I can use to restrict user's access to particular value in the table CSKS ?
Thanks,
Karan.

Hi Karan,
If you want to restrict on the values users can return when using F4 lookup then there may be some useful info in the following link:
Authorization object for capacity planning CM03

Can I skip a song on only one station?

Similar Messages

Maybe you are looking for