Can I tunes support two sound cards?
I'm a DJ that has recently been converted to a MacPro. I know that I can guy an airport extreme and use that to play the music form itunes, and preview the songs through my computers speakers.
Can I use an external USB soundcard in the same way? Or can itunes only interface with the macbook internal soundcard and the airport extreme sound?
You can set your computer's sound output to the USB audio device but this will put every sound your computer makes to the same device, not just iTunes.
You might find useful the free utility SoundSource, available at Rogue Amoeba Freebies. It puts a menu in the right side of the menu bar allowing you to choose which sound device to use.
I have not used their Audio Highjack or Audio Highjack Pro. It seems to be for recording audio from an application. Perhaps it will allow you to redirect sound.
Similar Messages
-
KT880 Delta LSR doesn't support second sound card?
Hello,
I've just bought my new KT880 Delta board because of burning my old KT4V.
In my last configuration Ii had sound on bord (5.1) and one sound card added for microphone and headphones.
Now i can't force my KT880 Delta LSR to support two sound card on the same time. When I don't plug PCI card system support card-on-board.
But when I add this PCI card system dosen't see onboard card. In BIOS onbord card is turned on.
What should I do to solve my problem?
BRGDS
Max.Quote from: Doctor Stu on 24-May-05, 04:34:01
maxisus, maybe the PCI card is conflicting with onboard?
have you tried the PCI sound card in another slot?
No, i didn't try. I thought that is no different witch pci slot you use.
Quote from: Doctor Stu on 24-May-05, 04:34:01
did you do a fresh install of windows when you replaced the mobo?
yes, i've formated hdd and installed all once again
Quote from: Doctor Stu on 24-May-05, 04:34:01
also KT880 probably needs more power than KT4V - if your PSU is now not powerful enough, some devices cannot start up correctly.
I have got 350 Watt - i bought new because of special 4-pin plug for CPU. In the shop gays sad PSU should be enought for my configuraction of pc. -
Two versions of Premiere two sound cards when capturing
We are television station and we encode shows that are sent to us on a daily basis. All shows that we get we are licensed to show. We are using Adobe Premiere CS4 to capture the videos as they come to us by way of satellite feed. It works well. We can also work on another project with CS4 while capturing. Problem. Sound. While we are capturing, we cannot test the sound because the capture and the time line work space uses the same sound card. Is there a way that we can set up two sound cards and have the time line work space use one while the capture uses another? Or can we use another version of Premiere, (we also have 2.0), and have that one assigned to a separate sound card so we can edit other shows while we are capturing?
Maybe use OnLocation for the capture process, while using Premiere for the other stuff.
-
I'm having problems to enable the sound on my home destop pc.
I've got two sound cards one onboard and one I bought later.
Alsa is installed and everything is unmuted but it still dosen't work. What can I do to solve the problem?upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.59
!!Script ran on: Thu Aug 19 09:11:56 UTC 2010
!!Linux Distribution
Arch Linux \r (\n) (\l)
!!DMI Information
Manufacturer: Dell Inc.
Product Name: Dell DM051
!!Kernel Information
Kernel release: 2.6.34-ARCH
Operating System: GNU/Linux
Architecture: i686
Processor: Intel(R) Pentium(R) D CPU 2.80GHz
SMP Enabled: Yes
!!ALSA Version
Driver version: 1.0.22.1
Library version: 1.0.23
Utilities version: 1.0.23
!!Loaded ALSA modules
snd_cmipci
!!Sound Servers on this system
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
0 [CMI8768 ]: CMI8738-MC8 - C-Media CMI8768
C-Media CMI8768 at 0xcc00, irq 18
!!PCI Soundcards installed in the system
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
03:02.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
!!Advanced information - PCI Vendor/Device/Susbsystem ID's
00:1b.0 0403: 8086:27d8 (rev 01)
Subsystem: 1028:01d2
01:00.0 0300: 10de:0402 (rev a1) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
03:02.0 0401: 13f6:0111 (rev 10)
Subsystem: 13f6:0111
!!Modprobe options (Sound related)
snd-pcsp: index=2
!!Loaded sound module options
!!Module: snd_cmipci
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
fm_port : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
joystick_port : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
mpu_port : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
soft_ac3 : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 9 Aug 19 11:09 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 3 Aug 19 11:09 /dev/snd/midiC0D0
crw-rw----+ 1 root audio 116, 8 Aug 19 11:09 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 7 Aug 19 11:10 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 6 Aug 19 11:09 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 5 Aug 19 11:09 /dev/snd/pcmC0D2c
crw-rw----+ 1 root audio 116, 4 Aug 19 11:09 /dev/snd/pcmC0D2p
crw-rw----+ 1 root audio 116, 10 Aug 19 11:09 /dev/snd/seq
crw-rw----+ 1 root audio 116, 2 Aug 19 11:09 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Aug 19 11:09 .
drwxr-xr-x 3 root root 240 Aug 19 11:09 ..
lrwxrwxrwx 1 root root 12 Aug 19 11:09 pci-0000:03:02.0 -> ../controlC0
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: CMI8768 [C-Media CMI8768], device 0: CMI8738-MC8 [C-Media PCI DAC/ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: CMI8768 [C-Media CMI8768], device 1: CMI8738-MC8 [C-Media PCI 2nd DAC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: CMI8768 [C-Media CMI8768], device 2: CMI8738-MC8 [C-Media PCI IEC958]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: CMI8768 [C-Media CMI8768], device 0: CMI8738-MC8 [C-Media PCI DAC/ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: CMI8768 [C-Media CMI8768], device 2: CMI8738-MC8 [C-Media PCI IEC958]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------Mixer controls for card 0 [CMI8768]
Card hw:0 'CMI8768'/'C-Media CMI8768 at 0xcc00, irq 18'
Mixer name : 'CMedia PCI'
Components : ''
Controls : 41
Simple ctrls : 22
Simple mixer control 'Master',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%]
Front Right: Playback 31 [100%]
Simple mixer control '3D Control - Switch',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch pswitch-joined cswitch penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 255
Front Left: Playback 255 [100%] [0.00dB] [on] Capture [off]
Front Right: Playback 255 [100%] [0.00dB] [on] Capture [off]
Simple mixer control 'Synth',0
Capabilities: pvolume pswitch pswitch-joined cswitch penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 24 [77%] [on] Capture [off]
Front Right: Playback 24 [77%] [on] Capture [off]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch cswitch penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 13 [42%] [on] Capture [off]
Front Right: Playback 13 [42%] [on] Capture [off]
Simple mixer control 'Line-In Mode',0
Capabilities: enum
Items: 'Line-In' 'Rear Output' 'Bass Output'
Item0: 'Line-In'
Simple mixer control 'CD',0
Capabilities: pvolume pswitch cswitch penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 6 [19%] [on] Capture [off]
Front Right: Playback 6 [19%] [on] Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pvolume-joined cvolume cvolume-joined pswitch pswitch-joined cswitch cswitch-joined penum
Playback channels: Mono
Capture channels: Mono
Limits: Playback 0 - 31 Capture 0 - 7
Mono: Playback 6 [19%] [on] Capture 0 [0%] [off]
Simple mixer control 'Mic Boost',0
Capabilities: pswitch pswitch-joined cswitch cswitch-joined penum
Playback channels: Mono
Capture channels: Mono
Mono: Playback [on] Capture [off]
Simple mixer control 'Mic-In Mode',0
Capabilities: enum
Items: 'Mic-In' 'Center/LFE Output'
Item0: 'Center/LFE Output'
Simple mixer control 'Phone',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 7
Mono: Playback 0 [0%] [on]
Simple mixer control 'IEC958 5V',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Copyright',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 In Monitor',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 In Phase Inverse',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 In Select',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 In Valid',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Loop',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Output',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 3
Mono: Playback 2 [67%] [on]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch cswitch penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 15
Front Left: Playback 6 [40%] [on] Capture [off]
Front Right: Playback 6 [40%] [on] Capture [off]
Simple mixer control 'Four Channel Mode',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
!!Alsactl output
--startcollapse--
state.CMI8768 {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'Master Playback Volume'
value.0 31
value.1 31
control.2 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name '3D Control - Switch'
value true
control.3 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'PCM Playback Switch'
value true
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'PCM Capture Switch'
value.0 false
value.1 false
control.5 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'Synth Playback Volume'
value.0 24
value.1 24
control.6 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Synth Playback Switch'
value true
control.7 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 4
iface MIXER
name 'Synth Capture Route'
value.0 false
value.1 false
value.2 false
value.3 false
control.8 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'CD Playback Volume'
value.0 6
value.1 6
control.9 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'CD Playback Switch'
value.0 true
value.1 true
control.10 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 4
iface MIXER
name 'CD Capture Route'
value.0 false
value.1 false
value.2 false
value.3 false
control.11 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'Line Playback Volume'
value.0 13
value.1 13
control.12 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Line Playback Switch'
value.0 true
value.1 true
control.13 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 4
iface MIXER
name 'Line Capture Route'
value.0 false
value.1 false
value.2 false
value.3 false
control.14 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
iface MIXER
name 'Mic Playback Volume'
value 6
control.15 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Playback Switch'
value true
control.16 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Capture Switch'
value false
control.17 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 3'
iface MIXER
name 'Beep Playback Volume'
value 2
control.18 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 15'
iface MIXER
name 'Aux Playback Volume'
value.0 6
value.1 6
control.19 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Aux Playback Switch'
value.0 true
value.1 true
control.20 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Aux Capture Switch'
value.0 false
value.1 false
control.21 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Boost Playback Switch'
value true
control.22 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 7'
iface MIXER
name 'Mic Capture Volume'
value 0
control.23 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 7'
iface MIXER
name 'Phone Playback Volume'
value 0
control.24 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Phone Playback Switch'
value true
control.25 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Beep Playback Switch'
value true
control.26 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Boost Capture Switch'
value false
control.27 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Four Channel Mode'
value true
control.28 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Line-In
comment.item.1 'Rear Output'
comment.item.2 'Bass Output'
iface MIXER
name 'Line-In Mode'
value Line-In
control.29 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Output Switch'
value true
control.30 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 In Valid'
value true
control.31 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Copyright'
value true
control.32 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 5V'
value true
control.33 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Loop'
value true
control.34 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 In Monitor'
value true
control.35 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface PCM
device 2
name 'IEC958 Playback Default'
value '0082000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.36 {
comment.access read
comment.type IEC958
comment.count 1
iface PCM
device 2
name 'IEC958 Playback Con Mask'
value ffffffff00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
control.38 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 In Select'
value true
control.39 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 In Phase Inverse'
value true
control.40 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic-In
comment.item.1 'Center/LFE Output'
iface MIXER
name 'Mic-In Mode'
value 'Center/LFE Output'
control.41 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 255'
comment.tlv '0000000100000008ffffec1400000014'
comment.dbmin -5100
comment.dbmax 0
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
--endcollapse--
!!All Loaded Modules
Module
ipv6
fuse
snd_seq_dummy
snd_seq_oss
snd_seq_midi_event
snd_seq
snd_pcm_oss
snd_mixer_oss
snd_cmipci
gameport
snd_pcm
snd_page_alloc
snd_opl3_lib
snd_timer
snd_hwdep
snd_mpu401_uart
snd_rawmidi
snd_seq_device
usbhid
hid
usb_storage
snd
soundcore
led_class
evdev
nvidia
i2c_i801
iTCO_wdt
iTCO_vendor_support
intel_agp
uhci_hcd
e100
mii
psmouse
i2c_core
agpgart
dcdbas
thermal
sg
button
rt2870sta
pcspkr
processor
serio_raw
ehci_hcd
usbcore
rtc_cmos
rtc_core
rtc_lib
ext3
jbd
mbcache
sr_mod
cdrom
sd_mod
ata_piix
pata_acpi
libata
scsi_mod
!!ALSA/HDA dmesg -
KT4 Ultra, I can install or detect the Sound Card.
I have a KY4 Ultra, model MS-6590 (v1.X), G52-M6590X6.
I can install, or detect the sound card. In the manual I found an option to enable or disable the Audio Controller, but in my MOBO, I can´t find this option.
The Windows 98SE can detect the Multimedia Card, and I tried to install manually with the "Drivers CD", but in the begining of the instalation, appears a message saying that there can detect the Sound Card.
What can be that ?Quote
Originally posted by maesus
Do you mean in your MOBO as in hardware? The option to enable/disable the audio controller is inside the BIOS settings. Press DEL when you see the POST screen should lead you to the BIOS settings.
Where in the BIOS? I certianly cannot find it on my 6590 v4.0 board. -
Can the 2008 Mac Pro (MacPro3,1) support two graphics cards?
I have a 2008 Mac Pro, I want to know if I can run two graphics cards in tandem?
I currently have a ATI Radeon HD 5770 installed for 1GB of graphics, I want to find out if It's also possible to run a second card to increase the total graphics power of the machine?
I see two possible options;
First, run the HD 5770 in one of the PCI Express 16-lane slots, and the old NVIDIA GeForce 8800 GT in the other available 16-lane slot; for a total of 1.5GB GPU power.
Second, would it be possible to run two ATI Radeon HD 5770 cards, in each 16-lane slot; for a total of 2GB of GPU power.
I realise that this would first require a power supply upgrade, as my machine only shipped with a 318 watt power supply. (Which would not support running two high-end cards.)
It would be very useful.
Thank you for any advice.
Regards,
Peter.Thanks for the information!
I wouldn't have thought there would be enough power capacity in the current supply to run two cards. - Would this mean OS X will only see one card whilst the other sits as inactive hardware? (Or does it mean that that the system will see two different cards?
For example:
Would it be possible to use one card for a graphics intensive process in Adobe Photoshop, and use the other card separately with another application such as Final Cut Pro or Adobe Premiere Pro?
Also, how would a 64-bit application like Adobe Photoshop which has GPU acceleration utilise the setup? Would it only be ably to use one card at a time (per process)? Or could it utilise both cards at once to in essence get twice the graphics acceleration than if only using a single card?
Simply, can OS X assign each card to a different application/process? I hope that makes sense.
Also, any thoughts on how Bootcamp would handle two cards (since crossfire should be available in Windows?
Before I commit to purchasing a second 5770, would you seeing if my Mac will run the current card + the old NVIDIA 8800 gt?
Thanks in advance. -
DC7700 can't detect and install sound card after update to Windows 7
I've been trying to get the sound on my HP DC7700 Ultra Slim desktops to work for a few months now (I'm a teacher at a high school, so I have about 100+ of them to take care of). I've upgraded them from XP to Windows 7, and the computers no longer recognize the sound card.
I have tried installing the Realtek driver from their site and HP's, I've tried updating the UAA architecture as suggested in other posts here and here.
In device manager, all hardware has been detected and correct drivers have been installed, including PCI and chipset drivers.
Randomly, ONE DC7700 with a unique hard drive worked. I painstakingly checked every single driver installed and found the two that were different:
"Realtek High Definition Audio" under "Sound, video and game controllers"
"High Definition Audio Controller" under "System devices"
Pictures of the driver details for both are posted below.
I am completely at a loss as to how to accomplish this successfully, and I appreciate any help. Our school is depressingly poor, and without sound videos are completely useless to them.
Thank you in advance for your time,
Kris BrackebuschHi, Kris:
Try reinstalling W7 on one of them that doesn't have audio.
On that model, W7 should be installing a generic HD audio driver that works and then you can install the Realtek HD audio driver either from the dc7700 support page or the latest one from Realtek.
You do not need the MS UAA Bus driver, because that is only for XP.
UAA is included native to Vista and newer versions of Windows.
I do not recommend you install it in an effort to resolve the issue.
I have worked on dc7600's dc7700's and the newer Elite 8xxx models, which all have the Realtek HD audio chip.
Never had a problem getting the sound to work right from the upgrade.
The HD audio is the driver that Windows installs natively.
The Realtek HD audio driver is from Realtek. -
Can't find the original sound card
I have an HP Media Center m7334n desktop pc with xp multimedia. It came with a Realtec sound card, and I installed a second C Media sound card to use with an external interface. It was set up so that the Realtec handled all sounds for the pc such as watching video or listening to audio, and the second sound card worked only with the selected external device.
For some reason, I no longer have sound for audio or video through the Realtec. The C Media card still works fine with th external device, but I get no audio through the PC speakers. I have tried plugging the PC speakers into a different PC and they work fine. I have also tried plugging different speakers into the HP pc, but still have no audio. Also, I can't 'see' the Realtec card when I go to Device Manager. I have tried resetting On-board Audio to Automatic in BIOS, but that did not help.
Any suggestions would be greatly appreciated - thanks!I suggest reinstalling the Realtek driver. Also, check to assure that all boxes are checked correctly in the Control Panel.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Can JMF capture audio from sound card?
I want to know if JMF can capture sound/audio from the sound card. Until now we have been capturing audio from microphone. but is there any possibility of capturing audio from sound card using JMF.
The audio captured from the sound card is to be streamed using JMF/RTP API.Dear seniors,
i have tried to display my audio file as a graph as
x axis being the Time and the y axis beeing the frequency/pitch.
look at this post, i have mentioned all here...
http://forum.java.sun.com/thread.jspa?messageID=3073027�
is it possible to display as i desired?
wht the audio stream has? is it frequency or pitch?...
pls do give me some tips on that...
thanx in advance
-Munas. -
How can I record what the sound card is outputting?
I have an app. that I need to be able to capture what the
sound card is outputting. That is I want to record anything that plays
from the sound card. I don't want to
have to route the speaker out to the mic in. Is there a way to
"capture" the sound as it is being played?
Thanks
BobAs I understand you would like to record the sound (wave, midi, others...) generated by a third party application without a cable loop between soundcard output and any soundcard input (mic, line, aux).
Have you already tried to set the record input on the recording control panel of Windows to stereo mix and to use any standard labview vi (eg: snd read waveform) for recording?
Tomi
Attachments:
Setting of record input.png 59 KB -
Ask Expert: Can Cisco ASR support two Proxy in one service Group ?
Now I configure ASR for support two proxy server in one service group. I tried to configure, it works only one proxy server when i enable two proxy it cannot redirect to outside? I'm not sure it bug or not? Is there anybody found this problem
Now I configure ASR for support two proxy server in one service group. I tried to configure, it works only one proxy server when i enable two proxy it cannot redirect to outside? I'm not sure it bug or not? Is there anybody found this problem
-
Can mac mini support two monitors?
how do you configure setup using two separate monitors with Mac Mini?
Yes, you can have two monitors.
The Mid 2010 Mini has
1 × HDMI Port (Includes HDMI to DVI Adapter)
1 × Mini DisplayPort
The Mid 2011 and late 2012 have
1 × HDMI Port (Includes HDMI to DVI Adapter)
1 × Thunderbolt Port
You can purchase a mini display port to DVI and mini display port to VGA adopters. Those adopters also works with the thunderbolt port. -
Can one laptop support two iPhones
My wife has an iPhone 6 as do I, but she doesn't have a computer with which to back it up.
I have a laptop that I use to back up my phone. My question is, can I back up her phone on
my laptop along with mine?Using More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library. Note that once done you cannot "share" apps under a single Apple ID. Each of you must purchase your own apps under your own Apple ID. When you decide to split up like this one of you will need to re-purchase the apps that they want to use.
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax. -
Can a sound card be configured to both output and input audio?
I am building a radio tester and would like to output a 1 kHz tone from the laptop's sound card, and then after its been through the radios, input the audio signal again and carry out a SINAD measurement on it. I can get the VI's to carry out each operation separately (that is, get one to produce and output a 1 kHz tone, and the other to read an input audio signal and produce a SINAD measurement), but I can't get the two to work together as required.
I think the problem is to do with the device number. In both VI's the device number is set as 0, so does this cause a problem when running them together. The tone is being generated fine, but but it appears that this is what the SINAD VI is measuring, not the input coming from the radio.
Does the device number refer to the sound card itself, and if so, is it possible to distinguish between the audio in and audio out ports?
Any help would be appreciated."bigdog" <[email protected]> wrote in message
news:[email protected]..
> Thanks unclebump,
> looks like I can't output audio and input audio on the same sound card at
the same time. Can anyone confirm if that is the case, and if so,
suggest a way around the problem.
> As you can probably tell I'm very much a novice when it comes to
Labview. Any help will be gratefully received.
> BD
You certainly can - just look at your Windows Soundcard settings and play
with them for a bit. Are you using Line in and Line out? (speaker that is).
What I do is test them separately then together.You don't need two sound
cards by the way though you must inhibit line in so it doesn't play through
the speakers otherwise the input and output get mixed together.The otehr
problem you should have is that teh sine wave will sound as if it is
intermittant - there is a fix for this.
Tam -
Hp envoy m6 sound card, simmple pass application and support assistant is not working properly
i have hp envoy m61204tx.
after upudate using hp support assistant sound card is not working properly also when i run hp simple pass or hp support assistant only start window appears then it hides nothing happend next.
please guide me what is the problem and how to solve it.
any help will me much appriciated.
Thanks.@alki,
I understand that sound has quit working after support assistant ran a few updates.
Press Windows Key + X and select device manager. The sound card should be listed in the sound section. What status is displayed for the sound card?
What is the status of the mute key on the notebook? Does it have an amber light?
What happens if you try to install this driver?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
Maybe you are looking for
-
I ran a disk utility scan and chose to repair my HD.
The follow message came up: Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired. Not sure what to make of this.
-
Adapter Exchange Program Request/Shipment Status Support or Contact Info
If I submitted an adapter exchange request online on 14 October 2008 and have not yet received the new adapter and return shipment info for the old adapter, how do I request follow-up assistance/support using the Online Assistant or directly via e-ma
-
My itunes wont play any movies ive purchased, just crashes it, what will stop this?
ive reinstalled twice and keeps happening.
-
Table join and Logical databasein a same query
Hi Experts, I have an existing query which is created using table join. I now want to add a logical database in the same infoset. Is it possible to add a logical database in the same infoset? Regards, Prakhar
-
Hi Experts, Our current BW database structure is like below: DB Size - 180,803 MB Size Used - 180,627 MB Free - 176 MB Logical Files used by SQL server are, DATA1 - Size (66,417) - Used (66,256) - Free Disk (15,014) DATA2 - Size (55,289) - Used (55,2