Can I split a single core across different LDoms?

Back in LDom version 1.0.3, there was a warning from Sun saying:
"Running threads from the same core in separate domains can lead to unpredictable and poor performance."
This limits an eight-core T5220 to have only 8 LDoms.
Does anybody know if this is still true for LDom version 1.3? Can I break that limit such that my 8-core T5220 can run 64 LDoms smoothly and reliably?
Thank you.

I don't think the recommendation has changed but if the work load is light enough.it could work. I'm running 13 guest LDoms on a T5220. Most are 4 VCPUs and 4GB memory. This has been running without problems for about a year. (note: I did assign a whole core to the primary domain.)
I use Orca to monitor overall performance. I have recently bumped a couple of the production LDoms to 5GB but not seeing any problems with cpu.
have a good week,
Glen

Similar Messages

  • Splitting Music and Podcasts Across Different Discs

    Is it possible to split Music and Podcasts in the same library across different discs? The reason is my music is too big to get on my laptop drive so I have an external disk drive that is always plugged in when I'm at home. However I want to take podcasts with me when I travel so I want them to be put onto my laptop hard drive. I know I could probably achieve this by creating 2 libraries (although I haven't tried yet) but would prefer to see if I can do it with one.

    Put its internal drive into an enclosure and copy the files off.
    (116237)

  • Can I split my iTunes library across two hard drives?

    I am busy ripping my huge movie collection into an iTunes library, so I can play through my new Apple TV to my HDTV. Trouble is, it looks like I'll probably need at least 4TB's of HD space before I'm all finished. What I would like to do is to buy an external HD unit with two 3TB drives, and split my iTunes library across them, while still being able to view all of the movies on both drives all of the time, and give me lots of extra room for future expansion.
    Is this possible? If not, does anyone know of an aftermarket Thunderbolt 4TB external HD? I found a 4TB drive, but not with Thunderbolt.
    Thanks.

    I have the same question.
    I would like to be able to do the same thing with all my media. I'm a DJ and certain aspects of Mac Os X Lion or iCloud, and iTunes Match, don't favor folks with tons of media, storage wise. I'm not happy that there's a limit on how much space iCloud will give you. Yet, I feel forced to upgrade to Lion within the next 4 days. I've been hesitant to rip my collection or even upload all those digital copies because where will I put all those files. I agree with needing like 4-8T just to store, but how? I don't have Thunderbolt, only Firewire on late '08 iMac 20" and USB on 08 MacBook 13" Aluminum. Bleh!
    If you can use Time Capsule to back up your entire network with more than one computer, it would seem likely that you should be able to piggy back 2 xTime Capsules. I believe they come with 2-3Ts now and you can get them refurbished? I'm gonna look at Time Capsule Support to find out for myself, I'll let you know what I find, also. One thing I did noticed was that I had uploaded a bunch of Digital Copies from movies I had bought from Blu-Ray Combo Packs like 2 years ago and deleted them from MacBook for more space, only to recently find that they had been saved as purchased items from the iTunes Store. So now I can grab them from iTunes and watch them anytime off my Apple TV.
    Good Luck,
    Jenn

  • Can iTunes split content/settings to two different devises on the same computer?

    My friend has an iPod and has set up iTunes with his settings and songs. I am getting an iDevice, we share the same computer but we do not want the same things on our devices. Can iTunes have different settings for different devices? What can we do? FYI I am on Windows 7 (if that makes any difference).

    Yes, in terms of multiple devices but I doubt an iPad air be able to sync to something as old as iTunes9.  Usually iOS devices need the version of iTunes that was current at the time the device was sold.  I don't know all the system requirements by heart but I strongly suspect if you truly have a G5 (PPC) computer there is no way you will get a newer device to work with it.  To do so would require a system upgrade higher than you can do on a G5.

  • How can I Split the PDF File into different pages?

    Hi,
    My requirment is to split the pdf file , which is obtained by using FM "convert_otf" , into seperate PDF file for each employee data(PERNR).
    Please suggest me the way to slipt the PDF file that has to be downloaded into the presentation server.

    Hi,
    Ok, looking at that programm didn't actually help me very much to understand what's going on, or where you have the CONVERT_OTF call... Regardless, if the suggestion by Raymond is not feasible in your scenario, the thing I'd try to do is - splitting the spool (OTF) contents before calling CONVERT_OTF into individual documents (feeding it to convert FM piecemeal)... The link to OTF format and commands documentation is here.
    Again, it's difficult to give a good algorithm without knowing the exact OTF contents (could you perhaps somehow export the display of spool in RAW format and attach here?) but it would boil down to approximately following:
    1) set the &first_page per PERNR = 1;
    2) run through OTF lines until the &end_page for PERNR has been identified somehow (hopefully there are Begin/End Form OTF commands '//' in that spool... and they correspond to the split of spool you need...);
    3) extract the otf contents from &first_page to the EP command of &end_page into separate OTF itab and, if necessary, add // (End of form) command at the end of itab;
    4) call CONVERT_OTF on the table and download;
    5) set the &first_page per PERNR = &end page + 1;
    6) repeat from 2) until end of spool OTF data
    Something like that... Depending how the Sapscript translates into OTF, you may also need to prepend a few commands found at the very beginning of the spool to each extracted invividual OTF document...
    I Hope you can get the gist of what I'm suggesting... splitting OTF is definetly easier than trying to split PDF, I feel. It's not ideal solution, because - what if the structure of OTF contents you would be realying on changes for some reason..?
    cheers
    Janis

  • How can I Split the String in to different strings

    Hi All,
    I have created a table A
    If i select * from A
    Result is :
    1,2,3,4 - Line 1
    11,222,3222,422 - Line 2
    Now i what to split the data like by using substr and instr
    A , B , C , D
    1 2 3 4
    11 222 3222 422
    Can any one help me in this query,i need the full query..pls
    Regards

    excuse me..
    it's unclear ..
    Now i what to split the data like by using substr and instr
    A , B , C , D
    1 2 3 4
    11 222 3222 422
    are u trying to select same result from table A to other tables B,C,D
    what r the fields number u have,what their datatypes..?
    Regards,
    Abdetu..

  • HT201209 Can i redeem a single code for different itunes accounts?

    I have a large gift card that I want to split between multiple itunes accounts in my family.  is this possible?

    No it isn't possible, sorry.

  • HT2476 how can we share a single application across all users on a mac desktop?

    My wife and I are attempting to balance our finances. We each have separate profiles on our Mac Desktop.21.5 in Late 2009 using OS X 10.9. However, we would like to access the same application from both of our accounts. Specificially, we downloaded iBank using her profile then mine then we created our own "combined" acoount.
    If we could both access the same application from each of profiles and also the same shared iBank data file that would be ideal. But everytime we try a configuration, (sharing the data file, sharing the app) we are locked out on the next login.
    Any suggests would be helpful.
    thanks!

    Add the SWC to the library-path options of the other modules Project Properties.

  • HT2736 How can I gift an iTunes item across different regions?

    I live in the US and my iTunes account is set-up in this region. Is it possible to gift something from iTunes to someone living in the UK who has a British iTunes account and British-bought iPhone?

    At the moment it's only possible to gift items (including gift certificates) to people whose account is based in the same country as your own - if you try it then it may appear to then go through, but the recipient won't be able to redeem it.

  • How can i split a long single video with many different scenes in it ?

    how can i split a long single video with many different scenes in it ? in premiere pro cs3

    Yep better ask in the Premeire Pro forums, but while loading their forum page check the cutter tool (C) it will allow you to cut your footage

  • Material for a single project spread across different locations

    Dear Friends
    my client is executinig trun key projects. One single project may be spread across different geographical locations. Say Project name is "PRJ001".
    PRJ001 will be executed in Bombay, Hyderabad, Chennai.
    There are 2 scenarios for procuring materail:
    1. Since my these places are quite far away, I might procure material from a venodr near to these locations.
    2. I might give PO to one single vendor to dispatch material to these different locations for project execution.
    In the both the cases, how to handle material?
    What will be best option? Should I create a storage location (my client stores material @ site as these projects run for years)?
    I'm procurial material as Project Stock (Q).
    Say Bomaby location needs 500 no. of material, Hyderabad location needs 700 no. of material, Chennai location needs 300 no. of material.
    Now how do I ensure that the right material with right quantity is reaching respective project site?
    In some cases, project runs in remote location. Where there won't be any connectivity/ access to system. In such cases, if the site engineer enters GR/ IR & activity confirmation in excel sheet & later on sends an e-mail with this excel sheet to the office. How can we upload it to the system so that it updates the required fields in the system?
    Please give your suggestions.
    I appreciate your support/suggestion .
    Thanks

    Hi Amaresh,
    I think your Option no. 01 holds good for your requirement. You can define the corresponding Project sites in Chennai, Mumbai and other places as Storage locations. Better define Seperate storage locations for different site locations.
    I think having a delivery schedule with the specific requirement quantities and the storage location should resolve your issue of handling different quantities for the same material. This you can discuss & sort it out with your MM consultant.
    Hope this gives some idea.
    Regards,
    L.Balachandar

  • How can I split these numbers 05/24/2014,"55","15","49","16","28","18","2", pnto different columns?

    How can I split these numbers 05/24/2014,"55","15","49","16","28","18","2", pnto different columns?

    replace:
    with a tab
    copy the text:
    05/24/2014,"55","15","49","16","28","18","2"
    into a text box, then replace the "," with a single tab and replace the ," with a tab, then replace ", with a tab
    then copy, then select a cell, then paste
    05/24/2014,"55","15","49","16","28","18","2"
    ends up looking like:
    05/24/2014     55     15     49     16     28     18     2   (do NOT copy and paste from here... the forum replaces the tabs with spaces... so it won't work)
    when you copy and paste into a table in Numbers it looks like:

  • Can BPM maintain flow across different applications

    Hello,
    I have a requirement where I have to maintain the business flow across different applications(Siebel CRM, Oracle Financials and third party applications) with out the end user knowing.
    Is it possible with BPM to navigate users from one application to another application (CRM Application-> Third party Application -> Financials)? If there is a solution availabe with BPM or a different application please provide the same doc. Appreciate your help.
    Regards,
    Jay

    Hi,
    Yes. Oracle BPM can maintain a flow across multiple applications without the end user knowing. It is something it was built to do.
    First, applications like the ones you mentioned have an API (typically web service today but older applications exposed their API as Java POJOs, EJBs, COM, etc.). For Oracle BPM to access the applications, you need to expose the API in Oracle BPM's catalog. Customers that have a service bus expose the application APIs in the service bus and then Oracle BPM catalogs the service bus proxy services. Customers that do not have a service bus can expose the application APIs directly in Oracle BPM's catalog. Either way will work.
    Second, you'd design a process with a series of Interactive (human activities) and Automatic (activities that invoke the components that in turn invoke the APIs for your applications without human intervention). You'd add something called instance variables that carry the information throughout the life the process for each work item instance. Interactive activities are placed into roles with a name associated with them (e.g. CSR or Manager) so the work done in each activity is done by the right type of person. Interactive activities can be set up where the work item instance goes to a specific person instead of everyone in the role where the activity is located (e.g. send the instance to the CSR that talked to the customer last time).
    Third, at runtime as each work item instance is created (e.g. "Order 227") in the process the work item instance flows to one of the process's Interactive or Automatic activities. If it flows into an Interactive (human) activity, the end user assigned to the role where the activity is located clicks on an item in their web based Oracle BPM WorkSpace's inbox for the specific work item instance that they are interested in working on (again - perhaps "Order 227"). Once clicked by the end user, a UI presentation (either built using Oracle BPM's WYSIWYG presentation editor or a JSP) shows the work that needs to be done specifically by that end user. The UI presentation is already populated with the information gathered from a database or a previous API call from an Automatic activity. All this is done without end users having to cut out of one application and then paste into another application's screen - the right contextual information is sent to the right person at the right time. Once the end user finishes their manual task, the work might flow to an Automatic task that invokes another applicaiton's API automatically from the logic and variable information gathered in earlier activities in the process.
    All this is done without the end users knowing that they are flowing through multiple applications to get their work done.
    Hope this helps,
    Dan

  • Why can't lightroom across different folders like Photoshop Elements can?

    I have access to Lightroom through CC and I'd like to use it more, but it cannot do a very basic thing that Photoshop Elements, a consumer-oriented product, has been doing for years. That is, stack across different folders. I keep my large RAW files on an external hard drive but keep the edited .jpg files on my computer's main drive. In the Elements library I stack those photos and any other versions such as .psd files. Very useful and I don't understand why this has never been possible in Lightroom.
    An additional wish is that I could import my Elements library into Lightroom, complete with stacking, keywords, etc. That would be fantastic.

    This blog will explain how to install Elements as an external editor in lightroom.  The main thing to remember it to point Lightroom to the EDITOR and not the Elements Startup screen where you can choose Organizer or Editor.  If you don't point to the EDITOR the photo will not show up in Elements
    Lightroom & Photoshop Elements – “Edit In” Issues

  • Can "jpeg+raw" imported single file be split into jpeg and raw files?

    I manage to choose to import my jpeg and raw pictures as single jpeg+raw files accidentely. What means with this format? can I split this "jpeg+raw" pictures into jpeg and raw again? If you edit a jpeg+raw picture are you just working with the raw file, I mean I saw that I could change the exposure on the file which you only can do on raw files. Is it a bad idea to import jpeg and raw pictures as a single file? I really don´t understand the properties of this "jpeg+raw"-file
    /Magnus Lightroom rookie

    With RAW+JPEG, the JPEG is only used for the initial Library view, prior to generating previews from the RAW file. Once you have generated previews and/or developed the image, the JPEG is unused. The edits you make won't affect the JPEG at all. It is, however, still tied to the RAW as metadata, so deleting the JPEG will flag your image as having problems (and list it as "missing" even though it's very clearly in your catalog). Tuning off the option to handle RAW+JPEG together in preferences won't fix past combo images, but it will avoid making this idiotic mistake in the future. After turning it off, export your metadata to the RAWs, then delete them from the library (not the disk) and then reimport them without the JPEGs. Peace will rule the world.

Maybe you are looking for