Can I turn my airport extreme when not in use?

can I turn my airport extreme when not in use?

Why?
The power saving will be negligible, and it may take time to re-establish a connection to your ISP's Network.

Similar Messages

How to turn the airport off when not in use

My airport network is currently running 24/7. I'm away from home a large part of the day. Is there a way to disable it, and then re-enable w/o unplugging it from the wall?
Thanks.

Home Depot and Lowes have simple electronic timers that plug into the AC socket that will allow you to set auto ON/OFF times. The Express would plug right into the device.

Can't turn on airport Extreme

Started having problems a few months back. Kept being thrown out of internet and had to go through a routine of switching off broadband box (o2 supplied) and rebooting laptop. For some time you could be logged on for days and then get thrown off at the weekend. This made us think that it was an o2 problem. Recently you were thrown out of the internet every few minutes and now I can't get it at all. All the lights are shown on the broadband box. When I click on the Airport icon to turn on nothing happens. When I get it to re-san it can't find anything. o2 say that it is my computer. Is it more likely to be the computer or the broadband box?
Frustrated!

Willygate wrote:
2) I cannot see what you mean about moving Airport from the left to the right. Airport is nested within networks and when you click on airport, there is no option to delete
That message doesn't say anything about "to the right". I also don't understand what you mean by "Airport is nested within networks".
To delete an connection method in the Network panel of System Preferences, if the lock icon at the bottom is "closed", click on it, then enter your administrative password. Then select the AirPort connection item on the left and click on the "-" sign at the bottom of the column.
3) I can't see how to define a new location - this is set as automatic
Pull down the "Location" list, select "Edit Locations" at the bottom of the list, then click on the "+" sign at the bottom of the list.
4) I don't have a file system configuration file within Library/preferences
Open your boot drive. Within that window open the "Library" folder". Within that open the "Preferences" folder. Within that there will be a folder named "SystemConfiguration". Drag that onto your Desktop for temporary keeping. Restart your Mac. At this point you may need to declare some things like your network password. See if things now work any better.

A way to turn the software "off" when not in use.

JUSTIFICATION :
Java software is not compatible with Solomon (my company's time card/financial system). I have to literally install the software everytime I use usps.com, and want to print out a shipping label, for instance, and then uninstall Java again. This happens a few times a year...about every 1-2 months or so. Very tedious. Any advice?

Your company software probably has a bug and definitely wasn't tested enough.
If nothing else and you are a developer then just ask for another computer.

Turn off airport extreme

How can I turn off airport extreme during certain times of the day so my kids can't use wifi?

You might want to take a look at the Timed Access settings in AirPort Utility, which will allow you specify the times each day that everyone will be allowed to connect to the network.
Or, you can individualize this, and the set up individual "rules" for each of the kids' devices that allow them to connect using certain times each day....while your devices have unlimited access.

HP Officejet 6500a Should I turn it off when not in use?

Is it better too turn off the printer when not in use for short periods say 2-4 hours? or days? (the manual does not explain this adequately) Thanks

Hi,
I normally turn my printers off to save few cents of electricity. No point to keep printers on unless you are having/doing business (expecting fax or something). Even at work, for a long weekend, we always turn our printers off.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My new AirPort Extreme will not turn on anymore, no lights when plugged in.

My new AirPort Extreme will not turn on anymore, no lights when plugged in. I just bought it a few days ago. It has been working fine. I left the house for most the day and when returning home it would turn back on. I have tried to plug it into other outlets...nothing, I've tried the reset button...Nothing.

That is reported here a few times.. just take it straight back to apple or place of purchase for immediate exchange.

The USB port on my 4th generation Airport Extreme does not recognize any peripheral devices whatsoever. In other words, it does not function at all. What can I do?

I have had my Airport Extreme for almost a year now. I have not been able to get it to work. It has never worked. I have tried everything in the apple manuals, my peripheral device manuals, and online help. My Airport Extreme Base Station has a completely dead USB port. The USB connector does have voltage and ground. Apparently there is no data transfer. I do not know how to test the data pinouts. I don't know if it is a software or driver problem, or if it is a hardware or wiring problem. My computer is a mid-2009 13" MacBook Pro. All of my external devices work well with the MacBook Pro. The USB functionality on the MacBook Pro has always performed without a glitch. It seems the problem with the Airport Extreme must either be a network communication problem or a hardware/hardwire problem. I bought the Airport Extreme to build a home inTRAnet network. I have a seperate 3rd party router for inTERnet. Contrary to what the manuals declare, the initial setup of my Airport Extreme requires inTERnet setup during the process. Even when the choice is made to limit the network access to LAN only, when I reach the end of the setup process, a prompts reads that the Airport Extreme may not function because I have not set it up for inTERnet with the WAN. Well, Dah... during the intial stages of the setup I told the machine to configure an inTRAnet only LAN setup. So... I went ahead and set it up for inTERnet and WAN. Either way, the USB port is not working. Then I set it up for the whole package, WAN, LAN, and everything. Still... no function out of the USB port. Any ideas?
P.S. The Ethernet works and so does the 802.11 tranceiver. The USB port is the only problem, but a major, major one for my needs. There is no peripheral functionality.

Okay so I figured it out. I inherited the Configurator already set up so I didn't realize that our former administrator was brilliant and set things up a little differently. To anyone else who finds themselves in this spot try this:
After you plug the iPad in and open Configurator instead of trying to 'Prepare' the device click 'Assign'
There should be groups of Users listed on the left hand side of the screen.
Select the group you want the ipad to be a part of, or make a new group. ***Note a group can be one person so this is a good feature for teachers to have individual app assignements for students.
After you select the user group click the little plus ( + ) button on the bottom of the screen under the second column of info where names and device serial numbers should appear.
Type the name of the person, group, whatever you want to identify that assignment by into the blank that pops up after you hit the plus ( + )
Then select the assignment you just made and tohe 'Check Our' button at the bottom. At this point a box will pop up with a window at the top listing all devices supervised by Configurator. There is a tiny down arrow button that opens a scroll down menu to the right of this box. Click that, then select the device connected by USB as the one to assign.
The name of the assignment you gave it will show on the lock screen now and you can assign apps and profiles to the device like you would any other device in your Configurator inventory.
Good Luck.

Imac will not connect to Airport Extreme when configured WPA/WPA2

Imac will not connect to Airport Extreme when configured WPA/WPA2
Posted: Jul 5, 2007 8:22 PM Reply
I just got my Imac to connect to the internet using my Airport Extreme but only by using WEP. I had my Windows XP SP2 machines connecting using WPA/WPA2 with no problem. The Imac will not connect using anything other than WEP, and 1 of the XP machines will not connect using WEP.(I have not tried the other XP machines) I had to set the Airport Extreme for an open network in order to let both computers access the shared hard drive and access the internet.
I don't know what the problem might be and would appreciate any suggestions.
MacBookPro, Imac Mac OS X (10.3.9) Fujitsu tablet PC, 2 XP desktops

hehe...on the visuals. I figured it out already, and I have the old airport card. However, I did a chat with Apple support and while we were chatting I found a USB adapter with MAC drivers which will work. It is:
Hawking Technology HWUG1A Wireless-G USB Adapter with Removable Antenna for Macintosh
Manufacturer Part# HWUG1A
That is the only adapter that actually does WPA/WPA2 that I can find that is for a Mac and not just an older USB that only does WEP. It surprises me that Apple does not have a USB product like this. Anyway, for $56 including shipping, I will have it by Monday or Tuesday. Pretty cool.
Thank you so much for your assistance. It is appreciated.
Lynn

Can I access my files stored in the hard disk connected to airport extreme when I am away? how?

Can I access my files stored in the hard disk connected to airport extreme when i am away? How?

You can't technically. iPads cannot directly read HDDs like a computer can.
You will need an app liie FileBrowser to do this. Of course all file operations will be done through the App itself.
https://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8

Can an older Round Airport Extreme and Airport Express be used on my home WIFI network?

I recently upgraded my Macbook Pro to a newer one because I was having problems with the older one getting on my home WIFI network. It had been dropped, but had continued working without any hiccups for five or six months. Suddenly it won't go online. It said there was no WIFI hardwae installed. I suspect that the WIFI antenna connection between the main bdy and the display failed. Repair options at the Apple Store were iffy, so I just baought the new one. My Time Machine backup smoothly cloned my old machine onto the new one.
In the "when it rains it pours" category, my Airport Extreme also failed at the same time I began having problems with the old laptop. Suspecting the hardware was the problem after checking with my ISP, I purchased a new Airport Express at Best Buy. Using it, I got my WIFI network back up and running. That's why I figured there was a problem with the older Airport Extreme. The Airport Extreme was replaced by an Apple Genius at the store, when I purchased the new laptop. Putting my Home WIFI network back together with the new AE, went fine, but it turned up another problem. I use an older (pre-N speed) Airport Express to link a YAMAHA digital piano wirelessly to my WIFI. It can go online directly and download music. I can also push my iTunes wirelessly through the piano's amplifier and speakers for great sounding stereo. The problem is my new AE won't recognize my older Airport Express. I tryied downloading the Airport Utility v. 5.6 as suggested online, but It still won't find the Airport Express hooked up to the piano.
Is there any way to update my earlier Airport Express and also an older Airport Extreme (round)? The Airport Utility v.5.6 won't recognize them and initialize them. Any ideas? I repurposed the new Airport Express I bought to seerve my printer, allowing me to disconnect the USB cable from my iMac. That's working fine, except my HP OfficeJet Pro 8500 now won't give me two sided printing anymore. It always something!
Network consists of:
20" Mid 2007 iMac running Mac OS Lion 10.7.4
New 15" MacBook Pro running Mac OS Lion 10.7.4
HP Officejet Pro 8500 All-in-one Printer
New Airport Extreme attached to DSL Modem
New Airport Express wirelessly attaching my Printer to the network
Old Airport Express (A/B/G) connecting my Yamaha Digital piano (NOT WORKING)
Old Airport Extreme (round) (NOT WORKING)

Bob,
Thanks for your help. At this point, I'm seriously considering replacing the older "g" AX with a new "n" model. For whatever reason, each time I've tried to bring the ols AX bcak online in my network, it only managed to screw up my network. Using the Airport Utility 5.6 for Lion, I was able to get a green light on the AX, but it still would not go online from my Yamaha digital piano control panel, like it always did before.
Using AUtil 6.0, everything else works, and I'm assuming that setup with a new "n" speed AX, my piano will be able to get back onlune, too. When I originally set up the AX to link the piano to my WIFI network, I had very little trouble getting it setup. YAMAHA didn't list the Apple AX in it's list of compatible wireless routers/adapters, but I saw no reason that it wouldn't work. As I said it was a reasonably easy setup the first time, and it has worked for several years with no problems.
It's not the cost of buying the new AX that bugs me, it's the fact that I can't figure out why it won't work now when it did before. It was working fine with my old AE based WIFI network, even after upgrading the my computers to the Lion OS. I used to be reasonably savvy with Apple technology, having spent the last 15 years of my teaching career (1987-2001) as the tech liason for the schools where I worked, supporting first Apple II's, then Macs, and networked buildings. After eleven years of retirement, I find it harder and harder to keep up as the technology just keeps evolving. I'm trying, but it's not easy! Any and all help is appreciated!

My airport extreme will not connect to the Internet

My airport extreme will not connect to my toshiba router. I connected it to my office internet this morning but when I hooked it up at home it simply will not connect. I have tried resetting all the settings and have had no luck. It did work once upon a time. I currently have my airport express hooked up so I know there is connectivity.

I could never figure it out after trying everything I could and going to the genius bar I ended up just purchasing another extreme. The really funny thing is that I can set up a network between the two and it works fine. I am using it at work now with out any problems so I guess there is really no loss :-?

I enabled the guest network feature on my time capsule. Can I configure my airport extremes guest network feature if I use this as a network extender using a "roaming" network?

I enabled the guest network feature on my TC. Can I configure my airport extremes guest network feature if I use the extreme as a network extender connecting my Airport Extreme to my TC via ethernet cable?

Unfortunately no, since the AirPort Extreme should be configured in Bridge Mode if it is connecting to the Time Capsule using an Ethernet connection.
The Guest Network option cannot be enabled when the AirPort is configured in Bridge Mode.
Another way of saying the same thing is that the Guest Network cannot be "extended" either by using an Ethernet connection or wireless. It is only available from the Time Capsule "main" wireless router on your network, not any extending devices.

Can't turn off airport

After installing snow leopard on my MacBook 13" I can't turn off airport from the top menu or from network utility.
Just now was successful in turning off Airport. I had to go to network preferences, click on automatic (not my regular network name), the apply button was no longer grayed out. Hit apply and was able to turn off the connection from preferences. Can now turn off and on from top menu

ok I just installed SNM LPD on 3 intel macs-older Imac 2.0ghz, newer 13"macbook 2.4ghz, and newer 24"Imac 2.4ghz. All of them worked ok except the Imac. I couldn't connect to a wireless network at all nor could I turn off the airport card. The system profiler saw the card and it seemed to be working fine. So I knew it was a software problem. I tried everything. I was just about to wipe the disk and reinstall everything (which would have taken 3 to 4 days) when I tried to add another network location profile. I've used the automatic profile forever, but then I thought I'd try a whole new location. I went to edit locations. Hit the plus button and named it. It populated the hardware and my airpot card (which was on but wouldn't connect) turned off. When I turn it back on (in the NEW location menu) it found all the nearest networks instantly. I found my home network and put in my password and it didn't give me the small "connection error" sign. I don't know what this glitch is but its annoying...hope its helps!

Connects to Airport extreme but not to internet

Whenever I close my laptop and reopen, I lose internet connection thru the airport extreme and I won't get it back. It seems that I will have connection to the Airport Extreme, but not the internet.
Sometimes what fixes it is turning the airport off and then on again (sometimes multiple times). Usually restarting the computer fixes it (but not always).
What happens is this (viewing Sysprefs/network/airport/network status and "internet connect"): the internet connect will report connecting...then will announce "connected", but show no "time elapsed" at the same time the Net status will read "airport is connected to ..network...with it's own IP address and may or may not be connected to the internet" And I won't be.
Then, when it starts working again (after the abovementioned turning off/on) it will start counting time elapsed, then in Net Status it will say "airport connected to ..network. you are connected to the internet via airport."
Also, whenever I use "internet connect" to turn the airport off, when I turn it back on again I will not have internet access, just the messages I list above. The "strenth meter" will say my signal is good (which it should be) and it says I am connected but doesn't show "elapsed time" nor will I have actual internet access.
Again, restarting the computer will usually work (less often, logging out then back in).
Another strange symptom-- When I hit the "disconnect" button under the airport section of "internet connect" it disconnects, then reconnects immediately. When I hit the disconnect button w/ in the Sysprefs/network/airport...etc, it does nothing but bring to the front window the "internet connect" window. So the only way to "disconnect" is to turn off the airport (which results in the above problem).
Side note--I am in the habit of turning off the airport (not the base, but from the computer) when I don't plan on using it for security-- am I being excessively paranoid? I do have my firewall in operation. Should I just leave it (being the airport) on all the time (in your humble opinion?
Sorry if this makes no sense or rambles, it is now 5:30 am and She Who Must Be Obeyed will be getting up in about an hour wanting to know if I fixed the computer yet. I'm tired.
Thank you in advance.
17" powerbook 1.5 PPc G4 Mac OS X (10.3.9)
17" powerbook 1.5 PPc G4 Mac OS X (10.3.9)

Try the following:
Delete Preferred Network(s)
- System Preferences > Network > AirPort > Configure
- In the "By default, join:" pull-down menu, select "Preferred networks"
- Delete the network(s) you regularly use from the list
Delete AirPort Keychain Entries
- Launch the "Keychain Access" application located in Applications/Utilties.
- Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
- Restart, or log out then back in.
Add Preferred Network(s)
- System Preferences > Network > AirPort > Configure
- In the "By default, join:" pull-down menu, select "Preferred networks"
- Add the preferred network(s) using the "+" button.
- Restart or log out then back in.

Can I turn my airport extreme when not in use?

Similar Messages

Maybe you are looking for