Can I swap ram from a Powermac G4 400 PCI into a Powermac G4 Quicksilver?

Hi,
I have a Powermac G4 400mhz PCI, but I'm looking at getting a Powermac G4 Quicksilver 933. I wondered if I can swap some ram from my Powermac G4 PCI into a Quicksilver.
I have gone to the Crucial website and it says the Powermac G4 PCI and the Powermac G4 Quicksilver both take SDRAM, PC133.
But in my Haynes Mac manual it says the Powermac G4 requires SDRAM, PC100.
Who is correct? I would rather swap of course to save money.
Thanks.

Hi, thanks for the replys.
I have gone into about this Mac, more info and this is the info I get about the memory:
DIMM3/J22:
Size: 256 MB
Type: Unknown
Speed: Unknown
Status: OK
I have recently upgraded to 10.4.8.
I'm sure under 10.4.5 a lot of the info for my ram was not 'unknown'.
Are there any utilities out there that will give me more ram info?
On the Crucial website they have one but it is for PC's only. I'm sure one of the 256 ram sticks are PC133 SDRAM as I bought a ram stick from Crucial about a year ago.
Thanks again.

Similar Messages

Can I put RAM from my MacBook Pro into my MacBook?

Hi,
I just bought a 2.5GHz MBP, and I will be ordering 4GB of RAM from Crucial. We also have a 1.83GHz MacBook, which has only 512 MB of RAM installed at the moment...
Can I use the RAM that will be left over from the MacBook Pro in my MacBook, so that it will have 2GB (its maximum)?
Thank you!
Alexandra

Yes that should work fine. They use the same modules.

Can I use RAM from MBP 15 late 2011 to MBP 13 mid 2012

Hi All,
I presently have an MBP 15 late 2011 (running at 4GB RAM) - which I feel is very slow. Had been reading a lot of discussion threads and most viable solution seems to be to upgrade my RAM - found it in Crucial.com (8gb x 2 kit).
I have another MBP 13 mid 2012 (running at 2GB RAM). I was wondering if I can transfer my 4GB RAM from my MBP 15 to my MBP 13.
Will there be any compatibility issues? Will this work?
Can anyone advise please?
Thanks.

Macs can be very Fussy about RAM...
You can use these Links to check which RAM is suitable for your Mac...
http://eshop.macsales.com/shop/apple/memory/
http://www.crucial.com
It is Important to get the Correct and Matching RAM
Those sites also have videos on how to Install RAM should you need it....

Can you swap drives from old mac to new mac?

Hi. I see new mac pros came out today and I want to get one. If I sell my current mac, can I just take out my drives and put them into the new one so I don't have to reinstall all my stuff?
Will the new system recognize the new processors and fsb and just reconfigure, or will some of the system files be screwed up?

Hi lisamel;
Probably not. The reason I say this is because the new Mac will probably have updated drives in the system that are not in your old system. What you can do is to take the old drive and install it into the new Mac and when it starts up the first time it will ask if you want to migrate from an old system. If you tell it yes, you can then point it at the disk from the old Mac and it will move everything over from the old disk but retain the new system.
Allan

Can I mix docs from document feeder and scanner glass into one PDF?

When working with the HP Scanner software, prior to Windows 8, I was able to MIX the source of my documents, meaning I could put all the standard size docs on the document feeder, scan them, and then ADD non-standard sized documents, one at a time, to the same PDF from the scanner glass. The Windows 8 Scan and Capture software seems to make me pick one or the other. It was SO convenient, when doing my expense reports, to be able to scan 15 pages or so using the ADF, then use the glass for all of my receipts that were small or damaged. Am I missing something, or is the Win8 software more limited? Thanks for any help you might provide!!

Hi ysroq,
Welcome to the HP forums! I see that you are wondering if you can mix docs from document feeder and scanner glass into one PDF. I am happy to help, I have a couple questions for you:
What type of printer do you have? To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number.
How is the printer connected? Wireless or USB?
Hope to hear back from you, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Can you import video from dvcam using a dsr 2000 into final cut pro 10?

Can you bring video from a DVCam tape using a DSR 2000 into Final Cut Pro?

Should work OK with the iLink (a.k.a. Firewire a.k.a. IEE1394a) interface, but you may have to capture using iMovie, then ( in FCX) running File > Import > iMovie Events.)

Can I install RAM from 2011 Macbook Pro into 2009 macbook Pro?

I just upgraded my new mbp from 4 to 8gb. I have a friend with what I think is an early 2009 mbp. Can I take my two 2gb (4gb total) chips and put them in his?
Also, if his is newer, same question. I know that recently (not sure when exactly) the memory cap was raised to 8 on the mbp. So I'm wondering if it's a different kind of chip that wouldn't be compatible with older mbp's.
Thanks for you help!

You can try it, but it may not work, because your RAM is faster than what's specified for his machine. It should downclock to the speed of his system bus, but it doesn't always.
To use 8GB in an early-2009 MBP, it must be running at least OS X 10.6.6 and have the latest Apple firmware update installed on it.

Can I take RAM from MacBook Pro 2012 and install in MacBook 2010

I am upgrading a MacBook Pro 2012 from 8G to 16GB of RAM
Can I take the old 2x4G RAM DIMMS and install them in my daughters White MacBook 13" 2010 (7,1)
Thanks...

Your 2012 tech specs state 1600 MHz:
http://www.everymac.com/systems/apple/macbook_pro/index-macbookpro.html
whereas the 2010 white Macbook takes 1066 MHz:
So, the answer would be no.

Can I swap memory from a late 2012 mini to a late 2010 mini

I just upgraded the memory on my late 2012 mini. I'm wondering if I can swap this memory into my late 2010 mini. They are both DDR 3 204 pins.

See > http://support.apple.com/kb/ht4432
As you can see, the Late 2012 Mac mini uses PC3-12800 DDR3 1600 MHz RAM, and the Mid 2010 Mac mini uses PC3-8500 DDR3 1066 MHz RAM, so the Mid 2010 Mac mini can't use the memory of your Late 2012 Mac mini because it isn't compatible with 1600 MHz RAM. If you try to install it, the Mac mini won't boot.
In your case, if you want more memory for the Mid 2010 Mac mini, you have to buy memory that meets the requirements of the Mid 2010 Mac mini in OWC or Crucial > http://eshop.macsales.com/shop/memory/Apple_Mac_mini/DDR3 Then, you have the steps to install the RAM in the first page I gave you

Can I use RAM from "old" MIni in an Intel Mini?

Subject line pretty much says it all. I have two 1GB card from two "old" Minis that I'd like to install into each of the two slots of an Intel Mini that has 512 MB.
Are they compatible?
Thanks,
GeeKay

Thanks, GeeKay; sorry it wasn't better news. If you ever need a good reference for which RAM works with which Macs, this is a good place:
http://www.datamem.com/apple-memory.asp
K. Moett
PowerBook G4 (15 FW800); 17 iMac G5; Mac mini 1.42 Mac OS X (10.4.6)

Can I use RAM from my PC laptop in a Mac?

I am getting rid of one of my PC laptops that currently has 16gb of RAM in it. DDR3, 1600. Is it possible to
have that RAM installed in my late 2012 iMac? I have heard that some Macs use compatible RAM.
If not in the iMac, could it be installed in our 2012 Macbook 13"?

Unless the specifications of the RAM are identical to what the Mac asks for the answer is NO! Purchase RAM only from Crucial (directly from their on-line store) or OWC at www.macsales.com.

How can I stop pages from wanting to make every document into an outline?

Every time I try to create a document in Pages, it insists in turning it into an outline. How do I type a staright document?

Have you tried starting from a different template?
As far as I can tell the Outline setting is contained in the document, so this should only happen if you are starting from a template that was saved with Show Document Outline selected.

How can I stop URL from loading when I paste it into a page without selecting a text field first?

I'm using a chat where I often copy links; if I forget to click the text field when copying an URL, it opens, forcing me to go back manually, which is really annoying. Can I disable URL autoopening somehow?

It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

Can't remove apps from my 5s when its plugged into itunes

So I did try to search before so that this wouldn't be a duplicate. I know how to close open apps. Thats not the question. I have a ton of apps. And now I'm cleaning up my phone and want to take apps off my phone that I no longer use. Except I can't do it on this phone. I switched from my 4 about two weeks ago. Since the "x" didn't pop up on apps anymore, I knew that I could connect my phone to ituens and in the iphone screen remove/install apps as I pleased then sync to apply changes.
When I try to do that on this phone, it shows the install button for all the apps that I don't have on my phone. But for all the one currently installed the "remove" button is grayed out. I can't click it. Holding the apps on my phone makes them jiggle, but there is no "x" to remove them.
Anyone have any ideas whats going on?
Thanks

So simple. Yet I didn't explore that deep. Assumed it was like my old phone. My bad. Thanks.

How can download the roles from one system and upload them into another ??

Do anyone have the solution ..... ......it very important.

Hi,
Visit [Role Maintenance Functions|http://help.sap.com/saphelp_nw04/helpdata/en/e4/15e48efd6c11d296430000e82de14a/content.htm] in section Download/Upload.
To avoid inconsistencies, all roles from which a role is derived are also downloaded. When you download composite roles, all the roles which they contain are also downloaded.
When you upload a role, all role data, including authorization data is uploaded from a file into the SAP system. The user assignments for the role and the generated profiles for the role are exceptions in this case. You must therefore regenerate the authorization profiles after the upload.
Mass Download:
Save several roles on the PC.
You can choose on the selection screen whether you:
Also want to transport the single roles contained in the selected composite roles (Customizing switch ADD_COMPOSITE_ROLES in table SSM_CUST)
Also want to transport the generated profiles for all single roles (PROFILE_TRANSPORT in table PRGN_CUST)
You can define the default setting for both options using the value in the Customizing switch. If you explicitly set a switch to NO, the option in question on the selection screen is not active. Otherwise, it is active.
Regards,
Srilatha.

Can I swap ram from a Powermac G4 400 PCI into a Powermac G4 Quicksilver?

Similar Messages

Maybe you are looking for