Can I switch to 3G connection with my Lumia 925?
Lumia 925 no connection to 3g
Moderator's note: We amended the title of this post as we moved it to the most appropriate board.
Which network operator do you use, in which country?
Do you use a cut SIM or an original Micro-SIM?
Similar Messages
-
Hello,
I have an Spanning tree problem when i conect 2 links from Switch DELL M6220 (there are blades to virtual machines too) to 2 links towards 2 switches CISCO 3750 connected with an stack (behavior like one switch for redundancy, with one IP of management)
In dell virtual machine is Spanning tree rapid stp, and in 3750 is Spanning tree mode pvst, cisco says that this is not important, only is longer time to create the tree.
I dont know but do you like this solutions i want to try on sunday?:
Could Spanning tree needs to work to send one native vlan to negociate the bdpus? switchport trunk native vlan 250
Is it better to put spanning-tree guard root in both 3750 in the ports to mitigate DELL to be root in Spanning Tree?
Is it better to put spanning- tree port-priority in the ports of Swicht Dell?
¿could you help me to control the root? ¿Do you think its better another solution? thanks!
CONFIG WITH PROBLEM
======================
3750: (the 2 ports are of 2 switches 3750s conected with a stack cable, in a show run you can see this)
interface GigabitEthernet2/0/28
description VIRTUAL SNMP2
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 4,13,88,250
switchport mode trunk
switchport nonegotiate
logging event trunk-status
shutdown
interface GigabitEthernet1/0/43
description VIRTUAL SNMP1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 4,13,88,250
switchport mode trunk
switchport nonegotiate
shutdown
DELL M6220: (its only one swith)
interface Gi3/0/19
switchport mode trunk
switchport trunk allowed vlan 4,13,88,250
exit
interface Gi4/0/19
switchport mode trunk
switchport trunk allowed vlan 4,13,88,250
exitF.Y.I for catylyst heroes - here is the equivalent config for SG-300 - Vlan1 is required on the allowed list on the catylyst side (3xxx/4xxx/6xxx)
In this example:
VLANS - Voice on 188, data on 57, management on 56.
conf t
hostname XXX-VOICE-SWXX
no passwords complexity enable
username xxxx priv 15 password XXXXX
enable password xxxxxx
ip ssh server
ip telnet server
crypto key generate rsa
macro auto disabled
voice vlan state auto-enabled !(otherwise one switch controls your voice vlan….)
vlan 56,57,188
voice vlan id 188
int vlan 56
ip address 10.230.56.12 255.255.255.0
int vlan1
no ip add dhcp
ip default-gateway 10.230.56.1
interface range GE1 - 2
switchport mode trunk
channel-group 1 mode auto
int range fa1 - 24
switchport mode trunk
switchport trunk allowed vlan add 188
switchport trunk native vlan 57
qos advanced
qos advanced ports-trusted
exit
int Po1
switchport trunk allowed vlan add 56,57,188
switchport trunk native vlan 1
do sh interfaces switchport po1
!CATYLYST SIDE
!Must Explicitly allow VLan1, this is not normal for catalysts - or spanning tree will not work ! Even though it’s the native vlan on both sides.
interface Port-channel1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,56,57,189
switchport mode trunk -
How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.
Check for Updates.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/78d42b19fa42e8d83b5 5a65e1333373f_zpsf58bbe10.jpg -
I have downloaded the Apple Remote App to my phone (3gs) can't get it to connect with my iTunes library?
http://support.apple.com/kb/TS1741
-
How can i fix my wifi connection with my router
how can i fix my wifi connection with my router?
I think I'm having a similar problem, my wifi disconnects when a bluetooth device is connected to the MBA.
I have a MacBook Air (13-inch, Mid 2012) with WiFi and Apple Trackpad. I'm unable to use the trackpad(bluetooth) and wifi at the same time. If I turn off the trackpad then the wifi works fine and if I shutoff the wifi then the trackpad works fine. This configuration was working fine prior to upgrading to Yosemite.
I experienced the same problem at home and at the office.
Additional test:
I turned off the bluetooth trackpad and connected my bluetooth headphones to the MBA. The wifi disconnected as soon as I paired the headphones with the MBA.
I have had no problems with the MBA's keyboard or integrated trackpad.
Rick -
Old ipod, can not get it to connect with itunes & i no longer have the computer it was once synced to. It will not allow me to do anything but turn it off & on.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
HT5457 Can i switch an iphone 4 with the iphone 4s that my wife has?
Can i switch an iphone 4 with the iphone 4s that my wife has?
You'll have to create separate user accounts to keep your iTunes libraries separate.
How to use multiple iPods, iPads, or iPhones with one computer: http://support.apple.com/kb/HT1495 -
How can i switch my att wifi with time capsule
how can i switch my att wifi with time capsule
Sorry I have no idea what you mean.. switch off, switch on, swap over.
Bridge the TC and use same ssid (wireless name), security but different channels..
Or just turn it off.
Please write a question that is a sentence and has sense. -
Can't establish a sftp connection with the finder
Hi, I'm trying to establish a sftp connection with the finder (using the "Connect to server" feature) between my (recently purchased) Mac Mini (mid 2011: i5, 2.3 GHz, 2 GB, running 10.7.3) and a Debian Testing box and I can't, I get the following error:
'There was a problem connecting to the server "ip.address"
This file server will not allow any additional users to log on. Try to connect again later.'
However if I try establishing a connection from the terminal (either ssh or sftp) it works flawlessly:
SSH:
victoria:~ RonIn$ ssh [email protected]
[email protected]'s password:
Linux clementine 3.0.0-1-486 #1 Sat Aug 27 15:56:48 UTC 2011 i686
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
You have new mail.
Last login: Sat Apr 28 21:52:18 2012 from ukamy.local
ronin@clementine:~$
SFTP:
victoria:~ RonIn$ sftp [email protected]
[email protected]'s password:
Connected to ip.address.
sftp>
I've searched for a fix or alternative on the internet and I haven't found one that works; The one that keeps coming up is to try: "ftps" as the protocol instead of "sftp" with the remaining information the same (it doesn't work, it gets the same error message afterwards).
The IP address and login information works (corroborated by the fact that I can log in from the terminal from the Mac Mini) so the only issue is with the finder capabilities for establishing the connection. I have looked for apple related documentation or How Tos but I haven't found anything useful.
I don't want to use any third party app or tweak because of the sensitive information that is going to be transfered, I would like to be using strictly the tools from the OS.
If you need any more information please let me know, any help is deeply appreciated.I have the same issue although i kind of fixed it. I have two admin accounts and one of the account's safari did the same thing as yours, except, it was the startpage and everypage i tried to visit. I reseted safari, as in the erase all data safari in the toolbar, safari-Reset Safari... But safari still didn't work. I logged out and went to my other account and opened safari. Now it works fine on both accounts. This meant safari had to logout before actually working better. I have this a few times these days.
-
This is what i encountered with my nokia Lumia 925 after 3 days of usage, i am not sure anyone besides me, facing the same problem.
- Overheating, after taking few photos, the phone feel a sudden of heat near the camera.
- Freeze, the phone freeze sometimes, and auto turn off the wifi, when you open it, it says you need to restart the phone, before can turn on the wifi.
- Music + videos apps, when you swipe your music in the apps, the apps freezes, but music still playing. Frustrated when you trying to change tracks.
- Video, i transfer some of my video via windows 8 to the phone, some of it lagging while playing the video. i have try numerous video format, it is still the same. I think it is a software problem. It works fine on my old lumia.
- Auto reboot, my phone has been reboot for 2 times, one time is after a called,another one is after i finish using my wechat application.
Lastly, i love lumia 925, i think the design and the pictures capability are what i really in love with, but i hope someone from nokia could tell me how to solve the above problems.Hi, Di_vico. Does this mean you are not using the case anymore? Do you have a Lumia 925 as well?
As the concern is present with a case on, try doing the below steps. Let's check if these will correct it.
1. Press and hold the volume down and the power buttons at the same time until you feel a vibration (about 10-15 seconds). Your phone will restart automatically.
http://www.windowsphone.com/en-ph/how-to/wp8/phones-and-hardware/restart-my-phone
2. Check that your device is running the latest software version. Go to Settings > phone update.
http://www.windowsphone.com/en-ph/how-to/wp8/basics/how-do-i-update-my-phone-software
Make sure that all the system apps are updated. You can go to Settings > applications > store > check for updates. You can also scan the QR codes from the below link:
http://discussions.nokia.com/t5/Pool-of-Knowledge/Nokia-Windows-Phone-8-App-Updates/td-p/1640082
Keep us posted. -
How to find which port on the switch that it connected with Mac address?
Hi,
I am trying to find which port of the switches it connected to thru mac-address?
I am able to get the mac-address from the ip address when i do
"show ip dhcp binding snooping" at the core switch.
But when I move on to the Edge switch to check which PC with this Mac address connected to the port,i returned with no result.(onli trunk port result)
I use sh ip arp | inc 000d.60cb.445d
but didn't give me which port it connected to.
How to solve this problem?
thanks!
KLHi KL,
If you are already on the edge switch you can run a command "sh mac-address-table address " and it will give you the port number.
Incase you get a port which is a trunk port that means the end device does not exist on this switch and exist on some downstream switch. So you can just find out the ip address of the downstream switch with "sh cdp neigh detail" command and connect to that downstream switch and then again issue the command "sh mac-address-table address " and check the port number and follow the above steps till the time you get the switch on whcih end host is connected.
HTH, if yes please rate the post.
Ankur -
Why can't my spotify account connect with Facebook?
Cannot connect to my Facebook??
Hey,
Thanks for getitng in touch with us!
When attempting to connect your account to Facebook, are you recieivng any particular error messages? If so, could you provide us a screenshot of what you're seeing. I'd love to take a look into this for you.
Also, to check, are you following these steps?
Let me know, I'm sure I can get this sorted out with you.
Jason -
Can't setup correctly VPN connection with certificate
First of all: the VPN connection to a Windows server I'm trying to setup in Mac OS X works perfectly with a Windows XP client.
The VPN is of L2TP over IPSEC type and uses a certificate for computer authentication. I've tried to setup the connection on my mac importing the certificate on Keychain and marking the certificate as trusted for every use. I've set up the VPN in System preferences - Network creating a new VPN connection and filling: server address, account name, password for user authentication and selecting the certificate for computer authentication in the "Authentication settings" section. Then I've clicked Apply.
Then, when I click Connect the mac answers with a message something like this (I'm going to translate from the italian message), titled "Internet connection": "The IPSec shared secret is missing. Verify settings and retry.".
So, what's happened? Why mac says me that the "shared secret is missing" while I've never set up that option but instead I've selected the "Certificate" radio button in "Computer authentication" section of "Authentication settings" and correctly selected the imported certificate? The strange thing is that verifying what I've set up in the VPN configuration I've found that the active radio button in "Authentication settings" was the one corresponding to "Shared secret", not the one of "Certificate". It seems that when clicking on Apply the mac doesn't stores the certificate choice but resets the choice to "Shared secret".
Anyone has some suggestions to resolve my problem?
Thank youto run IKEv2 you need the following EKUs on both server and client certificates. The machines select certificates automatically, the best option is the a), if not present, they proceed to the next b) and c):
a)IPSec IKE
Intermediate (IPSec Protection)
1.3.6.1.5.5.8.2.2 + Server Authentication +
Client Authentication
b)IPSec IKE Intermediate +
Client Authentication
c)Client Authentication
As you may see, both client and server require Client Authentication EKU in the certificate. If you include Server Authentication and IKE Intermediate, you will get more exact match.
ondrej.
Hi ondrej,
Thanks for the reply. I've reissued the certificate with the Client Authentication EKU, but it hasn't made any difference.
Please note that I'm not using machine certificates on the client for authentication - I want to use Secure Password (EAP-MSCHAPv2), which is working when I connect through SSTP. However, the server seems to be determined to use certificates for client authentication
- when I log using wfp, in the wfpdiag.xml file I can see that the authentication method listed is <mmAuthMethod>IKEEXT_CERTIFICATE</mmAuthMethod>. As I understand it, this should not be the case.
How can I get the server to accept EAP-MSCHAPv2 authentication?
Thanks,
Andrew -
I can't get a 3G connection with iPad. ITunes account pb?
Hi all,
Since I bought my IPad (a good while ago) I have never been able to use it with the 3G connection (WiFi is fine). Tried many things with my provider (Orange UK) and Apple but none worked. Before I take it back to an Apple Store, I was wondering if the reason might be the following: I have bought it in the UK, am using it in the UK, the SIM number is a UK mobile number BUT I have registered the IPad, synchronised it etc with my french ITunes account. Could it be the reason it's not working?
Thanks for any help with this
Kind regards
VincentI have a 3G signal (on my BlackBerry), but no data is flowing. 6 different email accounts, 5 are POP, one is Enterprise/BES. I can send, but I am not receiving. Last message received around 2:00 Central Time.
-
Can i share my wifi connection with my pc?
i googled that so much but can't find. i know jouiku, i need wlan hotpot, not 3g.
A) Do you want to use your Nokia as Wi-Fi adapter for your computer, so the computer connect via the Wi-Fi of the Nokia to another Wi-Fi access-point? Or
B) Do you want to use your computer as Wi-Fi access-point?
Maybe you are looking for
-
How can I make my application as webservice
Hi All, I'd like to know ,how can I make my application as webservice which has built on strut framework. with regards Babu H
-
7 months experinced questions.
what can be interview quetions for as a junior DBA if I am working in maintenance.? Plz reply soon. thanks in advance.
-
Compiz, XFCE, and gtk-window-decorator
I recently caused my system to stop booting by messing with some stuff (yay for editing files and not reading the entire wiki page first!) and I ended up just deciding to do a clean arch install (when your system partition has 50Gb of programs on it,
-
Hi, I want to take my first exam as 1Z0-047. I have just completed my b-tech and have some basic knowledge about sql. I have "OCA Oracle Database SQL Certified Expert Exam Guide (Exam 1Z0-047)" is this book is sufficent to crack this? if not please s
-
Link JHeadstart copy not working
Hi there, Customer tried to download the JHeadstart evaluation copy from: http://www.oracle.com/technology/software/htdocs/devlic.html?/consulting/9iServices/soft10g.html Did not work, because 404 error. Could you fix that? Thanks! Jan Kettenis JHead