Can I switch Can I switch Can I switch between rad and deg and grad

Hi i want to switch between rad, deg, and grad in numbers

If you purchased it within the last 14 days you can return it for a full refund and then purchase the 5G. Otherwise Apple will only give you a 10% recycling discount if you turn in an old iPod and purchase a new one.

Similar Messages

HT1305 how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

Ok, I saw that error in your logic. A Dual G5 2.3 or even a Dual Core 2.3 does NOT use LCS at all. Its air cooled and if anything if the OP is experiencing this problems could be due to possible heatsink paste drying up. He might have to re-apply MX 7 or Arctic Silver.
The only G5's that use LCS are: G5 dual 2.5 from Late 2004, the G5 Dual 2.7 from Early 2005, and lastly the G5 Quad-Core from Late 2005-end of September 2006.
Hope this helps.

How can I make a gradient like this? (Edge between colors is hard, and bends)

I'm using Illustrator CS5
Looking to make a gradient similar to the one in the "BubbleBoddy" font here -
What's the smartest way to go about doing this? I have a basic understanding of gradients, but I have no idea how to get the gradient line to bend like that, or how to get such a "hard edge" between the light and dark pink.
Any help is greatly appreciated! Thank you!

draw a curve, copy it, colour it, blend 'em (alt + ctrl + B or Object > Blend > Make
then use your text as a mask.

Can my macbook pro mid 2007 3.1 AA896ll/a handle a SSD and how do I make the switch. Can I do a clean install of Snow Leopard from an original cd

Here is my problem, I want to upgrade my macbook pro mid 2007 3.1 AA896ll/a to an Solid State Drive, a Crucial m4 256 gb, I want to know if the macbook will be able to handle it and how do I do the switch. also once I install the drive will I be able to boot from my Snow Leoard original cd and do a clean install. Thank you

Coming from a 5,400 RPM drive that's nearly filled up, fragmented and deoptimized to a fresh install of OS X on a SSD will of course be a improvement.
However fresh installing OS X on a new 5,400 RPM will also see a improvement, boot up in 30 seconds.
A fresh install of OS X on a new 7,200 RPM drive will also see a improvement, boot up in 25 seconds.
A fresh install of OS X on a new SSD will see the best improvement, boot up in 20 seconds on fast SATA connections.
OS X still requires time to setup and that takes about 20 seconds despite how fast your boot drive is, that's why sleep was created.
Things to consider: The higher cost of a SSD, the limiting capacity (hard drives hold way more up), the SATA I speed limitations (slows up on large file transfers), the difficulty to scrub the SSD of unwanted data (like you can a hard drive), and it's limited write capability. Also the smaller SSD's are faster than the larger ones.
SSD's are shock proof, which is their slight advantage over hard drives.
I see a 120GB SSD in a SATA I machine as being a waste, it's too small of a storage space (500GB+ is ideal), the SATA I connection is slow and other factors that make a 7,200 RPM drive a better option in that machine.
One can get a 750 GB 7,200 RPM hard drive for about the same price and still maximize their boot time in the process, also being able to scrub their drive of unwanted data easily.
SSD's can't be scrubbed, one has to fill 50% of the remaining space with many, very small files to overwrite the free space, then do another 50% again to defeat the Trim/wear leveling as SSD's write to less used location each time. If one fills a OS X boot drive up completely, it won't function or won't boot up.
If you do this fill routine regularly with software, then you prematurely wear out the SSD as it has limited writes. Why Disk Utility doesn't offer zero or 7x erase for SSD's.
If your in the 10% of Internet traffic that's going to adult sites, then the ability to scrub the caches and storage drive of embarrassing unwanted data is a necessity. Especially in the light of software and hardware that can read the SSD of deleted data.
Trick links and redirects on poisoned sites can firebomb your Mac with some pretty bad pictures and your hidden caches as well, especially if you don't like to pay.
IT personal have at their disposal free open source forensic software that basically aggregates all the past behavior done on the machine into a nice, easy to view format with times, dates and when and where content was downloaded from.
Since one has to give up their password for repair folks to recover data and fix the machine...
I think a SSD is less of a benefit over a 7,200 hard drive for that particular model of Mac for a mere few seconds faster boot time.

I have an iphone 4 for verizon and i am going to switch phones and get a droid motorolla 4g phone and the droid doesnt have a sim card. does my iphone 4 have a sim card that i can put in the droid? can i buy sim cards separately online for the droid?

i have an iphone 4 for verizon and i am going to switch phones and get a droid motorolla 4g phone and the droid doesnt have a sim card. does my iphone 4 have a sim card that i can put in the droid? can i buy sim cards separately online for the droid?

Brandon2184 wrote:
The iPhone 4 uses a "Nano SIM"
The CDMA iPhone 4 does not use a SIM at all. There is no SIM slot. It is a pure CDMA phone.

My IPhone can't be switched on nor it can be restarted. I have no idea what happened.

Hey!
I have some huge issues with my Iphone 4. Before I start describing the problems, I shall describe the situation my Iphone has been in.
I bought my Iphone 4 on Aug 2011 in Singapore and it was stolen a few months later(Nov 2011). Fortunately, the police found my phone and returned it to me last month (July 2012). When I got back my phone, my phone was jail-broke. I managed to restore the phone back to its factory settings by doing a hard reset through Itunes.
And now as I am travelling around USA, my phone broke down. It happened after I snapped a photo up on the mountain and my phone just died. What happened was after snapping a photo, I placed it back in my pocket. I took it out again a few minutes later and the screen was black. I tried restarting my phone and there was no response. I was up on the mountain and there was no contact with any water or liquid. I did not drop my phone either and I was stationary after snapping a photo. Could it be the water vapour from the clouds since I was pretty high up the mountain?
Initially, different thoughts came to my mind. I thought it could be the low temperature and the altitude that could cause my phone to not function temporarily. But when I descend from the mountain, my phone did not work still. So I plugged my Iphone to my charger and it switched on. Then on the screen it said Activation required and asked me to plug my phone to Itunes. So I tried plugging it to my laptop and initially the Apple logo appeared and then it disappeared after a few seconds and then came back on again. It has been doing that whenever I connect my phone to my laptop. FYI, my laptop is a Macbook pro. Then I tried disconnecting my phone from my charger and my laptop, and it cant be switched on at all. As i plugged my phone to the charger, my phone switches on and asked for an Activation and then it will stay on the connect to Itunes Screen. The instant I disconnect the charger from my phone, the screen went black.
My concerns now are, 1) What are the procedures if I were to bring my phone to an Apple repair store in USA since I got my Iphone through a contract plan in Singapore? Is there anything I should be aware of? 2)If my phone was jailbreak and I managed to restore to its factory settings, are there still any remnants of the jailbreak software in my phone that could cause the demise of my phone? 3) What exactly happened to my phone? Is it common for Iphones?
I am travelling down to Philadelphia tomorrow. I hope I can find an Apple Store in the vicinity tomorrow. Very frustrated that my Iphone 4 just broke down on me suddenly. Hope someone could help me out here! Thanks!
Cheers!!

Hey!
I have tried holding down the home and power button countless of times. It doesnt respond at all. Plug my phone to a charger and hold down the power button and my phone switched on. But it said Activation Required and said connect to Itunes. As e screen remains on the connect to Itunes screen, I disconnect the charger from my phone and my phone went dead instantly. My battery is full btw. Tried connecting to Itunes through my Macbook Pro but iTunes doesnt detect my device and the apple logo flashes for about a few seconds on my phone and then disappear and then came back on again. My Iphone has been connected to my laptop for about 30 mins and the apple logo has been coming on and off for 30 minutes now and Itunes has not detect my device yet.
SIGHHH.

How can I connect airport extremes using a wired-switch connection and have roaming capability?

My goal is to have 2 airport extremes and 1 timecapule connected via an ethernet switch so that I can enable roaming. I have no problems connecting them wirelessly where I create the wireless network on a primary airport wireless then add the others "extending" the network. However, if I attempt to do the same thing with a wired connection everything stops working (no connections from any airport). Here's the topology I'm trying to achieve. I believe my problem relates to the switch and the fact that I am serving up DHCP from a separate server. Is there a way I can achieve this (or similar) type of configuration? Thanks in advance.
BTW, I have read the various documents on the roaming network topology but none seem to be a match to this.

To answer your question, yes, if I _only_ have the main "create wireless network" airport connected/wired to the switch, everything works correctly.
OK, got that.
Also, if I have each of the 3 airports/timecapsule "create wireless network" using the same ssid name and passwd/protocol, everything works correctly (but of course, no roaming under this scenario
Sorry, you have me confused on this one. When the AirPorts are all configured to "create a wireless network", use the same SSID, security and password, and all AirPorts are in Bridge Mode........that is the exact definition of a "roaming" network.
Not sure what you mean when you say "no roaming" in this configuration.
Also, if I have the main "create wireless network" configured and have the 2 other airports "extend the network" and _not_ have them connected via the ethernet cable, everything works correctly (wireless airport interconnection)
That is correct.
However, if I plug the 2 other "extend the network" airports into the switch via ethernet, all connectivity shuts down.
This is not a correct setup. The "extend" setting on the AirPort assumes that they will connect using wireless. If you then try to connect an Ethernet cable to an AirPort that is expecting a wireless connection, that will result in a big feedback loop and effectively crash the network.

I just recently purchased a mini iPad for my child. It was set up in the Apple store with my Apple id. I now want to create an Apple id for my child and switch it over, how can I go about that. I already downloaded some of the games from my account.

I just recently purchased a mini iPad for my child. It was set up in the Apple store with my Apple id. I now want to create an Apple id for my child and switch it over, how can I go about that. I already downloaded some of the games from my account.

With a new account, you'll need to rebuy the games.
Each user should have their own icloud account, otherwise they end up getting the same emails, contacts, calendars, notes, reminders, etc. - usually not what you want. But if all have been sharing the same itunes ID, keep it that way, you can have different IDs for itunes and icloud.
If you already have another icloud account, and want to set it up on a device, then go to Settings>icloud, scroll to bottom of screen and tap Delete Account. This only disconnects the device from that account, no data is lost on icloud. Then enter the account ID that you want to use.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/

I changed my Apple ID, now I can't login to iCloud because it still has my old Apple ID and the password no longer works to log me in. How can I get back into iCloud so that I can switch off Find my iPhone so I can make these changes? Thank you.

I changed my Apple ID, now I can't login to iCloud because it still has my old Apple ID and the password no longer works to log me in. How can I get back into iCloud so that I can switch off Find my iPhone so I can make these changes? Thank you. (iPhone 4s)

Well, you're gonna have to recover the password for that Apple ID:
http://support.apple.com/kb/ht5787

How can I configure a 802.1x in a switch 2960 with IOS 15.0.2?

Hi,
I'm trying to config a switch WS-C2960+24PC-L with IOS 15.0(2)SE5 and C2960-LANBASEK9-M to use 802.1x in my network but when I type the following commands the IOS doesn't recognize the interface commands and I can't complete the settings:
Router# configure terminal
Router(config)# dot1x system-auth-control
Router(config)# aaa new-model
Router(config)# aaa authentication dot1x default group radius
Router(config)# interface fastethernet2/1
Router(config-if)# switchport mode access
Switch(config-if)# authentication port-control auto (or dot1x port-control auto)
Switch(config-if)# authentication host-mode multihost
Router(config-if)# dot1x pae authenticator
Router(config-if)# end
Source: http://www.cisco.com/en/US/docs/ios-xml/ios/sec_usr_8021x/configuration/15-2mt/config-ieee-802x-pba.html#GUID-C11588CB-31B6-4CD9-9E74-CF2199FB1807
I've used the same commands in other switch with IOS 12.x and I don't have any problem to complete the settings so.... somebody know if:
* Should I use others commands to activate this feature in this IOS?
* Do I need to use other IOS?
Thanks in advance,

The authentication manager commands in Cisco IOS Release 12.2(50)SE or later
The equivalent 802.1x commands in Cisco IOS Release 12.2(46)SE and earlier
Description
authentication control-direction { both | in}
dot1x control-direction { both | in}
Enable 802.1x authentication with the wake-on-LAN (WoL) feature, and configure the port control as unidirectional or bidirectional.
authentication event
dot1x auth-fail vlan
dot1x critical (interface configuration)
  dot1x guest-vlan6
Enable the restricted VLAN on a port.
Enable the inaccessible-authentication-bypass feature.
Specify an active VLAN as an 802.1x guest VLAN.
authentication fallback fallback-profile
dot1x fallback fallback-profile
Configure a port to use web authentication as a fallback method for clients that do not support 802.1x authentication.
authentication host-mode [ multi-auth | multi-domain | multi-host | single-host]
dot1x host-mode { single-host | multi-host | multi-domain}
Allow a single host (client) or multiple hosts on an 802.1x-authorized port.
authentication order
mab
Provides the flexibility to define the order of authentication methods to be used.
authentication periodic
dot1x reauthentication
Enable periodic re-authentication of the client.
authentication port-control { auto | force-authorized | force-un authorized}
dot1x port-control { auto | force-authorized | force-unauthorized}
Enable manual control of the authorization state of the port.
authentication timer
dot1x timeout
Set the 802.1x timers.
authentication violation { protect | restrict | shutdown}
dot1x violation-mode { shutdown | restrict | protect}
Configure the violation modes that occur when a new device connects to a port or when a new device connects to a port after the maximum number of devices are connected to that port.
show authentication
show dot1x
Display 802.1x statistics, administrative status, and operational status for the switch or for the specified port. authentication manager: compatibility with earlier 802.1x CLI commands
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/security/configuration_guide/b_sec_152ex_2960-x_cg/b_sec_152ex_2960-x_cg_chapter_010000.html#concept_6275D339A9074AC0BB06F872D7A54FBB

HT4623 after the ios 7.0 update my iphone 4s and ipad keep switching in between the home screen and the apple loading screen, can anybody help?

Can anybody help with the above?
i.e
both my iphone 4s and ipad switch in between the home screen and the apple loading screen
Many thanks

I would connect each device to a power source, and then reset them by holding the power button and the home button until they turn off.
If it keeps happening, I would put the devices in recovery mode and restore them with iTunes.
This article will help with that if needed:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808

My ipad does not appear in itunes. I am OS 10.6, itunes is up to date, I have restarted computer and ipad and switched usb sockets. Dont know if its related, but I can no longer see my sony handycam in imovies too.

My brand new iPad 2 does not appear in iTunes. I am OS 10.6, iTunes is up to date, I have restarted computer and iPad and switched usb sockets. Don't know if its related, but I can no longer see my Sony Handycam in iMovies too.

What content are you wanting to copy of the iPad ? You should be able to copy off anything that you've purchased from Apple (films, music, ibooks, apps etc) by connecting the iPad to your computer's iTunes and doing File > Transfer Purchases. If you want to copy off music copied from your own CDs or purchased from other sites then you will need to find a program for your computer that can copy them off – iTunes won't copy them off.
For photos taken with the iPad, copied to it via the camera connection kit or saved from emails/websites then you should be able to copy them off via the Windows camera wizard.
For photos that were originally synced from a computer you will need a third-party app such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.
Content in third-party apps (documents and files etc) then how you copy that content off will depend upon what the apps that they are in support e.g.either via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc.

HT4898 After switching to icloud I can no longer get my mail on my phone. Any solutions?

After switching to icloud I can no longer get my mail on my phone. Anyone else have this problem and manage to solve it?

clapsmc wrote:
...and when I try to update my system preferences, my mac-book pro won't save my new server settings, despite me hitting save...Rather, it defaults to the previous settings, the ones I know need to be updated. So, I keep receiving this message when trying to access e-mail:
The MobileMe IMAP server “mail.mac.com” rejected the password for user...
Please re-enter your password, or cancel.

Satellite L600: How can I turn off the main Wireless Communication Switch?

Hello! Would be very grateful for any help....after struggling for 3 months I finally signed up here hoping to get some help.
I have a new Satellite L600/ Win7 Home Premium.
My questions is that I can not find where the MAIN wireless switch is in order to turn wireless off COMPLETELY.
Everytime I start up, the wireless (orange) light switches on automatically.
I have to wait till start up finish and manually turn it off by Fn-F8.
When I open ConfigFree, (or Connectivity doctor), the diagnosis on the bottom left says [STATUS" Wireless Communication Switch: ON]
This tells me the main switch is somehow still ON.
I called Toshiba twice and they couldn't find it either.
They said the new versions of BIOS doesn't allow it...? And for this model there is no physical switch built on the PC itself.
I have looked everywhere and did the following:
(1) Disable the adapter from Device manager.
(2) In HWSetup, where there used to be an option to click the wireless switch off, it is not there anymore.
(3) I went into BIOS setup and could find nothing remotely related to wireless/bluetooth to switch.
I'm just wondering why there is a laptop with wireless switch ON permanently? But if it's ON, there must be a way to switch it off. Press Fn-F8 every time on start-up is not a long term solution as risk is I'll forget one day).
As my last laptop was hacked before it is top priority that I know how to turn off ALL wireless function. So even if I have to do it via Commands, I will try it. Also, I'm not sure if anyone else experience the same with this model, or is this a defect in my particular PC?
Any help or same experience will be much appreciated, thank you.
I disabled the adapter in the device manager.
When I open ConfigFree, the Connectivity doctor tells me the Wireless Communication Switch: ON

Hi thanks for your replies! Sorry if I'm slow on the forum, at first I couldn't find where my thread went! Apparently it's moved to under Wireless. Is there alert message to let us know when my question is being moved?
Thanks Paolo30, I am glad to know that Fn-F8 is enough. when I check Network Connections, the Atheros adapter is 'disabled'. Sorry may I ask if WLan card you are talking about in device manager = Atheros adapter? (Despite reading furiously on books to patch up my ignorance on the wireless last few weeks, still not sure the difference between 'adapter' and 'card'... :) Are they the same thing?
Thanks Xardas. I checked the status in device manager and Atheros adapter is 'disabled'. I'm glad to know everything is ok if I see that! :) As my laptop was tampered wirelessly (and I don't know how they did it), I bought a new one and it's important for me to know it's 100% safe. Still, I want to tell Toshiba engineers it would be great to find out where this mysterious Switch is. It's not good to feel there is some sort of wireless capacity always ON and my PC may be emitting some wireless signals for serious baddies?

I dropped my iPhone 4 in water and now it won't turn on at all, will i lose all of my data, for example my photos and messages etc? and is there any way you can back the phone up without having it switched on?

I dropped my iPhone 4 in water and now it won't turn on at all, will i lose all of my data, for example my photos and messages etc? and is there any way you can back the phone up without having it switched on?

If you had previously been backing up to iCloud (or a computer with iTunes), you would possibly have a backup. That said, if you can't turn the phone on, you cannot create a backup of the device now. Sorry.

Can I switch Can I switch Can I switch between rad and deg and grad

Similar Messages

Maybe you are looking for