Can i unplug time capsule from the ethernet cable and still use it??

can i unplug time capsule from the ethernet cable and still use it??

I have tried to extend that wireless line but as soon as i remove the LAN cable i have no internet connection anymore. So basically, does the TC get the signal wireless from the router??
The Time Capsule can wirelessly extend a wireless signal....but only if it is being provided by another Apple AirPort wireless router.
If the "main" rotuer there is not an Apple AirPort router,  you will need to connect to the network using a wired Ethernet connection.

Similar Messages

  • How do I use my time capsule as a wifi extender and still use as a backup in Time Machine

    I purchased a new airport extreme and want to use my existing time capsule as a wifi extender in another part of the house.  How do I set this up so that I can still use the time capsule as my backup (time machine) hard drive?

    Hello BNOLTNER,
    Thanks for using Apple Support Communities.
    Please see the directions in the following article for configuring your extended network.  Your Time Capsule will still be seen on the network, and may still be used as a backup destination.
    Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n)
    http://support.apple.com/kb/HT4259
    Take care,
    Alex H.

  • Can I move my folder from the C drive and still have ITunes work??

    I use ITunes and its playback library program ( version 9.1)., and I have a quick question that I need answered.
    My MP3's are located on another partition of my Hard drives ( F drive), and these mp3's are then allowed to play back(copied to) and be sorted etc etc on my ITunes program which is located on my C: Drive.
    I did some sorting and relocating (within the ITunes application 'juke box' itself) this morning and have now discovered my C drive is under 4GB in size now., and my F drive still has well over 80 GB available. Can I transfer over my C:\Documents and settings\my name\My Documents\My Music\ITunes\Tunes music\xxxxxxxx.mp3 to the F drive? or does it only work in corresponding with my ITUnes program itself on C drive??

    Click here and follow the instructions.
    (47765)

  • Can you access Time Capsule From any where, or do you have to be on the same network

    Can you access Time Capsule From any where, or do you have to be on the same network

    check out the post by Tesserax in this discussion.

  • Can you access time capsule from a mac over the internet

    Can you access time capsule from a mac over the internet?

    Yes. See this thread about how to access the disk attached to a Time Capsule.  Access to the Time Capsule itself can be done similarly.

  • Can I access the data on the time capsule from the Internet?

    Can I access the data on the time capsule from the Internet?

    You need to follow the BTMM via icloud instructions.
    http://www.apple.com/support/icloud/back-to-my-mac/
    There are plenty of other ways to do it.. but issues to do with Apple not using a dynamic DNS client so if your ISP does not allocate you a static public IP there is no way to find it, if the public ip rotates as they are designed to do hourly or daily.
    Do a google search, remote access time capsule..
    Or use the more like this on the right hand side... there are plenty of posts and even youtube video which go right through it.
    BTW your school system may simply block the port.. if I was a school IT admin.. I would. You are dragging files across to the internal school network bypassing the firewall.. that is unacceptable risk to the whole school system.

  • I can access my time capsule from my mac mini at work but my macbook can only access it from my home network. how do i fix this?

    I have a Mac Mini and a MacBook, both were configured at home to access the time capsule. I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home. The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
    Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow. Accessing the same files from an older HP laptop is as fast as accessing its own hard drive. How can I speed up the accessing of these files from my apple products. One would think they would work fast and the 'windows' computers would take minutes to map the drive each time... 
    Thanks for any help.

    I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home.
    This cannot happen by magic though.. you must have configured the mini to access the TC remotely.. which method are you using, BTMM and iCloud??
    The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
    How is the Macbook configured to access the TC remotely?? If you are trying to use BTMM and iCloud, then it might be a case that with the mini running the connection cannot be done by more than one computer at a time.. this is generally the case although I do not know if that is specifically true of BTMM method. Try turning off the mini and leave it off.. (off not standby)... then reboot the TC when you are at home.. and then try and connect the laptop to the TC the next morning from work. See if it is then able to capture the connection.. if so start up the mini and I suspect it now will not be able to connect.. that will prove that the TC cannot cope with two remote connections.
    There also could be another factor in here. If you are accessing the laptop via the same router as the mini is on.. then actually you cannot have two users mount the same files on a TC.. from the same IP address.. as far as the TC is concerned both devices have identical IP, that is the public IP of the work location router.
    If you happen to not be using BTMM then the situation is even easier.. you cannot make two different devices connect to the same network resource using the same port. That is the failing of the NAT system.. one device uses the port then it cannot be used by a second device. You will need to do some fancy footwork and use a different port.
    Anyhow tell us exactly how you are doing remote access.. otherwise I am just guessing.
    Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow.
    Are you talking about files you are hosting on the TC?? Not Time Machine backups??
    Can you tell me exactly how you are accessing the TC.. please do a test..
    Copy a file to the TC and from the TC using the Laptop.. Use a single very large file, eg 1GB movie file.
    Give me a read and write speed.. you can use activity monitor to give me an aprox average speed as well as peak.
    Do the same test from the same computer with wireless turned off running ethernet.
    Then do the tests from the mini.. same ones.. copy large file to and from the TC by ethernet and by wireless.. when using ethernet make sure wireless is off.
    I strongly recommend you set IPv6 to link local only for your wireless and ethernet setup in the Mac.
    eg
    Now do the test from the HP laptop and give me the results from that.
    Is the issue wireless only.. ??
    Then you might need to spend a bit of time fixing the wireless in the Macs.. you can run wireless diagnostics in Mavericks.
    About Wireless Diagnostics

  • I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. My question is I now wish to add a second Airport extreme but am considering a hard wire connecti

    I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.  Can my network operate properly to extend the network with both a wireless and wired extend functionallity?

    I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
    Excellent plan.
    Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
    Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
    This Apple support document will show you how to hookup and configure the second AirPort Extreme:
    http://support.apple.com/kb/HT4260

  • I CANNOT PRINT FROM MY IPHONE 4 TO MY BROTHER 8890DW PRINTER WHICH IS CONNECTED TO MY TIME CAPSULE/NETWORK VIA ETHERNET CABLE???

    Why can’t I print from my iPhone 4 to my brother 8890dw printer which is connected to my time capsule/network via ethernet cable???  My iPhone does not even locate my printer,even though I have no problem printing from my Mac to the same printer.

    Typing in all caps indicates shouting, is considered rude and is difficult to read.  Many simply do not read such posts.
    You would need an airprint enabled printer or an app that proides printing function.
    iOS: AirPrint 101

  • HT1175 I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

    I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

    A PC can have more issues connecting than a Mac.
    But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
    If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
    Important thing is to get access to the TC.
    The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
    http://support.apple.com/kb/DL1482

  • My 2 TB Time Capsule's memory is full because it will not automatically delete old files as it is supposed to, so it is giving me zero backup of my two computers now.  How can this be fixed so my Time Capsule deletes the old data and saves the new?

    My 2 TB Time Capsule’s memory is full because it will notautomatically delete old files as it is supposed to, so it is giving me zerobackup of my two computers now. How can this be fixed so my Time Capsule deletes the old data and savesthe new?
    Neither my local computer consultant nor I have been ableto change any of the settings in Time Machine to correct this problem.  Working with the choices in the TimeMachine, there does not appear that there is any way to change the frequency ofthe backups either, so, after a year has elapsed, the time capsule is full, andmy only choice appears to be to erase all the current data on the Time Capsuleand start over, something that I do not want to at all let alone repeat on anannual basis.  My questions are:
    What can be done to have my Time Capsule delete old filesas it is supposed to do, so it has memory available to allow my computers toback up? 
    Is this a software problem that can be fixed online or isdoes this require a mechanical fix of defective hardware?

    How much data is being backed-up from each Mac?  (see what's shown for Estimated size of full backup under the exclusions box in Time Machine Prefs > Options).
    Is there any other data on your Time Capsule, besides the backups?
    Most likely, there just isn't room.  Time Machine may be trying to do a very large (or full) backup of one or both Macs, and can't.  Since it won't ever delete the most recent backup, there has to be enough room for one full backup plus whatever it's trying to back up now, plus 20% (for workspace).
    Also see #C4 in Time Machine - Troubleshooting for more details.

  • My A'Extreme sometimes won't connect to my MacBook Pro even if I have a green light on the device . I can unplug the ethernet cable and reconnect and it will work fine. all diagnostics say there is nothing wrong. Any ideas ?

    My A'Extreme sometimes won't connect to my MacBook Pro even if I have a green light on the device . I can unplug the ethernet cable and reconnect and it will work fine. all diagnostics say there is nothing wrong. Any ideas ?

    This is more about your modem then anything. Sometimes you'll need to unplug and plug back in your modem. Consider it a glitch from the ISP or just the modem in general.
    when I need to turn something off then on I try the modem first. This when I'm not doing any ware and tare to the device.

  • Best way to access Time Capsule from the Internet?

    I wanted to see if anyone knew of a program or setting I can use in order to access Time Capsule from the internet? I know that probably I will not be able to at this point access it directly, even though it is connected to the internet through my modem, but I do have a Mac at home that is connected to Time Capsule. Isn't their a way that I could connect to the Mac, but not through Back to My Mac, that would show Time Capsule as connected to it, so that way I could access the files? Any ideas would be appreciated.

    It is possible to mount the TC as a network hard drive when outside your regular network.
    1) You will need to reconfigure your router to forward the ports used for AFP (by default 548) to the Time Capsule.
    2) Then when outside the network make sure Finder is active, press Apple+K to bring up the 'Connect To Server' dialog.
    3) Input the WAN IP address of the network to which the TC resides on.
    4) You will be asked for the password used to access TC.
    5) The TC should appear as a mounted drive.
    It is then possible to access files on the TC as well as do a TM backup. To make life easier you can drag the mounted TC into your dock for easier access in the future.
    However, it is obviously recommended to use a strong password to protect the TC (configurable using Airport Utility in the 'Disks/File Sharing' tab). You may also need to use a service like DynDNS if your network does not use a static IP address.
    But I am using my home networks' Time Capsule successfully from the office.

  • I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility?

    I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility? Most of the discussions involve an existing wireless network. I don't have one.

    Correct. That's the way to set up the AirPort Express. After connecting your AirPort Express to the router, open AirPort Utility (in /Applications/Utilities) and follow the steps

  • Can i acess Time capsule over the internet?

    Can i acess Time capsule over the internet?
    If i am away can i acess time capsule true the internet???

    Click here and follow the instructions. If the Time Capsule is acting as the router, skip the port forwarding instructions.
    (45412)

Maybe you are looking for

  • Adding Data Field to Sales Analysis Report

    Does anyone know how to add data fields to Sales Analysis Reports, either in PLD or CR?  On Sales Analysis by Customer, I need to add the total quantities for all items sold for the sales included in the report, excluding negative quantities. Thank y

  • Execute a procedure with a list of array in sql server 2008

    HI all, I have a procedure which has a list of values passed as an array . How can i execute my procedure with array list? how to implement this?Please help me. Thanks in advance Deepa

  • Filter Shared Calendar Items content based on user

    Hi I am very new to Exchange development and need to find a solution to this problem: My outlook users must be able to view the complete calendar item description only if their name is mentioned in it. Else only the first few lines. I have researched

  • Alerts vs Triggers in Oracle

    Hi All, I want to understand the exact difference between a database trigger and an Oracle Alert. Can any one throw some light on this? Thanks Rafi

  • Requesting certificate problem ( SRV 2008 R2 )

    Dears, I have problem with requesting the certificate on server 2008 R2 , I create some template and I enable supply on the request but I couldn't enter the credential and customize the cert information like we had on 2003 . and when I put the root h