Can I transport changes thru Quality to Production without dropping data?

Hi,
I have data on a Quality system which is being used and it has become critical to extent that the Quality system is treated as Production.
Now, there have been some changes in Development: 5 new key figures and 10 new characteristics. As a result, there have been modifications in the Infosource, update rules, ODS, Multiproviders, etc on Development.
The plan is to transport these changes on Dev to Production and load data on Production for comparison against the data in Quality.
(It may sound weird but that is the plan since there are some problems on Development)
My question:
Since the changes have to go through Quality to Production, will there be problem on the data on Quality?
The goal is to freeze the data in Quality. Can the changes go through Quality without the need to drop the data in Quality?
[Note that the objects are going to Production the first time: we do not overwrite any existing objects on Production]
Thanks

Hi,
You need not do anything special while releasing the request. If anything needs to be done, Basis should do it.
For that matter, Basis should be able to copy the CO and DAT files of a particular released request, to the import queue of any SAP system and import it there. They would do that using operating system level commands.
For us lesser folks, ther are above the table methods:-)
If you go to transaction STMS in the development system and click on the 'red truck' (transport overview) you would be able to see the import queues of the D, Q and P systems.
You can double-click on each system to see the requests.
If you have released a change request, it would be exported and available in the import queues of the Q and P systems.
If the request has been imported the status will show with a 'yellow triangle'.
If the request is yet to be imported it would show with a 'green square'.
In a particular import queue, you may choose the request that is not imported and import it into the system.
Having said all this, it is quite possible that Basis may have configured the transport domain in a different manner. It is possible that the Quality system is configured for Quality assurance. That is why it is important to do this in association with the Basis team.
Since the possibilities are many, a link is attached for further reading:
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a09a7acc11d1899e0000e829fbbd/content.htm
Mathew.

Similar Messages

Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

Hey shahbazfromgbr,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
2. Make sure the Ring/Silent switch is not switched to silent.
3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
9. Restart the iPhone.
10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks,
Matt M.

I-phone 5 - can you reduce the megapixel size of pictures without incurring data charges? I understand if I e-mail my pictures to myself, there is an option to define the pixel size of the pict. What if I upload from phone to computer via cable?

i-phone 5 - can you reduce the megapixel size of pictures without incurring data charges? I understand if I e-mail my pictures to myself, there is an option available that allows me to define the pixel size of the picture I send, but I believe this process inccurs data charges.
What if I upload photos from my phone to my computer via cable? I don't believe this inccurs data charges, but I cannot find an option to reduce the megapixel size of the pictures.

i-phone 5 - can you reduce the megapixel size of pictures without incurring data charges? I understand if I e-mail my pictures to myself, there is an option available that allows me to define the pixel size of the picture I send, but I believe this process inccurs data charges.
What if I upload photos from my phone to my computer via cable? I don't believe this inccurs data charges, but I cannot find an option to reduce the megapixel size of the pictures.

Transport FG from Quality to Production

Dear All,
I have created couple of function group and transported to Quality system. Now as per the requirement I have made the changes in different FM of these FG as well as includes. So there are few versions in DEV system.
Now finally i want to transport the these FG to production system. So which transport request I have to use to move to the production?? In Quality it showing different request for each FM and include (Latest version request number).
Can anybody tell me how I can transport my all FG to the production via Quality??
Is it good way to create one more request for all FG using SE03 tcode, so that all FM with includes i have final request in DEV system which I can move to Production via Quality....
Good suggesstion are most welcome.....
Thanks in stack......

Hello Nilesh
This is quite a common problem with function groups.
However, if you have at least one system where the entire function group is complete (i.e. contains all function modules and the TOP include contains all data definitions and the frame program all additional includes) then you can go to the workbench (SE80). Right-click on your function group and choose "Other functions" -> "Write transport request entry". The CTS puts the function group into the transport request which should then be transported entirely.
I highly recommend first to "synchronize" your DEV with your Quality system, repeat the tests there and, if everything was successful, transport to Production.
Regards
Uwe

Can I use satnav on the C5-00 without using data +...

Can someone tell me if it's possible to use the satnav on the C5-00 without using data?
AND... how can I get mpas for Singapore and Malaysia - I want to have them loaded up in advance of going there
Thanks
Omar

Use the Nokia Map Loader on a PC to preinstall maps on the phone.
Map Loader comes with Nokia Suite:
http://europe.nokia.com/support/product-support/nokia-ovi-suite
In the settings you can turn off A-GPS and network based positioning, leaving only GPS, and also disable internet access for the Nokia Maps application. When you disable A-GPS and network based positioning, getting a location with just the GPS receiver might take a long time (and if you're in a city with lots of high buildings and little clear sky visible, it might be difficult for the phone to see the satellites).

Can you purchase older versions of adobe products without having to use Creative Cloud?

I think it's because of security reasons or the firewall, my work won't purchase Creative Cloud. So I was wondering if you can purchase adobe products like After effects without having to use Creative Cloud?

Yes Creative Suite 6

I want to change from Outlook to Thunderbird without losing data or email files - how can I do this?

I bought a Dell Inspiron in February when my old computer (with XP Pro and Outlook 2007) crashed. Now I have Windows 7 with Outlook 2013, which is proving to be a disaster. A colleague recommended I go to Thunderbird and forget all about Outlook. I have quite a number of files and emails in my Outlook folders and don't want to lose them if I make the switch. How can I achieve this?
Also, my wife uses Windows 7 and Outlook 2010 on her lap top. Our email addresses are very similar: [email protected] and [email protected] , which may explain some of the problems we've been having: And we use the same password, as we have always done. If Coralie stays with Outlook and I come over to Thunderbird would there be a compatibility problem? I am not too savvy with IT stuff and my wife even less so, so your help IN SIMPLE terms would be appreciated. Thanks and regards, Sylvan Bonett

Your email accounts are separate and distinct so there is no issue with any apparent similarity (unless you have done something out of the ordinary such as setting one up as an alias for the other.)
Transferring messages between email programs is rarely straightforward since there are no agreed standards for interchange of email content.
However as you're both using gmail, then you may not have a problem. If the account uses IMAP, the messages and the folders they are in are actually stored on the server, so which client (Outlook, Thunderbird or something else) you use is largely irrelevant.
If you are not currently using IMAP, then you could set up the account again, using IMAP and alongside the existing account, and simply move messages from the old to the new. This will have the effect of moving them back to the server, so they will be available to you in Thunderbird or any other email client.
I'd simply set up the account in Thunderbird, using IMAP, and see what I can see. If the messages are all there, job done. If not, set up the account in Outlook but using IMAP, and move the messages.

Can I use email thru my .mac account without ATT service contract?

All of my email comes through my .mac (mobileMe) account. If I cancel my ATT phone contract, which includes voice, will I still be able to use the email services on the iphone?

If you cancel phone service with AT&T, you can use your iPhone as an iPod Touch.
In order to install a firmware update or restore your iPhone with iTunes if wanted or needed, the no longer activated SIM card - the SIM card used with AT&T when your iPhone was activated must be inserted in your iPhone when doing so.

How can I issue a warning if user exits without saving data first?

One of our clients has his users fill the LC Designer PDFs on their web site. They request that the users get a “Do you really want to exit?” warning, if they navigate away from the form, after having made changes to it. I was able to simulate the AcroScript “Dirty” state by comparing the xfa.data.saveXML with the original document content. My problem is that I can’t seem to be able to issue the warning in time for the user to do something about it. I tried to use the DocClose event, but (as described in the documentation) there is no way for the user to go back to the document.

First you need to make sure that you have setup the machine with a valid app store account to tie the machine to the server OS. To boot the MacMini so you can do RAID setup you must boot into recovery mode. Hold down Command+R and power up. Enter disk utility go through the steps to create the RAID which will erase everything on the HD. You need to make sure the build gets completed. Once done reboot into recovery mode again and you can do a OS install. If I remember correctly this will just install the base OS. Once you have setup the machine again with the valid app store account the server app will show up in the app store for you to download.
Of course if you don't want to rebuild everything you can hook up a USB harddrive and turn on time machine. Makle sure it completes and you have several restore points. Go through the RAID build process. Once complete boot into recovery mode, with the USB drive attached, and you will have an option to restore from a time machine backup.

Can Tiger be installed on a formatted drive without losing data?

i have a mac OS formatted drive with tons of data on it that i use as a secondary storage device. my main HD just burnt out, and i was thinking of installing Tiger to the secondary drive. i know that if you install OS X on a drive that already has a previous version of the OS on it, you have the option to 'archive and install,' but this is not an option since the drive has no OS files on it. so my question is, if i choose the standard option of 'install OS X' from the install disk, will i lose my data from the drive?

As long as the drive was initialized as HFS+ (Mac Extended) you can install OSX without erasing the disk, but if that disk contains your only copy of important data you would be living dangerously. If something goes wrong (user error, software bug, power surge, hardware failure, etc.) you could lose everything.

How to Transport changes from Dev. to Quality and production

Hello Friends,
I've done the below changes in IR
1.Added idoc in Imported Idocs
2.Added new Interface Mapping
3.Added new Message Mapping
In ID:
Chagned Receiver Agreement
Changed Interface Agreement
Please let me know how i can move the changes to Quality and Production..
Pls. provide me the steps to create Transport and how to transfer.
Thanks in advance!!!
Best Regards
Prasad

Hi,
By using File system or cms you can transport, better to do the configuration steps manually to avoid ther errors.
We can do some changes to move
Moving Dev to QA changes
1.SLD: are there any changes we need to do.
If you have common SLD, then I doubt if you may need any changes on SLD side.
The Business systems you had used will be the same you may use in Q-Landscape.
2.IR: are there any changes we need to do.
---> No changes required, you need to export .tpz file from Development box and have to import it in Q-box
3.ID: do we need to recreate it fully or after importing,just change the Communication channels will
do.I am confused here.
You need to reconfigure all communication channels, if SLD changes are OK then business system will
change automatically and in communication channel just filled in correct IP/password etc.
---> Similar to IR, you can transport these objects also. But you may need to do related changes to communication channels, if you will be referring to different Sender systems and Receiver systems.
Then as mentioned in previous posts you may need to maintain those Business systems in SLD also.
4.RWB: such as alerts,and if there are any...
--> The Alerts will not be transported....you need to create it as new setup for every box.
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/09/88f339db9911d2b41a00609419f767/content.htm

Reg: Error while transporting from Quality to Production

Hi ,
I am facing a problem while transporting ODS from quality to production.. The same works perfectly when i transport from Dev to quality.
The Error Displayed while transporting is
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type
The creation of the export DataSource failed
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object
The creation of the export DataSource failed
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when resetting DataStore Object to the active version
Kindly give me some suggestion ..
Thanks in advance
Regards
Guru

go to the source system RFC connection in SM59 and do a remote login - if you get the login page there then there is an issue with the RFC connection. also check if any other system is using the same RFC.. we had a situation where th R/3 connection was being used by 3 BI instances and everytime we reset the password , another system would lock the sme , ultimately we identified the systems and did a password reset in all the systems and then the issue got resolved.
but then we also faced the same issue you faced and it was related to login issues - check the remote login and that will tell you.

How i can transport request created in R3AR2 from Quality to Production ?

Hi, Gurus !
I'm new in CRM 7.0, and need your help. Well, we made our implementation in 7.0 version, and the things will be fine, until the start of work.....
Well, the initial download of CUSTOMER_MAIN (in transaction R3AR2) do'n't run OK, because a lot of customers in selection have a bad data.... and this time, anybody change this data,
Today, i know how to re-made this task.....
But my question is : how can transport this request, created in R3AR2, from Quality to Production ?
If the transport is not possible, the answer for the question is remake the request in Production ?
Thank you very much.....
Loduca

Did you put your development in a transport when you first saved it? If yes, and if your transport system is properly configured you can release the transport using SE09 and import it into the production using transaction STMS.
Markus

Error while transporting the request from quality to production of BI

Dear all,
When transporting a request (which contains elements of correction - in Bex designer) from quality to production of BI the following error is displayed and the request transport fails. Can the experts throw some light on this.
           Execution of programs after import (XPRA)
           Transport request   : RBDK904992
           System              : RBP
           tp path             : tp
           Version and release: 372.04.04 700
           Post-import methods for change/transport request: RBDK904992
           Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20080406140407
           Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
           Error when activating element EY2CXLKXP5X5AY0RQ2XKN9EX8
           Element 5E4II2344I3JG4R6ACMYQ441Z is missing in version M
           Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
           Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
           The errors affect the following components:
             BW-WHM (Warehouse Management)
           Post-import methods of change/transport request RBDK904992 completed
               Start of subsequent processing ... 20080406140407
               End of subsequent processing... 20080406140408
           Execute reports for change/transport request: RBDK904992
           Reports for change/transport request RBDK904992 have been executed
               Start of................ 20080406140408
               End of.................. 20080406140408
           Execution of programs after import (XPRA)
           End date and time : 20080406140408
           Ended with return code: ===> 8 <===
Thanks in advance.
Regards,
M.M

Hi,
First try to figure out the object type from the text obtained by following steps above.
Goto Development server ,create fresh request (using transport connection) , transport to QA and then in to production.
After successful transfer of the request for this object ,try to reimport the request which caused error and it should go smoothly without any error.
Hope it helps.
Regards
Mr Kapadia

Cannot transport from quality to production due to syntax error

Hi all,
I have modified the program in Development system in which i have added on field to the internal table structure. Internal table is declared in the top include of the program. Now the program is transported to the Quality server which ends with the error for top include as"Original object cannot be replaced". But when i check the top include in quality server, the field which i have added is available. Now for transporting to production server, it ends by syntax error saying "The data object ITAB does not have a component called <field>".
Please guide me for the above error.
Thanks & Regards
Akshay Korade

>
Akshay Korade wrote:
> The production system contains the version before the changes and the error comes while transporting to production system. So the changes are not reflected in the production system.
I've been doing SAP for a while and I can tell you, definitively, that syntax errors do not prevent import.
>All the includes are activated and free from syntax errors in quality system.
>Now for transporting to production server, it ends by syntax error saying "The data object ITAB does not have a component called <field>".
If there are no syntax errors in quality, then where is that syntax error showing? It must be in production. It will be an inactive version in production that has the syntax error. Go into production, try to activate the program. Activation will fail because of the syntax error.
You get the syntax error because the defintion has not made it into P. If you transport the whole program, as R3TR PROG zprog, and have the correct flags set on import to overcome the message "Original object cannot be replaced", then your problem will be solved.
matt

Can I transport changes thru Quality to Production without dropping data?

Similar Messages

Maybe you are looking for