Can I split the output of my airport to more than one device?

I have an apple airport connected to my stereo. This allows me to listen to my itunes library over my household stereo. I want to hook up a second stereo, with speakers in a different room. Can I split the RCA outputs so that it goes to a second stereo?

bayfish,
edex67 is right that a second AirPort Express would do the trick. It would have the advantage that you could select from the Mac which stereo got the signal, and you could even drive separate signals to the two stereos should you (or your guests) have a second AirPlay source.
If you want to try the splitter idea, it would likely be cheaper than another Express, but don't buy the cheapest cable, especially for the long run to the second room. If you have the inaudibility problem that edex67 mentioned, you can try turning up the volume on the stereo(s)..

Similar Messages

Can I split the screen in Adobe to show more than one ducument at the same time? ie. view three different documents on one screen

I am trying to look at three Adobe documents at the same time. Can I split the screen to do this, otherwise I must keep flipping back and forth to read the documents.

You can arrange the open windows in any way that suits you (assuming you're on Windows - not Touch - or Mac). You can't link the scrolling though.

How can i use the same front panel graph in more than one events in an event structure?

i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.

Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi ‏12 KB
graph and local variables.vi ‏12 KB

Can i use the same socket to connect to more than one servers

hi,
I'm new to java. I want to know whether a socket created using Socket() constructor can be used to connect to multiple servers, not necessarily at a particular point of time. ie, i want to connect to various servers using a single socket and register some info abt them, possible using a loop, one by one. I use connect() method to connect to particular server.
In other words is Socket class is mutable.
Edited by: itsraja on Feb 25, 2008 5:50 AM

In short, I don't think so.
Setting the server name for a socket is in the constructor.
Socket s = new Socket("localhost", 501);I don't believe that there are any functions, such as:
s.setHost("localhost");
s.setPort(501);However, JavaDocs suggests that when you use the no-args constructor, your class becomes an automatic SocketImpl class, but you can't reach any of its variables unless you derive from the class, itself. But that's probably a bigger headache than it's worth.
Now TECHNICALY, if you didn't want to create a new variable, you could use:
Socket s = new Socket("localhost", 501);
s.close();
s = new Socket("remotehost", 502);
s.close();However, this is still creating a new instance and thus a new object in memory.
I hope this answers your question.
Let us know exactly what you're trying to do for a more exact answer.
~Derek

I use Exchange to sync my iphone4S with Outlook. On my iphone, my contacts are split into multiple records if they have more than one email address - how can I consolidate them on the iphone

i use Exchange to sync my iphone4S with Outlook. On my iphone, my contacts are split into multiple records if they have more than one email address - how can I consolidate them on the iphone

I have loaded my Firefox bookmarks into Internet Explorer Favorited. I also uninstalled Safari.
I go to iTunes on my phone and see no wat to connect my iPhone to my laptop. I see Music, Shows, etc., the kind of stuff I would expect, but no clue as to how to proceed.
Would you please be so kind to fill me in on how to "That syncing is done via iTunes. Connect the device to iTunes, select it, then go to the Summary page and select to sync bookmarks."?
I am not sure what you mean by "Summary Page"
Thank you

HT1719 Can more than one device access the same ITunes library?

Can more than one device acess the same ITunes library? And if so, does each device's list of songs remain separate and distinct for each device?

No problems whatsoever. I have 3 iPhones and 3 iPod touches with different IOS connected.

How can you set up more than one device on iTunes. I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices.

How can you set up more than one device on iTunes? I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices. I have all my music/videos on iTunes on my mac book pro. Can you set up separate folders for each device and drop in what ever music/videos from the main iTunes library?

In itunes it is called syncing and you can choose exactly what content to sync to all devices and it can be different for all of them
How to sync

HT1420 Can you have more than one device with a different Apple ID authourized to the same computer

Can you have more than one device with a different Apple ID authourized to the same computer

I think you are using the same Composition Class on both project. On the properties tab, you can change this number (e.g.: EDGE-1637270).

Airport disconnects when there's more than one device

I've got a really weird problem.. I have an Apple Airport Extreme 802.11n 3rd Generation. Software version 7.6 When more than one device connecrts to the base station it will disconnect everyone and then all devices will go into a connect/disconnect loops. Rapidly. This occurs only with wireless device. I watched the radar on my iPhone (5.1), Macbook running Snow Leopard, Macbook Air running Lion, and iPad 2 (5.1) blinking on and off, on and off. The only way to resolve this is to just have ONE person connect at a time.
Things I've tried:
1) Updating all software on all devices
2) Updating Airport firmware
3) Reboot and then restoring factory settings on the Airport when the reboot didn't work
4) Turning off encryption (WP2)
5) Making sure there are enough IP's for all the devices, turning off robustness, making sure the router is visible.
Because I know someone will ask this: The Airport sits atop a credenza in the open air. Nothing on, around, or above it. It's been in this position for months with no problem. It's not overly warm to the touch and I even used compressed air to blow out the vents (just in case) when this problem began.
I read once upon a time that the router gets a cache built up and that can cause these types of issues, but I have no idea how to delete said cache or even if it exists. It's just odd this only happens when more than one wireless device tried to connect to the network.
Thoughts?

I've resolved this! For some odd reason Apple won't let me denote this so I'm adding this reply. Turns out the problem was POWER related. The Airport was plugged into a power strip with several other devices. I unplugged all of those leaving just the Airport and the problem has not returned. If I add on all the devices, regardless of the power strip used, the problem returns. So it appears the Airport was just not getting enough power.
I've got it on a UPS now and the problem has not returned.

Can't connect more than one device.

I just bought an Airport Express 2 gen from a friend and I have two issues: I tried to reset it to factory settings and could not do it. Tried holding the reset button for 10 secs, unplugging and plugging back in while holding the reset button, holding the button for a longer time and nothing worked. I had no choice but to create another network. Once created, I can't connect more than one device. If I have my MacAir hooked up the network and I try to get my Ipad in, the minute I type the network pass in my Ipad, a screen pops up where I have to log in with my internet provider account. When I do that, it will connect, but my MacAir will disconnect automatically.
Appreciate any help!

Things are a bit different with the 2nd Gen AirPort Express and other newer AirPorts.
A Factory Default Reset is now the same as what was previously known as a "Hard Reset".
Power up the AirPort Express and let it run a few minutes.
Hold in the reset button on the Express for 10 seconds
Release the reset button and allow a full minute for the Express to restart to a slow, blinking amber light
If the Express is operating correctly, it will be back to factory default settings at this time.
If you try the reset a few times and the Express will not return to default settings, the Express is defective.

Why won't my Time Capsule allow me to connect more than one device to the network at a time?

Ok here is the shortest story I can come up with...
Several months ago lightening struck my house and ruined the power cord for my old AIR PORT EXTREME....after replacing the power cable my wireless network began to prohibit more than one device at a time to connect to the wireless network.
I replaced that network with a new TIME CAPSULE and it is doing the same thing. I took my old AirPort Extreme to my work and it works like a charm. My ISP says it is an Apple problem but I have had the same settings both at home and at work. Work is great, multiple devices connect but home is one at a time and in order to connect ANOTHER device I have to power down one, and reboot the router and fire up the device I wish to connect.
Any suggestions?

I am running off a Fiber line....the unit that is a battery back up and appears to be a modem as well is called CyberPower CS24U12V-NA3
Techincally, there is no "router" in my house, there is a LOCKED control box outside, a battery back up module in the garage that shows battery life and connection, then a cat5 outlet in my laundry room..All of which was installed by my ISP.
I am using a 2TB Time Capsule running DHCP in Bridge Mode. I can't find the software version but updated it while installing it within the last two months.
Under Network Tab
Enable NAT Port mapping is checked
Under the Wireless Tab
we have a 5ghz Network
Radio mode is set to: 802.11a/n-802.11b/g/n (Automatic)
2.4 GHz is Auto
5 Ghz is Auto
I hope this helps....

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Can I run my creative cloud for teams on more than one computer?

Can I run my creative cloud for teams on more than one computer?

Hi Nick,
We would like to inform you that you can install and activate the subscription on 2 machines, however, you cannot use both of them at the same time.
Kindly check the point 1.1 from the below mentioned link.
http://wwwimages.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-2015 0407_2200.pdf
Thanks,
Atul Saini

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards

Can rented movies be on more than one device at a time?

Can rented movies be on more than one device at a time?

No.
"You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time."
iTunes Store: Movie rental frequently asked questions (FAQ)

Can I split the output of my airport to more than one device?

Similar Messages

Maybe you are looking for