Can I turn off the keypad completely?

Is there a way to turn off the keypad completely? Mine is fried, thanks to a coffee spill, but I can still use an external one. I want to shut the original off because some of the sticky keys cause problems, like the volume gets stuck on mute, etc. Any help would be greatly appreicated.

This may not help at all, but is worth a try ... it shouldn't erase any of your data. A system cache clear isn't as drastic as a factory reset, but it sometimes clears up glitches. How to do a system cache clear:
Power down phone
Hold volume up/down & power simultaneously
Use volume down to navigate to 'Recovery', use volume up to select
Should see screen with triangle and exclamation point next to an Android
Press volume up/down simultaneously
Use volume rocker to navigate to 'wipe cache' and use power button to select
Once finished, use volume rocker to navigate to 'reboot system now' and use power button to select

Similar Messages

My Apple TV voice talks so fast. How can I turn off the voice completely?, My Apple TV voice talks so fast. How can I turn off the voice completely?

The voice sounds like she's on speed! It's maddening. How can I turn off the voice? I can't find the option anywhere.

settings > general > accessibility > voice over

After I connect with my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.

After I connect my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.
switching off wifi and on again or going into airplane mode did't help!
This problem happens only with ad-hoc wifi networks not with normal ones.
(Ad-Hoc network was created on XP Computer)

Welcome to Apple Discussions
Sorry, but the 169.x.x.x IP address is internally generated by the iPod (and iPhone) and indicates that a network has been detected but no IP address has been issued. Your friends iPhone was not connected to your ad hoc network either - it connected to the internet through the 3G network.
You should read through the Vista help screens on ad hoc networking for some insight how this works. You should be able to get some ideas there.
In the mean time, $40 or less will buy you a very capable wireless router with four Ethernet ports and will simplify your network tremendously. Having used Windows ICS for a long time, the addition of a router and a real network simplified things so much.

How can I turn off the feature that auto completes sentences in tables?

I am currently typing information into a table in Pages. I would like to turn off the auto complete feature which predicts the wording of the sentences that I am entering. How do I do this?
Thanks,
Gary
Nibber 1

I think you will find a solution suggested here.

E72 - How can i turn off the keyboard lock functio...

How can I turn off the keyboard lock function? If I don't want it to auto lock after 5 mins but stay active, can I turn the auto lock off completely? I've checked Control Panel - Settings - General - Security - Phone and SIM Card and there appears to the the option, but when you try and select 'off' it doesn't allow you to turn it off.... Help?
Solved!
Go to Solution.

"it is there my frend., go to Menu - Control Panel - Settings - General - Security - Phone and Sim Card
then scroll down and select keypad auto lock period"
Got it from...
/t5/Eseries-and-Communicators/E72-shortcut-key-keypad-lock/m-p/572418 bout halfway down. I know I had a google need to find this answer.
Samsung Galaxy S4 'Black' (current)
My N9 Black (backup phone)
My N8 Green runnin Xeon^4 3.2.1
My E72 White
My E63 BLUE
http://www.youtube.com/Jeahavee
http://www.reverbnation.com/jeahavee
Stop with the popup notes Nokia sheesh I don't need help from you :/
I run Windows 7 Home Premium 64bit/Black Opal on my HP Dv6 1030us (DiViUs)
Windows 7 64 bit Pro and Black Opal on my custom desktop (Giniro)

HT1657 How can I turn off the scrolling movie ads in itunes store?

How can I turn off the scrolling movie ads across the top of the screen when I open the itunes store and am in the movies section?

Thanks varjak paw.
I was afraid this was the case. To the degree that Apple marches down this well-travelled road towards making money by trying to pound customers into submission with flashing ads, etc. that actually serve only to aggravate and drive away at least people like me (28 year user of macs) from both Apple and whatever is being advertised, and indeed get in the way of my being able to efficiently do what is my part of what I always thought was the core of the synergism between Apple and its customers -- them innovating to provide the best tools to help us to be creative and productive, then the company will find itself sharing that space with myriad other companies so bankrupt for ideas and innovation that they have no other possible strategy that to promote mindless consumerism. That does not seem a place of strength for Apple and a complete forfeiting of its unique position. Sad to watch.

How can I turn off the home screen preview of SMS/text messages on 3GS

How can I turn off the home screen preview of SMS/text messages on my new Iphone 3GS ?

Go to Settings>Messages and choose "No" under "Show Preview" which will hide the text part of the SMS/text message but still will pop up on who its from and just says "text message" on it.
Other than this there is not a complete way to disable the notification.

How can I turn off the autocomplete/autofill function in Mail?

How can I turn off the autocomplete / autofill function in Mail (Mail 7.2)? I know how to remove email addresses from the 'Previous recipient' list, but I simply want to deactivate the autocomplete function for email addresses entirely.
You used to be able to do this via Mail - Preferences - Composing, but I upgraded to Mavericks today, and the option to deactivate the autocomplete funtion for email addresses is no longer there.
Does anyone know where to find it?
Thanks in advance for your feedback,
Tine

Zloyprep wrote:
Somehow Escape button started bringing me an autocomplete list in Keynote which is monstrously inconvenient.
This is rather surprising.
What you are describing is a feature called "word completion", provided by the Cocoa text engine, and hence used by apps which rely on it, including iWork, TextEdit, and others. When you are typing, or the insertion point is in a suitable position, pressing ⎋, or ⌥⎋, or F5 brings up the word completion list. Of course, it only works if there are suitable words in the list. For instance, if you type "Schad", intending to write "Schadenfreude", you can press ⎋ as much as you wish and nothing will come up. But type "Zeit" and then ⎋, and you'll get "Zeitgeist" sure enough.
What is surprising is that you describe it as if you had just came across it, whereas it has been available for years (although I believe that originally it was activated only by ⌥⎋). iWork (including Keynote) is a little different, because, in addition to ⎋, ⌥⎋, and F5, word completion is also activated by ⌘⎋.
I don't know how to turn off this feature, if indeed it can be turned off.
Usually Escape would make me exit the text box
Is there any chance you mis-remember? The Keynote shortcut for exiting text editing and selecting the text box is ⌘↩ (command-return).

How can I turn off the FileVault?

How can I turn off the FileVault? It keeps saying 'Encryption paused', even I connected the power adapter.
What impacts does it have on my Macbook Pro if I cannot turn off the FileVault?
Thank you!

If you don't already have a current backup of all data, back up before proceeding. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
Then, from the menu bar, select
File ▹ Turn Off Encryption
Enter the password again.
You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
Mac OS Extended (Journaled)
from the Format menu.
You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe.

How can I turn off the Download pop up Window from displaying when downloading a file?

How can I turn off the Download pop up Window from displaying when downloading a file?

To not display the built-in Firefox downloads window, Tools > Options > General tab, un-check "Show the Downloads window when downloading a file". See: http://support.mozilla.com/en-US/kb/Options+window+-+General+panel
If you have some other download manager installed, you will need to see the documentation for the download manager.
 
You have installed plugins with known security issues that should be updated. To see the plugins submitted as part of your question post, click "More system details..." to the right of you original question.
*Shockwave Flash 10.1 r53
*Next Generation Java Plug-in 1.6.0_18 for Mozilla browsers
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from one of the links below; '''the links take you directly to the download and you avoid the "getplus" download manager and "extras" (i.e., toolbars, virus scan links, etc.) on the main Adobe page.'''
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download links and other information''':
#** https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#** '''or''' you can download, save, then run the manual installers for IE, then for Firefox (and all other browsers) from here: http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
#* After the installation, start Firefox and check your version again.

How can I turn off the WLS 6.1 security in order to develop my own application-based security module?

Dear Colleagues,
I am currently developing a J2EE application using WLS 6.1.
My team and I have to implement a security requirement to suit our company's needs.
The security requirements are that, users' password need to be aged (30 days maximum) and we need to provided a GUI front-end (JSP) to allow users to change their password when these expire after 30 days.
Our internal contacts in the company, have already taken the lead to find out about whether we will be able to use the WLS 6.1 platform to do this and the answer we got back, was.
Now we need to develop our own security module.
I have 2 questions:
1. How can we turn off the WLS security in order develop our own application-based security module?
2. How can we develop a security module that allows us to age users' password and provide them with facilities to change their passwords when these expire?
At the moment, we are using the default BEA WebLogic login.jsp page and there some configuration in the web.xml for this. I will be grateful if you could advise me on how to turn this default security off so that we can write our own security module.

hi,
1.You can write your own realm in 61 which can plugged for your security
calls.
2. once you write your ownrealm.. you can access it through weblogic
api/ur api..
thanks
kiran
"Richard Koudry" <[email protected]> wrote in message
news:3dd0d081$[email protected]..
Dear Colleagues,
I am currently developing a J2EE application using WLS 6.1.
My team and I have to implement a security requirement to suit ourcompany's needs.
>
The security requirements are that, users' password need to be aged (30days maximum) and we need to provided a GUI front-end (JSP) to allow users
to change their password when these expire after 30 days.
>
Our internal contacts in the company, have already taken the lead to findout about whether we will be able to use the WLS 6.1 platform to do this and
the answer we got back, was.
>
Now we need to develop our own security module.
I have 2 questions:
1. How can we turn off the WLS security in order develop our ownapplication-based security module?
>
2. How can we develop a security module that allows us to age users'password and provide them with facilities to change their passwords when
these expire?
>
At the moment, we are using the default BEA WebLogic login.jsp page andthere some configuration in the web.xml for this. I will be grateful if you
could advise me on how to turn this default security off so that we can
write our own security module.

I have an iPod touch and I can't turn off the portrait orientation lock. Can anyone help?

I have an iPod touch and I can't turn off the portrait orientation lock. Can anyone help?

What happenw when you try to turn it off?
iOS: Screen does not rotate
Not all app have a landscape mode.

How can I turn off the yellow pop-up tool tips?

Howdy,
I have searched high and low in the preferences and found nothing that does the trick. How can I turn off the yellow pop-up tool tips?
See attached screen shot. They are incredibly annoying. It's probably obvious, but I cannot find it anywhere on internets or this forum.
Thanks!

Thanks Nancy. Unfortunately that doesn't do it. I turned those off awhile back. Nor can I find anything under VIEW that seems to make a difference. Just FYI: I'm on a Mac OS w/Dreamweaver CS6 - but this has happened on previous versions of DW. Thanks again.

How can I turn off the sound from the original midi or audio tracks when I turned on the duplicate tracks for editing ?

How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

Dan,
It sounds like one of your preferences has changed.
Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
Hope that helps

I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset?

I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset/earphones?

Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.

Can I turn off the keypad completely?

Similar Messages

Maybe you are looking for