Can I test/reset the modem?

I've got Tiger running on a 450 MHz B&W powermac. It has a built-in modem. When I ran it under Jaguar, I was able to fax with no difficulties, but now it tends to hang.
I recently installed Timbuktu on it, and discovered that although the modem is recognized in System Profiler, it is not recognized as an option in Timbuktu.
So I was wondering, is there a diagnostic app that would indicate whether or not the modem is still functioning, or perhaps something that could simply reset it, like we did way back when with external modems? I would very much like to have my faxing ability back.
Thanks

If, by chance, a fax-specific file got altered, corrupted, overwritten, or deleted by TB2, you might try reapplying the OS 10.4.11 combo update. Suggest you verify your hard drive beforehand, then repair permissions before and after reapplying the combo update.

Similar Messages

Can't connect to the modem's server.

Hi guys, I have a major problem.
When ever I connect to the internet with my modem, it works. But, when I connect to internet with my router and modem, I can't connect. But I have solved my problem by resetting both, my wireless router and modem. Then after I reconfigure my wireless router all I need to do is to log into my modem's server. But I can't connect to the modem's server. I tired logging in with "admin" (being the password) but I still can't connect to it.
I am using: Verizon Broadband Network
                 Ultra RangePlus Wireless-N Broadband Router model: WRT160N
                 Westell modem model 6100
What is the problem? Has anyone experienced this problem before?
Message Edited by machg on 04-11-2009 07:10 PM
Solved!
Go to Solution.

You will not be able to log into the modem as long as the router is plugged in
You must configure the modem first to bridge mode,then plug in the router and log into it
   1.)unplug router and have only the modem in
       go to 192.168.1.1 enter
      that will take you into the verizon modem/ if you have reset the modem then your user is; admin
                                                                                                                     your password is ; password
     once you lopg into that it will ask you to change the username/password
      just type in ADMIN in all 3 blanks
now you are logged into the modem;;;;;;go to network at the top,then network connections on the left,broadband connection ,you will then put your protocol on bridge/routed bridge,
now go to wireless settings at the top and make sure wireless is turned on
you have the option to set up a security key on basic security settings
once your modem resets then plug in your router,you are now in bridge mode and the modems connection has moved to your router. you must restart modem and computer for everything to take effect....
also make sure and refresh your network list on your laptop
Hope this works

Poor Internet Connection/Have to keep resetting the modem

For the past two months our internet service has been terrible. I've had numerous phone calls with Verizon tech support and had two technicians visit our house. Needless to say, after all new wiring in our house, updating the lines outside our house, and a new modem I still have to reset the modem several times a day and then when the internet does work it is extremely slow. The technician said my house and my neighbor's house don't even show on the grid for our local Verizon office and that the problem is somewhere between our road and their office........so how does that get fixed? Apparently the lines are too busy and it just keeps kicking us off. Has anyone else experienced a problem like this? I work part time from home and rely on my internet service. I also don't have the time to contact Verizon every single day! Help!

Hi country105,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

I have Comcast internet, my roommates PC (with viruses) runs at the speed of light while my iMac struggles. My iMac worked fine on other internet connections before we got our own internet. I've reset the modem, cleaned my Mac, still nothing helps!

As my title states, the PC works super fast and mine struggles. We have $75 internet which goes to say that our internet is mega fast. Before we got our personal modem, we were sniping other peoples internet in our apartment complex. Even with a few bars of internet from AirPort, it was going faster than our internet now. I've reset the modem, I've inserted DNS's, I've cleaned my Mac, everything I can think of. I need help. I called Comcast and they said it was my iMac. I just bought this iMac in October. It's still new to me. Comcast says it's my iMac but I do not believe them. My iMac runs fast, until I try to use the internet, so I know it's somehting with the internet. Please help, it's making me regret spending $1300 on a computer

I have asked a moderator to provide assistance, they will post an invite on this thread.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

How can I test for the bas unit enterd in a control?

How can I to create a polymorphic vi where the user can enter either volume or temperature.
how can Labwiev test for the base unit entered
pseudocode example:
input X
if X.base_unit == m^3 do .......
thanks for any suggestion to resolve or avoid my problem
Solved!
Go to Solution.

Hi schaerm,
you have to dig deeper.
An idea is this one:
The red marked word is containing the unit - in a coded way. Somewhere in the LV help you can find the description of this coding (I remember a chapter on memory representations of all LV datatypes...). (There surely is an easier or better way - but the example is done quic&dirty.)
You can also format the number into a string and analyze the unit here...
Message Edited by GerdW on 02-07-2010 07:21 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Why can't I reset the master password with the option of removing all username:passwords by unchecking "Use Master Password"?

Why can't I reset the master password with the option of removing all username:passwords by unchecking "Use Master Password"? Currently, there seems to only be the option to issue a "chrome:" command in URL which DOES reset the master password. However, it was something that I had to google. The intuitive option would be to uncheck the "Use Master Password" checkbox, receive a verification dialogue, and blammo, password reset. Please make this a feature, thank you.

''cor-el [[#answer-702776|said]]''
<blockquote>
You can remove all password in the Show Passwords dialog.
That is where you manage the passwords.
The master password is only for protecting the passwords with an extra level of encryption and has nothing to do with erasing passwords apart from resetting the MP in case you have forgotten the MP and can't open "Show passwords".
</blockquote>
Sorry, for being unclear. Essentially this is a feature request for an option under Firefox options (why not?) to reset my Master Password not knowing the Master Password. For Security reasons I understand why all the saved passwords have to be wiped, but wiping the Master Password (having forgotten it) should be an option without having to issue an arcane command that one has to google to figure out.

How can I test that the ITS is setup right and working?.

How can I test that the ITS is setup right and working?.
At present when calling a CRM transaction (BOR object) via the Nav Bar of the Webclient IC I am getting a message box with the title of 'Message from Webpage' and the content saying 'Object expected'.
I have re-checked the transaction launcher and navigation bar profile setting and these look okay, hence my question regarding the ITS and how we might test that its functional.
Jason

I assume that as I also have a call to a URL (website), which is working fine, then the ITS servicer is also working fine.
That just leads me to know identify why my BOR object is not being called correctly.
Within the Transaction launcher I have the following settings:
Entries
Launch Trans ID: ZZIC1_LT01
Component set: ALL
Technical details
Description: xxxxx
Class name: ZCL_ZZIC1_LT01
Statefull: X
Further Technical details
Transaction type: BOR Transaction
Logical system: CMDCLNT600
BOR Object type: TSTC_UIF
Method name: EXECUTE
Transaction Parameters
Parameter: Object_key
Value: CRMD_BUS2000115
Can anyone see any problems with these entries?.
what's the best way to ensure that 'CRMD_BUS2000115' is a BOR object?. I can run it as a transaction.
Jason

I have an older iMac (OS X 10.4.11), and I forgot my master password. Is there anything I can do to reset the master password?

I have an older iMac (OS X 10.4.11), and I forgot my master password. Is there anything I can do to reset the master password?

Here's the instructions if you have the discs.
Mac OS X: Changing or resetting an account password
http://support.apple.com/kb/HT1274?viewlocale=en_US
Changing your administrator password
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh655.html
Here's one method to reset the password without the install disc:
1. boot computer and hold the "apple" key and the "s" key.
2. wait for terminal show
3. release keys
4. type without the quotes: "/sbin/mount -uaw"
5. press enter
6. type without the quotes: "rm /var/db/.applesetupdone
7. press enter
8. type without the quotes: "reboot"
9. press enter
This will let you create a new admin account when you reboot your computer.
Also, without the discs, look at Mac OS X Tip - No Password, No Root, No CD? No Problem.
http://www.macobserver.com/tip/2003/06/16.1.shtml
Here is a way to get around not knowing the admin password on Macs.
To reset your OS X password without an OS X CD you need to enter terminal and create a new admin account:
   1. Reboot
   2. Hold apple + s down after you hear the chime.
   3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
          * mount -uw /
          * rm /var/db/.AppleSetupDone
          * shutdown -h now
   4. After rebooting you should have a brand new admin account. When you login as the new admin you can simply delete the old one and you’re good to go again!
 Cheers, Tom

Once again, service drops out, speed slows and I have to reset the modem lots

Here are the links to the last posts/problems:
{edited for privacy}
4/29 reset router 5 times had to go into the verizon management console (VMC) twice to enable router for WiFi
4/30 reset router once
5/2 reset router once
5/3 connection speed dropped to 2.9 reset router 6 times
5/4 connection speed dropped to 2.5 reset router twice
5/6 reset router once
5/8 reset router once
5/9 connection speed dropped to 1.9 reset router 3 times had to go into VMC to enable router for WiFi
5/10 connection speed down to 1.5 reset router four times
5/11 --today--connection speed down to 1.5 reset router 4 times--it is only 9:30 AM--four times since 7 AM? sketchy service indeed
my original post was here
forums.verizon.com/t5/High-Speed-Internet-DSL-and-Dial/What-s-up-quot-line-problems-quot-with-regards-to-high-speed/m-p/692388/highlight/true#M24452
I note with irony how you will see that someone tried to contact me...but that isn't the case. I contacted them. By phone because that was what the "Chat" customer service person told me to do. This is classic case of one hand doesn't know what the other is doing. When I do get a live person on the phone ....Basically....verizon says there is a "line problem" and I wait for three days and the speed gets better for about a week, and then the speed drops off.
They can't deliver what I am paying for. I don't have a phone, I pay for high speed internet because FIOS is unavailable. Currently as I type this....speed test says I am .9/.27...the modem tells me 1.5/.4 but it drops as well. What is the issue, Verizon?
In addition someone on Verizon's end says...someone will call you in a few hours...which never happens. Never. More like in a day or two. If that.
Buyers beware....beware,,,

Hi whit616,
We have reopened your private support case. Please access your case thread by following the instructions we have posted in your original public thread, HERE.
Please note that you need to access the private thread and respond to the agents' requests. The agents cannot begin to assist with your issue until they hear from you.

Why can't I reset the precision of my axis in a Waveform graph?

I'd like to reset the precision of the axis on my Waveform Graph. I can do this in other graphs but when I change it to a Waveform it doesn't like it. Perhaps this is because time is on the x-axis?
Anyway it comes up with the error, Invalid Property Value when I run this test VI.
Attachments:
GraphPrecisionError.vi ‏55 KB

I have reported this in the bug thread: http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=3331#M3331
LabVIEW Champion . Do more with less code and in less time .

Is there an ARD command or Unix command that I can send to reset the desktop background image to default?

I was forced to create a local user with an automatic login on all of the machines in the building. I listed off many various issues that could come arise by doing this but was tuned out. Now people are changing all of the desktop backgrounds to some pretty inappropriate images. I forewarned the person ordering this that this may be one of the many issues that would arise when doing away with our server based logins, and now I am charged with fixing every desktop every time someone changes it to something inappropriate.
Is that an Apple Remote Desktop command or a Unix command that I can send through ARD v3.5.3 to the machines to reset the desktop background image to the default Aqua Blue jpeg image located in the /MacintoshHD/Library/Desktop\ Pictures/Aqua\ Blue.jpg.
The machines that I am dealing with have OS X 10.4.11, OS X 10.5.8, OS X 10.6.8, and OS X 10.7.4 installed on them, but the OS X 10.4.11 machines are the ones that are creating the biggest issue so I would like to deal with those first.

Ya, I'd love to have the computers connected to the Xserver, unfortunately against my heeding, I was ordered to take them off of the Xserver, so they only have a local account that automatically logs in on startup, and even though I have Parental Controls set, I can not stop them from going to Safari, selecting an inappropriate image and setting it as the background, so now I’ve been ordered to fix all of the backgrounds that people are messing with.
My Xserver is running OS X 10.4.11 Server Edition. Yes, I would love a new server, but that’s not happening due to budget cuts.
So what I am hoping for is a command that I can put into Apple Remote Desktop v3.5.3 and push out to all of the computers via its Unix commands and reset all the desktops to their default image.

UBR EEM script resetting the modem

Hello,
I'm trying to find a way to perform some action on cable modem basing on syslog event. Let's take an example: I'm getting the following message in the syslog:
%UBR10000-5-UNREGSIDTIMEOUT: CMTS deleted unregistered Cable Modem XXXX.YYYY.ZZZZ
Now, I'd like the script to reset this modem when such event occurs (maybe it makes no sense to reset deleted modem but it's only example)
And now I'm looking for the way, how to use the event syslog message in the script and how to extract the MAC address of the modem from this line.
Being specific - how to get $MAC variable, having in mind that there's no regexp command on UBR IOS?
event manager applet modem_reset
event syslog occurs 1 pattern "CMTS deleted unregistered Cable Modem" period 1
action 1 cli command "clear cable modem $MAC reset"
BR,
Andrzej

Hello, Joseph,
Thanks a lot for your reply. I have followed your advice and prepare an example script, however I have an issue with extracting particular substring. This is the first time I'm fighting with TCL scripts so sorry my ignorance. Please, could you look at this and let me know what could be wrong here:
U10k#sh run | sec event
event manager environment sub4
event manager directory user policy "disk0:/"
event manager session cli username "user"
event manager applet config
event syslog occurs 1 pattern "Configured from" period 1
action 1 cli command "type $_syslog_msg | append disk0:conf_log"
action 2 cli command "show cable modem | append disk0:conf_log"
action 3 policy tcl.tcl
event manager policy tcl.tcl type user
U10k#
U10k#
U10k#
U10k#
U10k#more disk0:tcl.tcl
::cisco::eem::event_register_syslog occurs 1 pattern {Configured from} period 1
# This EEM tcl policy was generated by the EEM applet conversion
# utility at http://www.marcuscom.com/convert_applet/
# using the following applet:
# event manager applet config
# event syslog occurs 1 pattern "Configured from" period 1
# action 1 regexp "from console by [A-Za-z] on" $_syslog_msg user sub1 sub2 sub3 sub4
# action 2 syslog msg "Configuration changed by $sub4"
namespace import ::cisco::eem::*
namespace import ::cisco::lib::*
array set arr_einfo [event_reqinfo]
set _regexp_result [regexp {from console by [A-Za-z] on} $arr_einfo(msg) user sub1 sub2 sub3 sub4]
action_syslog msg "Configuration changed by $sub4"
U10k#
U10k#
U10k#
U10k#
U10k#clear logging
Clear logging buffer [confirm]
U10k#conf t
Enter configuration commands, one per line. End with CNTL/Z.
U10k(config)#int gig
U10k(config)#int gigabitEthernet 1/0/2
U10k(config-if)#shu
U10k(config-if)#shutdown
U10k(config-if)#no shu
U10k(config-if)#no shutdown
U10k(config-if)#exit
U10k(config)#exit
U10k#sh
U10k#show logg
U10k#show logging
Syslog logging: enabled (0 messages dropped, 781 messages rate-limited, 5 flushes, 0 overruns, xml disabled, filtering disabled)
No Active Message Discriminator.
No Inactive Message Discriminator.
Console logging: level debugging, 500 messages logged, xml disabled,
filtering disabled
Monitor logging: level debugging, 0 messages logged, xml disabled,
filtering disabled
Buffer logging: level informational, 1225 messages logged, xml disabled,
filtering disabled
Exception Logging: size (4096 bytes)
Count and timestamp logging messages: disabled
Persistent logging: disabled
Trap logging: level informational, 1230 message lines logged
Log Buffer (131072 bytes):
001264: Feb 19 11:39:06.647 GMT+1: %SYS-5-CONFIG_I: Configured from console by klonex on vty1 (192.168.101.197)
001265: Feb 19 11:39:06.787 GMT+1: %HA_EM-6-LOG: tmpsys:/eem_policy/tcl.tcl: Configuration changed by
001266: Feb 19 11:39:07.167 GMT+1: %HA_EM-3-FMPD_ERROR: Error executing applet config statement 3
BR,
Andrzej

How can i test if the frame is created

hi,
i am using ADFBC Swing.
i have created an MDI Frame and 2 internals frames.
in the MDI frame i put a button and i want when i press it i do a test.
if the internal frame1 is created i unload it and i create the 2.
else if the second is created i do nothing
thanks

nothing.
All sales are final

I want to transfer the data from old eMac to new-ish intel iMac. Before I do, I should disconnect internet, yes? Can I just pull the modem's cable out of the computer?

Disconnect internet first?

https://discussions.apple.com/docs/DOC-2295 Explains how to work it. And yes places like http://www.macsales.com/ offer Firewire 6 pin to 9 pin connectors which can be connected to the Thunderbolt/Firewire adapter of modern Macs or just plain Firewire 800 port on older iMac Intels.

Can you please reset the "This Device Is Already Associated With an Apple ID"

So, i had an ipod touch 4th generation 64gb and have bought any movies and music. I got an ipod touch 5th gen 64gb for christmas and backed up all my stuff from previous ipod (4th) to it. My plan was to Use the 5th gen for games an photos ans social networks. And the 4th gen for Movies an music. On the 4th gen I created a new apple ID. When I went to the store I logged into my son's apple ID, to get one movie i had purchased for him, so i could have it on my device, so i wouldn't have to buy it again. After i downloaded that, i logged in back to my original ID, not the one i used to make a new one (4th), so i could get the movies i have bought previously. When i tried to do this, this came up- "This Device Is Already Associated With an Apple ID". So now i can't download the movies i had purchased previously. Can someone tell me how to reset this. Because I really dont want to wait 90 days to download these movies.

Sorry but there is no way to override the 90 day timer once it starts.
See iTunes Store: Associating a device or computer to your Apple ID
Message was edited by: Frank Caggiano - BTW you are not speaking with Apple here only other users like yourself. Regards

Can I test/reset the modem?

Similar Messages

Maybe you are looking for