Can I swap my existing MacBook Hard Drive into my a New MacBook Pro

I have a macbook black running snow leopard with 500gb seagate HD and am looking to upgrade to a Macbook pro. Can I swap the HDs? Will the MacBook Pro boot up?
How do i do it?
I have an extra new 320GB HD, which i would like to put into the Black macbook; I have the Snow Leopard upgrade in a 5 pack. Can I use it to give the Hard Drive a clean install? Will it pick up what it needs from the Snow Leopard install?

Not necessarily. As I said the new models have a different build installed. The build you are now using may not work because it will not contain all the needed new hardware drivers. You can give it a try. If it doesn't work properly then you will need to reinstall OS X using the installer discs that come with the new computer.

Similar Messages

  • Can I swap old iMac (white) HARD DRIVE into iMac (alu) w/ OS installed

    I have the older iMac 20" intel with a 500GB hard drive and wanted to swap it into my newer iMac 20" aluminum, which currently has the 320GB hard drive. I was wondering if the disks were physically swapped, would the OS still run considering the newer hardware?
    Would Leopard be able to recognize the hardware changes or would a backup, reinstall and restore be in order? I am trying to avoid having to move all my data to an external only to put it back on again the same drive. Thank you!

    Physically the drive is swappable but not without voiding your warranty. As for the system goes theoretically it would work however since the ALU iMacs are newer than your current white iMac, your current system lacks all of the hardware drivers for the new iMac and the system would need to be reinstalled. Probably the easiest way would be to use the migration assistant to migrate your files from your old computer. However if you still plan on swapping the drives what you could do is swap the 500G into your new iMac then immediately boot up to the install disk that comes with the ALU iMac and perform an Archive install of the system. It would be a good idea to backup all of your data before physically moving the drive just in case.
    George

  • I have two separate iTunes libraries on two separate Computers. I need to consolidate them so I can play them on a brand new computer. How do I do this so I can play them off an External Hard Drive on my brand new computer?

    I have two separate iTunes libraries on two separate Computers. I need to consolidate them so I can play them on my brand new computer. How do I do this so I can play them off an External Hard Drive on my brand new computer?

    Why, if it told you you have insufficient space on your computer, would it suggest making more space available on your phone?
    At a guess, you have insufficient space on your phone. Installing software will typically require more space than the final size of the software, perhaps even twice or three times as much, for the installation process. You can easily dump some videos or music temporarily, and then synch them back in afterwards.

  • Can I Use an Old External Hard Drive to Back Up my MacBook Pro?

    I am currently using a 2010 MacBook Pro with Snow Leopard (Mac OS X 10.6.8) and I am thinking of upgrading to Mountain Lion when it comes out. So that means I should really back up my Mac. I have never backed up my Mac before nor have I ever backed up any of the PC's I owned in the past. With this being my first Mac and my first time backing it up I want to make sure I do this right.
    So my question is can I use my old exteral hard drive (Got it back in 2004 for University. Used with a PC) to back up my MacBook Pro with out running into any issues if I have to restore my Mac??

    tokine wrote:
    So my question is can I use my old exteral hard drive (Got it back in 2004 for University. Used with a PC) to back up my MacBook Pro with out running into any issues if I have to restore my Mac??
    yes.  connect it to the usb port, open disk utility, erase the disk and format to Mac OS Extended (Journaled).  That is the most common format.  Then backup as necessary.

  • Can you fit in a 7200rpm hard drive into a macbook?

    mac book pro is expensive.
    my main concern about the black macbook is that the hard drive is less than 7200rpm. music software pro tools says to use 7200rpm drives.
    so is there a way to put one in? it doesnt seem to be an option to upgrade on mac shop.
    pro is expensive!
    thanks

    Aaron Michalczuk wrote:
    Personally, I would recommend you try newegg.com they usually have very good deals. All you need to look for is a 2.5 inch hard drive (usually called a notebook drive or laptop drive). It also should be SATA. Other than that you can just look for whatever specs you would like. I would recommend Western Digital, Seagate, or Samsung as excellent brands. However, for the most part it wont matter too much. I recommend newegg, because it is the largest online computer retailer in the world (i think) and all of their products have good reviews so you can read up on how the hard drives have worked for other people. The hard drive that came stock in my macbook is a Fujitsu which is just another manufacturer. I would base your decision off of the specs and the ratings, not the manufacturer. Just remember 2.5" SATA
    I bought from my 200 GB Travelstar 7K200 from Newegg myself. That being said, I doubt Newegg is the largest online computer retailer in the world; they've got an annual revenue rate of just under $2 billion. I'd think Dell would be bigger, although their $68 billion per year may include store sales now that they have boxed computers sold at other retailers. CDW is also bigger.
    You forgot the most important spec. The drive height can't be more than 9.5 mm. There are a few oversized drives that are thicker and won't slide into a MacBook.
    Best Buy (if you're in the US) has a 200 GB Hitachi Travelstar 7K200 kit complete with USB enclosure for $159.99. It comes in a full retail package, while most of the drives at Newegg come as bare drives in an antistatic bag. I actually paid more just for my drive from Newegg earlier this year, although the price has gone down.
    http://www.bestbuy.com/site/olspage.jsp?skuId=8682222&type=product&id=1197679249 375

  • Reformating external hard drive for use with new MacBook Pro

    I'm trying to figure out how to use an existing external hard drive (formatted for a Powermac G4) with my new MacBook Pro. I understand that the file formats are different and that I need to erase the hard drive and reformat it with a GUID partition, but how does one do that?
    I've already erased the drive with disk utility (using the old Powermac) and connected it to my MacBook with the hope that it would be recognized. No dice, alas. It doesn't mount at all.
    Any suggestions on how to proceed would be greatly appreciated. Thanks!

    My external harddrives all work just fine with the MacBook Pro. You shouldn't have to reformat anything. I think if you did then it would not be backwards compatable with the older systems. Stick it back in your old computer and try to mount it again, repair permissions shutdown your macbook pro and connect the external drive then reboot

  • How to import previous Itunes database from external hard drive into Itunes on new computer

    I need to know how to import a previous iTunes data base that is saved onto an external hard drive into the iTunes library on my new computer

    There's only one way to do this.
    Copy the iPhoto Library from the old machine to the Pictures Folder on the new machine. You have to copy it as a single item. Then open it, don't import it.
    Regards
    TD

  • Can I just plug in my PC formatted Hard Drives (Vista) to my new MacBook Pro?

    I am a new Macbook Pro owner.  Have existing PC (Vista OS) workstation and Macbook Pro with Mountain Lion OS.  All my photos are on PC formatted external hard drives.  I have Adobe Lightroom loaded on both PC and MAC and would like to access the PC formatted external hard drive from either PC or MAC.
    Do I need to download any special application to allow my MacbookPro to connect, read, and write to these drives?  (I haven't tried to plug them in yet - afraid to damage them)
    Do I need to reformat my external drives to a Mac format to make them run better?
    thanks in advance for the help.
    Jon

    What's done is done and your probably full(ish) drives in NTFS format will remain as they are. When you add a new one to the collection, might want to investigate formatting it in ExFAT format instead. OS X will happily write on it as will Windoze. And you have the advantage over the ancient Fat32 format that you can create and store files over 4GB in size safely and without data corruption.

  • Is it worth it to replace the hard drive of a brand new macbook?

    I'm buying a Macbook today and realize it would be cheaper to buy the 160gb laptop, and switch out the hard drive to a 320 gb (its only $76, compared to the $300 difference between the 160gb macbook and the 250gb macbook).
    I picked out the hard drive and I know where the hard drive in my laptop will be located, and how to remove and replace it. However I'm a little worried about actually doing it. I wouldn't need to back anything up because I haven't used it before, so can I just replace the hard drive before I ever even turn it on for the first time?
    Also, I've never done this before..
    What are the risks I'm taking by doing this?
    and, is it worth it?

    Yup, gotta love OWC!
    Try this:
    1. Place order for DIY (external enclosure kit + HD) kit.
    2. While waiting for delivery, enjoy your MacBook.
    3. When kit arrives, back up your MacBook to DVDs!! You know how, right?
    4. Swap drives. Careful, you'll need to swap the 4 mounting pins from the current HD to the new one. Our current HD uses hex-keyed pins. And the kit came with enough screws, right?
    5. Install "old" HD from MacBook into enclosure (FireWire 800 (zoom!) for Pros, USB for Not Pros). You did order the right one, right? And it came with the right cables, right?
    5a. Boot 'Book from that external device (you know how, right?). Maybe not as fast via that cable, hm?
    6. Restore to the new internal HD and now reboot from it. Check that all is well before . . .
    7. . . . erasing "old" HD in new enclosure. Your backup was fine, right?
    8 (and last). Use "old" HD in enclosure as your Time Machine device. What could be better? Continue to use DVDs to back up the whole Mac. (Though there are even cooler ways to bulletproof it . . .)
    With Leopard's tools, and these new Macs, geekery will never be the same. It's insanely easy to keep your stuff safe and sound for not that much $$. So gofer it!
    MSES

  • Can I drag and drop entire hard drive into and external hard drive?

    I want to back up my MacBook Pro before I send it in for optical drive replacement. However, the Time Machine back up app wants me to erase my external drive and reformat before it can back up my files. I already have information from other computers on the external drive, so erasing and restoring is out of the question.
    Can I just drag and drop my hard drives (Macintosh HD and BOOTCAMP) into the external hard drive?
    Will that transfer everything?
    As a side note, can anyone tell me why Time Machine doesn't work with the external drive? My dad has files on it from his Mac and I have a couple movies saved on it from this one. Is it possible to maybe partition the external drive to accommodate both and reformat only one partition without losing the other saved files?

    Hi
    +"So does reformatting make the external hard drive only usable by Macs/Time Machine?"+
    Not really. If the external drive is formatted as FAT32 you can read/write to that drive from any Mac as well as any PC. If the external drive is formatted as NTFS you can only read from it but you can read/write from any PC. You can write to an NTFS formatted volume if you use a 3rd-Party Utility such as MacFuse. If the drive is formatted as Mac OS Extended you can read/write to it from any Mac. Unless you install a 3rd-Party Utility (I don't know of any offhand) you won't be able to read/write to it from any PC. PCs don't know what a Mac OS Extended format is.
    As already mentioned TimeMachine will not work with any other format other than Mac OS Extended.
    +"Will I be able to use the same external hard drive to back up multiple Mac computers with Time Machine?"+
    Yes but only if that external drive has been formatted as Mac OS Extended. If there is existing data on that drive that you don't want to lose back it up first.
    +"Will I still be able to drag and drop movies into the external hard drive for basic storage?"+
    If you leave the external drive exactly as it is - ie no formatting - and you have already drag/dropped files to it from your mac or any other mac then you will be able to continue to do this.
    Tony

  • Using my iTunes library from an external hard drive to a brand new Macbook.

    This seems to be such a simple thing to be able to do but I'm fearing it's not. Basically I've had an iMac for 3 years and during that time have built up around 165gb in my iTunes folder. So I learnt off the net how to move my library onto an external hard drive so that I can free up the space on my iMac and play my iTunes library from the external drive. So far so good. My iPhone 4 is obviously connected to my iMac and thats how I get my media on and off the phone. Here's where my problems begin.
    I've just bought a Macbook Pro. Its obviously empty and has no media on it. I have paired my iPhone 4 with the new Macbook but obviously the iTunes library on my new Macbook is empty. I downloaded a couple of podcasts onto my new machine and tried to put them onto my phone but got a message saying that the podcasts I currently have on my phone (that are on there from my iMac iTunes library) were going to be deleted and the new ones would be put on. Still with me? So, if I could get my original 165gb library thats now on my external hard drive to be seen on my new Macbook that would possibly solve my problems. But I cant see a simple way of doing this. I've pointed the iTunes Media Location folder in the preferences on my new Macbook to the same folder on my external hard drive as is on my iMac but iTunes on my Macbook is not showing up my library. Do I really have to open every album into iTunes on my Macbook seperately? It seems such a stupid, laborious way of doing it. As if you cant have two Apple computers and run one iTunes library off an external hard drive so that its the same on both machines.
    Help!
    Message was edited by: Eels290776

    Eels290776 wrote:
    if my external hard drive is not connected to either of my machines, and I download something onto my iMac and then something different onto my Macbook, where are my machines going to be storing the new downloaded media
    when the drive is not connected, +iTunes media folder location+ will default back to <MacintoshHD>/users/<yourname>/music/iTunes/iTunes music (or media)
    and when I next connect the external hard drive how will I easily get the newly downloaded media onto the external HD
    you'd have to point +iTunes media folder location+ back to the external via preferences > advanced > iTunes media folder location, then file > library, organize library > consolidate files
    and essentially, to have it easily readable on both machines?
    in that case it might be best to copy the entire iTunes folder to the external. then, on each machine, launch iTunes while pressing option on your keyboard. when prompted, click on +choose library+ and navigate to the iTunes folder on the external.
    note only one iTunes can access the iTunes library @ a time !
    also, make sure the external is mounted on either machine before launching iTunes.
    JGG

  • Use existing external hard-drive music library with new laptop.

    I moved my I-tunes library to an external hard-drive on my previous laptop. That worked fine. After a hard disk crash I am now configuring a new laptop (installing I-tunes) and I would like to keep my music on the external hard drive: How do I proceed?

    Depends on whether you had your complete library (including the iTunes database) on the external drive, or just your media files and folders.  If the former, you can just hold down shift as you start iTunes, and when you get this is prompt:
    click on Choose Library... then navigate to and select the iTunes Library.itl file on the external drive.
    In the other case - and assuming that you can't copy or retrieve the database file from your old machine or a backup of it, create a new library in X:\iTunes (where "X" is the drive letter of your external drive, make sure the settings in Edit > Preferences > Advanced are as follows:
    and then use File > Add Folder to Library... to add your existing media folders.

  • Why won't my new hard drive mount on my new MacBook Pro but will mount on my old MacBook Pro

    I bought a new MacBook Pro to replace an older MacBook Pro.   I also bought a new Toshiba 1T portable hardrive to backup my new computer.   The Toshiba hard drive will not mount on the new computer, but it will mount on my old computer.  
    However, I have two other portable hard drives (320 MB and 500 MB) that do mount on the new computer.   I am puzzled as to why the new MBP will not display my Toshiba 1T portable HD.
    Any ideas?

    The only way I could get my Toshiba 1 TB USB 3.0 drive to work was to buy this cable from Amazon: http://www.amazon.com/gp/product/B005M0ICG2/ref=oh_o05_s00_i00_details
    I tried a Kindle cable, I also ordered a thick data / power cable and it would not work. So I tried this dual USB cable and my drive is working great now.
    You may be able to find it else were but the bottom line is you have to use both USB ports on your MacBook in order for this drive to work. I'm using a late 2011 MacBook Pro.
    SyN

  • External hard drive not recognized on new macbook

    we have an external harddrive that we used as the time machine for our previous imac. we just bought a macbook pro, and the harddrive is not recognized and does not show up on the sidebar. it is however shows up on disk utility but i dont know what to do with it/how to get files from my old time machine. please help! thanks

    The hard drive will not show up on the sidebar or desktop unless Finder preferences are set to do that:
    In Finder's General preference section, make sure "External disks" is checked in the list of things to show on the desktop if you want to see them there.
    Likewise, in Finder's Sidebar preference section, make sure "External disks" is checked in the "DEVICES" section to see them automatically appear on the sidebar.
    But you don't need to do either for the MBP to recognize the drive, or to get files from its Time Machine backup set. To do that, you should use the Time Machine "Star Wars" interface. Pondini's FAQ's (already mentioned) tell you how to do that. Tip 17 is particularly relevant.

  • WD External Hard drive not working with new Macbook Pro

    I have recently upgraded to a new Macbook Pro and when connecting a WD 1 TB Passport external hard drive, it doesn't appear on the MBP, but when I connect it to my old Macbook running 10.5.8, it appears normally. Is this a problem with formatting or an issue because it is USB 2.0...
    Any help appreciated as I have a lot of data on the hard drive and would like to be able to use it with my new MBP.

    I'm on Lion, with similar issues with two WD external HD. But what I found fixed the problem was to:
    1. go to the manufacturer's website (in this case Western Digital),
    2. locate my external HD, download the download.
    For instance, I downloaded the WD Drive Utilities for Mac (for My Passport for Mac USB 3.0):
    http://support.wdc.com/product/download.asp?groupid=219&sid=157&lang=en
    Install the downloaded app.
    3. Plug in external (this part, I think is important) directly into your tower or laptop (as opposed to through a USB multi-plug extender). Possibly this is because you access more power?
    [I'm trying to remember in which order everything happened. But I think at this point the external hard drive mounted]
    4. Install the software that is found on the external HD (in my case, it was a brand new device, so that had never been installed).
    5. Run "WD Drive Utilities" and run diagnostics.
    6. Test to see if it holds. Unmount the External HD. Unplug. Replug in and see if it mounts.
    Note: I have not yet tested to see if plugging in the external somewhere other than directly into the tower also works. But I think the main problem is getting it to mount the first time and installing the software. That's what I think.

Maybe you are looking for