Can I synchronize and playback two different quicktime videos?

I have some quicktime video from my iphone that I would like to view side-by-side on my computer using Quicktime. Is there a way to have two separate quicktime movies play back synchronized so that if I stop one video, it stops the other? I also want to be able to go frame-by-frame and have both movies stay in lock step.
Basically I am trying to analyze my golf swing. I have a good swing and a bad swing on video with the same club and I have pretty consistent tempo. I want to be able to play back both swings and see if I can figure out what I am doing in one, but not the other.
I tried to search for this but without success. Thanks for any advice on how to do this. I am using QTPro 7.7.1 on Windows 7 Professional

Well, both frame rates should be the same since the video was taken on my iPhone 4s
"Should be?" I tend to use camcorders rather than mobile phones for video recording. In the past I have found the frame rates less than consistent. However, I do not have an iPhone 4S and so I have no personal experience in this area. In the past the iPhone usually described the recording frame rate as "up to 30 fps." The iPhone 4S says "at 30 fps" so maybe they have improved frame rate consistency—but I'll still stick to a camcorder.
When I trimmed the files I also did a "save as" and not just a save so I don't know what else I should have done prior to merging the files.
Basically, I have found that a frame rate of 29.97 (NTSC) trimmed randomly from two separate files can vary in frame alignment due to the variations in the location of the dropped frame used to average the frame rate to a non-integer value. In addition, the presence of a timecode track in one of the files to be merged can also create synchronization problems depending on your specific work flow. (I.e., in such cases I normally create an new player, copy the file without a timecode track, and then extract the secondary video track for merging to the "new" player or re-compress trimmed files so they have common start start frame and drop frame points.) There may may be other potential problems but these are the most common ones for me.
Here is an example of one of my "comparison" files. In this case, I am comparing an H.264 track video track against a ProRes 4-2-2 video track containing the same material.

Similar Messages

Hello, I try to sync ICloud with Outlook 2010 on a PC and it work well. When I tried to sync iCloud on a second computer (PC) with Outlook 2010 it didn't work. My question is, can I sync ICloud on two different Outlook account? Thank you.

Hello, I try to sync ICloud with Outlook 2010 on a PC and it work well. When I tried to sync iCloud on a second computer (PC) with Outlook 2010 it didn't work. My question is, can I sync ICloud on two different Outlook account? Thank you.

Hi nprguy,
It sounds like an earlier version of the BlackBerry® Desktop Software installed on your PC may be conflicting with this installation.
I would advise uninstalling both versions of the BlackBerry Desktop Software then reinstalling the latest version.
The following KB articles should provide more information on the issue.
"The feature you are trying to use is on a network resource that is unavailable" when uninstalling BlackBerry Desktop Manager www.blackberry.com/btsc/KB10220
"Error 1316" InstallShield error is encountered when uninstalling or upgrading the BlackBerry Desktop Software
www.blackberry.com/btsc/KB04272
Thanks.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini?
On my PC I simply have a master return email address and use a POP for the secondary address. Both are through the one exchange account without a problem. I need to be able to do the same on my Ipad.

Ah, I should have made that clear. My domain didn't come from google. It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail. I actually have a bunch of domains (with websites).
Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such). Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender. I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it.

How can I transfer songs from two different itunes?

I want to transfer songs from my brother's itunes library to my shuffle, but when I plug it in his computer, a message saying that his library is not linked to my library (or something to that extent) and whether I would like to replace the songs. If I click yes, all my existing songs are replaced with HIS songs. If I click on NO, the Shuffle icon does not appear at all and I cannot transfer any of his songs to my shuffle. How can I transfer songs from two different computers into my shuffle without replacing any of my existing music?
Shuffle Windows XP
Windows XP

You'll have to setup your iPod to manual instead of automatic update (I'm not sure, though, if it works with the Shuffle as well).
Alexander.

Can a Panel title have two different fonts in flex 3?

hi Frenz,
I am using flex 3. I have a question related to the Panel title. Is it possible that a Panel can have a title with two different fonts? For example I want the panel title to be like this "HELLO - How are you?".
Please help me out with this....

Hey So I modified this can you tell me if its correct. My company name is FAMSCO CONSTRUCTION. I wanted the F in Vivaldi size 72 and the rest in Book antique....Can you help me out?
FAMSCO CONSTRUCTION INC

How can I use music from two different iTunes accounts?

how can I use music from two different iTunes accounts?

If you mean iTunes Store accounts, there's really nothing for you to do. Just add the tracks to the iTunes library and play them. Music purchased prior to late-2009 will been to be authorized, though. Pull down Store > Authorize... and type the credentials of the Apple ID used to buy the tracks.
If you mean something else, please describe in more detail.

Can you access and store two itunes libraries on one computer?

can you access and store two itunes libraries on one computer?

Welcome to the Apple Community.
Yes but you may run into issues if you want them both to run iTunes Match or automatic downloads.

What can I do to improve a blurry quicktime video that was SMS'd to me it is a 1.24MB .mov file and I have QuicktimePro. It was taken on an Iphone but I am not sure with what software.

What can I do to improve a blurry Quicktime video that was SMS' texted to me? I think it was taken on an Iphone and it was sent to me as a 1.24MB .mov file and I have Quicktime Pro if that helps. I REALLY need to make this as clear as possible, the audio is good, video is blurry. Here is some additional data:

anything I can even try? Sender is off the grid? I don't need a production ready copy just viewable?
You can rescale (stretch) the size of the display but this will only make it blurier and/or introduce pixellation. When the file was encoded at a lower resolution much of the original data was thrown away to make the file smaller. This data is gone/missing and cannot be recreated from what is left. What you've got is all you have to work with. Any filters you can apply will require re-compressing the file again which will likely introduce more artifacts and increase the size of the file without really improving its overasll quality.

Can seeded Elements and Balance have different Date Track

hi,
The Elements created in our instance is date tracked to 01-JAN-1900 and the seeded balance date tracked to 01-APR-2005. Can seeded Elements and Balances have different date track both being seeded. Example Element is "PF INFORMATION" and Balance Named by "Leave Encashment"
How to resolve this problem when I am trying to add seeded Balance which is date tracked to 01-APR-2005 to Element date Tracked to "01-JAN-1900". I am not able to find the Balance in that Element as balance is date tracked later than Element.
If I want to add custom Element which is date tracked to 01-JUN-2002 and Seeded Balance which is date tracked to 01-JUN-1950. Since in this case i am not able to see the Custom Element in the Balance screen.
Thanks
Ram

you are not allowed to add feeds to a seeded balance type.
Can the dates be different? Sure. Look to your own dates.
By the way, why bothering about dates in 2005 and 1900, if you want to run a payroll now?

Can I buy and use two upgrades?

Hello,
have Creative Suite 5.5 Production Premium. I want to upgrade the product.
Can I buy and use two upgrades: Creative Suite 6 Design Standard
and Creative Suite 6 Production Premium?
Second question: if I make my upgrade Creative Suite 5.5 Production Premium (which has included, among othersAdobe Premiere Pro) to Creative Suite 6 Design Standard (which does not have Adobe Premiere Pro), will I still be able to use the applications contained in the Creative Suite 5.5 Production Premium (Adobe Premiere Pro), or it will be deactivated?
Thank you

What would you want with 2 upgrades if you have only 1 qualifying product? That's simply not possible since the upgrade serial is tied to the serial number of the previous product. Otherwise your CS5.5 will remain fully functional when you install CS6.
Mylenium

How can i use eyedropper between two different art board.

Hi
How can i apply the same color for the images in two different art boards with eyedropper.
I am trying to apply the same color from the image in one art board to another image in another art board.
Can any one help me please. Thanks
Steve
I am using Mac

apresslink,
Presuming you are unable to use the Eyedropper Tool normally, in other words keep the target object selected while you pick up the colour, by having the Artboards open in adjacent windows to ClickDrag between (I am still with 10 which may explain at least part of my ignorance for which I apologize):
Until someone presents a smarter solution, you may cheat and create a carrier object beside the source object, drop the colour in that, cut and paste it to be beside the target object, and drop the colour there. With multiple colours to drop multiple times, you may create a palette to hold them, to use just like a painter working on several canvases at the same time. Or you could paste diminshed copies of the source objects.

Can I download itunes on two different computers using the same apple id?

Can I download itunes on two totally different computers using the same apple id and go back and forth between them (ie home computer and work computer)?

You can use a laptop to set up multiple devices with the same apple ID and you can maintiain different content on each device.

How can I select events from two different channels?

Hi everybody, I have another question! :)
When processing events in config.xml, using a CQL sentence, Eclipse compiler doesn't allow me to select more than one event.
I paste here my app.context.xml and my config.xml:
app.context.xml:
<wlevs:event-type-repository>
<wlevs:event-type type-name="HorseEvent">
<wlevs:class>com.bea.wlevs.event.example.sevenhorses.HorseEvent</wlevs:class>
</wlevs:event-type>
<wlevs:event-type type-name="GunmanEvent">
<wlevs:class>com.bea.wlevs.event.example.sevenhorses.GunmanEvent</wlevs:class>
</wlevs:event-type>
</wlevs:event-type-repository>

<wlevs:adapter id="sevenhorsesAdapter" class="com.bea.wlevs.adapter.example.sevenhorses.SevenHorsesAdapter" >
<wlevs:instance-property name="messageHorse" value="I am the horse number: "/>
<wlevs:instance-property name="messageGunman" value="I am the gunman number: "/>
</wlevs:adapter>
<wlevs:channel id="horseInputChannel" event-type="HorseEvent" >
<wlevs:listener ref="sevenhorsesProcessor"/>
<wlevs:source ref="sevenhorsesAdapter"/>
</wlevs:channel>
<wlevs:channel id="gunmanInputChannel" event-type="GunmanEvent" >
<wlevs:listener ref="sevenhorsesProcessor"/>
<wlevs:source ref="sevenhorsesAdapter"/>
</wlevs:channel>

<wlevs:processor id="sevenhorsesProcessor" />
<wlevs:channel id="horseOutputChannel" event-type="HorseEvent" advertise="true">
<wlevs:listener>
<bean class="com.bea.wlevs.example.sevenhorses.SevenHorsesBean"/>
</wlevs:listener>
<wlevs:source ref="sevenhorsesProcessor"/>
</wlevs:channel>
<wlevs:channel id="gunmanOutputChannel" event-type="GunmanEvent" advertise="true">
<wlevs:listener>
<bean class="com.bea.wlevs.example.sevenhorses.SevenHorsesBean"/>
</wlevs:listener>
<wlevs:source ref="sevenhorsesProcessor"/>
</wlevs:channel>
And here you are the two config.xml, I have tried two different ones and none of them runs.
The first one is:
<?xml version="1.0" encoding="UTF-8"?>
<n1:config xmlns:n1="http://www.bea.com/ns/wlevs/config/application">
<processor>
<name>sevenhorsesProcessor</name>
<rules>
<query id="horsesRule">
<![CDATA[ select * from horseInputChannel
        ]]>
</query>
<query id="gunmansRule">
<![CDATA[ select * from gunmanInputChannel
        ]]>
</query>
</rules>
</processor>
</n1:config>
As you can see, I use here TWO CQL sentences from the two channels that are defined in app.context.xml.
The other one is:
<?xml version="1.0" encoding="UTF-8"?>
<n1:config xmlns:n1="http://www.bea.com/ns/wlevs/config/application">
<processor>
<name>sevenhorsesProcessor</name>
<rules>
<query id="horsesRule">
<![CDATA[ select * from horseInputChannel, gunmanInputChannel
        ]]>
</query>
</rules>
</processor>
</n1:config>
I use here only ONE CQL sentence in which I try to get events from the two channels that are defined.
None of them works.
Can anybody help me?
Thank you!

Hi! Here you are the files you required:
SevenHorses.context.xml
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:osgi="http://www.springframework.org/schema/osgi"
xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/osgi
http://www.springframework.org/schema/osgi/spring-osgi.xsd
http://www.bea.com/ns/wlevs/spring
http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd">
<wlevs:event-type-repository>
<wlevs:event-type type-name="HorseEvent">
<wlevs:class>com.bea.wlevs.event.example.sevenhorses.HorseEvent</wlevs:class>
<wlevs:properties>
<wlevs:property name="messageHorse" type="java.lang.String"></wlevs:property>
</wlevs:properties>
</wlevs:event-type>
<wlevs:event-type type-name="GunmanEvent">
<wlevs:class>com.bea.wlevs.event.example.sevenhorses.GunmanEvent</wlevs:class>
<wlevs:properties>
<wlevs:property name="messageGunman" type="java.lang.String"></wlevs:property>
</wlevs:properties>
</wlevs:event-type>
</wlevs:event-type-repository>

<wlevs:adapter id="sevenhorsesAdapter" class="com.bea.wlevs.adapter.example.sevenhorses.SevenHorsesAdapter" >
<wlevs:instance-property name="messageHorse" value="I am the horse number: "/>
<wlevs:instance-property name="messageGunman" value="I am the gunman number: "/>
</wlevs:adapter>
<wlevs:channel id="horsesInputChannel" event-type="HorseEvent">
<wlevs:listener ref="sevenhorsesProcessor"/>
<wlevs:source ref="sevenhorsesAdapter"/>
</wlevs:channel>
<wlevs:channel id="horsesInputChannel2" event-type="HorseEvent">
<wlevs:listener ref="sevenhorsesProcessor"/>
<wlevs:source ref="sevenhorsesAdapter"/>
</wlevs:channel>

<wlevs:processor id="sevenhorsesProcessor" />
<wlevs:channel id="horseOutputChannel" event-type="HorseEvent" advertise="true">
<wlevs:listener>
<bean class="com.bea.wlevs.example.sevenhorses.SevenHorsesBean"/>
</wlevs:listener>
<wlevs:source ref="sevenhorsesProcessor"/>
</wlevs:channel>
</beans>
config.xml
<?xml version="1.0" encoding="UTF-8"?>
<n1:config xmlns:n1="http://www.bea.com/ns/wlevs/config/application">
<processor>
<name>sevenhorsesProcessor</name>
<rules>
<query id="horsesRule">
<![CDATA[ select message from horsesInputChannel2 where message like "(gunman)"
        ]]>
</query>
</rules>
</processor>
</n1:config>
Thanks!

HT2240 CAN I EDIT AND TAKE PIECES OF THE VIDEO OUT OF THE VIDEO WITH QUICKTIME?

I want to edit a video and take out portions I do not want there for a video post. How do I edit out (trim) out bits I do not want and then save the new video?

These steps assume you've got the Pro version of QuickTime Player 7 for Windows:
Open the file you wish to edit and move the playhead (you can slide it and use the right/left arrow keys to adjust) to the first frame of the video you want to remove.
Use the letter i key to create an "in point". You'll see a small marker at the bottom of the timeline noting your place in the file.
Adjust the playhead to the last frame you wish to edit and use the letter o key to set an "out point". You'll see another marker and the edit area is highlighted in the timeline. This is known as a "Selection".
From the Edit menu you can "Cut" or "Delete" this selection.
Repeat those steps until you've removed what you want from the original file.
File menu and choose "Save As". Pick a save location and give the file a new (different) name.
Done. Your original file is left untouched by those edits.

How can I combine post to two different tables with one form?

I am trying to create a "phantom" record in a table to be used later in a report. How can I create a form and properly $_POST to two different tables? Thanks for any suggestions!

In POST processing, just do the insert to one table, followed by the insert to the second table. I don't understand where you are getting stuck.
Sometimes when we do an insert, we need the auto-generated ID from the newly created record as a "foreign key" for the record created in the second insert. MySQL has a nifty solution for that. The specific code depends on whether you are using the mysql, mysqli or PDO database connection.

Can I synchronize and playback two different quicktime videos?

Similar Messages

Maybe you are looking for