Can I specify more than one para tag for master page mapping?

Hi,
I want to map the same master page to be used by four different tags. Must I create a new row in the mapping table for each or can I separate the tag names by a comma and a space, for example, "Body, Bullet, Heading1, Note"?
I tried the latter and expected it to work, but it did not.
Thanks,
Sean

> ... create a new row in the mapping table for each ...
That works, and has no side effects that I've seen.
It appears, by the way, that FM applies the MP based on the first para tag found that has a MasterPageMaps table entry, so multiple matches per page, even conflicting, are not a problem, as long as getting the MP for first-found is OK with you.

Similar Messages

  • Can I add more than one menu to a master page?

    I have been struggling with this and can't find any tutorials. I am trying to add another menu to a separate page that only shows up on one group of pages. The problem I am having is the menu titles from the one that is already up comes on and I can't figure out how to get multiple menus on one page. Is there anyone that can help? I have created a menu from scratch using some different methods, but I would like to be able to not have to do that. Thanks!

    Hi Carlton,
    The automated Menu in Muse picks up all the pages that have show in the Menu option enabled. So, if you want a menu that only shows a group of pages, you will need to use a manual menu in Muse, you will not be able to use the automated one.
    - Abhishek Maurya

  • Can we declare more than one sequence tags in a complex type?

    Hi all,
    Can we use more than one <sequence> tags in the xml schema?
    <xs:complexType name="Demo">
    <xs:sequence minoccurs = "1" maxoccurs = "1">
    </xs:sequence>
    <xs:sequence minoccurs = "0" maxoccurs = "1">
    </xs:sequence>
    </xs:complexType>
    If you observe the above sample xml there are two sequences in one complex type with different values for minoccurs and maxoccurs. Is this xml valid? why I need this is I have an
    XML with lot of elements some of them should have minoccurs = "1" maxoccurs = "1" and some other should have the other combination of min and max attributes. I want to
    declare it in the sequence rather than declaring beside each individual element. is that possible?
    Thanks.

    Hi,
    Is this xml valid? No, a complexType expects only one child, but you can do this :
    <xs:complexType name="Demo">
      <xs:sequence>
        <xs:sequence minOccurs = "1" maxOccurs = "1">
        </xs:sequence>
        <xs:sequence minOccurs = "0" maxOccurs = "1">
        </xs:sequence>
      </xs:sequence>
    </xs:complexType>However...
    XML with lot of elements some of them should have minoccurs = "1" maxoccurs = "1" and some other should have the other combination of min and max attributes.
    I want to declare it in the sequence rather than declaring beside each individual element. is that possible?minOccurs and maxOccurs declared in the sequence apply to the sequence as a whole, not to its individual components.
    For example :
    <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
         <xs:complexType name="Demo">
              <xs:sequence>
                   <xs:sequence maxOccurs="1" minOccurs="1">
                        <xs:element name="test1" type="xs:string"/>
                        <xs:element name="test2" type="xs:string"/>
                   </xs:sequence>
                   <xs:sequence maxOccurs="1" minOccurs="0">
                        <xs:element name="test3" type="xs:string"/>
                        <xs:element name="test4" type="xs:string"/>
                   </xs:sequence>
              </xs:sequence>
         </xs:complexType>
         <xs:element name="root" type="Demo"/>
    </xs:schema>What you expect will work for the first sequence of elements (test1 and test2) but anyway minOccurs and maxOccurs for elements default to 1, so why bother wrapping them in a sequence?
    If I understand what you want correctly, it won't work for the second sequence.
    For instance, this will be valid :
    <root>
      <test1/>
      <test2/>
      <test3/>
      <test4/>
    </root>but this will not :
    <root>
      <test1/>
      <test2/>
      <test3/>
    </root>

  • How can I maintain more than one contact person for a supplier

    Hi
    As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
    How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
    we are in SRM 7, and currently we are creating contact person throug customised BDC.
    please advice.
    Thanks & Regards
    NITIN
    Edited by: nitinkk on Sep 9, 2011 10:22 AM

    Dear Yaniv,
    Thanks for your information,
    I am able to create  users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
    Thanks & Regard
    NITIN

  • How can I create more than one main window in a page of SAP SCRIPT?

    How can I create more than one main window in a page of SAP SCRIPT? If anybody helps me I will be obliged.
    Regards,
    Subhasish

    Hi Ganguly,
    It is possible to have more than one main window in a same page.
    You create a main window and simply you copy and past it in the same page.. it will create first main window name as MAIN and other main windows as MAIN01,MAIN02.... up to MAIN99.
    Contets flow from MAIN , MAIN01, MAIN02.......................MAIN99. contents after filling the current window it flows to next window(by default, you skip as well with some keyword not sure could be NEW-WINDOW)
    you want print the main window data twice? or you want to create two main window in the same page ?
    1. give two copies in the no of copies in the output type screen ( Which pop up is coming after excute the program ).
    2. create two page with the same script form.
    3. you can write the coding inside the program to print twice the same page.
    Hope this information use full to you..

  • Can you print more than one photo on a sngle page in iPhoto, as you can in Picasa?

    iPhoto printing--
    Can you print more than one photo on a single page in iPhoto, as you can in Picasa? Terrible waste of paper and time to do it one at a time!  I 've been away from Macs for several years ( I know, shame on me) but I thought I remembered more printing flexibility.  Help, anyone?

    Yes - select the photos and print - select the print size and paper size (be sure they will fit with some small borders) and click customize - in settings select multiple photos per page (the preview will reflect this selection) and print
    LN

  • Can we maintain more than one shipping condition for a customer

    Hi,
    Can we maintain more than one shipping condition for a customer

    Hi Raj,
    Yes you can maintain the different shipping condition for one customer but for this that SOLD To Party should have different SHIP to Party also as we mainatin the shipping condition for Ship for the party. In other words you can maintain as many shipping condition equal to the number of ship to party.
    Other way is if that customer is in different sales area then you can maintain the different shipping conditions for that customer in all the different sales area.
    Hope I could make myself clear enough to help you.
    Please reward if its useful.
    Regards,
    Abhi.

  • How can I create more than one printer queue for a printer

    I would like to have more than one "default" setting for my printer.  This is so I can use a 3rd party print utility (fingerprint) to print to a non-airprint printer from my ipad.  The utility prints using the default configuration.  I don't need to get fancy here.  Just "draft B&W' , "normal", and "Color best quality".  If I need something else, I can always email the document to my MacBook.  The utility has something about a virtual printer, but all I could find about that is that it is used for PDF printing and maybe a workflow.
    My technology level:  Used to be a programmer,  after a decade of retirement, I can't even program an applescript today.

    Take a look at this add-on.
    https://addons.mozilla.org/en-US/thunderbird/addon/signature-switch/

  • Can I add more than one movie to the movie page

    I'd like to put up a gallery of movies  but don't know how to do that.  How can I add more than one movie to the movie template page?
    Thanks,
    Gina

    I use the YouTube widget. It has the advantage of not loading clips until one actually selects the clip. When I started I just dragged the quicktime files to the page...not a good idea as it forced a viewer to wait for all of them to load.
    Miro has some options.
    Hugh

  • Can I use more than one Apple ID for an Apple TV?

    I wanted to use more than one Apple ID account on my Apple TV, is that possible?

    Welcome to the Apple Community.
    You can only use one ID for purchasing from the Apple TV, but you can stream content from multiple libraries even though they have different ID's

  • Can there be more than one transport targets for a business system in sld

    Hi All,
    I have a question about transport targets in sld for sap xi 3.0 sp19.
    We have a requirement where a business system needs to have two transport targets.In SLD i see that only one transport target can be assigned. Is there any way to assign more than one transport target to a business system?
    I know that there can be more than one source for a business system where more than one  different business systems have the same business system as the target.
    I am not sure if a business system can have more than one transport target .If yes , what is the way to add more than one ?
    Please help .
    Thanks,
    Padmaja

    Hello,
    I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
    As far as I know, you would have to change the target everytime you will transport it to a different target e.g 3 target systems = 3 times you change the transport target in SLD.
    Regards,
    Mark

  • Can I use more than one flash-drive for ready-boost on Satellite L650/0ed

    Hi,
    I have a toshiba Satellite L650/0ed, is it alright if i use more than one 8gb flash-drive for 'ready boost' - what is the maximum number of flash-drives use can dedicate to 'ready-boost'.
    In addition, if i use a 16gb flash-drive, will this dedicate more memory to 'ready-boost'.
    Why is the seagate 1tb 3.5 expansion drive not compatible for ready-boost.
    Thank you,
    -Brent907

    Hi mate
    Please check this Microsoft page which describes the ReadyBosst
    http://windows.microsoft.com/en-US/windows7/products/features/readyboost
    There you can find this statement:
    +ReadyBoost works with most flash storage devices. In Windows 7, it can handle more flash memory and even multiple devices *up to eight* , for a maximum 256 gigabytes (GB) of additional memory.+
    Hopefully this can be helpful!

  • How can I create more than one different signatures for one account or for one address?

    I want to vreate 2 jr more signatures for one account. For example, in different languages, with different text, etc.

    Take a look at this add-on.
    https://addons.mozilla.org/en-US/thunderbird/addon/signature-switch/

  • Can i use more than one email address for one account

    I created one user account. I would like to create and use three separate email address for this one account, which will all show under one profile. Is that possible, and if so, is it free to do so? Thank you.

    You can add more identities to a single profile.
    Go to Tools -> Account Settings -> <your account> and click the Manage Identities button on the bottom right. That's the place where you can add additional e-mail addresses for your account.

  • How can I define more than one termination character for RS-232 interface communication?

    Hi,
    I have to communicate through the PC's RS-232 interface with a microprocessor board. I am using the "Advanced Serial Write and Read.vi" out of the LabVIEW examples and it works on principle.
    My problem is the termination character: It looks like I just can set one termination character, EITHER 0xA (so LF / newline) OR 0xD (CR / carriage return), but I have the need to react on various termination characters like "<CR> <LF> <CR> <LF> OK <CR> <LF>" or "<CR> <LF> <LF>"; which I would like to set in a control (this VI will be used in a TestStand sequence).
    Is there a way to do that, so that I can set wichever termination character(s) I need? The property node in "VISA configure serial port" just accepts an unsigned integer, nothing else. Sure I can get it running with the timeout - but this is not very nice and extends testing time unnecessarily.
    Thanks & Regards!
    Regards,
    gedi
    Solved!
    Go to Solution.

    That would be for the write. The poster is asking about the read. For the read you will need to write your own read routine. You will basically need to use a loop and inside the loop use the VISA Bytes at Serial Port to see if there's any bytes available. Read that many bytes, and append them to a string that you build up in a shift register. After concatenation check to see if you've got the termination characters. If so, the read is done. Fairly simple. Be sure to turn off the termination character enable in the VISA Configure.

Maybe you are looking for