Can I temporarily change the filename when using mailDoc?

Here is the situation: I am creating a form that multiple users will open, fill out, and then click a button to email the form using the mailDoc method.
The email goes to an automated document management system that will move the attachment to a folder. If the document management system receives attachments with the same file name it creates a new version of the existing file, rather than amending the file name.
This behavior is not ideal, so I want to change the script to manipulate the name of the attachment based on a field within the form. Is that possible?

The attachment will take the name of the PDF file name that is opened. If you want to chnageth ename of the attachment you will have to save the file as a different filename first. You cannot completely automate this operation without Certifying the file. You can automate the saving of the file and allow the user to choose the new filename....but I doubt that this is what you want.
Other people have solved this by submitting the file to a web server then having the web server post the email. In this way the web server can control the filename.
Hope that helps

Similar Messages

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though.

Why can't I change the filename on the streaming server?

I ran into an interesting problem and I am unable to find an answer to this.
Here is the issue.
I encoded a file into .flv format. When I stream the file using RTMP protocol, it streams fine. However, if I change the name of the file ( I can explain why I need to do this, but assume that's part of what I need to do in our product) by appending a string, it fails to playback properly ( note: I modify the playback URLto match the new filename).
Example:
rtmp://localhost/vod/sample.flv
2 changes to make
a) change the filename to sample_mystring.flv in the content folder
b) playback rtmp://localhost/vod/sample_mystring.flv
it does not playback the video.
I am scratching my head, because this is not an expected failure. I am left to wonder if the video player ( in this case FLVPlayer) or the RTMP protocol is requiring the original filename in the stream for it to playback.
I am not familiar with the protocol or its inner-workings, but I hope someone here has some experience or thoughts to help me figure this out. I am stuck.
Thanks for your help!

I am back to testing this again, and I have the same issues
I have tried the entries as follows
<VirtualDirectory>
      
            <Streams>/;w:\files</Streams>
</VirtualDirectory>
<VirtualDirectory>
      
            <Streams>/\\remoteserver\files</Streams>
   </VirtualDirectory>
I also checked that the FMS host has access to the remote folder by first sharing the remote folder and
a) creating a common network user "fmsuser" who has access to the remote folders
b) fms startups with log in as "fmsuser".
I can't see the remote files play back. However, the local files play just fine. I also verified that the file is OK using "flvcheck.exe" in the tools directory.
Thanks for your help

How can I temporarily change the Apple ID on an iPad

I would like to share a book with my wife on her iPad. Can I temporarily change her account to just share the book and not disturb our individual apps?

If you mean that the iPad is tied to another user's iCloud account, you have to ask them to erase the device for you. You can't do it on your own. The device requires their Apple ID and password in order to turn off Find My iPad and to delete the iCloud account.
IF you just want to sign into another Apple ID (not recommended either) go to Settings>iTunes and App store>Apple ID and sign out of that ID and sign into your ID,

How can you increase/change the font size using window.print

We don't use BI/XML Publisher.
I have a button with an URL Redirect to print.
javascript:window.print();
How can I give the user the option to print with a different font or larger size or optionally to set it the same for everyone?
thanks
John

Hi,
I would think that, generally speaking, users would print from a Printer Friendly page. This is a page template that has most of the top and bottom (that is, the tabs and footers) of a normal page removed. You can switch a page to a Printer Friendly one fairly easily - see: Re: Print Report without Template for an example. As this is a separate page template, you can use printer-only styling. The downside is that you can only have one Printer Friendly page in your application, so you have to be careful to make any styling generic.
Andy

I can sign on to the iTunes store using my ID but when I want to check my billing information (to change the existing info) it wont accept my password? What do I do?

I can sign on to the iTunes store using my ID but when I want to check my billing information (to change the existing info) it wont accept my password? What do I do?

Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296

Can you change the Bitrate when you use the "Compressor" High Quality...?

I am having problems with the amount of video in DVD SP and I think I need to lower the bitrate when I compress out of FCP. Can you change the Bitrate when you use the "Compressor" High Quality setting?
Thanks,
Stone

Can you change the Bitrate when you use the "Compressor" High Quality setting?
Yes. Duplicate the preset, then customize it all you want.
-DH

Garage Band, I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band. Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band? Any solutions

Garage Band, I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band. Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band? Any solutions

10.5.8 with latest garageband 5.1 with MBOX 1. On Nov 4.09 I did a software update, now i get no output volume or input volume to the computer itself. I get it from head phones from my mbox, but not to the computer. Before the software update It worked great. I've tried upgrading software through digidesign .com, but they dont seem to have one for what i need. any way to get my old garage band back? go from 5.1 to earlier? Or maybe it was the upgrade to 10.5.8. update? Can i go back in time lol?
Any help would be appreciated
BTW
Ive tried all the system sound prefs, and garage band drivers. Back and forth.
cheers
ds

HT201365 how do i change the passcode for using my ipad that i created when installing find my iphone. the is different from my apple id and password

how do i change the passcode for using my ipad which i created when i set up findmyiphone. this is different from my apple id and password

On both your devices go to Settings>iCloud, then scroll down and click "Delete Account". You can then sign back in using your updated details.
Note: "Delete Account" will not delete data from iCloud, it will simply remove the account from your device.

How can i change the effect when i hide the windows?

how can i change the effect when i hide the windows?

System Preferences>Dock>Minimize Using>Select one of the two choices.

Display Error: The display template had an error. You can correct it by fixing the template or by changing the display template used in either the Web Part properties or Result Types. $(...).slick is not a function (OnPostRender: )

Hi Team,
I implemented news carousel using display template concepts.
Its working.
But some times it shows like some thing went wrong
when clicke on show details
it showing the error like
Display Error: The display template had an error. You can correct it by fixing the template or by changing the display template used in either the Web Part properties or Result Types.
$(...).slick is not a function (OnPostRender: )
some times showing result and while refreshing the page am getting the error like below
How to fix the issue
Regards,
Dhayanand

Hi Wendy Li,
Finally we fixed.
The prob is that we referring two different version of jquery files in master page and page layout.
We corrected by referring same version of jquery files in both pages
Regards,
Dhayanand

When I create a rectangle, I can not to change the shape of a rectangle with the cursor in illustrator CC 2014 For what?

When I create a rectangle, I can not to change the shape of a rectangle with the cursor in illustrator CC 2014 For what?

Xavigarcia,
I am afraid you have come across the Live Rectangle bug which is limited to the MAC versions starting with 10.7 and 10.8, but not 10.9 (Mavericks) or 10.10 (Yosemite). Hopefully, the bug will be fixed soon.
So a switch to Mavericks or Yosemite with a reinstallation might be the way to solve it here and now.
To get round it in each case, it is possible to Expand the Live Rectangles to get normal old fashioned rectangles, or to Pathfinder>Unite, or to use the Scale Tool or the Free Transform Tool.
A more permanent way round that is to create normal old fashioned rectangles, after running the free script created by Pawel, see this thread with download link:
https://forums.adobe.com/thread/1587587

How can I customize the toolbar when using the attribute browser

In CVI 2012, the toolbar changes depending on the environment, e.g. it is different for the source window and the UI editor. The toolbar can be customized using the menu Options / Toolbar...
Unfortunately, when using the attribute browser of the UI editor, another toolbar is displayed, i.e. not the UI editor toolbar.... I would have assumed that the attribute browser belongs to the UI editor, obviously it doesn't... So how can I customize the toolbar when using the attribute browser?
Solved!
Go to Solution.

Luis,
It's nice to have you back
Thank you for the clarification, so I'll elaborate a bit more: In the regular workspace toolbar, I have a disk symbol to save the file. This symbol is gone in the attribute browser...
So I have three different toolbars, for source code (workspace), UI editor, and the UI editor displayed but the attribute browser clicked on (selected)...
Thanks
Wolfgang
Source code:
UI editor:
Attribute browser:

Why I can not change the display when I turn the Ipad from horizontal to vertical position ?

Please help to give me the guide line to solve the problem in my Ipad
I can not change the display when I move the ipad from horizontal position to vertical position

Have you got a lock symbol at the top of the screen next to the battery indicator ? If so, then depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can lock rotation either by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
If there is no lock symbol then try a reset and see if rotates after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

How can i detach the video from a clip so i can only use the audio when using imovie?

how can i detach the video from a clip so i can only use the audio when using imovie?

First, go to iMovie/Preferences and enable the Advanced Tools.
Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

Can I temporarily change the filename when using mailDoc?

Similar Messages

Maybe you are looking for