Can i turn off integrated video adapter and use only discret video card?

pavilion g6 2284sr. I have not menu in BIOS to do this. I have not menu in Catalyst control center to activate discret card for all processes. i have not any rules for do anything with this problem. Pls can you give me bios programm version that wiil give me rules. I don't know is my discret card all right. Please do not describe me how i must to assign programms for each graphic adapter.
And where i can read information about all components of hardware for this notebook.

For each clip you can go to the audio portion of inspector and uncheck/disable the tracks you don't desire. That would take longer than Tom's method, but I think the audio won't show up as a blank later on.

Similar Messages

  • I can´t turn off my ipod touch and the camera doesn´t work

    I can´t turn off my ipod touch and the camera doesn´t work..How can i turn it off if any button works?

    That symptom is covered here:
    iPod touch: Hardware troubleshooting

  • I play music from my iPhone via Bluetooth on the car radio. The phone also connects over the radio. Can I turn off Bluetooth for phone and leave it on for music?

    I play music from my iPhone via Bluetooth on the car radio. The phone also connects over the radio. Can I turn off Bluetooth for phone and leave it on for music?

    I haven't tried it yet, but I believe this would disconnect Bluetooth for both the phone and music. I have a 2013 Hyundai Sonata if this will help.

  • Can you turn off the charging feature when using accessories?

    Can you turn off the charging feature when using accessories with the iPad?

    You cannot overcharge the battery when using the power adapter. Once the battery is fully charged, the iPad will no longer continue to charge if it is still connected. I leave my iPad on the power adapter for hours on end - on weekends when I am not at work.
    iPad - Charging the Battry
    http://support.apple.com/kb/HT4060
    About the iPad Battery
    http://www.apple.com/batteries/ipad.html
    These are both worthwhile reading for concerns about the battery and how to properly maintain it.
    I know nothing about external speakers with the iPad since I do not use them - but If the speaker is with a dock of some sort that charges the iPad - you should have no worries. If it is a dock that charges the iPad - I know of no way to turn off the charging feature, but it will not shorten the life of the battery anyway as long as the battery is properly maintained and cared for.
    Message was edited by: Demo

  • Can I turn off snapping to vertical and horizontal?

    i need to make a line that's not quite horizontal, but when it try to use the ruler to make it, it always snaps to horizontal. This should be a feature that can be disabled, is it possible?

    Unfortunately, the snapping behavior is not something that can be turned off in the current release. We have heard this feature request once or twice before, but I can't say when having an option to turn off snapping will make it into a future release.
    Frank
    Draw Engineering

  • HT204019 Can I turn off the ringtone for one contact only?

    Is it possible to turn off the ringtone for one contact only? The block feature won't work because I still want to be able to receive voice messages from this particular contact.

    You can assign a silent ringtone to that one person. Google to find such a ringtone, sync it to the phone, assign the custom ringtone to this person and when they call, the phone will appear not to ring.

  • Can I turn off iTunes match on one computer only?

    I have iTunes installed on two laptops, one at home and one at school (I'm a teacher). iTunes match has worked great for my home computer and iPad, BUT...I do not want my music on the school laptop. Is there a way to turn off iTunes match on one machine only? I thought I had turned it off, but when I went to add some audio books for school it said it was adding them to iTunes match and now the books show up on all my devices.
    To be clear, I want to keep iTunes match for my personal laptop and iPad, but would like to turn it off on the school laptop.

    Hi,
    Yes. To turn off match Go to menu > store > and select turn off itunes match.
    To turn it back on you need to turn on from same point but you will be asked to sign in and add this computer.
    Jim

  • I am using an alternate monitor. Can I turn off the laptop monitor and still operate normally?

    I am using an alternate monitor with my MacBook Pro. Is there a way to disable the laptop monitor so that the laptop can be closed?

    Here is how it works, if you wnat to use it:
    Apple Portables: How to use your computer in closed clamshell (display closed) mode with an external display
    My son put his big monitor up on 4 inch blocks, then opened the MacBook on the desk below. Once he turned off Mirroring, he used the laptop display as an extension of the big display, and left the MacBook open.

  • How can I turn off Mail's Compose and Reply animations in fullscreen?

    Does anyone know how to turn off the animated opening of a "compose new mail" window when in fullscreen mode?
    I'm using Mail 6.5 under Mountain Lion.  When I'm in fullscreen mode and I either compose a new email, or reply to an email, the new mail window springs up from the bottom of the screen in an animated way.  I would prefer it to just appear.
    I was able to disable this animation when not in fullscreen mode by typing from a Terminal prompt:
    defaults write com.apple.mail DisableReplyAnimations -bool TRUE
    However, I cannot find a way to disable it while I'm in fullscreen mode.
    Any help would be much appreciated.
    Thanks.

    The only gesture that is stand is the two finger tap the goes to mission control.  You can turn that off in System Preferences > mouse.
    Also check the second column in System Preferences > Mission control > Show Desktop:
    Set to "-" as a secondary click here could cause the issue.

  • How can I turn off  messge "Show Preview" and "Repeat Alert" on iPhone 3G?

    How do I turn off the messge "Show Preview" and "Repeat Alert" on iPhone 3G? I switched them both to Off, turned phone off/on, but the envelope icon and the message alert still pop up as soon as a message arrives. I need the privacy of not having the person sitting next to me seeing that I just got a message from "Bob."

    Well, the iPhone will always alert you when you receive a text message. If you don't want the phone to show "Bob's name" then put "None of your business" in the name for all your contacts so that when you get a text, the person sitting next to you and staring at your screen will see "None of your business" instead of the real name of the sender. Other than teaching the people around you to be polite and not read your phone screen unless invited to do so by you, there is little else you can do.
    Message was edited by: GeekBoy.from.Illinois

  • Can i turn off my cell data and just use WiFi?

    I Will be traveling to Europe and would like to use wifi only for data messaging is it possible to turn off cell data and not use the iphone as a phone but just use wifi?

    williamfromgoleta wrote:
    I Will be traveling to Europe and would like to use wifi only for data messaging is it possible to turn off cell data and not use the iphone as a phone but just use wifi?
    Yes, you can turn off cellular data. You will not be able to use Visual Voicemail or get MMS messages, however.

  • How can i turn off Find My iPad without using the iPad?

    My swipe screen has stopped working completely on my iPad. Very disappointing as it is only 18 months old and has been well looked after! I have tried holding down the off/on button and menu button to reboot but this doesn't work. I have now logged the fault with Apple and have an appointment to see someone in the support team this Monday. However, I wanted to try one more thing. I want to restore to factory settings as I've read that this could resolve the problem. When I plug it in to iTunes and try to restore iPad i get a warning message telling me I need to go to iCloud settings on my iPad and turn off Find My iPad before restoring. As I cannot use the iPad I cant do it from there. Is there another way? Please help me, I want to weep!

    FORCE IPAD INTO RECOVERY MODE (this will disable Find My iPhone)
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • How can I shut off built in camera and use another one?

    I'm trying to use one of Apple's older auxillary cameras to shoot auditions.People will sit on the other side of my computer.
    I plug it into my Imac, but the system doesn't recognize it and I continue to see only
    myself. How can I turn the other camera on?

    harryfromrichardson wrote:
    ...the system doesn't recognize it ...
    How can I turn the other camera on?
    With the external (Firewire) iSight connected, (do not chain external iSight with other Firewire devices) if your  > System Profiler > Hardware > Firewire does not recognize the external iSight, use the suggestions here to test whether your old iSight is still functional:
    http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
    Once your system recognizes both cameras, be sure to rotate the ring at the front lens cover of the external iSight clockwise to turn it on and open the lens shutter.
    With more than one working camera recognized by your system, most camera-capable applications have settings that allow you to choose which camera to use. However, they do not all work the same way.  For example:
    • iMovie 9 ('11) uses a choices bar in the "Import from Camera" window:
    More info: http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
    • For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
    • Photo Booth uses the Photo Booth > Camera menu command to select which camera to use.  Remember, camera choice for any app will be available only if more than one working camera is recognized by your system.  With only one camera, the choices will not be visible.
    • For FaceTime,if your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
    If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
    • QuickTimeX uses Preferences to select between connected cameras.
    QTX video Preference settings are visible only when you have a new video recording window open. The image below shows how to access QTX video Preferences from an open video recording window:
    Note that only one webcam (iSight) is shown in this image because I had only one camera connected to my Mac at the time. When more than one compatible camera is connected, you will see the additional camera name and can select it in this menu.
    •  For cameras connected via Flash browser plugins, control-click on an open video window and adjust the camera settings to select between a connected USB and Firewire video camera:
    http://www.macromedia.com/support/documentation/en/flashplayer/help/help04.html
    • For other apps, check the app's menu items or Help to find out how to select between connected cameras.

  • HT5019 Can I turn off my macbook Pro when using a Thunderbolt external display?

    I have attached a Thunderbolt disply to my MacbookPro when not traveling. Is there a way to turno off the Macbook screen and only have the Thunderbolt running?
    Thanks!

    This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

  • How can I turn off Event ID 5156 AND 5145 in the Security Event Log?

    Hi,
    I have a high volume web service.   Everytime there is a connection from the outside, it logs this in my security event log.
    I want to turn this off.
    How can I stop the logging of event id 5156 on the web server and 5145 on the file server?
    Thanks!
    Dane!

    Hi,
    Thanks for posting in Microsoft TechNet forums.
    The problem can be related to Audit settings. Please check the following threads to see if the information can be useful during the troubleshooting:
    auditing file share on windows 2008 R2
    http://social.technet.microsoft.com/Forums/en-US/winserversecurity/thread/9e633bad-cda6-4ec4-8f04-c01de57ce767
    Event ID 5156 filling up event logs. Probably due to anti-virus software (SEP 11)
    http://social.technet.microsoft.com/Forums/en-US/w7itprosecurity/thread/8044fb62-f5ea-45b5-b717-3f6592af77e0
    Regards
    Kevin
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback
    on our support quality, please send your feedback here.

Maybe you are looking for

  • Adobe AIR Application certificate issue - Urgent

    Hello, I have created my AIR application in flex 3 using AIR 1.0. I have created it with local air certificate and dispatch the air application to the client. Now after 2-3 months i have got some new features to be added into that application for sam

  • Any more info on Retina display optimized Photoshop?

    Just checking back every couple of weeks (or months) to see if there is any more information regarding any availability of Photoshop CS6 optimized for Retina display capabilities? I know that it was probably a rush job getting it ready for the Apple

  • My ipad mini is bouncing between the lock screen and the apple logo.

    I am having a hard time turning it off.  It will not reset. and the temperature is warm.  What is wrong?

  • Upload Failed error while uploading Role

    Hello Everyone, I am uploading a role using the following data in the Identity management Import file. I have also checked the "Override Existing data" file checkbox. [Role] rid=pcd:portal_content/uk.bc.BGSM_BUSINESS_CONTINUITY/uk.bc.BGSM_CSA rdesc=B

  • Schedule recovery of file folder Powershell from DPM

    I can recover through the DPOM console this data attempting to create a PowerShell script to do the same thing. Here is script : $from = (Get-Date).adddays(-36500) –f "dd-MMMM-yyyy 00:01:00" $to = Get-Date –f "dd-MMMM-yyyy HH:mm:ss" $pg = Get-DPMProt