Can I swap out my old Areca 1880-ix with the newer Areca  ARC-1883

Hello everyone.  It's been a while since I've been here.
I think, but am not sure, that my Areca 1880-ix is dead. I'll be contacting Areca support to see if I can have them help me troubleshoot it.  Like they did a year or so ago.
In any case I see a new Areca  ARC-1883 added to their line.   Areca Technology Corporation and here Areca Technology Corporation
And if I can't get the old 1880-ix working, I am wondering what the Abobe forum's thought might be about this new Areca  ARC-1883.
To summarize, I have one system hard drive, and 4x 1TB hard drives = 4 TB.
Based on anyone's experience here, does such a swap make sense?  
Looking forward to a discussion here about my choices.
I do see Bill's post here:  Upgrading HD Capacity Areca
Thanks all!
Rowby

Hi Bill
Checking some of my older forum posts I found that I had encountered this issue before. 
ASUS P6X58D Memory OK (MEMOK!) issue DRAM LED Stays solid red.
It turned out that my problem was just the motherboard's battery had died.  We're talking about a 99 cent battery!
I replaced the battery with a new one.
And the PC booted up just fine.
(This was after I totally disassembled the computer -- testing the power supply with the "paper clip" method, reconnecting all of my cables.
By chance, I found that old post.  And, at least for now, all is fine.
Great to have this forum and pros like you -- and Harm -- and all the others -- as a great place for troubleshooting and expert help!!!
Rowby

Similar Messages

  • I'm have iPhone's & iPads with AT&T.  I want to change to Verizon. Can I still use my old iPhone and iPads with the new company?

    I'm have iPhone's & iPads with AT&T.  I want to change to Verizon. Can I still use my old iPhone and iPads with the new company?

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, then sign back in with the other ID.  When you delete the account it will prompt you about what to do with the iCloud data.  If you need to migrate it and merge it with the data in the new account choose Keep on My iDevice; then choose Merge to upload the data and merge it with the new account.  If your data is already in the other account and you don't need to migrate it to the other account, choose Delete from My iDevice.

  • My iPod broke.  can i still access my old iTunes i bought with the new one?

    when i try to install the new cd the computer tells me to uninstall the old version. will i lose all of the songs i purchased from iTunes by doing this?

    yes, just back them up on cd or some other way then rip them back into itunes, but u can use the old itunes with the new one,
    Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

  • How can you find out if your mac is infected with the flash back virus

    how can you find out if your mac is infected with the flash back virus?

    F-Secure's Flashback removal tool - http://www.f-secure.com/v-descs/trojan-downloader_osx_flashback_k.shtml - supposedly also works on OSX 10.5 and earlier.
    05 Apr 2012 How to Detect and Protect Against Updated Flashback Malware - http://tidbits.com/article/12918 - detection methods for multiple browsers and general information
    Leopard and earlier users see recommendations at: https://discussions.apple.com/thread/3872491

  • I am used to "drag and drop" content from my computer to my old i-pod.  With the new i-tunes, I can't seem to do that.  Any suggestions?

       I am used to "drap and drop" content from my computer to my old i-pod.  With the new i-tunes, I can't seem able to do that.  Any suggestions?  Thanks.

    diana42 wrote:
    My problem is that Itunes does not acknowledge inserted CD in DEVICES area,
    Are these Audio CDs?
    Only Audio CDs will show up in iTunes.
    This is new to me because I am used to importing and making copies from my playlists.
    I don't follow. Would you explain this a bit more?

  • I have a new mac book pro. Will my old jam packs work with the new garageband?

    I have a new mac book pro. Will my old jam packs work with the new garageband?

    I have same problem, been using a macbook 13" for nearly 9 years but it was failing so I bought a macbook pro 15" and after having problems and error messages when trying to download loops ( I finally went to the App Store and opened garageband from there which install some loops), it finally downloaded some but not all the loops that my jam packs had, also I have tons of non-apple loops that I purchased over the years but I want to know if they will work on my new mac ?
    macbook pro 15"- 2.3ghz - 8gb- 2TB

  • I currently have Mac OSX 10.4.11, and I just purchased OSX Snow Leopard. Can I keep my original version of iMovie along with the new one when I download the new operating system?

    I currently have Mac OSx 10.4.11, and just purchased OSX Snow leopard.  Can I keep my original version of iMovie along with the new version when I download the new operating system?

    I purchased the Mac Box Set which includes Snow Leopard, iLife, and iWork.  So after downloading the box set, will I be able to keep my iMovie 6.0.3?

  • Everytime i download photos, my old phottos get replaced with the new ones

    how do i create a new folder or area for the new photos to go so that my old photos do not get erased?

    Exactly what are you doing to sync the photos? You should be putting photos into a folder on the computer. Point iTunes to sync that folder. As long as you keep all the photos in the particular folder, they should all stay on the iPhone. However, if you are just syncing the photos, then changing the content of the folder that you are trying to sync, then yes, it would remove the old ones and just have the new folder contents in the phone. Leave all of the pictures in the same folder and just sync that folder. Does that make sense to you?
    I hope this helps.

  • Can I swap out my old HD when I upgrade....

    Ordered an 15" i7 MBP. I'd like to swap my old HD out (256MB SSD), rather than go through the bother of reinstalling everything or even doing a Time Machine backup. Is this possible? What will happen when I try to boot the new machine with my old HD in it?
    BTW - My old machine was a 15" Core 2 Duo unibody.

    What will happen when I try to boot the new machine with my old HD in it?
    Nothing, most likely. The OS installation that ran your old machine probably won't boot the new one.
    Back the old drive up to an external drive using Time Machine or cloning software. With the old machine in FireWire Target Disk Mode, erase the old drive and clone the new MBP's hard drive onto it. Swap the two drives and test-boot the new machine to make sure the clone is OK. Then use Migration Assistant to migrate your data from the backup of the old drive onto the drive in the new MBP.
    If you want to use or sell the older machine, use the discs that came with it to reinstall a suitable OS for it on the drive you took out of the new machine.
    Message was edited by: eww

  • Hi, why can't I use my old e-print address with my new printer?cc=NL

    I have a newer photosmart 5510 model and had to install it again. But when I tried to connect to the eprint centre it only worked when I removed my old printer. But than I couldn't use the emailaddress because I got the message it already existed... How do I change this? I used the same login.

    Hi,
    My suggestion: change the old one to a different one then try again. Or you can do using this order:
    1. Add a new printer (now you have 2),
    2. Remove the old printer, (now only new one) 
    3. And then Change the new printer to the old email address.
    Hope this helps.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I can't figure out how to report a bug with the Javascript debugger as it asked me to

    I pressed the Javascript Debugger button after installing it on my toolbar, and got this message:
    An exception occurred while initializing, please file a bug.
    [Exception... "Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [jsdIDebuggerService.on]" nsresult: "0x80004001 (NS_ERROR_NOT_IMPLEMENTED)" location: "JS frame :: chrome://venkman/content/venkman-debugger.js :: initDebugger :: line 131" data: no]
    But I can't figure out *how* to file a bug. That link really ought to be on your homepage if you want people to do this...

    Please post a screenshot.
    Also, try to be as precise as possible in your terminology. When you say "project window," do you mean the Program Monitor? Anyway, I presume you don't mean the Project panel.

  • I'm unable to get my macbook pro to work with an Optoma tx542 projector.  I've got a VGA adaptor, and the projector works with my old iMac, just not with the new macbook.  Any ideas?

    The projector recognizes it's a mac, since I see the mac desktop background on my screen when I connect, but I'm not seeing my desktop.  Any ideas?
    Thanks!

    ugh...i'll be sure to let you know...i'm beginning to regret buyin a mac now...one usually spends the bucks most of have dropped for a premium machine, to actually work. I don't expect every aspect to be perfect, but simple things such as functionality of applications developed for and by the same company making the machines should work...maybe its just because i'm more than a little peeved that i'm going through such trouble to do something as simple as put two pictures next to each other and upload the site (as it appears in iweb) on to the mobileme...
    I finally got it to upload, thanks Old Toad, and i got the pictures to upload...now they just don't appear next to each other as they do in iweb...i guess the good thing is that they are no longer covering text...
    now i'm presented with a second problem...i add a second entry to my blog and when i click on that directly i'm taken to a page saying it is not found...but when i go to the first entry and click next it takes me to the second entry page...although that page is ALMOST correct (the links do not have the same styling i applied to them in iweb)...
    and now i'm presented with a third problem...after adding the second entry i noticed on the blog listing page that my photo from the first entry did not move with it (another photo covering text problem)...so i tried using the graphic placeholder, but the image still does not show up on the main page...

  • I just got the new iOS5 update for the iPhone 3GS and I cannot receive messages because it says that the SMS is full. I deleted all my texts, but still cannot receive texts. Is there something I can do???, I cannot receive texts with the new iOS5 update

    Hi everyone, I just got the new iOS5 update for my iPhone 3GS. I receive a message saying that "Your SMS mailbox is full. New messages cannot be recieved until you delete some messages." I deleted all of my messages but still could not receive texts after restoring and restarting my phone. Can anything be done to remedy this??? Thanks!

    Apple is screwing the pooch on this one.  Need to call in and be vocal. 

  • I can't print a label for my burned CD with the new ITunes format

    Where can I find a place on the new ITunes format to print a CD Label?

    File > Print.

  • Why are my old playlists are gone with the new iTunes?

    I think I know how to navigate the new iTunes interface now, but I cannot find the unique playlists I made of songs in my library. All the albums I made are there, but not "And Yet Another Oldies but Goodies" and those like it. What happened? Can I find them? How?

    Dunno.
    How is it not working?

Maybe you are looking for

  • Install boot camp update for Trackpad on windows 8.1

    Hello Participants, i want to use my trackpad on a windows 8.1 computer. I´ m searching  a guide for install boot camp 5.1 Update on windows 8.1.  I ´m in Germany. Greetings and thank you

  • Sql developer behavior, expands table.* to show all fields?

    Am I doing something wrong, or does sql developer (10g) have an odd behavior? If I create a view select mytable.* from mytable it saves the view like select mytable.myid, mytable.mycol1, mytable.mycol2 from mytable IE it replaces the mytable.* with a

  • Getting Validation Error at B2B Console for 856 Outbound B2B-51507

    Hi, We are getting this error while sending the EDI 856 in an outgoing Process. We are getting the data from Oracle Apps and sending it to B2B via B2b adapter using mediator. we are using X856 ecx file and X856 xsd. Can Anyone help in this. If Anyone

  • Using external javascript functions

    So I have a couple of scripts that I use to create a 360 image rotation and an auto rotate on page load that I use before animating them in Edge Animate.  Here's an example of what I mean. the 360 rotation is just cycling through a series of images t

  • Can IDM 8.1 support MS Exchange 2010 ?

    Hellos Is there ANY way we can introduce Exchange 2010 support into our IdM solution? Customers are migrating directly from Exchange 2003 to Exchange 2010. What is the status re Active Directory "connectors" is there any sort of IdM migrating tool to