Can i sync mobile me and exchange contacts at same time?

hi, i've a mobileme account, with my contacts synchronized. The question is, if now, i configure on that same iphone, an exchange account (my work email), and i also sync exchange contacts, will my mobileme contacts be erased? or they will coexist both without any problem?
thanks!!!

Yes, you can. Contacts from MobileMe and the Exchange server will be stored in separate groups. In addition, you'll have access to the Global Address List on the Exchange server.

Similar Messages

Can I sync to Mac AND PC at the same time.

This is probably a long shot, but can I synchronise my contacts and calendar my iPhone 3G to BOTH my home Mac (Address Book and iCal) AND my PC at work (Outloook)?
Thanks

Actually, this is not entirely accurate. If your work email is carried on an Exchange server, you can set up the mail account so that it is pushed to the iPhone, and likewise with the Calendar and Contacts. (Not sure yet if you can sync both the Outlook calendar AND iCal, or the Outlook contacts AND Address Book, although I doubt it.) However, even if you choose to sync email, etc. through Exchange, you can sync your music on a Mac through iTunes.

Lines on screen, can't reset w home and sleep button at same time

Lines on screen, can't reset w home and sleep button at same time. Any advise. 4th gen. 32g touch

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Can we use Badi BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time

Hi everyone,
We need you help. We are working in SRM 7 and ECC 6 EhP 4. We have a doubt. Can we use badis BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time in a classic scenario?
We want to create the contract in ECC, and then we want to return the SC in SoCo in order to create the PO with the SC and the contract.
We activate both, but the SC is not returned in SoCo.
Thanks,
Ivá

Hi Ivan
You can use both badi to change srm standard behavior.
but one shopping cart item and it can have only one follow on document either Contract or Purchase order.
i presumed that you want to use same sc for two purposes to create both SC and PO but it is not possible.
for example
shopping cart item has follow on document created as a contract But you need to create a another shopping cart to create a Purchase order w.r.t that contract .
Once follow on documents are created sourcing flag will be removed .- rule
BBP_SOURCING_BADI - you can write your custom logic and make way to cockpit .
BBP_DETERMINE_LOGSYS - Determine your logical system.
Muthuraman

Can I use both cs and cc at the same time?

Can I use both cs and cc at the same time after upgrade to Adobe Creative Cloud?

Yep. I have CC and CS installed and they both work. However, I don't see why I should use cs.
Regards
Kasper

Can we use both INSERT and UPDATE at the same time in JDBC Receiver

Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,

Hi ,
          If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
    Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
    There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam

Why can't I run Safari and Skype at the same time without making my computer freeze up?

I can't believe I can't run Safari and Skype at the same time without my computer freezing up, it's a MacBook Pro with Mac OS 10.6.8 and it has an Intel Core 2 Duo CPU with 2.2 Ghz and 2 Gb of RAM. Is this a hardware problem or a software problem?

I haven't gone to the trouble of actually testing to see which uses more CPU power, but Firefox has been faster than Safari on every Mac I've ever owned.
To see CPU usage by process, open the terminal (in Utilities) and enter 'top' at the command line. You might have to expand the window as processes don't appear in any logical order.
It could also be hardware-related: I have late 2009 mini with similar specs and it pinwheels easily.

Can i use Firewire 800 and 400 at the same time?

I have a HD connected to my 800 port works fine and a GL-2 camera on the 400 and final cut pro won't see the camera. Can I have 2 devices hooked up at the same time?

Yes. But you did not say whether the camera works alone or not at all. In the latter case it could be the camera isn't compatible.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Can the Extreme do N and G at the same time?

i have older computers that have G and two newer ones with N. i need a router and was wondering if this can do N and G at the same time.
13.3" MacBook Mac OS X (10.4.10) White, Superdrive, 1GB RAM, 120GB HD

i have older computers that have G and two newer ones
with N. i need a router and was wondering if this can
do N and G at the same time.
Of course. The AEBSn can support n, g and b devices at the same time.

Can i sync an ipad and iphone on the same computer

I've got an iPhone 3GS and am thinking of getting an iPad 2 as well. How does syncing the 2 devices on the same computer work? Also, can I share Apps that I have purchased across the 2 devices, or do you have to pay for them twice?

I am syncing my iPad and my iPod Touch using iTunes on the same computer.
It's even possible to connect both devices at the same time to iTunes.
Yes, apps are shared between devices, but only if those apps are actually able to run on both devices.
You therefore only need to buy a certain app once and use it on your two devices.
Your devices are in fact administratively attached to your Apple ID.

IPhone - how to sync with iPhoto and Aperture at the same time ???

I'm having a really hard time with syncing my photos - I'm using iPhoto and Aperture on my Mac. When I launch iTunes and start managing my iPhone, it seems like I should be able to sync photos from a variety of sources all at once (iPhoto, Aperture, other folders).
However, whichever option I select in the photos drop-down becomes the only libraries that are available to sync. What I mean is that if I select some of the Albums in my iPhoto list and sync those, when I later drill down to Aperture and select albums from there and perform a sync - then the previously synced/loaded albums and photos from iPhoto are automatically removed from the iPhone.
Why can't I sync between multiple photo albums / sources at the same time? This is incredibly annoying.

Here's how I solved this problem:
In Aperture, select File -> Import -> iPhoto Library
Then under the "Store Files" dropdown, be sure "In their Original Location" is select. This will allow Aperture to see your iPhoto library, but it will be managed by reference rather than phyisically imported.
Now, in iTunes, select Aperture as the application from which you want to synch photos, and select the option to synch specific albums.
You should be able to see the names of albums in iPhoto as well as those created in Aperture.

Can't watch a programme and record at the same time.

I rang Sky who say it's nothing to do with them. Gave me Lovedigital number. Rang them they said contact my landlord. Rang Bristol City Council, they say it's nothing to do with them.

What I meant is the number of cables going into your Sky box. If there is only one cable going to your Sky box, that answers the question of why you can't watch one thing and record another at the same time - your Sky + box would require two inputs to do that. From what you've said it sounds like a communal dish set up. If that is right then whoever looks after that are the people you need to contact to see about the possibility of getting a double feed into your home.

POP3 Accounts and Exchange at the same time ?

Is there a way to have my comcast e-mail (as well as my iMac/personal iCal, and Address books) account and my work (exchange with separate contacts and calendar) account work at the same time on an iPhone ?

If you have a MS Exchange server which is available or accessible via normal internet without going through a firewall then yes you should be have to have both worlds. Sorry, if I confuse you but I am used to my situation. My compnay Exchange firewall is behind corporate firewalls which I have to use VPN(nortel) to access the internal network. Once you get past that firewall. In this case, the corporate VPN server assigns an IP address to your computer or iphone. From that phone on your access to any email servers will go through the corporate firewall. My company does not allow access to outside email so this could be your problem if my example is same as yours. Since you did not indicate VPN connection for Exchange, I made an assumption. Again if you are not going/using VPN then you should be able to access both POP3 and Exchange.

Can my ipad use wifi and bluetooth at the same time?

Hi
I can stream radio via wifi radio apps and play through earphones. I can connect to my bluetooth speaker and play music stored on my ipad ok.
When I connect up to my bluetooth speaker and try to stream the radio app it plays for a couple of seconds then stops for 20 seconds then plays for 2 seconds and carries on start, stop, start (I guess it's buffering or something?).
Is it not possible to listen to a radio app and stream it to a bluetooth speaker at the same time?
Any suggestions welcome

Thanks for confirming it should work man.
A quick check of the talktalk forum and it's my talktalk D-link 2780 router. It's a known problem.
It all works ok on next doors router so Off to PC World for a decent router.
Thanks again.

Can Airport Express do AirPlay and AirPrint at the same time? Mine doesn't

I've just set up my Airport Express to join my existing network in client mode, wanting to use it for Airplay and Airprint. Both seem to work fine, but then they mysteriously stop working. I think it happens when I print something; that seems to mess up the device. Like, the Airport Utility will say the base station is no longer part of the network, but I can still print to it, and Airplay doesn't work. It's very confusing.

Just to clarify, I'm not actually using Airprint. It's a USB printer and I'm just printing to it wirelessly via the Airport Express.

Can i sync mobile me and exchange contacts at same time?

Similar Messages

Maybe you are looking for