Can I system restore a purchased mbp mid 2010 but keep the upgraded OS?

I purchased a used MBP mid 2010 and had the seller meet me at the apple store. After I verified the computer was not stolen I asked to have it factory wiped, but they said I needed an appointment. Now I've read directions on this forum on how to restore it myself, is it the same technique they use in the store? Can I restore this machine and keep mavericks or must it be restored to the original OS?

fastcash124,
when Mavericks is downloaded from the Mac App Store, it is non-transferable; the seller should have wiped it from the internal drive before selling it to you. Once you’ve done a clean reïnstallation of Snow Leopard and run Software Update to get it to Mac OS X 10.6.8, you can then download and install your own (non-transferable) copy of Mavericks from the Mac App Store.

Similar Messages

  • Trying to Install Windows 7 onto MBP Mid-2010 but I get this "No bootable device -- Insert boot disk and press any key". What do I do?

    I'm trying to install Windows 7 onto my MacBook Pro Mid-2010 (MacBookPro6,2) from a USB drive, since my Super Drive no longer will burn DVDs or CDs. I did the XCODE trick to allow me to make the bootable USB. But when it reboots after partitioning I get this, "No bootable device -- Insert boot disk and press any key" message. When I press a key after reinserting the USB it still won't boot after pressing a key. I unplugged anything connected to it and it still doesn't work. Is there any way I can get it to be recongized or do I just need to get an external disc drive and burn a disc that way? 

    If your computer came with an inetrnal optical drive, you must use that to install Windows.

  • What happens if I restore my new iPhone from backup but keep the old phone on?

    I currently have an iPhone 5 and have the 6+ on the way. I'm worried about the size of the 6+ so I'd like to test it out for the 14 day period. If I set up the 6 by restoring from iCloud backup can I still keep my 5 up and running. I wasn't planning on transferring my cell service over to the 6 yet and just running off wifi. Obviously iTunes is going to see both phones as being the same device so that would cause a problem but what if I left wifi sync and iCloud backup on the 6 off. Would this setup work? Thanks in advance.

    What I mean is still track my stolen one. I don't know if this will make sense to you but I'm thinking that if I restore the back up data on this phone..on my stolen phone it will like forget the icloud account or something and think this phone is the stolen one so when I go to track the stolen one, it will show that phone as the one I have now because I restored the back up from that phone.

  • If I do a full system restore on my MBP  will i get ilife off of the boot disks that came with the computer?

    If I do a full system restore on my MBP  will i get ilife off of the boot disks that came with the computer.
    Hi on my MBP i am going to restore it.
    It came with iLife will this be on the boot disks?
    Thanks

    If your computer shipped with Snow Leopard, that means it shipped with two disks: an Install disk that contains the OS, and an applications disk that contains the iLife suite. You would use the applications disk to reinstall iLife.

  • My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd.

    My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd. Earlier I thought this behavior is due to spotlight indexing but it finished after 3 days. I deleted all caches from library. But no luck, still running extremely slow. I checked activity monitor for cpu usage, it shows above 90% is idle. The memory usage always shows PM - 4 GB, Memory Used 3.96 GB, VM - 4 GB, Swaped used 0 bytes, App Memory 1.82 GB, File Cache 1.44 GB, Wired Memory 480 MB.
    Thanks in adavnce for help.

    Was it the combo updater that was installed or the OS X 10.9.3 update. There is a difference.
    MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
    Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
    Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.8.4 install from a regular update, just run the 10.8.4 Combo Updater on that system.
    "Delta" updaters can only take you from one version to the next. For example: 10.9.1 to 10.9.2. If somehow the 10.9.2 is missing something it should have, and that something isn't changed between 10.9.1 and 10.9.2 it will still be stale after the delta update.

  • After ML upgrade, MBP mid 2010 crashes or freezes when connecting/disconnecting apple cinema display, specially when is put to sleep.

    After upgrading to ML, when I connect my MBP mid 2010 to my Cinema Display system crashes, if I close the mac to put it to sleep, it freezes, if I pull the power cord and then disconnect the cinema display,  it freezes to black. 
    Bottom line... MBP + ML + Cinema Display = Useless aluminum can.
    Any Help??? .... Please????

    I have exactly the same problem.  I found that unplugging the Cinema display (both from the MB and power) and re-connecting did exactly nothing, but that the MS Windows solution works:  Reboot your machine.
    Note:  the problem comes up when the display sleeps, not the computer.
    We are really making progress here with the evolution of OSX!  NOT!

  • My MBP mid 2010 display blackout and froze while working but my keyboard light will still light up. Won't be able to retrieve it and have to hard shutdown. Sometimes it happens a lot. Wether it connected to power or not, it will blackout on and off. Pleas

    My MBP mid 2010 display blackout and froze while working but my keyboard light will still light up. Won't be able to retrieve it and have to hard shutdown. Sometimes it happens a lot. Wether it connected to power or not, it will blackout on and off. Please advice what shall I do.

    Do you have a 15" mid-2010? If so then your problem is surely...
    Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
    If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
    Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
    Kernel Extensions in backtrace (with dependencies):
             com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff
                dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
                dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
                dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
             com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff
                dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
             com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
                dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
                dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
    Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all. Although video problems can certainly be a portent of things to come…
    So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. The unfortunate thing is that many people have passed the “three years from date of purchase” now and Apple is not honoring the free logic board replacement for many users. Some dealers seem to be making some exceptions for those past the three year mark, but don’t count on it…
    Good luck,
    Clinton

  • Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
    In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
    After that is done reboot the machine and see if you can log in.
    If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
    Reboot and try again.
    If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
    Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
    Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
    Lots of work, but there is no Lion disks.
    https://discussions.apple.com/message/16276201#16276201

  • MBP mid 2010 - 15" 2,4Ghz (Battery Problem)

    Hi guys.
    I have a MBP mid 2010. My battery wont last more that 4.30 hours.
    I have tried more than enough times to test' it.
    Last Night with fully charged battery I was able to get 4.40 Hours.
    Bluetooth OFF
    Low monitor brightness
    Low keyboard illumination
    Air Port was on.
    Basically web browsing and 4 or 5 youtube videos.
    Did not make any software instalation or updates.
    4.30 hours its just to low.
    BTW it as 37 full charges
    My work laptop wich is a Dell Latitude E6400 with a 9cell battery I get more than 5 hours. And it as way more full charge cycles.

    Certainly not... but I'd rather source a complete antiglare clamshell lid and slap it on myself thus upgrading the machine, as long as I know I wouldn't have to replace the logic board as well... I've done plenty of surgery on notebooks, from removing a stuck business-card shaped CD from a 12" PowerBook G4 (requiring *complete* disassembly of the machine) to swapping ThinkPad T61 motherboards into T60 chassis creating a 15" 4:3 IPS FrankenPad which can take 8GB of ram... so I can handle swapping a display.
    Local apple store hasn't told me clearly whether or not it's possible, just that they will only replace it with the original screen...
    I can only find one logic board part # for a 2.4GHz mid-2010 15" MBP, which suggests to me that upgrading the screen should be no problem, but I'd love to hear from someone who's done it or can give a definitive answer as to whether or not it's possible...

  • I I can no longer access my purchased TV shows that are in the Cloud

    After installing ITunes 11.1, I can no longer access my purchased TV shows that are in the Cloud. I have opened Preferences, went to store to see if the box is checked for displaying items that are in the cloud and this is in order. Still can't access these shows.
    <Re-Titled By Host>

    I experienced the same issue. I am familiar with it from previous versions of iTunes and located the correct "Show iTunes Purchases in the Cloud" checkbox on your screen capture. Wasn't on mine. I decided to reinstall iTunes 11.0.1 and, as you can see from my screen grab, it is there now.  Problem solved.

  • I had to re-install XP on my laptop. I installed itunes. Now I want to restore my music from backup CD's. But the option device under file is greyed out. I can't select restore from backup. How do I make the restore option active. I have an ipod nano

    I had to re-install XP on my laptop. I then installed itunes again. Now I want to restore my music from backup CD's. But the option device under file is greyed out. I can't select restore from backup. How do I make the restore option active? i have an IPOD nano.

    I think it's QuickTime player causing the problem, when I try to open it I get the windows error that an error has occured
    Let's try swapping out your QuickTime again, taking a few extra explicit precautions this time.
    Head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx. (If “Hide filename extensions for known file types” is enabled on the PC, then those two files will appear as “QuickTime” and QuickTimeVR”.)
    7. Restart your computer.
    Now download and save a copy of the latest standalone QuickTime installer to your hard drive. (We'll run the install from there rather than online.)
    Latest Quicktime Installers … get the one that doesn’t mention iTunes
    Switch off antivirus and antispyware applications prior to the install. Start the install by doubleclicking the QuickTimeInstaller.exe.
    If that install goes through okay, restart the PC and try launching iTunes again. Does your iTunes launch properly now?
    (If you get an error message on the QuickTime uninstall or standalone reinstall, let us know what it says. Include error message numbers if you're getting any.)

  • I can't go beyond release 3.6 because it slows my system down to a crawl. When I back the upgrade out and go back to 3.6 my system is fine. Any suggestions?

    I can't go beyond release 3.6 because it slows my system down to a crawl. When I back the upgrade out and go back to 3.6 my system is fine. Any suggestions?

    Does that PC meet Firefox 4.0+ system requirements for hardware? <br />
    Firefox 4.0+ versions are considerably different from earlier versions. <br />
    http://www.mozilla.com/en-US/firefox/6.0/system-requirements/
    * Pentium 4 or newer processor that supports SSE2
    * 512MB of RAM
    * 200MB of hard drive space

  • HT204291 I have a MBP 13-inch, Mid 2010 and have just upgraded to mountain lion and am trying to connect it to my apple tv however i dont get the air play icon on my mac i have followed all the advise on support anyone able to help??

    I have a MBP 13-inch, Mid 2010 and have just upgraded to mountain lion and am trying to connect it to my apple tv however i dont get the air play icon on my mac i have followed all the advise on support anyone able to help??

    stevie, a third party app called airparrot will give you the pretty much the same as mirroring and forks on Macs too old to mirror.

  • TS1574 The video and sound was working on my computer two days ago (and has ALWAYS worked on my computer since purchasing it in 2010) but now for some reason I can't play video and there is no sound.  I updated software today.  Still sound & video not wor

    The video and sound was working on my computer two days ago (and has ALWAYS worked on my computer since purchasing it in 2010) but now for some reason I can't play video and there is no sound.  I updated software today.  Still sound & video not working.
    Please help.

    One of the following steps should help.
    1. Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Restart computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Web Content:
        Click in the box for "Enable Plug-ins".
    3. Check  whether you are currently  in  YouTube HTML 5 trial.
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box for
       "You are currently in the HTML5 trial".
    4. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
        Uncheck the boxes next to all items.
        Check the box next to "Remove all website data".
        Click "Reset".
    5. Turn off Extensions/Plug-ins if any that may interfere with Flash working properly.
        Safari > Preferences > Extensions
    Best.

  • HT204032 Why is Powernap not available for other MB's such as the MBP mid 2010 model for example?

    Why is Powernap not available for other MB's such as the MBP mid 2010 model for example?

    I have a 2010 MBP 6,2 with an aftermarket SSD. My machine gets mail and notifications while asleep, but I do not have any powernap pref box in energy savings under 10.9.1
    I do not have an Apple SSD. I have a Crucial M4-CT512M4SSD2
    Apple did replace my MB last Fall under the video fault problem (for free after 3 years.....thanks Apple), but it stills identifies as a 6,2  Boot ROM  MBP61.0057.B0F
    I wish I could shut off this powernap feature, but have no access to it.

Maybe you are looking for

  • 12c Cloud Control installtion issue (on Windows 7-64 bit)

    Hello, I am trying to install 12c Cloud Control on my personal computer Windows 7 (64-bit) OS for practice purpose. The database setup has been fine and the creation of pluggable database has been successful post which we need to install the cloud co

  • Abt ODS

    Hi, I have a doubt in ODS, I know that there r 5 images in changelog table, but whenever I open, I am able to see only before image with symbol 'N'and After image with symbol 'X'. What abt the other 3 images, how we can view them. pls clarify my doub

  • Can't Find Pattern Swatches - Help Please

    Very new to Illustrator, ( CC ) sorry. I'm trying to make a repeating pattern, but any way I access it, there are no patterns in the pattern libraries, only color schemes for those patterns. Where did the patterns go? How do I get them back?  The cat

  • Sitemap.xml

    I have used an excellent free sitemap generator at http://www.xml-sitemaps.com/ but I get a strange render in a browser. What the hell is wrong with the top level????? I've checked the script and everything seems to be OK. When I view other sitemap.x

  • CVERSEXPORT.OUT not found during upgrade

    Hi, In the extraction Phase of the upgrade (upgrade to NW7.01) we are getting the below error "SEVERE ERROR: File CVERSEXPORT.OUT not found or empty." Please advice. Regards, Cs