Can I still obtain a copy of mountain lion now that Mavericks is out?

Hi, I'm trying to install icloud on my wife's computer so it will sync pictures and contacts with her new iphone.  The computer is happy and stable running snow leopard (great program, I miss it.) But icloud doesn't run on snow leopard.  I went to the app store and snow leopard isn't there anymore.  I tried to download Mavericks and the store robot quickly told me that it can't be installed on her macbook, even though it seemed to me that it fit the system requirements. 
Maybe there's a way to get icloud running on computers at are using 10.6.8, but since icloud is built into the OS, I haven't be able to find one.  We just finished building a really nice contacts book on her computer and were getting ready to transfer to her phone prior to activating it, but we're stymied.
Any help would be appreciated.
Thanks!

If it won't install Mavericks, Mountain Lion won't run on it either.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
You might be able to install Lion.
  Lion

Similar Messages

  • Can we still download Mountain Lion now that Mavericks is out?

    Unfortunately, my Macbook is too old to install the Mavericks OS. Is there a way users like me still get Mountain Lion?

    You are wrong.
    To install Mountain Lion, you need one of these Macs:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    To install Mavericks, you need one of these Macs:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later),
    MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac Mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    Your MacBook Air (13-inch, Early 2008) is not able to run neither Mountain Lion or Mavericks. You could go as high as Lion. That's all.

  • Where to download OSX Mountain Lion (now that Mavericks is out)?

    I have a 2005 Macbook Pro Intel Core Duo running 10.7.5 and tried unsuccessfully to upgrade to Mavericks.  Because the Macbook is too old, Mavericks is not supported on it.
    So given that, I'd like to upgrade the Macbook to the last version of OSX Mountain Lion 10.8.  But can't find it in the App store any more.  Is there someplace to download and install this older version for older computers like mine?

    I called Apple Support Sales, 800-My-Apple, and their response was that while 10.9 Mavericks is free for download, those computers that cannot support 10.9, but are on 10.7.5 or earlier can PURCHASE 10.8 at $19.95.
    I found this unfair, given that newer Macs can upgrade for free, but older ones have to pay to get an older version of the SW.  It looks like either I come up with $19.95, get a new MacBook Pro, or just stay with 10.7.5.
    I don't think that this is good customer relations.

  • How can I get a copy of mountain lion for my mac book pro on which I already have mountain lion 10.8.2 installed

    I have a MacBookPro which came installed with Mountain  Lion10.8.2.
    My Mac Book pro does not boot, not even in safe mode. It boots in Recovery Mode, and I tried to reinstall it and it says downloading and it shows that it will take 258 hours. I cannot wait 258 hours, is there any other way
    2. My brother got me this Mac between December 2012 - January 2013 from Australia, I live in  India, How do I find out if I am in warranty. Can I call any number. I have an Apple ID with me which I just created and I have the serial number with me but I do not know the exact date of purchase.
    Where can I download or purchase a copy of Mountain Lion? is there any other site other than Apple?
    How good is Maverick, Can I upgrade from Mountain Lion 10.8.2 to Mavericks. The local service center did not bother to verify the warranty and told me to pay 2000 rupees. I thought the warranty to be worldwide, apparently not, any suggestions.
    If I have no warranty I would still want a DVD of Mountain Lion since I can do the install myself and do not need to pay 2000 for installation. There is no data to backup. I would really appreciate any help here.
    Regards

    You can go to the Apple online store and purcahse a copy of Mountain Lion.  This will give you a redemption code, which you can use to download Mountain Lion from the App Store.  Unfortuantely, I'm not aware of any other way to legally purchase it.  I have never seen Apple release Muontain Lion on DVD.
    In terms of Apple Service, they just need the serial number of the machine to check the purcahse date.  It is usually correct, to within a few weeks.  A quick Google search should give you the correct number to dial.
    I hope this helps.

  • HT5444 I would like to use a copy of Mountain Lion for development, but the store tells me I cannot download it because my MacBook 4,1 is not compatible! What can I do to download it?

    I would like to use a copy of Mountain Lion for development, but the store tells me I cannot download it because my MacBook 4,1 is not compatible! What can I do to download it?
    I have paid for it and all...

    You can't do anything. See:
    OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    Your computer does not meet the requirements to run Mountain Lion.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • Just bought an iMac. Since there is no DVD with the OS in the box, what am I supposed to do if I have a problem? Do I have to pay to  pay to get a copy of Mountain Lion? It's not that pricey but still when you pay such a price shouldn't it be included?

    I just bought an iMac. Since there is no DVD with the OS in the box, what am I supposed to do if I have a problem?
    Do I have to pay to get a copy of Mountain Lion? I know it's not that pricey but still when you pay such a price shouldn't it be included? Considering the fact that people who bought a computer a few months ago without Mountain Lion can download it for free, I think I should have the right to get a free copy too, no?

    If you have a problem and need to reinstall, you don't have to pay. 
    OS X Recovery restores your Mac with a few clicks.
    OS X: About OS X Recovery

  • How do I get a copy of the Mountain Lion OS that I can use to recover?

    How do I make a disc image of my Mac Mini HD that id bootable and has the operating system with all the programs, settings and data.  If I need to replace a defective hard drive it would be good to have an image on a USB flash drive to restore previous settings and the operating system -- Mountain Lion, 10.8.1.  I have been told that TimeMachine does not make a true disc image.  I want a "hard copy" of the operating system that does not require an internet connection.

    Unfortunately, the link for getting specific hardware versions has disappeared. So basically:
    Get yourself a spare hard drive freshly erased or with a freshly erased partition of around 8 GBs or more.
    Boot to your Recovery HD. Select Reinstall Lion from the main menu.
    From the beginning screen select your spare partition/drive as the target destination then begin the download.
    At the end of the download you will observe an Install button for you to click. Now this is important - as soon as that gadget appears you must abort the installation process. There are only two reliable ways to do this quickly: a. yank the cable for the drive from the computer; b. pull the power on the computer - shut it down quickly.
    This will result in your finding a folder on the drive that contains InstallESD.dmg that you can now use to create a bootable USB flash drive installer based on the special build for your model. Use it until the next public release of Lion appears or you move on to Mountain Lion.
    If you do not stop the download process immediately upon its completion you will end up with an installer that always boots to a non-functioning installation progress window instead of the normal main menu.
    Make Your Own Mountain/Lion Installer
    1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
    Double-click on the InstallESD.dmg file to mount it on your Desktop.
    Open Disk Utility.
    Select the USB flash drive from the left side list.
    Click on the Restore tab in the DU main window.
    Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
    Drag the mounted disc icon from the Desktop into the Source entry field.
    Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
    Note: The term Mountain/Lion used above means Lion or Mountain Lion.
    As an alternative to the above you can try using Lion DiskMaker 2.0 that automates the process.

  • Still haven't received code in email for free copy of Mountain Lion?

    after around 16 hours, i have not yet recieved the code in my email to claim my free copy of Mountain Lion.

    mitchwbb wrote:
    after around 16 hours, i have not yet recieved the code in my email to claim my free copy of Mountain Lion.
    Search before posting.  Your question has been asked and answred dozens of times already.  It can take up to 72 hours.

  • Why can a person buy and/or download Snow Leopard, Lion, and Mountain Lion but not Mavericks???

    I am running OS X Lion on a mid 2009 MacBook Pro with 4GB of ram and a 160GB HDD. I was going to download Mavericks from the app store but waited to long. Now that Yosemite is out Mavericks has disappeared from the app store. WHY? A person can buy and/or download Snow Leopard, Lion, and Mountain Lion but not Mavericks??? And the kicker is that it was FREE!!! I just wanted to load Mavericks on my MacBook Pro to see how it performs. If I could live with any slow downs or quirks, I'd leave it installed. If not, I'd roll my system back. Apple's policy of ramrodding unstable product down our throat is BS. I don't want to use Yosemite until it has become more stable!

    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.

  • Why can't brand new MacBookPro9,1 (OEM Mountain-Lion) boot from Snow Leopard on external drive, or internal partition?

    Why can't brand new MacBookPro9,1 (OEM Mountain-Lion) boot from Snow Leopard on external drive, or internal partition?
    Is this because of hardware changes? Or firmware changes? Or is it just and Apple Inc. administrative fiat?

    @Steve Holton: Sorry Steve, but you're wrong about that one . I'm using 10.8 (purchased and downloaded) on the internal HD of this MBP8,3 (2.2 GHz, 17"), and I am also able to boot into 10.7.4 and 10.6.8 from external FW800 partitions.
    However, I DO have problems with my MBP9,1. It came with 10.7.4 installed and ran fine. Then I purchased and installed 10.8. It ran fine but could no longer boot from 10.7.4 on an external partition. I then reinstalled 10.7.4 on the internal HD and discovered that it is still unable to boot (even 10.7.4) from an external FW800 partition.
    One of Apple's Senior Support Advisors has done some remote troubleshooting but the case is still open and unresolved. An earlier Apple Support case suggested that when, I installed the downloaded copy of 10.8, there had been a "firmware update" (behind the scenes) that is now causing the problems with booting from my external partition(s). This apparently is "a bug": it is not what is supposed to happen.
    So - I believe - "the problem" really has nothing to do with hardware capability. It is strictly about Apple's strategy for "managing its future customer base". If you don't like it - use something else - I am seriously considering Ubuntu as an alternative.
    If there's a hidden caveat in all this it's probably "Read Appple's Licence Agreement VERY Carefully".

  • How can I make a bootable disk for Mountain Lion?

    How can I make a bootable disk for Mountain Lion?

    Make Your Own Mountain/Lion Installer
    1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
    Double-click on the InstallESD.dmg file to mount it on your Desktop.
    Open Disk Utility.
    Select the USB flash drive from the left side list.
    Click on the Restore tab in the DU main window.
    Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
    Drag the mounted disc icon from the Desktop into the Source entry field.
    Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
    Note: The term Mountain/Lion used above means Lion or Mountain Lion.

  • I have a hdd from late 2009 that I upgraded from leopard to snow leopard to lion to mountain lion.  I want to upgrade the hdd to ssd.  Do I need to buy a new copy of mountain lion to install on the ssd?  If not, then what is the procedure to transfer?

    I have a hdd from a late 2009 mbp.  I upgraded from leopard to snow leopard to lion to mountain lion.  Now I want to upgrade to a ssd.  Do I need to purchase a new copy of mountain lion to go on my new ssd? If I don't, then what is the procedure to transfer mountain lion with my 4 user accounts onto the new ssd from the hdd?
    I'm confused on if I can use the recovery hd on a thumb drive to install mountain lion on my ssd.  Will it be pheasible with so many OS X upgrades?  And then how do I get my user accounts onto the ssd from the hdd.  Do I use migration assistant?  Do I need to make a time machine backup first?  Should I use something called Carbon Clone or something like that?
    Thanks for reading

    If you have a cable that connects and external HDD to the MBP, it will do.  If it is something like this, an  enclosure will not be needed for the swap:
    An enclosure allows you to use your old HDD for storage or backup purposes.  The cable will not. 
    Here are instructions as to how the swap can be performed using DISK UTITY.  Substitute You cable for the enclosure in same:
    INSTALLING A NEW HDD IN A MBP
    1. Make certain that you have backed up all of your important data.
    2. You will need a HDD enclosure.  One with a USB connection will do.  A 9 pin Firewire is better.
    3. Install your new drive in the enclosure and connect it to your MBP.
    4. Open DISK UTILITY>ERASE.  From the left hand column drag the new drive into the 'Name' field.  Make sure that the format is 'Mac OS Extended (Journaled)'.  Click on the 'Erase' button.
    5. Click on the 'Restore' button (on top).  Drag the old drive into the 'Source' field and the new drive into the 'Destination'  field.  Click on the 'Restore' button on the bottom right hand corner.
      Depending upon the amount of data you are transferring, this may take a couple hours or more.  A Firewire will speed up the transfer.  This will result in both drives having identical information on them.
    6. After the data transfer has completed, you may swap the drives.  Start the MBP and you have finished the installation.  The initial boot may take a bit longer than you are accustomed to, but that is normal.
    7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have.
    If there is any confusion on your part, post back.
    Ciao.

  • How many computers can be upgraded with one 1 purchase mountain lion?

    How many computers can be upgraded with one 1 purchase mountain lion?

    What if I have a Mac with a different apple ID. Can I sign out of that ID and sign in with my other ID and still download it with one purchase?

  • How do I partition my MacBook Pro so I can keep Snow Leopard and also install Mountain Lion?

    How do I partition my MacBook Pro so I can keep Snow Leopard and also install Mountain Lion?
    I want to install the latest OS, but I already know that I will lose a lot of my software unless I can partition the hard drive and have two "bootable" drives.
    How do I retain everything I have, partition the drive, then reloa the software I own according to which OS it will work under?

    msmedia wrote:
    I do not currently own OS X ML.
    I am currently running OS X (10.6.8 Snow Leopard) on my MacBook Pro. It has a 2.8GHz Intel Core 2 Duo Processor. I want to upgrade to Mountain Lion, but many of my software titles will not operate with ML and I cannot afford to replace some of them (Adobe Creative Suite, for e.g.)
    After I back-up my HD and then partition the HD, how do I use the back-up to reinstall what I want to the SL partition, and then place the rest on the ML partition.
    I have not done what you want to do, so can only offer some general thoughts in support. Take value from the following where you can. No guarantees.
    If it was me, I would use a disk clone utility (e.g. Carbon Copy Cloner) to image the existing Snow Leopard disk to an external drive. Then verify that the external drive would boot and run Snow Leopard normally.
    I would then purchase and download the Mountain Lion upgrade installer, but not run it. Use Lion Diskmaker to make a bootable USB stick, and perform a clean install of Mountain Lion, replacing the Snow Leopard on your MBP. This way, you make absolutely certain that no third-party drivers or other SL cruft remains to make Mountain Lion unstable. Update to latest ML point release. Fix permissions. Let TimeMachine make a full backup of your ML installation to a different external drive. Then turn of Time Machine.
    In Disk Utility, use the + sign at the bottom of the ML partition to add another GUID, HFS+ Journaled partition for Snow Leopard. Resize to taste. Name it differently from your ML partition. Exhale.
    Now ideally, you would like to reverse the external clone and put it back into the new SL partition. Then fix permissions. And demonstrate that you can boot into individually stable OS X installations. This would save you alot of work. Resist copying your home directory into ML just yet.
    If you cannot successfully achieve the preceding paragraph, you will be faced with a full SL and application reinstall.
    The ~/Library contents for SL and ML are sufficiently different that you do not want to mix them. You may want to salvage Safari bookmarks.plist. And, ML created folders in the home directory may have different permissions or ACL settings than in SL. So, my rule of thumb would be to copy folders that you created in SL, and only the contents of matching named OS created folders such as Music, Pictures, Downloads, etc.
    For each operating system, you probably want the Time Machine settings to exclude the opposite OS X partition. If you use the same host name in Sharing prefs, then you will mix SL and ML backups on the same Time Machine back up drive. If you use different host names, they will be distinct folders in the Time Machine backups.backupdb and allow discrete restores per host. You may also want to gag Spotlight from indexing the opposite OS X partition.

  • I want to move a bootable copy of Mountain Lion to an external HD before I upgrade to Maverics. How do I do this?

    I am preparing to upgrade to Mavericks.  I want to put a bootable copy of Mountain Lion on an external hard drive so that I may run apps that aren't yet compatible with Mavericks.  How do I do this?

    You will need an external HD and either SuperDuper or Carbon Copy Cloner. Both will create bootable clones of your of your system. One is not "better" than the other, to be honest it's simple user preference in the UI.  Once you have created your clone boot from it to test and once you have validated it works then you can download Mavericks and begin using it. You can Google for each app and download them, each cost approximately $40-$60.
    In the event you want to go back to ML the clone will provide that freedom. Or if you simply need to use ML to get to Apps that only run on that version of OS X then you can. I would recommend getting an EHD that has the fastest connection your computer has output for. For example if your machine has a  Thunderbolt connection, get a EHD that supports Thunderbolt.

Maybe you are looking for

  • Debugging Oracle JVM with Eclipse

    I installed Oracle10g personal edition on a Windows machine, and developed some Java stored procedures for it. It works nicely. However, I cannot figure out how and where to configure Oracle's JVM so that it would let me connect to it from Eclipse. A

  • Upload material and contract data from file in CCM 2.0

    Hi guys, This might be a difficult one! We have the following situation in a Client: We are upgrading a Requisitite catalog (working with BBP 2.0) to a CCM 2.0 catalog. In Requisite, one can upload material- and contract data from a file (it is stand

  • Cannot use Softproofing and cannot export to desktop

    I upgraded to LR5....but it won't export photos to my desktop...and softproofing doesn't work!!!   I used both on LR 4.  But I need help to fix this. Message was edited by: Brett N

  • Problem with text placement

    I have not a clue what is going on. The body of my text is ignoring all of the tables on the right. I have tried all I can think of. Does anyone have ideas as to what may be the issue? Thank you!!

  • Symbol in the address bar?

    If you look in the address bar right now, while reading this, you will see the adobe icon logo just before the "http" part. My question is simple. How do I place a symbol, that I have made, in the address bar for my website? Thanks.