Can I stop specific webpages apearing in address dropdown list when typing a webpage

That is just the full question there, Can I stop specific webpages apearing in address dropdown list when typing a address?

I believe I've figured this out. You probably don't have a virus and there may not be much you can do. What is probably happening here is that the DNS provided by your ISP is trapping the request and redirecting you to the teoma server (run by ask.com).
When you enter "flurdl" into the address bar, first the browser (& network stack) tries to resolve it as a host name into an ip address, by contacting the DNS server. If it resolves to an ip address, the connection proceeds. If DNS replies there is no such host, the browser passes it onto your search provider to perform a search.
Your ISP has cut a deal with teoma such that when there is no host, instead of returning that, they return the teoma address. Your browser connects to that address and teoma returns its search page. So your browser never realizes it needs to search; it thinks it hit a valid page.
Why do they do this? Because the search engine gets paid for the "preferred" entries in the search result.
Your options are probably twofold: 1) don't search from the address bar, use the search bar instead. 2) Find another more honest DNS provider and configure it explicitly in your network settings.

Similar Messages

  • How can i stop firefox from asking "Choose A Network Connection" when i'm offline and using my saved pages

    How can i stop Firefox from asking "Choose A Network Connection" when i'm offline and using my saved pages
    i use Firefox 22.0 on windows 7
    it's about one week that it ask for "Network Connections" when i'm offline and disconnected from the internet even when i don't open a save page and just opening Firefox with a blank page
    Image of the Error:
    http://home.sums.ac.ir/~rowshansh/firefox.png
    http://www.sums.ac.ir/~rowshansh/firefox.png

    Did you check the network setting?
    Sounds that you have set to connect automatically when a connection is not available.
    *http://kb.mozillazine.org/Autoconnect
    *http://kb.mozillazine.org/Browser_attempts_to_connect_when_already_connected

  • How can i stop my phone from vibrating in my ear when i am on the call?

    How can i stop my phone from vibrating in my ear when i am on the call? I usually keeps my phone on vibration mode so i get notified when there is a new mail or message? However, when i am on the call, then also, it vibrates in my ear everytime a mail comes. Very irritating. I use my business phone and mails keep coming every 2-5 mins.
    Please help.

    very impractical . specially when you call A LOT and receive notifications constantly!

  • How can I stop my Droid Razr-M from turning on when i plug in the charger?

    How can I stop my Droid Razr-M from turning on when i plug in the charger? I can turn it off and even wait a few minutes before plugging it in to the charger and it still turns on immediately when plugged in. If I turn it off after plugging in the charger, it turns back on right away too.

        I know its frustrating to have your phone powered on when dharger brazzco. Have you tried to to plug the phone into the charger then power the phone down? Are you u sing the wall charger or USB charger? Is the phone damaged? Keep us posted.
    KinquanaH_VZw
    Follow on Twitter @vzwsupport

  • How can I stop Firefox autofilling my email address when I log onto hotmail?

    How do I stop Firefox autofilling my email address when I log onto hotmail?

    Thanks Lawrence. I've spent over 3 hours on the phone/chatting to online support and none of it seemed to help as it all revolved around resetting emails etc but can't do any of it without my access to my old email. Now my phone won't take cloud because they advised to set up new apple ID and use that, but can't sign out of old one completely. Also doesn't help because my phone and laptop are set up on the old one. Thanks for the help.

  • How can I stop Firefox from opening (to "File Not Found") when opening my Opera browser?

    Ever since I installed Opera 10.61 on my new computer (Windows 7 Ultimate operating system), whenever I open Opera, Firefox opens one second later with the following error message:
    '''File not found '''
    Firefox can't find the file at /C:/Users/Nasheed/AppData/Local/Opera/Opera/temporary_downloads/client-en.xml.
    * Check the file name for capitalization or other typing errors.
    * Check to see if the file was moved, renamed or deleted.
    TRY AGAIN.
    <nowiki>****************************************************</nowiki><br />
    This happens EVERY TIME I OPEN THE OPERA BROWSER. How can I stop this from happening? I'm stumped.
    [EXTRA INFO - I was unable to enable Firefox to access my previous profile on the new computer (despite putting the old profile in the appropriate Mozilla Firefox folder. So, there are now two profiles in that location.
    After reading the answer to another forum member's question, I attempted to resolve the problem using Profile Manager, but I was unable to locate the Profile Manager. The Windows "Search" feature is not enabled on my new computer (nor can it be enabled from the Customize Start Menu options).]

    Thank you for your response, Cor-el.
    I had Opera set as my default browser since this began happening. I changed my default browser back to Firefox mainly because having Firefox open one or two seconds every time I open Opera was/is such a nuisance.
    I believe this problem began because I attempted to manually transfer the files from my old computer to the new one (via the backed up files in my external drive). I was unfamiliar with Windows 7 when I did this. Microsoft changed the file set up from what I had been used to in Windows XP. I used XP for six years before being exposed to Windows 7 (I never had Vista).
    I'm almost sure this problem has something to do with where I placed the application data when I was trying to reestablish the program set up on the new computer.

  • How can I stop my screen from going on and off when I play games ?

    HOw can I stop my screen from going on and off all the time when I touch it.

    Maybe it is a hardware problem, but you will not know that unless you start eliminating all possible software issues. Try this. Close all apps in the recents tray and reboot your iPad.
    Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Can't add text to photo. text doesn't appear when typeing.

    I can't add text to photo. The Horizontal Text Box appears but when typing there is no text seen. There is a cursor line which appears outside the text box.

    Please change the size of text and make it smaller.
    Regards,
    vaishali

  • How can I restore automatic display & selection of addresses of contacts when I type the first letter on my Yahoo addressee bar?

    When filling out the addressees (T0, Cc, and Bcc bars) on a new mail in Yahoo, I would type the first few letters of each addressee, and get a display of the names and e-mail addresses starting with those letters. I would simply highlight the ones I wanted to include, and these would be automatically placed on the corresponding bar. For some reason, this display/autotext is not functioning. So I now have to go to "Contacts" to look up addresses that I haven't memorized.

    Hi Silky-Milky!
    If I understand your question correctly, you are attempting to merge your contacts from your previous phone's backup into your iCloud account, then go back to using your new phone as normal, with the new merged database of contacts. I have an article that can tell you how to do exactly that:
    Recovering iCloud or MobileMe data from iTunes backups for an iOS device
    http://support.apple.com/kb/TS4108
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • How can I stop iOS from opening a recently received message when I click on the messages app to compose an unrelated message to a different contact? I want to read it later, when I have time to reply, and I don't want to forget to go back to it.

    iPhone messages automatically open when I don't want them to
    One of my first ever flip phones had a wonderful function where you could choose a checkbox next to received messages to make them appear read or unread. This was very convenient for messages which you read, but don't have time to reply to immediately, and want to remember to come back to later.
    In contrast, the latest, greatest iPhone not only does not have this rudimentary message management function, but it goes one step further in the wrong direction. If there is just one received, unread message, and you click on the messages icon, the new message will automatically be opened. It is opened irrespective of whether you have time to read it right away, irrespective of if you simply wanted to compose a new message or go back to another already read message. It just opens the new one, and then you are in a position where you have to read it and respond to it right there, or risk forgetting about it and failing to reply to it altogether. I sometimes receive a lot of messages over a period of a few hours, so it is very easy to lose track of these half-read messages in the mayhem. I have missed countless messages because of this problem. Incidentally, if there is more than one received message, then the application doesn't automatically open any of them, which is much better, because you can at least choose when you want to open one of the unread messages. But ideally, you should be able to go through your list of received messages and check or uncheck them as read or unread at any time, so that you can easily find messages that still need to be replied to, or reconsidered.
    Does anybody have a solution to this problem? It strikes me as a simple data management solution that should be, but is not an option in the basic functionality of the app. Frustrating!

    Is this an IMAP account?
    If so, delete the messages in Mail from all folders and quit Mail.
    Go the the website and clear the messages from all folders there.
    Reopen Mail and verify the messages have been deleted for all folders.

  • Can I stop a report from Re-executing the query when I go back to that page

    I have a report that has a complicated query and looks at a lot of information to display the results. This query then links of to show details of individual items that were displayed in the result. But when I hit the back button on the browser, it executes the query again and it takes a while for the page to load.
    Is there any way to stop this and only execute the query when the User pushes a Button on the page else display the previous results.
    Thanks
    Sriram

    Another alternative is to make that detail link open in a popup window using
    javascript:popupURL(...);This way, the complicated report page is always visible.

  • How can I stop iOS3 iPod Touch v1 apps being removed when iTunes updates apps with iOS4   apps

    I have an iPhone 4 with iOS5 whilst my old iPod Touch Mk1 still runs on iOS3. My old iPod now rests in the handbag of my wife who will use the installed apps if she is near a wifi she can use. There is however an increasing problem in that wheras it is more than capable whilst running the old apps iTunes is automatically upgrading them as new versions are released and increasingly upgraded apps only support iOS4 +. The obvious answer of buying a new iPod does not compute, its a good iPod and despite years of regular use the battery life is more than reasonable and the iPod function wit h16gb is more than adequate so I refuse to commit it to the silicon graveyard yet ( i still run old G3 and G4 macs as servers and have an old Classic that still provides amusement at parties).
    If however this automatic upgrade and trashing of old apps continues it will not be long before one day we sync the ipod and find it wipes al lthe apps off as they are no longer iOS3 compatible. Anyone ever found a way to protect the apps of an iOS3 device whislst all ipods are synced from the same iTunes user account?

    There really is not god way.  Whatyou migh consider it sonnecting the iPod to a different computer and transfering purchases to the computer.  That way yu will still have the version of the apps that are compatible with the iPod.
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    At a later date if necessary you can delete the newer apps from the library of the syncing computer and put the older ones in and do what you want to the iPod.

  • How can I stop all the messages in a thread opening when I only click on 1 of them?

    I click to open a mail and the others in the thread also open. I only want to open one at a time. [I'm new to Thunderbird, I used to use Outlook Express. ]

    re I click to open a mail and the others in the thread also open.
    when you select to read an email which is part of a thread:
    A single click on email will display it in the Message Pane below.
    A double click will open in a new tab or window if you have this up.
    A right click and select 'Open in conversation' will open a new tab showing all received and your sent responses in that thread as a list, which if you switch off the threading and choose sort by Date, will reorder the list.
    What do mean by open?
    Are you saying that several tabs or windows open all at once?
    OR
    Do you mean that you can see the email response in the Message Pane but below that email there is some more From,Sent, To, Subject headers and email content, which is what the sender was replying about.
    If yes, that's because the person 'Replied' or 'forwarded' the email, so that it is part of the email.

  • How can I stop my login screen changing to shrunken dimensions when I log out from my account, it does so randomly!

    Hi,
    Does anybody know how I might fix the followin:
    When I log out of my user account on my macbook the screen display has started to do weird stuff like change size so that the usual log in screen appears small and to the left, not filling the whole screen, then if someone else in the familiy logs in to their user they may have the same problem within their usual screen, with a small area instead of the full screen to work with. THe remaining screen displays blue, without the chosen wall paper etc. It seems to do this randomly so that logging in and out of accounts, shutting down and reopening can get things back to normal, but only until it goes weird again.
    Thank you for any help.
    Billie

    It sounds like a problem wih the backlight inverter. Usually they just go, instead of on and off.
    In a dark room hold a flashlight on the display when it blacks out. If you can see the items on the desktop, it's probably the backlight.

  • How can I stop iTunes downloading every podcast from the cloud when I only want unplayed podcasts to show in iTunes?

    When I set iTunes to automatically download all new episodes and only keep unplayed episodes, it downloads every episode in every one of my podcasts feeds. This means thousands of files, as not every XML feed hosts only a few files. Some host hundreds.
    How can I get rid of all these podcasts that I don't want to display? The old way was a superior user experience to the way it is now.

    My workaround for this is to set up a smart playlist. I hope this is another one of the issues that gets cleard up when Apple eventually releases an 11.1.1 update.

Maybe you are looking for

  • Cross Reference incorrect syntax

    Trying to create a partial text cross reference using the suggested code: <fullPara delim=":" includeDelim="false"/> However, InDesign (CC) is giving me an "Incorrect Syntax" message. Ideas? Thanks.

  • Getting error while starting the Weblogic server.

    Please find the error while i m trying to boot the weblogic: Dec 9, 2009 12:55:15 PM CST> <Notice> <Stdout> <000000> <Jolt Session Pool cannot provide a connection to the appsever. Thi s appears to be because there is no available application server

  • Unable to delete boot environment

    I installed SXDE207 into a vmware VM on my laptop. I then upgraded it to 907 using live upgrade: bash-3.00# lustatus Boot Environment           Is       Active Active    Can    Copy      Name                       Complete Now    On Reboot Delete Sta

  • Update table TVARV

    Hi, I am writing a small program to update tavle TVARV. I don't want to use UPDATE TVARV statement, is there any FM or Transaction I can use? Thanks.

  • Connecting a used iPhone with iTunes for the first time

    When i bought my 5s end of last year i switched it on coming out of the box, without connecting it to iTunes. I started making back-ups to iCloud. Now i want to connect it to iTunes to make a back-up, but iTunes thinks it's a new device and only prop