Can I take synchronous data from 2 NI9215/USB-9162's using VI-Logger Lite

I am a total noob, so this may be posted (although I have done a search and can not find the direct answer)
We have 2 NI-9215 / USB-9162 devices that we want to take synchronous
data from using VI Logger.  When these devices were sold to us, we
were told that this was possible, but it appears as if it is not. 
Both devices appear in the Devices and interfaces pull down, and I can
operate either one of them separately, but not together.
Thanks

Hi Ted,
Since you have to run the two acquisitions in different tasks, they are run independently and cannot be synchronized.  Is there a way for you to specify a start trigger for the task?  Also, what do you mean that "it doesn't like running two tasks at once"?  Does it slow down your computer performance?  What are the specs of your computer?
Regards,
Nicholas B, National Instruments

Similar Messages

  • Can I delete backup data from my old iPhone which I used to restore my new iphone 5?

    My iphone 4S was stolen, and I had to get a new phone. I had all my data backed up on icloud and it was easy to set up my new iphone 5 and getting all my data back, however, I still have my old'd phone backup data on my icloud and it's been taking up space (about 4gb) of data. Can I delete this data? Will it delete my iphone5's data as well, as I used it to restore all settings?
    Thanks

    Welcome to the Apple Community.
    You can safely delete the old back up now.

  • How can i Delete the data from three tables at a time  using same key.

    I am New to Oracle ADF, I have a Requirement Like these, I have three tables like Employee,Salaries,Teams all of these are having one common EmpNo as common attribute, I have Search form these will return the all the employees related to that search query, when i click on Delete button the particular employe Data should delete from all the three tables based on the EmpNo.
    Any Help is appreciable..

    1) The easiest way is to mark the foreign key constraints from SALARIES to EMPLOYEES and from TEAMS to EMPLOYEES as ON DELETE CASCADE. The DB server will then delete the necessary rows whenever you delete an employee row.
    2) Another way is to implement a Before-Delete-Row DB trigger on the EMPLOYEES table where you can delete the related rows in the other tables (have in mind, that if you have foreign keys you may get a Mutating Table Exception, so this approach might be not very good).
    3) An ADF way is to implement a custom EntityImpl class for the Employee entity and to override the remove() method where you can lookup the related TeamMember and Salary entities (through EntityAssoc accessors) and invoke their remove() methods too.
    4) Another ADF way is to implement a custom EntityImpl class for the Employee entity and to override the doDML() method where you can delete the necessary rows in SALARIES and TEAMS tables through JDBC calls whenever a DELETE operation is being performed on the underlying Employee entity.
    Dimitar

  • How to take the data from sage system to sap r/3

    hi expects,
              how to take the data from sage system to sap r/3? which adapter is to be used?what is the format of data in sage system?how the scenarios will work ? please help me in solving this problem?

    hi rohit,
    the data transfer can be done by using SOAP adapter
    do chk this link
    http://www.sage.org/lists/sage-members-archive/2001/msg01718.html
    http://www.sage.org/lists/sage-members-archive/2001/msg01739.html
    thanx
    Sampath

  • Concerning midi data in GarageBand for iOS: can we copy midi data from one virtual instrument to another?

    Concerning midi data in GarageBand for iOS: can we copy midi data from one virtual instrument to another?
    For instance: I play my "lucky take" on the virtual piano, and now I am curious how it would sound on let's say a organ. Normally I would select the midi content out of the piano track and copy it into the organ track. I cannot figure out how to do this in GarageBand for iOS. Is there anyone out there with a solution?
    Thanks!

    It is limited, how you can move regions between tracks. Basically, you can move between tracks with the same touch instrument.  See the help: http://help.apple.com/garageband/ipad/2.0/index.html#chsec12c15d
    Move a region
    Drag the region left or right to move it forward or back in time. Align the left edge of the region with the bar or beat on the ruler where you want it to start playing.
    Drag the region up or down to move it to another track with the same Touch Instrument. You can also drag regions between Keyboard and Sampler tracks, and between Audio Recorder and Guitar Amp tracks. Smart Drums regions cannot be dragged to another Smart Drums track.
    If you move a region so that it overlaps another region, the overlapped part of the “covered” region is deleted.
    Paste a region
    You can paste a region you have copied, or paste an audio file from an app that supports copying audio to the clipboard. GarageBand supports 44.1 kHz sample rate, 16-bit depth uncompressed audio files.
    You can paste copied regions to another track with the same Touch Instrument. You can also paste regions between Keyboard and Sampler tracks, and between Audio Recorder and Guitar Amp tracks. Smart Drums regions cannot be pasted to another Smart Drums track. Audio files copied from another app can be pasted to Audio Recorder or Guitar Amp tracks.
    Move the playhead to the point where you want the region to start.
    Tap the header of the track where you want to paste the region to select the track.
    Tap the track where you want to paste the region, then tap Paste.You can also tap an empty area of Tracks view, then tap Paste. In this case the region is pasted into the currently selected track.

  • Can I download my data from an iphone to another device, edit it and then upload it back to the iphone?

    Can I download my data from an iphone to another device, edit it and then upload it back to the iPhone?
    I want to free up memory?

    IT depends on what "data" you are asking about.
    if you are having storage issues on your phone, I would be happy to make suggestions.
    You can store pictures and documents in Dropbox or Google drive.  These are cloud storage apps that keep your information stored off the phone, but available any time.  You can send pages documents to either app in a different format for editing.
    make sure you delete old messages, phone logs, email, as they take up space also.

  • Can I retrieve my data from my mac book pro?

    I did an update on my Mac Book Pro and it crashed. Can I retrieve the data from it? And if so how do I do it? I've taken it to a shop and they weren't sure how to do it.

    Connect the MBP to another Mac and see if you can implement Target Disk Mode:
    http://support.apple.com/kb/ht1661
    If that fails, take out the HDD and place it in an enclosure and connect it to another Mac and see if the data can be accessed.
    Last gasp it to take it to a professional recovery service, but that will cost hundreds of dollars or more with no guarantees.
    If your MBP is still functional, your data may be lost.
    Ciao.

  • Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    Hello. Most of the engineers in developer exchange are more familiar
    with NI products. Contacting ICS for technical support is a better
    course of action.

  • Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

    Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

    If you just installed iCloud does that mean you updated the iOS that's running on your iPad?  If so, you'll want to restore all the programs you have from the backup you hopefully made.
    Refer to these articles for help.
    iTunes: Backing up, updating, and restoring iOS software.
    If you don't want to use iCloud, simply don't activate it.
    You can also download the programs again.
    If you live in a country that supports re-downloading apps then you can re-download them.  You can refer to this article for more help.
    Downloading past purchases from the App Store and iTunes Store
    What to know if your country supports downloading past purchases?
    iTunes in the Cloud Availability

  • How can I restore my data from iCal? I didn't make any backup, but I use  time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

    How can I restore my data from iCal? I didn't make any backup, but I use  time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

    So what is your question?
    If you forgot your encryption password:
    Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
    If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
    The above comes from here:
    http://support.apple.com/kb/HT4946

  • How can i take the pictures from my old ipod and transfer them onto my computer without deleting anything

    How can I take the pics from my old ipod and transfer them onto my computer without deleting anything?

    Pictures on an iPod are stored in a special format, optimized for the iPod's small lower resolution screen, to save storage space.  iTunes puts them into that format when syncing.  There is setting in iTunes, on the iPod's Photos screen (where you set up syncing of photos) for Include full resolution photos.  If that checkbox was checked when you synced the photos to the iPod, THEN you can Enable disk use and find those photo files on the iPod in the Photos folder. 
    Otherwise, you cannot get your photos back, using iTunes.  There may be third-party utilities that can extract individual photos from the iPod, but they will still be lower-resolution versions of the original photo.

  • How Can we get the data from Non-SAP to SAP in WebDynpro

    Hi,
    I hope u understand my query, How can we get the data from Non-SAP to SAP thru WebDynpro Programming.
    Help out with the steps for getting the data or procedure.
    Regards,
    Mutyapu

    You can expose the APIs in the Non-SAP backend as Web Services, and consume them in SAP by creating an Enterprise Proxy. Then these can be called just like normal class methods from Web Dynpro.
    Regards,
    Nithya

  • How can i get the data from database & add them as a link

    Hi,
    how can i get a data from a database(DB2) and that data will be having a file so i should make them as a link.i tried it in jsp .
    <%
    Class.forName("COM.ibm.db2.jdbc.app.DB2Driver");
    Class.forName("COM.ibm.db2.jdbc.net.DB2Driver");     
    response.setContentType("text/html");
    Connection conn = null;
    conn = DriverManager.getConnection("jdbc:db2:spintran");
    Statement stmt = conn.createStatement();
    stmt.executeQuery("set current schema tut");
    ResultSet rs = stmt.executeQuery("select * from tutorial");     
    %>
    Type Of the Category : &nbsp&nbsp&nbsp
    <%
         while (rs.next())
         String desc = rs.getString(1);     
         out.println(desc);
    %>
         <A HREF = "<%=desc%>"><%=desc%> </A>
         <%
         %>
    but it is not working.how can i link.
    thank you.

    what is desc? is it the file name ? whats the data type of desc in db? INFILE?
    if desc is just the name of the file, then make sure that such a file exists in the proper folder.only then the link works..
    that is, if desc is 'a.jpg' then a.jpg should be existing in the same folder as your html is.

  • How can I acquire the data from 3 separate Channels of SCXI1300 simultaneously?

    I am trying to build a DAQ system, which can collect the data coming from 3 different channels. I am using the SCXI 1300 board, Labview 8.0. I used 3 separate DAQ Assistant module to build the system, but it can not collect the data from the 3 channels simultaneously, it can only collect the data from one channel by another channel. So I am wondering how could I fix this problem or rebuild my system.  Thanks

    Hi, Dennis
    I tried to use the NI-DAQmx to replace the DAQ Assistant to do the 3-channel data acquisition simultaneously, and I did the signal splition as you told me. The program works fine for 1-channel data collection, but if I chose 3 channels to do the data acquisition simultaneously, the program could not wokr, and  a warning window  kept poping up, and the window tells me the maximum sampling frequency is 0.952. So I am wondering what is going wrong and how to fix it.
    The attached files are the code and the screen shot of the warning window, please check them.
    Thanks
    Jingrui
    Attachments:
    NI-DAQmx program.vi ‏165 KB
    Warning Window.jpg ‏2305 KB

  • How can we export the data from OAF Page to Excel instead of .csv or .txt

    Hello,
    How can we export the data from OAF Page to Excel instead of .csv or .txt
    When i click on the export button it is exporting to txt file, But i need to export the data into Excel by default
    Please help me
    Thanks in advance
    Thanks,
    Raju
    We have changed the below profile option to get the data in excel by default
    Profile Name Export MIME type
    Profile Code FND_EXPORT_MIME_TYPE+
    Existing Value: text/tab-separated-values+
    Change as: Excel
    Thank you,
    Raju
    Edited by: 1006649 on May 21, 2013 10:55 AM

    We have changed the below profile option to get the data in excel by default
    Profile Name Export MIME type
    Profile Code FND_EXPORT_MIME_TYPE+
    Existing Value: text/tab-separated-values+
    Change as: Excel
    Thank you,
    Raju

Maybe you are looking for