Can i switch left and right outp

ok, i found 4 old speakers in my basement, and decided to make my closet into a computer room with extreme surround sound. I got my stereo system as well, and made myself a nice little 4.0 setup. (i only found one stereo in my basement, so the front channel has 4 speakers, and the back has the other 2). I bought a sound blaster audigy, and it sounded great.
However, i then noticed my two old desktop speakers, and they still worked great. So, i decided to make a 6.0 setup. However, my closet is really long, and there was no place in the back for a speaker. So, to make a long troubleshoot short, i soldered the lefft speaker wire to an extremely long audio cord and taped the speaker (using monstrous amounts of duct tape) to the wall above the doorframe.
I got it all hooked up, with those 2 new speakers being front center and rear center. I booted up and... ****** BACKWARDS!!!!! The rear center is in the front center spot and vice versa. I was wondering if there was any way to tweak the settings so that you could switch the speaker assignments. Basically, i need to switch the left and right output on only one of three output channels. (im usin the fourth for a mike)
Please tell me anything you know, even if its probably not true or if its risky, i cant switch the speakers because i cant solder the 2-channel output cord to make it longer, and it would kill the wal to rip off all that tape. Thanx.

Try Audio MIDI Setup (Utilities folder. Set "Properties For" to Line Output and click "Configure Speakers".
If that doesn't work, try using Audio Hijack Pro
<http://www.rogueamoeba.com/audiohijackpro/>
It has a "Swap Channels" effect. It is not free, but the free trial should work fine if you are not recording.

Similar Messages

  • How can I separate Left and right audio channels in labview 8.5 tia sal22

    How can I separate Left and right audio channels in labview
    8.5 tia sal22
    Greetings All
    I have a working Labview vi that converts a math formula to an
    audio signal.  I would like to have the
    right and left audio channels playing different math audio signals is this
    possible?
    Example
    Right channel -> plays the audio signal created by a math
    formula
    Left channel -> plays the audio signal created by another
    math formula with adjustable phase control
    I’ve included a VI with a working audio and math formula but
    I’m not sure how to separate the left and right channels.
    I’m using labview 8.5
    I looked up a similar question on the
    support board and it said” use an instance of the the Sound Output Write that
    has a 1D waveform data type input (i.e.  Sound Output Write (DBL)). Each
    element in the array would correspond to a channel.”
    But I’m not exactly sure what he meant.  I’m using a formula to generate the wave file
    Tia sal22
    Attachments:
    fixed mathscript formula to sound test.vi ‏680 KB

    Sorry it took so long to get back.  Here's the new VI with it splitting out the left and right channels. 
    I'm using a Gigaport HD 8 output usb audio device but I'm experience clicks and pops.  I increase the buffers
    but I still get the clicks and pops.  I know gigaport HD can use ASIO drivers which most likely would solve the problem but one needs to code in C for this which I'm not proficient in.  Can someone recommend a work around to prevent this clicks and pops, can I somehow change my VI to fix this? Does anyone have a VI that will allow access to the ASIO latency properties?
    I'm using labview 8.5
    And a gigaport HD which is a USB audio device which outputs 8 analog signals (it is ASIO compatible)
    tia sal22
    Attachments:
    lvt_audio_realtime-out left right device ID test.vi ‏68 KB

  • Can articles swipe left and right?

    Is it possible to have articles swipe left and right instead of just up and down? From what I can see at the moment you swipe up and down in an article (multiple pages of course) and swipe left and right to change articles. I am trying to publish a gardening magazine and it has many 2 page images. When swiping and down they flow poorly.

    Set them to horizontal swipe only in the article properties.
    Bob

  • How can I combine Left and Right audio?

    Hi,
    When I record video, one lapel mic records to the left channel and the other records to the right channel in one audio track. I can't seem to figure out how to combine them within Premiere Pro (I've already attempted searching the forums for more info). I know in Sony Vegas you can right click the single audio track and select "Combine" and it will combine the 2 channels so that when people watch the end product you have both voices coming out of both speakers.
    Any help would be appreciated.
    Thanks
    Kelly G.

    Hello,
    Yes i have the same issue.
    I use the duplicate Audio track and fill left and right all the time.
    when i am doing Interview videos i usually have one person on channel 1 and the other on channel 2 and it comes out as L and R in Premiere.
    Today i was shooting with myself on Channel 2 and a shotgun for some ambient sound on channel 1.
    In Vegas or FCP 7 there is a simple effect to drag and drop called " Combine" that nicely combines the L and R channels each into stereo.
    I used to use it quite a bit and think it would be a great addition to Premiere Pro.
    So i am wondering several years since this was first post if Premiere does in fact now have this option...and where it might be that i over looked it?
    If not.....is there an easier way to do this than the fill left and right method?
    Thanks so Much!
    Mark

  • How can I write left and right in the same line of a richtextbox?

    I want to write, in the same line, text with a right aligment and other with left aligment. How can I do it?
    thanks

    I want to write, in the same line, text with a right aligment and other with left aligment. How can I do it?
    thanks
    As
    Viorel_ says "Perhaps there are other much easier solutions. For example, create two
    RichTextBoxes with no borders (if you only need two columns of text)" but the real issue would be saving the info in the RichTextBox's (RTB's) RTF or Text to two different RTF or TextFiles. Although I suppose if it was just going to
    a TextFile then you could somehow use a delimited text file so each same line number of each RTB is appended to the same line and delimited. That way you could probably load a split array with each line from the text file splitting on the delimeter per line
    and providing RTB1 with index 0 of the split array and RTB2 with index 1 of the split array. I'm not going to try that.
    This is some leftover code from a long time ago. It has three RTB's. RTB1 is there I suppose because the thread asking for this code wanted it. RTB2 is borderless as well as RTB3. The Aqua control in the top image below is the Panel used to cover RTB2's
    scrollbar. So RTB3's scrollbar is used to scroll both controls.
    I forgot to test if I typed past the scroll position in RTB2 if both would scroll as maybe RTB3 would not since it would not have anything to scroll to I suppose.
    Maybe this code can help or maybe not. The bottom two images are the app running and displaying nothing scrolled in RTB2 and RTB3 then the scroll used in the bottom image.
    Disregard the commented out code in the code below. It was there so I left it there. I suppose you should delete it. Also I didn't set the RTB's so one was left aligned and the other right aligned. I believe the Panel becomes a control in RTB2's controls
    when it is moved to cover RTB2's vertical scrollbar but don't remember although that seems the case since both RTB2 and RTB3 are brought to front so if the Panel was not one of RTB2's controls I would think it would be behind RTB2 and RTB2's vertical scrollbar
    would display but don't remember now. In fact I don't really remember how that part works. :)
    Option Strict On
    Public Class Form1
    Declare Function SendMessage Lib "user32.dll" Alias "SendMessageW" (ByVal hWnd As IntPtr, ByVal msg As Integer, ByVal wParam As Integer, ByRef lParam As Point) As Integer
    Const WM_USER As Integer = &H400
    Const EM_GETSCROLLPOS As Integer = WM_USER + 221
    Const EM_SETSCROLLPOS As Integer = WM_USER + 222
    Dim FixTheProblem As New List(Of String)
    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
    Me.CenterToScreen()
    Panel1.BackColor = Color.White
    Panel1.BorderStyle = BorderStyle.Fixed3D
    RichTextBox2.BorderStyle = BorderStyle.None
    RichTextBox2.ScrollBars = RichTextBoxScrollBars.Vertical
    RichTextBox3.BorderStyle = BorderStyle.None
    RichTextBox3.ScrollBars = RichTextBoxScrollBars.Vertical
    RichTextBox3.Size = RichTextBox2.Size
    RichTextBox3.Top = RichTextBox2.Top
    RichTextBox3.Left = RichTextBox2.Right - 20
    Panel1.Size = New Size(RichTextBox2.Width * 2 - 16, RichTextBox2.Height + 4)
    Panel1.Left = RichTextBox2.Left - 2
    Panel1.Top = RichTextBox2.Top - 2
    RichTextBox2.BringToFront()
    RichTextBox3.BringToFront()
    FixTheProblem.Add("Curry: £6.50")
    FixTheProblem.Add("Mineral Water: £4.50")
    FixTheProblem.Add("Crisp Packet: £3.60")
    FixTheProblem.Add("Sweat Tea: £2.23")
    FixTheProblem.Add("Motor Oil: £12.50")
    FixTheProblem.Add("Coca Cola: £.75")
    FixTheProblem.Add("Petrol Liter: £3.75")
    FixTheProblem.Add("Shaved Ice: £.50")
    FixTheProblem.Add("Marlboro: £2.20")
    FixTheProblem.Add("Newspaper: £.25")
    FixTheProblem.Add("Spice Pack: £.75")
    FixTheProblem.Add("Salt: £.50")
    FixTheProblem.Add("Pepper: £.30")
    For Each Item In FixTheProblem
    RichTextBox1.AppendText(Item & vbCrLf)
    Next
    RichTextBox1.SelectionStart = 0
    RichTextBox1.ScrollToCaret()
    Dim Fix As String = ""
    For Each Item In FixTheProblem
    Fix += Item.Replace(":", "^:") & vbCrLf
    Next
    Fix = Fix.Replace(vbCrLf, "^>")
    Dim FixSplit() As String = Fix.Split("^"c)
    For i = 0 To FixSplit.Count - 1
    If CBool(i Mod 2 = 0) = True Then
    RichTextBox2.AppendText(FixSplit(i).Replace(">"c, "") & vbCrLf)
    ElseIf CBool(i Mod 2 = 0) = False Then
    RichTextBox3.AppendText(FixSplit(i) & vbCrLf)
    End If
    Next
    End Sub
    Dim RTB2ScrollPoint As Point
    Private Sub RichTextBox2_Vscroll(sender As Object, e As EventArgs) Handles RichTextBox2.VScroll
    Dim RTB2ScrollPoint As Point
    SendMessage(RichTextBox2.Handle, EM_GETSCROLLPOS, 0, RTB2ScrollPoint)
    SendMessage(RichTextBox3.Handle, EM_SETSCROLLPOS, 0, New Point(RTB2ScrollPoint.X, RTB2ScrollPoint.Y))
    'Me.Text = RTB2ScrollPoint.X.ToString & " .. " & RTB2ScrollPoint.Y.ToString
    End Sub
    Private Sub RichTextBox3_Vscroll(sender As Object, e As EventArgs) Handles RichTextBox3.VScroll
    Dim RTB3ScrollPoint As Point
    SendMessage(RichTextBox3.Handle, EM_GETSCROLLPOS, 0, RTB3ScrollPoint)
    SendMessage(RichTextBox2.Handle, EM_SETSCROLLPOS, 0, New Point(RTB3ScrollPoint.X, RTB3ScrollPoint.Y))
    'SendMessage(RichTextBox2.Handle, EM_SETSCROLLPOS, 0, New Point(0, 10))
    End Sub
    End Class
    La vida loca

  • Switching Left and Right stereo tracks

    I have a stereo audio recording that needs the left channel switch to the right and right switch to the left. Is there an easy way to do this?

    I think I found the solution by using the "Direction Mixer" plugin.

  • How can I keep left- and right-aligned paragraphs together on the same line?

    I am currently trying to typeset a menu. Basically, I want the Dish Title to be left-aligned and the Price right-aligned — but on the same line. I can achieve the effect by typing in a shift+tab after the Dish Title text and then inserting the price, but I would rather have two distinct paragraphs styles, so that I can adjust them globally to see what looks good. I can achieve the effect by adjusting the Price character baseline of the price and moving it up, but then if I need to make any price changes, I find it a pain trying to get the cursor in the right place in situations where a baseline is substantially altered.
    Back in the old days (in Ventura!!), I could just remove the line break after the "Dish Title" style and the "Price" would move up to the same line, but I can't seem to be able to do this in CS6.
    Any ideas?

    Please show some examples. It's easier to help you.
    If I understand right, use a paragraph style with a right aligned tab and nested styles and grep styles. That's extremly flexible.
    Have fun

  • How can I connect left and right RCA audio jacks to my iMac to record?

    I would like to connect my Tascam 8-track digital recorder to the iMac. The Tascam stereo output is L/R RCA jacks. Is there a chord that is Stereo L/R RCA male jacks on one end and a USB or Thunderbolt jack on the other side?
    Thanks much,
    John

    NYCteacherR wrote:
    I'm new to this this forum and new to Apple Computers. I hope you don't work for Apple as a moderator, because your attitude is sarcastic and unhelpful.
    So, I'll tell you what, don't bother responding to any of my posts in the future.
    None of us are moderators -- they seldom post anything but when they do you will know it because they have special avatars nobody else can use. As for the "unhelpful" remark, please read the "How to write a good question" info that appears on the page where you type the summary of your question. That explains the importance of including details in your summary -- without them we have no way of knowing what might be helpful & what would just waste our time & yours, or even cause you needless expense or problems with your Mac.
    Also, please be aware that even though you asked the question, in the future other users looking for similar answers may read this discussion, so by providing enough info for anyone to tell if what is discussed here is relevant to them, you can help other users too.

  • Panning / left and right switched

    Hi all,
    I know it seems rather silly, but my left and right seem to be switched and I don't know how to solve it. I use a Presonus Firestudio Mobile, that is FireWire connected, I connect my headphones to the card's hp-output, so there's no cables to switch...
    Anyone got a suggestion other than "Get used to it"?
    thnx,
    eltho

    Hi,
    get used to using the Gain Plugin. There you can swap L/R if you have to. But there's also the possibility that your headphones are wrong cabled. You should cross-check this.
    Fox

  • Why Left and Right Joins if only one of them can serve the same purpose?

    I understand that left join is used to display all the records from left table whereas the right join is used to display all the records from right table in a join.
    However, if we switch the positions of the join tables and perform left join we can get all the records of the left table.
    A left join B -> will give all records from A
    A right join B ->will give all records from B
    B left join A -> will again give all records from B.
    The order in which the data is displayed(ie the field order) can also be maintained in the SELECT clause.
    So, Why do we have left and right joins separately in existance, when only one of them can serve the same purpose?

    Hi,
    I think it's because it is sometime more natural to outer join on left or right.
    In your data model (or the query you are writing), there is some kind of hierarchy between tables : I feel more natural to have the table with lowest hierarchical level (the root table) on the left. So I sometimes prefer to right outer join...
    This is a very personal feeling, I must admit.
    To me what is strange is to have chosen left and right as they refer to a "latin" reading direction => forward join and backward join would be more meaningful for people that read from right to left.
    +And I prefer the new joining syntax that doesn't us the {noformat}(+){noformat} sign...+

  • I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

    I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

    Your TV hasn't entered some odd picture in picture mode has it with  two 'inputs' side by side?
    AC

  • Can i turn down front left and right using ddts decoder with the g500

    hi want to get ddts 100 decoder for my gigaworks g500.when im watching a move i have to have it up on about 2.7 bars.to hear the center speaker then the action is to louad.i can turn down center and rear and sub but no front left and right.can you turn down front left and right using the decoder.do you still have to use the controll pod for the gigaworks if i had the decoder in or do u use the decoder to turn it up thanks plz help.

    System Preference > Accessibility
    Select   Mouse & Trackpad  in the left side box.
    Double-click speed 
    Make it slower by dragging the pointer to the left.
    Best.

  • The three finger swipe left and right does not seem to work

    Hi
    I have been trying to do the left and right three finger swipe that allows you to move between applications to no avail.  It just keeps switching between dashboard and one app even if I have 5 apps open at the same time. Snow Leopard has this feature where all the apps opened are shown when you do the swipe and you can choose the one you want.  I think this is better but it doesn't work.
    Any help will be appreciated.
    Antonio

    Such spaces actually use very little extra memory relative to the apps you have open to occupy those spaces. I would go out on a limb and say it doesn't matter whether you have one space for every application or all on the same desktop.
    The limitation will come from the applications and the data you are crunching on them.
    (But that's just a personal view, haven't run into any limits on my ow 4GB Macbook Pro so far)

  • Surround- left and right gone...please help

    When I switch my tracks over to surround... L and R (1+2) are gone! i can sweep the dot around the surround and hear all the channels except for left and right...
    but in stereo mode they work fine...
    help!

    Thank you. Before I tried to go this route, I restarted the computer. That took care of the back and forward problems, but the bookmarks were still missing. I went into Time Machine and restored the application settings folder from 2 days ago. Now everything seems to work fine. If it decides to be a problem in the next couple of days, I will go this route.
    Thanks again for your response.

  • I would like to transfer old reel-to-reel tapes to an iMac. There are different recordings on the left and right channel of the tapes. When I connect the tape deck to the Mac, I get one recording on the left, the other on the right speaker. What to do?

    I was about to transfer some music from a reel-to-reel machione to my Mac. There are different sound recordings on the left and right channels. When I connect with RCA cables and Y-connector, I hear one recording from the left speaker, another from the right side. How do I record only one side, but hear it from both speakers?
    Detlef

    You don't say what end, or connectors are plugged into what. I'm assuming the RCA connectors are on the reel-to-reel end. Since the tape has two different mono recordings, one on each track, you of course only want one at a time during playback. Otherwise, the Mac (or any recording setup) can only treat it as a stereo recording with the standard Left-Right tracks.
    1)  There are multiple ways to connect different types of cables to get a mono signal down to a stereo output at the Mac. Here's one way.
    2) Plug any RCA cable (single cable or stereo) into only the right or left RCA output of the reel-to-reel.
    3) On the other end of the RCA cable, plug in an adapter like this. That will feed the single RCA output into a mono 1/8" plug.
    4) Then plug that adapter into this. That turns the 1/8" mono signal into a "stereo" output with the same single track audio being fed to the Mac on both the left and right channels.
    5) Record either the left or right output of the reel-to-reel. Rewind the tape and switch the RCA connector on the reel-to-reel to the right channel (if you started with the left) and record that mono signal as stereo.
    Or, avoid all of this hardware mumbo-jumbo in the first place and do this:
    1) Record the audio just the way you have it. Two different recordings, one on each channel.
    2) Copy the audio recording to a new name and open it in your editor.
    3) Highlight the left track and copy/paste it into the right track. Presto! Mono recording of the left track on both channels. Save the recording.
    4) Repeat, only copy/pasting the right track into the left track and save the second recording.

Maybe you are looking for