Can I stop the function of button SHIFT

HI every one
I want stop the function of button SHIFT in keyboard
how this in form?
another question
I want when I press F1 ==> save the form instead of F10
THANX ALOT

hi
For shift its not possible but for F1 its.
D:\DevSuiteHome_1\forms
open the following files in NotePad.And make a backup for u r files before changes.
Fmrpcweb.res
and
Fmrweb.res
sarah

Similar Messages

HT2907 How do you stop inadvertent contact with the touch screen? Why no Lock Button? Doesn't anyone work out at Apple?? MY Gen 7 also doesn't link to workout equipment automatically like my Gen 6 and I can't stop the bloody voiceover. Any thoughts?

How do you stop inadvertent contact with the touch screen? Why no Lock Button? Doesn't anyone work out at Apple?? MY Gen 7 also doesn't link to workout equipment automatically like my Gen 6 and I can't stop the bloody voiceover. Any thoughts?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I forgot my passcode, so I was unable to access my phone. I then tried to restore it, but it has frozen during the process. It won't connect to my mac again and I can't stop the process because my lock button is broken. What do I do?

I forgot my passcode, so I was unable to access my phone. I then tried to restore it, but it has frozen during the process. It won't connect to my mac again and I can't stop the process because my lock button is broken. What do I do?

My first advice is "Back up the device, then have it replaced." Second item of advice, "Don't forget your passcode."
One of the purposes of the lock button is to recover from certain software failures. Without the lock button, such a recovery is nearly impossible. My advice would have served you best when the malfuction first developed, not after you forgot your passcode.

How can I stop the alarm using fingerprint function

I set two alarm records in my 5s and i was aware. I use fingerprint to stop it but it didn't work and each alarm rang for 15 min. I couldn't stop it. How can i stop the alarm?

You can either snooze it, or slide to unlock to stop it.

Can I stop the install? Stuck in a reboot cycle

How can I stop the install process? It tells me my disk is damaged and to restart and repair, but when I restart it tries to install again....it's a never ending cycle. I'd rather keep the system I have than continue this mess. Command R, option command, shift at the chime.... None of these things work.

Did you boot from the DVD? Did you do this:
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

How can i stop the itunes update notification

how can i stop the itunes software update notification. I have alreaady unchecked the box to automatically check for updates.

Don't tap the install button.

I am making an iMovie (HD 6.0.3) using old photos. How can I stop the zoom in on some of the clips?

How can I stop the zoom in on some clips of old photos? I am using iMovie HD 6.0.3 I don't want to take it off of every picture.

Select the photo in your timeline you wish to change, then with Meda/Photo tab open, click the Show Photo Settings button.
In the new window that opens, uncheck Ken Burns Effect.
Matt

With the new version of numbers, 3.0, how can I stop the spread sheet from scrolling horizontally without reducing the size?

With the new version of numbers, 3.0, how can I stop the document from moving horizontally? When I scroll up or down I find it annoying that the document might shift to the left, and then I have to scroll it back to the right. The only way I've found to stop it from moving horizontally is by reducing the document down to about 50%, but then I can't read the document. I prefer having the document set at 125%, but then the bottom horizontal scroll bar shows up, and then the document can shift to the left if I'm not exact with my scrolling up or down.

Hi Nels,
Please update your profile. Numbers 3.0 will not run on Mountain Lion (10.8.x)
With the new version of numbers, 3.0
imac, Mac OS X (10.6.3)
iMac, OS X Mountain Lion (10.8.4)
Regards ,
Ian.

My iPhone won't turn on and my lock button is broken so I can't do the lock/home button restore, what do i do?

My Iphone isn't responding to anything, and I can't do the home/lock button restore becasue my lock button is broken and I've been using assistive touch. Any ideas as to how to turn it back on?

Try plugging it into the charger. Unfortunately, without a functioning sleep/wake button, it will be diffucult to do a number of troubleshooting steps. See if it will start that way. If not, you may need to leave it for a period to see if the battery will die out and then plugging it in may restart it. Otherwise, you will need to take the device to Apple to see about repair/replacement.

Can I stop the event to add an entry??

Can I stop the event to add an entry if this entry does not comply with a condition that I make?
I can catch th event to add an entry, but i want to stop it and i dont know how to do it?
anyone can help me ??
Thanks.

Hi,
Try the following...
1) In the Add button click in the before action TRUE part u check the condition and validate.
If ur condition is False..
then Exit sub
Else
MsgBox("Fill the required info corectly")
BubbleEvent = False
I wrote this code:
            If pVal.FormType = 134 And pVal.ItemUID = "1" And pVal.EventType =   SAPbouiCOM.BoEventTypes.et_CLICK And pVal.BeforeAction = True Then
                Dim o As Boolean = False
                If o = False Then
                    Exit Sub
                Else
                End If
            End If
where FormType = 134 is BusinessPartner. When add record I capture this event but added the IC to BBDD, otherwise would have to stop using the event et_FORM_DATA_ADD??
thanks.

Can I stop the continuous saving of Pages document?

Can I stop the continuous saving of Pages (iwork) document? I am currently working on a large Pages document - a school handbook that is topping 500mb due to the photographs. On a Macbook Pro I7 with SSD drive the continuous saving of the document when I do the slightest change is driving me to distraction - I have no idea what it would be like with non-SSD! It takes around 30 seconds each time I move a single photograph. Can I stop this versioning that Pages does?
Thanks

Your problem is not linked to versioning but to AutoSave.
Autosave try to save every change when we leave the app "unoccupied" for a short time and, if we don't, it force save on a regular basis. It's this feature which is at work in what you describe.
By default, Versions apply once an hour or when you force it pressing cmd + s so it's not it which is at work.
My own tip when I want to edit a large file is to rename it from azerty.pages into azerty.template.
This way, when I start a session upon this doc, I don't work on a document which was already saved once, I work on one which was never saved so, Autosave doesn't apply.
CAUTION: this feature is killed after the first save process.
Happily, there is an answer :
Use my script Save_As (thanks to FastScripts I gave it the shortcut cmd+shift+s) or use it encapsulated in a Service by Peggy.
This script trigger File > Duplicate
then File > Save…
This way it allow us to keep consecutive files storing the contents of our work in progress but the document upon which we work remains unsaved so free of AutoSave feature.
We retrieve what we were doing under 10.6.8.
To be able to work a more comfortable way, we will have to wait the delivery of the next upgrade which, I guess, will be iCloud aware which require deep changes in the app design so that it will be able to save the documents by small blocks as was explained during the late WWDC seminars.
Now, I will give a less technical advice :
I'm quite sure that on the long run, it would be better to replace your larges picture files by smaller ones fitting the true requirements. Inserting files with a rez greater than 300 dpis in the printed size is counterproductive. As you see, I add my vote to fruhulda's one. She was also perfectly right when she urged you to crop your pictures out of Pages. This one doesn't crop the pictures, it put a mask hiding what you wan't to drop.
It's fine to build quickly a draft of a document but for the final work, it's better to prepare the pictures with a dedicated application.
Yvan KOENIG (VALLAURIS, France) jeudi 17 novembre 2011 21:03:46
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How can I stop the auto-saving of Pages version 4.1?

How can I stop the auto-saving of Pages version 4.1?

Why not just open your eyes !
Under 10.6.8, we had two menu items :
Save and Save As…
Now we have a single Save…
Since the first delivery of the macintosh,
a menu item whose name ends with ellipsis is one which always open a dialog.
Under 10.6.8 and older the Save button was used to save and already saved document without opening a dialog.
If the document was never saved, it behaved as the Save As… one.
With Lion the Save feature : save an already saved once document is no longer required as the system autosaved everything.
There was no reason to keep this aspect of the Save item.
Remaining tasks are those which were dedicated to the Save As… button.
The engineers choose to drop one op the now duplicating items.
The synthesis is the Save… item which clearly state what it is supposed to achieve.
Triggering it, we may :
change the name used to save
change the destination folder
export as .doc
export as Pages '08
Of course there is always the black triangle allowing us to use the stripped dialog or the full one.
Yvan KOENIG (VALLAURIS, France) mardi 26 juillet 2011 12:15:06
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How can I stop the...(icons?)..and .firefox ball from bouncing all around the Start Page?? It's VERY ANNOYING. frustrated dino

How can I stop the little pictures (icons??) and the firefox ball from bouncing all around the middle of the start page, which is my home page (?) It's VERY ANNOYING and DISTRACTING!

If you prefer not to see snippets on the about:home page then you can set the browser.aboutHomeSnippets.updateUrl pref to an empty string on the about:config page.
Delete the storage\moz-safe-about+home folder in the Firefox profile folder with Firefox closed to remove snippets stored in IndexedDB and make Firefox use a default set.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
You can reset the browser.aboutHomeSnippets.updateUrl pref to the default value to re-enable the snippets.

How can i stop the upgrade message appearing everytime i open iphoto?

How can i stop the upgrade message appearing everytime i open iphoto?
It's getting ridiculous that every time i open iphoto that it insists in being upgraded and repaired. Anyone know how i can get rid of this without reinstalling it?
Thanks

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I can't stop the voice control

I can't stop the voice control in my iphone 4.
What I can do????

Maybe you have mistaken, it's VoiceOver?
If so, press the Home button quickly three times to turn VoiceOver off

Can I stop the function of button SHIFT

Similar Messages

Maybe you are looking for