Can I stop the same Mail returning after deleting ?

I acn't seem to stop the same mail returning time after time. There are about 10 items of various previous dates that cme back from 'MAIL DELIVERY SYSTEM' - Delivery Status Notification (failure)...
I have tried, Bouncing, deleting and marking it JUNK but they reappear in my INBOX almost immediately.
I have also noticed that recently I am having to Force Quit MAIL very much more often.
Any one have any ideas, please ?

Hi loons,
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.

Similar Messages

My email keeps loading the same emails even after deleting them. They keep coming back everytime I start up the mail app. What can I do?

My email keeps loading the same emails even after deleting them. They keep coming back everytime I start up the mail app. What can I do?

After you delete them, empty the trash before they re-load.

Junk mail returns after deleting the item in the "Junk mailbox" and "Trash". Is there a way to permanently block the sender?

Junk mail returns after deleting the item in the "Junk mailbox" and "Trash". Is there a way to permanently block the sender?
I have deleted the item multiple times both on my Mac mini and my touch and 5 minutes later it is back in my Junk mailbox. The item will not return to the Junk mailbox until it is deleted from the trash.

You can create a Rule
http://email.about.com/od/macosxmailtips/qt/How_to_Block_a_Sender_in_Mac_OS_X_Ma il.htm

RE: Can I stop the "Attempting to Rebind" after EnvMgr goesAWOL ...

You might want to export the Environment definition and
use it to restore the Environment when you restart( after the
environment manager dies ungracefully ).
Ajith Kallambella. M
Forte Systems Engineer,
International Business Corporation
-----Original Message-----
From: Haben, Dirk [mailto:[email protected]]
Sent: Tuesday, December 29, 1998 1:47 AM
To: 'Soapbox Forte Users'
Subject: Can I stop the "Attempting to Rebind" after EnvMgr goes AWOL
Hi All.
In the last few weeks I have had the Environment Manager (for development)
go AWOL in as many weeks.
During a restart - after cleaning up (stop/id) all other Forte processes - I
run into virtual memory limitations - and the restart fails.
A larger virtual memory quota (doubling the pagefile quota actually) did the
trick.
However the quota is too large to be kept and I have reverted to 400,000
blocks (OpenVMS talk for about 200MB).
The problem appears to be caused by all this attempted rebinding.
"With Forte Release 3, this rebinding process is asynchronous" (see
TN11537).
Q: Can I disable the attempted rebind so to reduce memory needs on a restart
after the EnvMgr goes AWOL?
Supplementary Q: If so - How?
TIA and Seasons Greetings,
Dirk
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi,
We usually do a shutdown on the topmost level using escript. I assume that
will shutdown all installed partitions and the environment. Or did I get it
wrong that we have to shutdown application first that the environment?
Regards,
Peter Sham.
-----Original Message-----
From: Daniel Nguyen [SMTP:[email protected]]
Sent: Tuesday, January 05, 1999 6:38 PM
To: Peter Sham (HTHK - Assistant Manager - Software Development,
IITB)
Cc: [email protected]
Subject: Re: Can I stop the "Attempting to Rebind" after
EnvMgr goes AWOL ...
Hi,
Sorry, I don't have that kind of problem. Are you doing your
shutdown
on the application level from EConsole ? Do you shutdown your
application
before shutting down the environment ? Do you have the same symptom
after
having rebuilt your environment repository ?
The best I could say is still to make an export of the environment
on
your exploitation procedures (every day for instance) and to restart
your environment from this export. I presume that you still have
referenced
links in your environment repository which are not available. Until
you
make a clean Environement repository from an edf file you may have
the
problem.
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
Peter Sham (HTHK - Assistant Manager - Software Development, IITB)
wrote:
>
> Hi,
>
> The problem that I described happened not only after crashes but
also after
> clean shutdown. Observe your <hostname>.log and you will find
that each
> time after startup, there is a large chunk of message saying
"rebinding".
> When system crashes, this rebinding will disturb normally
operation too.
>
> Regards,
> Peter Sham.
>
> -----Original Message-----
> From: Daniel Nguyen [SMTP:[email protected]]
> Sent: Monday, January 04, 1999 8:58 PM
> To: Haben, Dirk; [email protected]
> Subject: Re: Can I stop the "Attempting to Rebind"
after
> EnvMgr goes AWOL ...
>
> Hi,
>
> The restart of your application is not exactly the problem
> the rebind is linked to the restart of your environment.
> If you want your application to restart, you should use
the
> autostart. Problem : if you are using load balancing, you
should
> restart
> as Degraded (with only one replicate). But, the main
problem seams
> to
> be your application. The partitions should not fall. You
may have
> some
> classes or attributes which are used but not instanciated.
This
> should
> causes a segmentation error and a crash of your partition.
This
> symptom
> is not the same if you are running on interpreted mode
(you will
> only
> receive a NIL object Usage Exception). Be aware that, on
the
> developement
> workshop, Arrays are instanciated automatically. This is
not true if
> you
> are distributed.
> On the application I worked on, this caused 150 autostarts
a day
> before
> resolution and an increase of the environment repository
up to 6 Mo.
> To avoid the crash of your environment, you should use -fm
to
> reserve
> enough memory (we used 60 Mo of memory for a standard
environment).
> You should not use the same environement for production
and
> compilation
> which needs much more memory if you use auto-compile, or
make your
> compilations with FCompile directly on the compilation
server.
> Normally the application (if it's already startded) should
not need
> the
> environment. You can stop the environment, your
application should
> still
> run, but new clients should not be able to attach to
partitions. It
> is
> a way to be sure that no new clients are connecting to the
> application,
> if you can be sure that all the proxies are already
resolved.
> The rebind is made to reconnect the environment to clients
and
> partitions,
> but I didn't see a real difference on instruments using
rebind or
> not.
> Rebind success is when your partitions or clients are
still there
> (with
> the same UUID). On a shutdown, your server partitions are
rebuilt,
> so
> it should not be successfull. Same case if the clients
stop their
> client partition.
>
> Hope this helps,
>
> Daniel Nguyen
> Freelance Forte Consultant
>
> Haben, Dirk wrote:
> >
> > I agree with Peter.
> >
> > My reason to stop the rebind in the first place is to be
able to
> have my
> > weekends etc to myself - so the application must restart
without
> manual
> > interference!
> >
> > Has anyone ever seen a rebind succeed? Was it worth it?
> >
> > Cheers,
> > Dirk
> >
> > -----Original Message-----
> > From: Peter Sham (HTHK - Assistant Manager - Software
Development,
> IITB)
> > [mailto:[email protected]]
> > Sent: Monday, 4 January 1999 11:09
> > To: Kallambella, Ajith; 'Haben, Dirk'
> > Cc: 'Forte'
> > Subject: RE: Can I stop the "Attempting to Rebind" after
EnvMgr
> goes
> > AWOL ...
> >
> > Hi,
> >
> > By restoring the environment from export will clean up
and skip
> any
> > "rebind". However, I would query that ... Is it
feasible in an
> production
> > environment. When the system is down, we have to put it
back
> asap.
> > Restoring the environment takes time and, I would say,
quite
> risky. Any
> > installation to the production has to be accompanied by
an export,
> > otherwise, after re-installing the export, the
deployment would be
> lost.
> >
> > I just wonder if there is a better way.
> >
> > Regards,
> > Peter Sham.
> > -----Original Message-----
> > From: Kallambella, Ajith
> [SMTP:[email protected]]
> > Sent: Tuesday, December 29, 1998 10:11 PM
> > To: 'Haben, Dirk'
> > Cc: 'Forte'
> > Subject: RE: Can I stop the "Attempting
to Rebind"
> after
> > EnvMgr goes AWOL ...
> >
> > You might want to export the Environment
definition and
> > use it to restore the Environment when you
restart( after
> the
> > environment manager dies ungracefully ).
> >
> > Ajith Kallambella. M
> > Forte Systems Engineer,
> > International Business Corporation
> >
> > -----Original Message-----
> > From: Haben, Dirk
[mailto:[email protected]]
> > Sent: Tuesday, December 29, 1998 1:47 AM
> > To: 'Soapbox Forte Users'
> > Subject: Can I stop the "Attempting to Rebind"
after
> EnvMgr goes
> > AWOL
> > ...
> >
> > Hi All.
> >
> > In the last few weeks I have had the Environment
Manager
> (for
> > development)
> > go AWOL in as many weeks.
> > During a restart - after cleaning up (stop/id)
all other
> Forte
> > processes - I
> > run into virtual memory limitations - and the
restart
> fails.
> >
> > A larger virtual memory quota (doubling the
pagefile quota
> actually)
> > did the
> > trick.
> > However the quota is too large to be kept and I
have
> reverted to
> > 400,000
> > blocks (OpenVMS talk for about 200MB).
> >
> > The problem appears to be caused by all this
attempted
> rebinding.
> > "With Forte Release 3, this rebinding process is
> asynchronous" (see
> > TN11537).
> >
> > Q: Can I disable the attempted rebind so to
reduce memory
> needs on a
> > restart
> > after the EnvMgr goes AWOL?
> >
> > Supplementary Q: If so - How?
> >
> > TIA and Seasons Greetings,
> > Dirk
> >
> > -
> > To unsubscribe, email '[email protected]'
with
> > 'unsubscribe forte-users' as the body of the
message.
> > Searchable thread archive
> > <URL:http://pinehurst.sageit.com/listarchive/>
> > -
> > To unsubscribe, email '[email protected]'
with
> > 'unsubscribe forte-users' as the body of the
message.
> > Searchable thread archive
> > <URL:http://pinehurst.sageit.com/listarchive/>
> > -
> > To unsubscribe, email '[email protected]' with
> > 'unsubscribe forte-users' as the body of the message.
> > Searchable thread archive
> <URL:http://pinehurst.sageit.com/listarchive/>
>
> -
> To unsubscribe, email '[email protected]' with
> 'unsubscribe forte-users' as the body of the message.
> Searchable thread archive
> <URL:http://pinehurst.sageit.com/listarchive/>
> -
> To unsubscribe, email '[email protected]' with
> 'unsubscribe forte-users' as the body of the message.
> Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

My mac mail on just keeps sending the same messages even after deleted and shows thousands of emails supposed to be coming in

My mac mail on just keeps sending the same messages even after deleted and shows thousands of emails supposed to be coming in

If you have a backup, you can restore the e-mails. Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Library/Mail/V2.
Thanks to leonie for some information contained in this.

I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?

I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?

for starters this is not the forum for notebooks or for that matter icloud or iphone.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
http://www.apple.com/support/iphone

How can I stop emails. From returning after there removed from trash?

How can I stop emails from returning after deleted and also deleted from trash?

Aside from force-quitting the Finder, I've never seen anything that allows for getting rid of the delay.

[Fwd: Re: Can I stop the "Attempting to Rebind" after EnvMgrgoes AWOL .

Hi,
You can, but it is not an option or a flag.
You should make an export of your environment on
your exploitation process. You will save your nodes
definitions and applications.
When you restart your environment use the export file to
rebuild the environment. Side effect : it will be clean
too.
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
Haben, Dirk wrote:
>
Hi All.
In the last few weeks I have had the Environment Manager (for development)
go AWOL in as many weeks.
During a restart - after cleaning up (stop/id) all other Forte processes - I
run into virtual memory limitations - and the restart fails.
A larger virtual memory quota (doubling the pagefile quota actually) did the
trick.
However the quota is too large to be kept and I have reverted to 400,000
blocks (OpenVMS talk for about 200MB).
The problem appears to be caused by all this attempted rebinding.
"With Forte Release 3, this rebinding process is asynchronous" (see
TN11537).
Q: Can I disable the attempted rebind so to reduce memory needs on a restart
after the EnvMgr goes AWOL?
Supplementary Q: If so - How?
TIA and Seasons Greetings,
Dirk
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi,
You can, but it is not an option or a flag.
You should make an export of your environment on
your exploitation process. You will save your nodes
definitions and applications.
When you restart your environment use the export file to
rebuild the environment. Side effect : it will be clean
too.
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
Haben, Dirk wrote:
>
Hi All.
In the last few weeks I have had the Environment Manager (for development)
go AWOL in as many weeks.
During a restart - after cleaning up (stop/id) all other Forte processes - I
run into virtual memory limitations - and the restart fails.
A larger virtual memory quota (doubling the pagefile quota actually) did the
trick.
However the quota is too large to be kept and I have reverted to 400,000
blocks (OpenVMS talk for about 200MB).
The problem appears to be caused by all this attempted rebinding.
"With Forte Release 3, this rebinding process is asynchronous" (see
TN11537).
Q: Can I disable the attempted rebind so to reduce memory needs on a restart
after the EnvMgr goes AWOL?
Supplementary Q: If so - How?
TIA and Seasons Greetings,
Dirk
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Can I stop the "Attempting to Rebind" after EnvMgr goes AWOL...

Hi All.
In the last few weeks I have had the Environment Manager (for development)
go AWOL in as many weeks.
During a restart - after cleaning up (stop/id) all other Forte processes - I
run into virtual memory limitations - and the restart fails.
A larger virtual memory quota (doubling the pagefile quota actually) did the
trick.
However the quota is too large to be kept and I have reverted to 400,000
blocks (OpenVMS talk for about 200MB).
The problem appears to be caused by all this attempted rebinding.
"With Forte Release 3, this rebinding process is asynchronous" (see
TN11537).
Q: Can I disable the attempted rebind so to reduce memory needs on a restart
after the EnvMgr goes AWOL?
Supplementary Q: If so - How?
TIA and Seasons Greetings,
Dirk
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi All.
In the last few weeks I have had the Environment Manager (for development)
go AWOL in as many weeks.
During a restart - after cleaning up (stop/id) all other Forte processes - I
run into virtual memory limitations - and the restart fails.
A larger virtual memory quota (doubling the pagefile quota actually) did the
trick.
However the quota is too large to be kept and I have reverted to 400,000
blocks (OpenVMS talk for about 200MB).
The problem appears to be caused by all this attempted rebinding.
"With Forte Release 3, this rebinding process is asynchronous" (see
TN11537).
Q: Can I disable the attempted rebind so to reduce memory needs on a restart
after the EnvMgr goes AWOL?
Supplementary Q: If so - How?
TIA and Seasons Greetings,
Dirk
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

How can i stop the same 800 emails from coming back? Each time a new one comes in, the same 800 re appear, I've deleted them so many times already.

Every time I get a new email, I get about 800+older ones with it. I delete them, get a new email and the same 800 keep coming back. Ran a MAC Boost which said i had 76 issues-37 being malwares but it didn't fix the email problem. Help?

Howdy Robert
I'll tell ys where MacBoost was found (I blew right by it since all it did was "report" according to the OP) = softonic, cnet, etc. - or its creator
www.toolwiz.com/en/products/toolwiz-mac-boost/
"Toolwiz Mac Boost. Most effective boost solutions & Extreme easy to use. One click to clean up your entire Mac. Empty all of trashes on your Mac"
The deluge of the 800 must not be a big problem as OP posted and hasn't returned
permettent de bons temps rouler
ÇÇÇ

How can I stop the shared mode service after install a single instance DB ?

Hello
I installed a single instance DB and don't use the dispatcher ,
is there a way to stop the service as below?
Oracle Version: 11g R2
OS: Linux
Service "o11g2XDB.oracle.com" has 1 instance(s).
Instance "o11g2", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: CentOS53.test.smtp, pid: 3061>
(ADDRESS=(PROTOCOL=tcp)(HOST=CentOS53.test.smtp)(PORT=40218))
The command completed successfully

And this is listener.ora
# listener.ora Network Configuration File: /u01/oracle/app/product/11.2.0/dbhome_1/network
/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = CentOS53.test.smtp)(PORT = 1521))
ADR_BASE_LISTENER = /u01/oracle/app
I didn't configure it, so it should be a dynamic bind .

Thunderbird keeps downloading the same messages even after deleting from trash folder

Also get this message no when emailing one of my groups " is not a valid e-mail address because it is not of the form user@host. You must correct it before sending the e-mail."

Hello, could you please provide the following information?
* What type of email account is it (IMAP or POP)?
* Who is the email provider (GMail, other webmail, self-hosted..)?
Please consider creating a new thread about the groups email issue. Having one thread per question makes it easier to answer, read and search for them.
Doing so will also allow the Mozilla volunteers to give you solutions that are more helpful to you. This may help them to solve your problem faster and more efficiently.
Thank you!

Can I use the same Mail configuration on more than one mac?

I have many (15+) email accounts. I'd like to duplicate the accounts and signatures that I use on my desktop computer onto my laptop. Is this possible? What files do I copy?

Triple-click anywhere in the line below on this page to select it:
~/Library/Mail
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Copy the selected item to the other Mac.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

How can I access the same table within AFTER UPDATE trigger? mutating

I'm trying to have processing done within a before or after update trigger.
reduced what I want to do down to a select within the trigger.
create or replace TRIGGER "AU_TABLE_A"
after update on "TABLE_A"
for each row
declare
l_res_status NUMBER:=0;
l_count NUMBER:=0;
begin
SELECT COUNT(*) INTO l_count
FROM TABLE_A
WHERE ID = :NEW.ID AND STATUS_ID = 9;
end;
Error in mru internal routine: ORA-20001: Error in MRU: row= 1,
     ORA-04091: table TABLE_A is mutating, trigger/function may not see it
     ORA-06512: at "BHRS.BU_MR_RES_APPR", line 13
     ORA-04088: error during execution of trigger 'BHRS.BU_MR_RES_APPR',
     update TABLE_A set "ID" = :b1, "STATUS_ID" = :b2, "COMMENTS" = :b3
     where "ID" = :p_pk_col
IS THERE A WAY AROUND IT?
Thank you, Bill

The very common approach to workaround mutating table problem is passing the table state through the package variables. I.e. - you create a package with one global variable ( say l_count). Then you need
1) a trigger before update for statement - here you counts your rows and set the package variable accordingly.
2) a trigger after update for each row - here you read the rowcount from a package variable and do your actual work
3) a trigger after update for statement - here you reset your package variable.
This approach uses the fact, that mutating table problem occurs only with triggers for each row and the order of execution of different trigger types.
However, counting records in every update statement (whereas not so worse although as doing this for each row within an update) may consume a lot of resources, so, possibly , you can rethink your business needs/approach.
Best regards
Maxim

PSE remains active in background after exit. How can I stop the program completely?

PSE remains active in background after exit. How can I stop the program completely?
Is there any command line option to force PSE to stop completely after exiting the GUI?
Opening the Windows Task Manager and killing the PSE process is not a solution!
(Context: I want to start PhotoshopElementsEditor.exe from another program with an image filename as command line argument. This other program waits in background until PhotoshopElementsEditor.exe has finished and pops up again after that. Since PhotoshopElementsEditor.exe continues to run silently in background, the other program will never come back.)

Hi - having the same problem with PSE process not ending on exit. Have you had any luck in resolving the issue?
Any advice would be appreciated. TIA

Can I stop the same Mail returning after deleting ?

Similar Messages

Maybe you are looking for