Can I start with an HTML template?

Hi, I'd like to buy a good HTML landing page template and load it into Adobe muse to make edits. Is this possible, or do I have to start from scratch or use some kind of proprietary Adobe Muse formatted file?

Hi,
You can't import HTML files or any other format files in Muse than .Muse files.
Regards,
Aish

Similar Messages

Flash Builder 4.5 can't start with Error 3

Flash Builder 4.5 can't start with error 3 occurred "Please uninstall and reinstall the product".
It is fine after those are done, but this problem occurred again and again after some days.
It is very annoying, please help!

For god's sake will anybody from Adobe say something about this?
I'm having the same issue and it's f***ing annoying.
"Please uninstall and reinstall the product" is not an acceptable error message.
Please provide a workaround.

My CS can't start with error code 16

How can I find the CS5.5 serial number under MAC OS X if I want to reinstall it? My CS can't start with error code 16, it says configuration error.

Please refer the KB Doc : http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error- cs5.html

Can you start with a jpeg?

My brother likes the functions on the camera raw panel and bridge.
He believes it will save him time over just photoshop.
Can he start with a jpeg image? If so, how does he activate the camera raw panel?
We have Bridge CS3 and Photoshop CS2. We have the Camera Raw 3.7 plugin.

If you REALLY are using Bridge CS3 with Photoshop CS2, I too would like to know how you are doing that. The capability to work with JPEG and TIFF images in Camera Raw was not introduced until Camera Raw 4.x, which is only compatible with Photoshop CS3.

TS4006 My phone will not turn on, therefore I have received a replacement phone but am wanting to reset my old device. It is not locating it because it says it is offline however I cannot turn it on at all. Can I start with my new device and not reset the

My phone will not turn on, therefore I have received a replacement phone but am wanting to reset my old device. It is not locating it because it says it is offline however I cannot turn it on at all. Can I start with my new device and not reset the old? Any help would be greatly appreciated. It's been a week without a phone

That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

Page numbering- How can I start with a specific Page #?

I'm using Pages 09 (snow leopard, and Pages on my iPad IOS 4.3.5) and I'm trying to get pages to start numbering using specific numbers. For example lets say I'm editing chapter 3 of a book which starts on page 84. Chapter 3 is its own document and always starts numbering with page 1. I know I could make one large document by pasting all the chapters into a single doc, but I hate working on such large documents. Editing single chapters at a time is easier to navigate.
Is there anyway to get the page numbering to do this? I've tried all the options in the page set up and nothing seems to work. Pages always start with 1 at the begining of a document.
Thanks in advance for any help!
Cheers!
David

In Pages on your Mac you used the inspectors for most functions. You can change starting page numbers in the section tab of the layout inspector.

Can't start with an audio track

In older iMovie versions I was able to import and audio track and lay still images and video clips on top of that. Now it seems like I need to start with video... when I simply drag an audio track into an empty clips window, it appears as a zero-seconds-long item. If what I want is to sync up images to a particular piece of music, what can I do?

I too presented the same topic earlier this year. In my world, the audio takes priority and syncing the visuals to fit. I copied this shortcut from my previous questions- hope it helps. I haven't made the jump yet to the Pro Software, but still on my wish list. If this shortcut doesn't work, SDMacUser was very helpful with explanations. http://discussions.apple.com/message.jspa?messageID=7824582#7824582

Imess can't start with cellphone number

I can't start or receive iMess by my cellphone numbers but before I could.

I too presented the same topic earlier this year. In my world, the audio takes priority and syncing the visuals to fit. I copied this shortcut from my previous questions- hope it helps. I haven't made the jump yet to the Pro Software, but still on my wish list. If this shortcut doesn't work, SDMacUser was very helpful with explanations. http://discussions.apple.com/message.jspa?messageID=7824582#7824582

9iasr2 infrastructure install - host name can not start with a digit?

Hi,
During the installation of the infrastructure the installer builds the database domain by using the host name. If the host name starts with the digit as in our case the installer fails with a blessing 'Database domain name should start with a letter'. How can we workaround the problem?
Thank you.
Anatoliy Smirnov

Chris,
Thank you for your reply. I looked at this thread before I posted my question, but I could not find an answer to what is wrong with this line in the hosts file:
10.0.0.80 7xpsm01.us.oracle.com 7xpsm01
or
10.0.0.80 7xpsm01 7xpsm01.us.oracle.com
If you know what the problem was in your case could you please let me know? Appreciate your time.
Thank you.
Anatoliy

How can one start with ECC6.0 ??

Hi Sap Gurus -
I am new to Sap , and would want to know how one can catch up with the technolgy. Ecc6.0 comes with BI7 and with other Sap applications integrated to it? am I right?? How can one have hands on practice with the Software so as to gain expertise?? Which Software shop can one get it for personal studies, not for anything enterprise? Thank you.. You can reach me on my email : [email protected]
regards,
Ekene

I'm not professional in J2MEDo you know java? if not, start by learning java.
If you are already proficient in java, start with the javadocs and exercises for j2me / midp available in plenty on the internet.
Happy coding, Darryl

Dispatcher can not start with Exitcode -2 WHY?

Hi all ,
My dispather in my J2ee server cann't start with the Exitcode -2 and the Errors following:
Error occurred during initialization of VM
Incompatible initial and maximum heap sizes specified
[Thr 7156] JLaunchIAbortJava: abort hook is called
[Thr 7156] **********************************************************************
ERROR => The Java VM aborted unexpectedly.
Please see SAP Note 943602 , section 'Java VM crashes'
for additional information and trouble shooting.
[Thr 7156] JLaunchCloseProgram: good bye (exitcode = -2)
(the jdk path in VM properties file is crrect)
Anybody know what's the problem?

Hi,
According to me its issue with Virtual memory sizing.
Idealyy it should be 8GB + RAM and again its depends on environment.
Also check the swap space on the system. How much swap size is free.
Reward the point if issue solved.
Regards,
Rohit Mehta

Can't start with Snow Leopard Time Machine backup in Lion

Hi,
I have seen coverage in MacWorld (http://www.macworld.com/article/161421/2011/07/migrate_time_machine_backup_to_ne w_mac_in_lion.html) of using my Snow Leopard Time Machine backup as the starting point for my Lion TM backup. This saves all my revision history of all my documents and makes them available in Lion. However, when I follow the steps given in the MacWorld article, I don't get the same set of dialog boxes and am never given the option to use a previous disk.
Any hints to getting this to work would be much appreciated.
-Eric

A whole lot about Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.
Pondini's Time Machine FAQ

Hyper-V VM can't start with VHD attached, error 0x80070422

Hi,
i'm in a big trouble with Hyper-V on a Windows 2008 R2 server. Hardware is a HP Proliant DL360 G7. Role are DC, Hyper-V (yes, i know it's not recommended), AV client is Kaspersky Endpoint Security 10.2, and everything was working fine for more than a year.
Here is the full story, with the first part of problem i resolved.
First part:
I had problems with HP NIC (nc382i) when trying to update drivers to last version, and with HP Network Config Utility. I updated NIC drivers, then reboot, and i had the BSOD on boot, even in safe mode. So i had a look to minidump with debbugger, to find
reasons, and it seems the ksecdd.sys driver was the culprit (cryptographic kernel driver), but didn't get why, unless Kasperksy had to to something with it...anyway, i was able to boot by using the last good know configuration, and then I
removed the virtual switch on Hyper-V, dissolve HP network team (4 NICS), update drivers, then HP NCU, then tried to add a new Hyper-V virtual switch, all of these of course with VM stopped, and with autostart disabled on host reboot. I had BSOD only in normal
mode, no more on safe mode, so i used again last good known configuration, removed Kaspersky Endpoint Security, HP team, and virtual swith, used all drivers which were old working versions, made again HP team, virtual switch, and everything went fine, at last!
Boot with no errors, network was up and usable, all services were fine. Maybe it isn't important, but the only thing i realised is that network takes long to be up on reboot...
Now, second part with actual problems: i tried to start VM in Hyper-V...and i had the famous errors:
Microsoft Emulated IDE Controller (Instance ID {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}): Failed to Power on with Error 'The service cannot be started, either because it is disabled
or because it has no enabled devices associated with it.' (0x80070422).
And events ID 12140, 12010 and 12030
No matter what VM i tried to boot, it won't. Even if i try to create a new one, same issue.
I had a look everywhere to find solutions, so i tried with no luck :
- Change registry key to let correct a timing issue with FSDepends.sys and with
VHDMP.sys ("Start" REG_DWORD at "0" instead of "3" in "HKLM\SYSTEM\CurrentControlSet\Services\FsDepends")
then reboot
- Verify all access to registry, files, etc. with procmon utility to find a security problem
- Uninstall ARCServer BrightStor Backup, clean in safe mode any trace of Kaspersky with
kavremover utility
- Reverse to old HP BIOS which i know is working on others servers with same configuration
- Verify again access to file and registry while trying to boot VM with
procmon utility
- Removed Hyper-v role, then after reboot, install all same HP drivers for NICs, HP NCU, which are working on others servers, then reinstall Hyper-V role, create new VM...
- Verified many times files integrity with sfc (online and offline...)
Finally, i was able to boot a VM, only if i remove attached VHD, and i use only a DVD on IDE Controller, for booting for example on a Windows Server ISO. If i use an SCSI Controller, even without a VHD attached to it, i have other error:
Microsoft Synthetic SCSI Controller (Instance ID {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}): Failed to Power on with Error 'Insufficient Memory' (0x8007000E).
So i think the problem is with kernel driver, vhdmp.sys, or something like
vdvroot.sys, but i don't know how to correct this, and i'm in a dead end...is someone know for example what means the
0x80070422 error ? How can i verify kernel driver integrity?...
Any suggestion will be greatly apreciated, thanks!

Hi,
That error occur often is the Unknown Device installed which was related to vhdparser, maybe the AV soft change the vhdparser.
Please try to changed the startup value for FsDependes from 3 to 0 and also uninstalled the Unknown Device which was related to vhdparser from device manager.
If you are using the pass-through disk please install the following hotfix:
"0x0000000A" Stop error on a Windows Server 2008 R2-based or Windows Server 2012-based Hyper-V server that has many pass-through disks
http://support.microsoft.com/kb/2776366/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Apache can't start with " error resolving localhost ..."

Hi,
I have Oracle 9.2.0.4 installed on a White Box Linux. This installation for some reason shows an Apache problem:
When I try to start Apache then I have an error message stating the following
"date and time [error] OPM: PRIV: error resolving host name localhost"
then a message saying that httpd could not be started.
This error is not added to the log file but displayed instead on the screen. Morever, files with names mm.*.sem and mm.*.mem are created in $ORACLE_HOME/Apache/Apache/logs.
When I try "ping localhost" on this machine I have no problem and the name is correctly resolved!
Can any one please tell me what could it be?

Michel -
Any time. That's quite odd. And has your /etc/hosts
file changed at all? Is the first line setup
correctly to only include localhost and
localhost.localdomain?Yes it is.
Are you calling apachctl from
$ORACLE_HOME/Apache/Apache/bin? Well, I copy the file to /etc/init.d and launch Apache from there at startup. The reason is that I have changed the ports on which Apaceh will listen to 80.
You said you could
ping localhost successfully, but have you been able
to ping the localhost by name?Yes. I did. Note please that the name of the machine is lx_26_100.
ping localhost
ping 127.0.0.1
ping lx_26_100
ping 10.26.1.100
All of that works fine!
Have you tried
changing the value of the ServerName parameter from
the localhost's name to its IP address?
Well I didn't try this. I'll try it. However, the error message doesn't speak about lx_26-100 but instead it speaks about localhost not beeing resolved.
By the way, what are the files mm.*.mem and mm.*.sem in the logs of Appache?
-shawnThanks Shawn.

On opening 2 browser Tabs are displayed doubling the infomation how can I start with only one browser Tab?

each time I access firefox 2 tabs are created each with the same information. To retrieve the information I must manually close the second tab else the info will not display properly. I am wondering is there something I can do to stop this from happening? It happens with direct open or from a link and if allready on a web page and open another via link 2 more Tabs are created it can become very crowded and hard to know which was first tab created. I do hope you understand what is happening and hopefully there is a cure. Thanking you Graham Rice

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Can I start with an HTML template?

Similar Messages

Maybe you are looking for