Can I store Movie files and other data on my Zen Xt

My PC HD is full of movie files and I want to free up some space. Can I move these files onto my 60GB Zen Xtra?

When transfering large files with the MTP firmware make sure you have the patch from Microsoft otherwise the file will not transfer back from the player to the computer.
Get it here:
<a href='http://support.microsoft.com/default.aspx?scid=kb;en-us;89536' target=_blank>http://support.microsoft.com/default.aspx?scid=kb;en-us;89536[/url]

Similar Messages

Lightroom crashing during 'move file' and other processor-intensive operations

Hi Everyone
I've been using various versions of Lightroom on my Mac for many years without issue. I love the program. Recently though, when using the last iteration of Lightroom 3 I began to experience problems when performaning processor-intensive work. For example, my library has nearly 200K images, and these are organized into hundreds of folders (bird species), each folder containing from 1 to up to 14K images. My workflow is to bring in the photos, rename them, and then shift them over into these species folders. For me it's an easier and faster way to get my hands on specific images than using tags. In any case, when I try to move images between folders lately, Lightroom slows down and eventually crashes. It also crashes the other apps running on my Mac at the time (usually just a web browser). I get the gray screen of death and have to reboot the Mac. Start over and after a few minutes of work it happens again.
Today I upgraded to Lightroom 4.3 hoping that might solve the problem, but I experienced the same crash behavior tonight while shifting some photos around. The Mac is a Macbook pro, recent model with latest OS and with 16GB RAM. I don't experience problems like this with any other application, but Lightroom is now bringing my computer to its knees! I even took the Mac into the Apple store and had the full diagnostics run and they found no problems internally. I keep my photos on external drives connected by firewire. Another potential wrinkle: Lightroom doesn't seem to be able to find a few of my previously imported images even though the directory is looking for them in the right folder. I get a "File offline or missing" issue. I tried pointing the folder to a new location (the same one) but that didn't work. Oddly, it does seem to find others.
In any case, any help here would be much appreciated. I have a feeling that my catalog might be corrupted and may be causing these problems, but I'm uncertain how to tell.
Thanks
Brian

You seem to have enough resources in your MacBook Pro to run Lr smoothly. Your catalog is not corrupted, or Lr would not open it.
When was the last time you ran <Optimize catalog> (>File >Optimize Catalog)? When was the last time you made a catalog backup from within Lr (your Mac backups don't count here). From within Lr because optimization of the catalog and of the previews is part of the backup from within Lr while your Mac backup doesn't optimize anything - it just copies.
The problems you are experiencing might also be caused by a drive that is nearly full, i.e. 80% or more. Usually the free space is not one big "empty stretch" but is distributed in small chunks. So when you try to move lots of images "in one fell swoop", Lr has trouble finding space to "park" images (a) for the moment, and (b) permanently.
Since you seem to move your images often, your drive might also be highly fragmented - although - if I remember correctly - defragmentation is not necessary on a Mac.
Finally, moving images between folders is not one of the strengths of Lr. It is known that - during a move - Lr sometimes "drops" images, i.e. they disappear from the computer to be never seen again. Also, Lr might loose the link to the image, indicate that the file is missing, and when you try to re-link them it says that this file is referenced with another image. You say that this is happening to you.
Therefore I would strongly recommend that you change your image organization to a workflow that is more conducive to Lr, i.e. organization by keywords and Collections.
You still can have folders, but constantly moving images between folders is not a good practice - as you are experiencing now.
And, the fact that you find it necessary to shift images between folders indicates clearly that organization by folders is not satisfactory. The reason is: an image can only be in one (1) folder (either in the petrel folder or in the shearwater folder) - but an image can have multiple keywords and can be in multiple collections.

I have uploaded files in the cloud but they do not seem to open. (Movie files and other content)

I uploaded content to the cloud without any problems or issues. (GREAT NEWS!) However the content appears as a gray box and does not open or do anything when you click on it. Can you help me? It looks like it uploaded completely but I am not sure how to access it or get it to open.
Thanks!
Cory

Hi David,
Thanks for responding! Yes they are files I created in Articulate and
MSWMM- Microsoft Movie files. I still have both but was basically thinking
when I sent the link they could log in and see the file. It looks like they
would actually have to download it to open and view the materials. Is that
correct? Is there some other way to share the content?
Thanks again!
Cory

HT201442 restoring and other data

why can't I restore my iphone? My "other" data is taking up 5GB of my 6.34 capacity storage. Have erased all photos, videos, apps and music. when i try to restore I get a message that: could not restore, the device isn't eligible for the requested build. Anyone have any suggestions to: a) get the other data off my phone, b) restore phone?!!??!
Any advice appreciated.

Like every other operating system, iOS stores temporary files and app caches locally on the iPhone, iPad, and iPod touch, and these files can build up over time. Generally iOS is pretty good at housekeeping, but if you’ve had a device for a long time and haven’t deleted old unused apps, resynced recently, or restored from a backup, you may have more of these temporary files and caches stored on your iOS device than you think.
You can use apps like iLike, Phoneclean to remover these junk files and "other" data:
iLike: http://download.cnet.com/iLike/3000-18512_4-75996452.html

Upload media file and submit data in a same time

Hi,
I'm trying to submit data and upload file in a same time to a web page(which is jsp). But i found that the method used to upload file and submit data are different.
Method used to submit data :-
PostMethod post = new PostMethod(wbIndex);
post.addRequestHeader("Content-Type","text/html; charset=big5");
for(int i=0;i<field.length;i++){
     post.addParameter(field,value[i]);
System.out.print("field[" + field[i] + "], value[" + value[i] + "] ");
responseCode = client.executeMethod(post);
System.out.println("response code : " + responseCode);
and method used to upload file
URL url = new URL(wbIndex);
// create a boundary string
String boundary = MultiPartFormOutputStream.createBoundary();
URLConnection urlConn = MultiPartFormOutputStream.createConnection(url);
urlConn.setRequestProperty("Accept", "*/*");
urlConn.setRequestProperty("Content-Type",
     MultiPartFormOutputStream.getContentType(boundary));
// set some other request headers...
urlConn.setRequestProperty("Connection", "Keep-Alive");
urlConn.setRequestProperty("Cache-Control", "no-cache");
// no need to connect cuz getOutputStream() does it
MultiPartFormOutputStream out =
     new MultiPartFormOutputStream(urlConn.getOutputStream(), boundary);
// write a text field element
out.writeField("myText", "text field text");
// upload a file
out.writeFile("myFile", "text/plain", new File("C:\\test.wav"));
out.close();Does anyone know how to submit data and upload file to the page at a same time?
null

Hi,
Thanks for your reply. You meant that both method also can used to upload file and submit data? How about if i want to use the first method to upload file and submit data? How can i upload the file by using first method?

Can't play .mov files in Xine

Hi
I am pretty new to Arch but it is great so far. I am running vanilla KDE4 with Xine as the Phonon backend. One problem I'm having is that I can't play .mov files. Other stuff like .wmv and .avi play ok. I also have the codecs package installed.
For example, no luck with this file
http://media.crossfit.com/cf-video/Cros … llUps1.mov
Thanks!

Welcome to the forums DeKay.
This isn't going to help, but I can confirm this using Xine 1.2 (dev) and almost a pure FFmpeg backend. ffplay and Mplayer can both play this file properly, so it's without a doubt a Xine problem. I ran a gdb trace on it and didn't really get anything to report upstream either.
Last edited by skottish (2008-11-15 23:11:08)

I installed a game, where can i find the files and maps? where does iMac store this data?

I installed a game,Now I need to add some files however, I cannot find where iMac stores it.. where can i find the files and maps? where does iMac store this data?
thx alot
erik

Depends on game, i would look first on the game file itself, right click (or ctrl click) the game file you installed (Applications?) and select show package contents, its usually a application bundle, as in basicly a folder where the application and the required files and subfolders are.

How can I convert .mov files for use with other apps?

When loading movies taken on a friend's digital camera to my PC, the video files were saved as Quicktime .mov files. I am now unable to pull those files into any other software program (I want to put them onto a CD or DVD and play on external players.) How can I convert .mov files to a .wmv or .avi or mpeg?
Thanks - J
RS720G Windows XP

Kodak Digital Camera QuickTime MOV Problems
After battling a number of serious problems with the videos taken by my new Kodak Digital Camera, I decided to write up this page so that anyone searching the web would find out the true answers without as much grief!
I’ve also made some other comments about my experience with the camera, in case anyone was considering buying a Kodak camera in the near future.
I bought the camera just before Christmas 2004 in the US. At the time of writing, it is a pretty good model for domestic use—about 5.2 megapixels, costing about US$400 (or AU$600 back here in Australia). From a company as reputable as Kodak, I expected no problems.
The first disappointing thing was that the spring inside the spring-loaded battery clip, inside the camera, came loose within days. It proved impossible to reattach it without completely dismantling the camera, which (despite my engineering qualifications) I was not willing to do. This would usually have been a warranty item, but Kodak’s warranty does not extend to other countries. I’ve since had to jam cardboard in to keep the battery clip engaged, and have taped the battery bay shut to avoid it opening accidentally when taking the camera out of the case. This works fine with the docking station (an extra AU$100!), but it means I can no longer charge the battery without the docking station (since you need to take it out to charge it). I was not impressed!
The camera takes good photos, and I have no complaint with that. The controls and camera menus are well-designed. The large display is excellent.
The EasyShare software is not as easy to use as it looks, has a habit of crashing, has a web update program that is always running in the background of Windows, and transferring images is nowhere as easy or quick as it should be. I’ve now uninstalled it completely, and simply copy the photos directly from the device. (If the camera memory is nearly full, and you just want to transfer the last few photos, then it’s impossible to use the EasyShare software to browse the camera’s photos without it actually downloading the whole lot through the USB cable—and it takes forever! Copying from the device directly doesn’t hit this bug.)
The capability to take video using the camera was a great attraction when I selected it, and, if it worked properly, it would make it quite a handy little camcorder in its own right. With a 512 MB memory card in it, over an hour of video can be recorded at Video-CD quality (320 x 240 24fps video, 8 kHz audio). It’s not full digital video, but it would still be a pretty good feature for a US$400 camera. If it worked.
The first disappointing thing about taking videos is that the optical zoom cannot be adjusted while the camera is recording. It can only be adjusted between video sequences. I don’t know why this restriction was made in the design.
The real problems, however, start when you try to do anything with the video clips captured by the camera. Kodak has chosen to capture the videos in QuickTime format. This is fine—QuickTime is, technically, excellent—except that there is no simple way to convert QuickTime MOV files to AVI or MPEG or VCD. The Kodak software comes with a QuickTime player, so you can see the video clips on the computer you installed the software on—and they look good. Problem is that you can’t just dump those MOV files onto your Video-CD creator (it will usually want AVI or MPEG files).
It takes some time to realise that Kodak have not even bothered to include any software with the camera that can convert these MOV files to a more useful format. This is a serious PR blunder, and anyone bitten by this is unlikely to go near the Kodak brand ever again.
After some web searching, owners of these cameras generally find that the best (only?) freeware solution to convert MOV to AVI is Bink and Smacker’s RADtools program.
RADtools is amazingly powerful for the price (i.e. free), but it hits two fundamental problems with Kodak Digital Camera MOV video files, that are the fault of the Kodak camera, not RADtools. (I know this because every other MOV converter hits the same problems—except one, as you will see below.)
The first problem is that the sound cannot be converted properly. When you convert any Kodak MOV files, there is an “aliasing” of the sound at the upper frequencies. This is a technical description—you get a whispery, tinny, C3PO type of echo to everything. It really destroys the quality of the video clips (especially bad when I am trying to capture priceless memories of my 4- and 7-year-old sons—I don’t want their voices destroyed for all time).
Every conversion program I tried ended up with the same audio problem. I concluded that it is something strange in the way the Kodak cameras store the MOV files.
Strangely enough, I noticed that the QuickTime player didn’t distort the audio like this. The audio sounds just fine through QuickTime. More on this shortly.
The second, more serious problem is that RADtools could not properly convert some of the video clips at all. (This problem only affected less than 10% of the clips I originally filmed, but most of those clips were very short—less than 20 seconds. It seems that the probability of this problem gets worse, the longer the clip.) RADtools would misreport the number of frames in the clip, and would stretch out a small number of frames of video (in slow motion) to match the length of the audio.
Again, I confirmed that this is a property of some of the MOV files stored by the camera. Other conversion tools also had problems with the same MOV clips.
After more angst, I found a number of websites in which frustrated owners of these Kodak cameras have reported the exact same problems.
It was only then that I discovered that QuickTime itself can convert MOV files to AVI. Believe it or not, it’s built into the QuickTime Player that Kodak supplies, or that you can download free from apple.com. The problem is that you can’t use it unless you pay Apple to upgrade to QuickTime Pro.
After realising that this would probably be the only way to get decent audio for these clips, I paid the AU$59 to Apple Australia to get the licence key that enables the extra “Pro” menu options in QuickTime.
Sure enough, you can “Export” any MOV file to a number of formats, including AVI. And guess what? The audio comes out fine!
So, the first piece of advice I can give is: pay Apple the US$29 (or whatever amount it is in your country) to upgrade QuickTime to QuickTime Pro.
From here, however, there are still a few snags to untangle.
The first is that the default settings for Exporting to AVI don’t give a great result. It defaults to the Cinepak codec, medium quality. This looks terrible compared to the original QuickTime movie. Even on maximum quality, that codec just doesn’t give good results.
I finally found that the best option is to use the Intel Indeo Video 4.4 codec, set on maximum quality. This creates AVI files that are 10 to 20 times larger than the original MOV files, but the quality is there. If (like me) you only want the AVI files so you can dump them into your Video-CD program, then you want to keep the quality as high as possible in this first step. The extra hard disk space is not really a concern. When your VCD program converts the AVI files to MPEG, it will compress them to the usual VCD size.
Now for the biggest snag: those problem MOV files are still a problem, even for QuickTime Pro. Unbelievably, these Kodak cameras are spitting out MOV files which have some sort of technical flaw in their data specifications. QuickTime is able to play them back fine—and that seems to be all that the Kodak engineers really checked. However, if QuickTime Pro tries to export them, then when the progress bar gets to the end, it never finishes. It just keeps going. If you check the output folder with Explorer, and keep hitting F5 to update the file listing, you can see the file getting bigger, and bigger, and bigger. It never stops.
That this happens even for QuickTime itself (the native format for these files) confirms that the problem is with the software built into these Kodak cameras. It would be nice it they issued a patch or a fix. I couldn’t find one.
Fortunately, there is a “workaround” for this problem. I found it when trolling the net trying to find solutions to all these problems. The workaround is to use QuickTime Pro’s cut and paste facility. Open the problem MOV file, then press Ctrl-A (the standard key combination for “select all”—in this case it selects the entire film clip, as you can see by the grey selection of frames at the bottom of the player). Then hit Ctrl-C (i.e. copy, which in this case copies all the frames, but not the incorrect data structure in the original MOV file). Now hit Ctrl-N (i.e. new, in this case a new MOV file or player). In this new player, press Ctrl-V (i.e. paste). Now you have a new version of the MOV file with the bad data structure exorcised. You can save this under a new name, but make sure you specify “Make movie self-contained”—otherwise, it will simply be a link to the original (bad) MOV file, which you are probably going to delete once you save the exorcised version. (You also cannot overwrite the original file, because it needs to access that to make the “self-contained” movie. You need to give it a slightly different name, save it “self-contained”, then delete the original and rename the new copy back to what you wanted it to be. A pain, I agree, but at least the **** thing works—finally!)
The exorcised MOV file can now be used to Export to AVI format. (I also keep all the MOV files on a separate CD, in case I want to reconvert them to a different format in the future. I figure it’s better keeping the exorcised ones than the haunted ones.)
So I hope that all this answers a few of your questions. No, you weren’t being incredibly stupid.

What can I do to improve a blurry quicktime video that was SMS'd to me it is a 1.24MB .mov file and I have QuicktimePro. It was taken on an Iphone but I am not sure with what software.

What can I do to improve a blurry Quicktime video that was SMS' texted to me? I think it was taken on an Iphone and it was sent to me as a 1.24MB .mov file and I have Quicktime Pro if that helps. I REALLY need to make this as clear as possible, the audio is good, video is blurry. Here is some additional data:

anything I can even try? Sender is off the grid? I don't need a production ready copy just viewable?
You can rescale (stretch) the size of the display but this will only make it blurier and/or introduce pixellation. When the file was encoded at a lower resolution much of the original data was thrown away to make the file smaller. This data is gone/missing and cannot be recreated from what is left. What you've got is all you have to work with. Any filters you can apply will require re-compressing the file again which will likely introduce more artifacts and increase the size of the file without really improving its overasll quality.

Hi apple users, I am in need of your expertise. I have a mov file and mp4 file which I need converted to DVD. However IDVD quality is terrible and wondering if anyone can help!?

Hi apple users, I am in need of your expertise. I have a mov file and mp4 file which I need converted to DVD. However IDVD quality is terrible and wondering if anyone can help!?
I created project in iMovie then exported it to MP4 and also MOV file at highest definition possible + I added it to iDVD and had a number issues about encoding errors regarding the mp4 file. MOV worked but the quality was terrible.....
MOV file is as follows:
4.08GB
Codecs: H.264, ACC
Colour Profile: HD (1-1-1)
Dimensions: 1920 x 1080
Duration: 12:33
Audio Channels: 2
MP4 File is as follows:
3.02GB
Codecs: H.264, ACC
Colour Profile: HD (1-1-1)
Dimensions: 1280 x 720
Duration: 12:33
Audio Channels: 6
I have a MacBook Pro using the Yosemite system upgrade.
I have updated iDVD and iMovie.
I even bought the iSkysoft app from the mac store and that was terrible too.
PLEASE HELP i am getting desperate and about to launch this macbook into the air
2.66 GHz Intel Core i7
Version 10.10. 2

First of all, Hunt--thanks for responding!
"First, where are you playing the MPEG-2, that you see that jitter?"
On both a MacBook Pro, an Acer laptop and my Mac Tower. I would love to think that it is a problem with the playback system, and that if I merely send the file off to the duplicator they won't have the same problem. Maybe that is the case...I don't know if I have a choice rather than sending it off to see. But it happens in the same spots, in the same way, on all three of the players so I'm a little reluctant to have faith.
"Another thing that can cause jitter in an MPEG-2 is the Bit-Rate - higher the Bit-Rate, the better the quality, but the larger the file. For a DVD, one is limited by the total Bit-Rate (both Audio & Video), but with longer prodcutions, some users choose too low a Bit-Rate. If this is the issue, one would need to go back to the original Project and do a new Export/Share."
Of course, but in the case there is no more 'original project.' It is gone like the wind, stolen along with his computer and backups.
I think I am stuck using one of two files as my master: a DVD he burned where I only see the stutter/vibration/jitter once, or the mpeg2 file where I see it three times. Hopefully, the duplication house can rip if off of one of them and not see the jitter. I know that in audio, my personal filed, you can do a lot to enhance already existing sound--EQ, compression, tape saturation emulation software, etc. I guess I'm hoping there is some kind of analog to the video world that address jitter after a source has been printed--if indeed the source has been printed to be jittery.
Thanks,
Doug

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

I updated my computer and now I can't play mov files from anywhere

I updated my computer and now I can't play mov files from anywhere - won't play in FCP 7, Quicktime. Not sure what updates they were specifically since i hit the "update All" button without going over each one. Please help!! operating on 10.6.8 with FCP7

Just take a look at the last few days posts here and you'll see many people with the same problem and some possible solutions.
But you should never do any software updates unless you have a bootable backup of your startup drive. FCP7 is no longer being supported by apple and updating anything is fraught with dangers.

Does apple store the .mp3 and other files I've purchased 'in the cloud'?

Does apple store the .mp3 and other files I've purchased 'in the cloud'? I had to restore my PC and forgot to back them up. If not, I assume I would potentially need to purchase them again, right? Please help.
THIS IS REGARDING THE iTUNES Client Application V10.9.
Thank You,
The Technology Diva

''rajkumar05 [[#question-1049891|said]]''
<blockquote>
there is a problem with the firefox browser in my firefox os 1.3 intex cloud fx since i am not able to download any files using it.
there are no other browsing application in the marketplace to, so help is required
thanks.
</blockquote>
Hello Rajkumar,
You can easily download media file. Follow these instructions: [http://mzl.la/1xKvGNs]

HT1449 Can I just move my movie files and leave my music files where they are?

Can I just move my movie files and leave my music files where they are?

Yes, but bear in mind if you move the movie files, any files, from the iTunes media folder iTunes will not know where they are and therefore cannot access them. It will be up to you to tell iTunes were they are in order to use the files.

What is the best software programs that I can use to read, write and modify data / files on external HD (NTFS format i.e. Windows) ?

Hi guys,
I’m new to Mac and have a MacBook Pro Lion OS (10.6.8 I think !!!) with Parallels 7 (Windows 7) installed. Can someone please tell me what is the best software program that I can use to read, write and modify data / files on external HD (NTFS format) from the Mac OS ? I heard of Paragon and Tuxera NTFS. Are they free ? Are they good ? Are there any other software programs out there ? I heard that some people have issues with Paragon.
Thanks.

Your best bet would be to take the drive to the oldest/compatible with that drive Windows PC and grab the files off, right click and format it exFAT (XP users can download exFAT from Microsoft) and then put the files back on.
Mac's can read and write all Windows files formats except write to NTFS (and in some cases not read) so if you can change the format of the drive to exFAT (all data has to be remove first) then you will have a drive that doesn't require paid third party NTFS software (a license fee goes to Microsoft) for updates.
Also it's one less hassle to deal with too.
.Drives, partitions, formatting w/Mac's + PC's

Can I store Movie files and other data on my Zen Xt

Similar Messages

Maybe you are looking for