Can i update flex 4.6 sdk to flash builder 4.5 for php ?

well
i already downloaded the 4.6SDK from http://www.adobe.com/cfusion/entitlement/index.cfm?e=flexsdk site but once i add the new sdk to flash builder and try to make a new project
i cannot switch to design mode at all , gives me and erro rmessage: The Design mode is disabled as the project uses incompatible version of the flex SDK.
What's the deal ?
have to wait till Q1  / 12 ?
Cheers
Lare

If you're using components specific to the Flex 4.6 release, then it would be a natural assumption that design view will not work.  If you're having this issue while using components that are not unique to Flex 4.6, then I don't have an answer.  On a good note, design view is completely useless anyway.  It's much faster to type than to drag stuff around with your mouse needlessly.

Similar Messages

  • Mobile development using Adobe Flex 4.5 SDK and Flash Builder 4.5 for Data Visualization

    Hi,
    I am currently looking at the feasibility of building Data Visualization chart/graph in Android mobile phones. I would like to enquire if the mentioned subject comes with the Data Visualization components as seen in the Tour De Flex.
    Cheers!

    If you're using components specific to the Flex 4.6 release, then it would be a natural assumption that design view will not work.  If you're having this issue while using components that are not unique to Flex 4.6, then I don't have an answer.  On a good note, design view is completely useless anyway.  It's much faster to type than to drag stuff around with your mouse needlessly.

  • Flex 4.5 SDK in Flash Builder 4.0

    I am attempting to use the Flex 4.5 SDK in Flash Builder 4.0, as my company does not yet have FB4.5.  Everything seems ok, however whenever I try to use the <s:ViewNavigatorApplication>  or the <s:View> Flash builder does not seem to recognize them, I am not getting any code hinting. I undersand the design view would not work, but as far as code view, FB should not know the differnece.  Does anyone know why they might not be showing up in FB 4.0. I can't seem to find anything on the net about it.

    Just tried this out on an IIS server with Flash player 10.3.181.14 - it worked.
    Are you using the release version of Flash Builder 4.5 with the release version of Flex SDK (not a prior SDK build)?
    The URL you mentioned gives me a 403 forbidden error.
    -Anirudh

  • Can I develop CF projects using Flash Builder 4.5 for PHP?

    I currently develop CF projects using Flash Builder 4.5.  I am considering purchasing Flash Builder 4.5 for PHP.  Will I still be able to work on my CF projects using FB for PHP?

    Because in the installation instructions for FB for PHP it says that you have to uninstall the current installation of FB which I have several CF projects that I use regularly.  I hate to uninstall if it turns out that I can't transport my current projects into FB for PHP. 
    Oh that sux!  It's just an Eclipse plug-in, and one can have installed multiple installs of Eclipse OK, so I wonder why they're said this?
    OK, because I give suck advice, I'll D/L it and install it on a spare machine and take a look.  FB usually has a CF perspective does it?  So what you need to know is whether FB for PHP still has the CF perspective?
    Or are you asking whether you can install CFB (or CFEclipse) as a plug-in to FB for PHP, like one can with FB?
    Sorry about the bad advice.
    Adam

  • How can I overlay AIR 3.5 SDK in Flash Builder 4.7?

    I'm trying to overlay the new Air 3.5 sdk in Flash Builder 4.7 but the option to use specifed sdk is unavailable in the project preferences. What is the solution here?

    Hi,
    Can you please let me know whether you have overlaid it on Win/Mac?
    When you have created the mobile project what does app.xml show? for example if you have 3.5 overlaid you should be able to see something like this in app.xml
    <application xmlns="http://ns.adobe.com/air/application/3.5">
    For overlaying AIR 3.5 SDK on Flex SDK 4.6 locally following the instructions mentioned in the below url and then create a Flex Mobile project using that SDK.
    Overlay help document link : http://helpx.adobe.com/x-productkb/multi/how-overlay-air-sdk-flex-sdk.html
    Let me know if you need more information.
    Thanks,
    Hari

  • Flash Builder 4.5 for PHP doesn't update changes

    Hi,
    I'm guessing this is a very noob issue so I appologise about that.
    As I said, i'm very new to flex and started using it very recently.
    This morning I woke up started to make changes in my application. saved them and run them in the browser BUT to my surprise no changes been made.
    I tried taking it a little bit further and delete half of the apllication and still when i'm saving and running I get the version of yesterday's application.
    I'm guessing that for some reason when I press the run button the browser load the application from cach somwhere.
    Do you have an idea what it can be?
    Thanks,
    Ravid

    btw, i'm using Firefox.

  • I can not reinstall flash builder 4.5 for php trial version?

    My trial version stopped working so i was told by a member of adobe staff to uninstall and reinstall it again and it would still continue my trial. I have 45 days left on my trial. But now when i go to reinstall it i get the erro 'you should eject the disk image'. Can anybody help me get my trial back?

    Trial mode expires prematurely
    http://helpx.adobe.com/x-productkb/global/trial-software-expired-early.html

  • Where can I download Flash Builder 4.6 for PHP Premium?

    I purchased FB 4.5 for PHP Premium and was told that I'm entitled to a free upgrade to FB 4.6 for PHP 4.6 Premium.
    The download was available in February but is no longer there... Any alternatives?

    I have moved this discussion to the Installing and activating Flash Builder forum as the users in this forum should be more familiar with the product availability for Flash Builder.  I did find a reference to a relevant discussion at http://forums.adobe.com/thread/930792.

  • I've installed bootcamp 4.0 on my iMac 27. Everything works superb, but for playing need for speed run or battlefield 3 I need catalyst driver 11.7 or higher. How can I update my graphics? Is there a possibility except waiting for a new bootcamp version?

    I've installed bootcamp 4.0 on my iMac 27. Everything works superb, but for playing need for speed run or battlefield 3 I need catalyst driver 11.7 or higher. How can I update my graphics? Is there a possibility except waiting for a new bootcamp version?

    But how do you install the drivers if Bootcamp is running interference?
    Bottom line, I'ev tried to install three different versions of updated ATI driver sover the last few momnths and on each and every occassion have ended up with the original Bootcamp driver. A number of current games are unplayable on a Mac running Bootcamp as a result.
    And if I can't run the software I want, then Bootcamp is as useless as boobs on a bull.

  • HT1766 i have iphone 3 how can i update this phone because there is no option i setting for update

    i have iphone 3 how can i update this phone because there is no option i setting for update

    You have to update using iTunes.
    <http://support.apple.com/kb/ht4623>
    The latest iOS for the iPhone 3 is iOS 4.2.1

  • Overlaying adobe air sdk in flash builder 4.6

    After overlaying adobe air sdk in flash builder 4.6 i am getting this error in my flex mobile project "Could not resolve <s:ViewNavigatorApplication> to a component implementation.". I have followed the steps mentioned on this link "http://rubberduckygames.com/how-to-overlay-abode-air-sdk-over-flex-sdk/". Can anyone please suggest me what i need to do in order to get this work.

    Finally Figure it out..
    geo = new Geolocation();
    geo.addEventListener(GeolocationEvent.UPDATE, onLocationUpdate);
    has to be executed before checking if it is muted.
    geo.addEventListener(GeolocationEvent.UPDATE, onLocationUpdate);
    Is what requests permissions from the phone to use the gps.
    Hope this saves someone alot of time.
    Tested With Flex 4.9.0 Air 3.8 Beta.

  • Using latest FileInfo SDK, latest Flash Builder, new project crashes in latest Bridge

    I've been trying to create a custom panel in Adobe Bridge.  I downloaded the XMP-FileInfo-SDK-CS6, loaded the jar file into Adobe Flash Builder 4.7 (latest version), created a new project with NO modifications, and published it to the correct Custom File Info Panels folder on Windows 7.  I then restarted Bridge, opened FileInfo in a photo, but when I navigated to the new panel that I just created, it fails to load correctly and hangs the entire application.  The only way to close the window is to restart Bridge.
    So just to be clear -- latest SDK, latest Flash Builder, latest Bridge version, new project, no modifcation, completely crashes Bridge.  The GenericPanel is about the only thing that works without problem, but it's a little too limited for what I want to do (no business logic). 
    Not very reassuring that this is going to work at all.  Has anyone else experienced this?  Is there any workaround, or update I can try instead?
    Thanks.

    Ok, finally got this working.  Many hidden gotchas. 
    1.  You have to make a Trust File for your custom panel.  This is actually in the SDK, around page 53, so my bad -- but the problem is that there is no feedback from the Adobe application if you don't have this.  The application just hangs.  It should produce an error message "can't find trust file, etc.".  This should not be that hard to implement.
    2.  The latest Flex SDK does not seem to work in Bridge CC or other similar applications.  You have to use Flex SDK 3.x, apparently, and this is NOT in the documentation.  Not only should you set the default SDK in Flex Builder to 3.x (I'm using 3.6) but you have to edit the build.properties file to make sure it's pointing to the correct folder, eg: C:/Program Files/Adobe/Adobe Flash Builder 4.7 (64 Bit)/sdks/3.6.0.  Fortunately Flash Builder 4.7 comes with 3.6 installed.  If you have an older version, it's likely to be completely different.
    More info in this thread: http://forums.adobe.com/thread/1114153.

  • Installing AIR3 SDK in Flash Builder 4.5.1 ?????

    Hi All,
    Can anyone help me, with installing AIR3 SDK - Flash Builder 4.5.1, logically, I need to overally the sdk, the way, we use to do with previous version of AIR SDK.
    But no luck
    Thanks,
    Ravi

    Hi Ravi,
    just installed AIR3 SDK at work. I try to recap the steps I did:
    1. Locate the "old" SDKs
    They are located in the Flash Builder directory, in my case this was c:\program files(x86)\adobe\flash builder 4.5\sdks
    2. Make a copy of the previous SDK
    Copy a previous SDK (I used SDK 4.5.1 for that) and rename the copied folder to AIR3SDK (or a different name if you like)
    3. Overwrite the copied (!) SDK with the AIR3 SDK
    Copy  all files from the AIR3 SDK into the copied folder. It should ask you  to overwrite files quite a couple of times. After this, you should have a  working AIR3 SDK installed.
    4. Set a name for the new SDK
    I had to to this with the Beta2 - go to the new SDK directory and edit flex-sdk-description.xml - change the <name> content from Flex 4.5.1 to AIR3 SDK.
    6. Add the new playerglobal.swc from Flash Player 11
    Download the current Flash Player 11 "playerglobal.swc" from http://labs.adobe.com/downloads/flashplayer11.html and put it into the correct folder. From the SDKs root folder this was: <sdkroot>/frameworks/libs/player/11.0/ (I had to create the 11.0 folder myself and then just put the file in there and rename it to plain "playerglobal.swc")
    7. Add the AIR3 SDK to Flash Builder
    Under "Project Settings - Flex Compiler" for a project, choose the new SDK as SDK to use for the project. If the SDK does not show up, go to "configure Flex SDKs", then "Add" and select the newly created folder. The new AIR3 SDK should now be included in the dropdown list as a compiler for that project.
    Don't forget to add -swf-version=13 as a compiler flag on the same screen.
    After doing all this, I was able to use the new features, compile my projects and well, work with it
    Edit: I almost forgot - you also have to set the namespace in your -app.xml to 3.0 like this:
    <application xmlns="http://ns.adobe.com/air/application/3.0">
    Best regards,
    Martin

  • Error using Acrobat portfolio SDK with Flash Builder

    Hi all
    I've been trying to customize a navigator portfolio for Adobe Acrobat X using Flash Builder 4.5. I was running this proyect as Navigator but I received the following Flash Player error:
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at acrobat.navhost.app::SingleNavApp/set productConfig()[C:\dev\A10_1R1_Sandbox\Acrobat\Viewer\AcroView\Portfolio\Flash\Libs\NavHo stUtil\src\acrobat\navhost\app\SingleNavApp.as:333]
    at com.adobe.app::AppPrefsBinding/productConfig()[C:\dev\A10_1R1_Sandbox\Acrobat\Viewer\Acro View\Portfolio\Flash\Libs\NavPreviewShared\src\com\adobe\app\AppPrefsBinding.as:93]
    at com.adobe.app::AppPrefsBinding/refresh()[C:\dev\A10_1R1_Sandbox\Acrobat\Viewer\AcroView\P ortfolio\Flash\Libs\NavPreviewShared\src\com\adobe\app\AppPrefsBinding.as:76]
    at Function/<anonymous>()[E:\dev\4.x\frameworks\projects\framework\src\mx\binding\utils\Bind ingUtils.as:180]
    at mx.binding.utils::ChangeWatcher/wrapHandler()[E:\dev\4.x\frameworks\projects\framework\sr c\mx\binding\utils\ChangeWatcher.as:557]
    at flash.events::EventDispatcher/dispatchEventFunction()
    I've installed Acrobat portfolio SDK into Flash Builder and I have followed the documentation of Building a Navigator from http://learning.adobe.com

    Ok, finally got this working.  Many hidden gotchas. 
    1.  You have to make a Trust File for your custom panel.  This is actually in the SDK, around page 53, so my bad -- but the problem is that there is no feedback from the Adobe application if you don't have this.  The application just hangs.  It should produce an error message "can't find trust file, etc.".  This should not be that hard to implement.
    2.  The latest Flex SDK does not seem to work in Bridge CC or other similar applications.  You have to use Flex SDK 3.x, apparently, and this is NOT in the documentation.  Not only should you set the default SDK in Flex Builder to 3.x (I'm using 3.6) but you have to edit the build.properties file to make sure it's pointing to the correct folder, eg: C:/Program Files/Adobe/Adobe Flash Builder 4.7 (64 Bit)/sdks/3.6.0.  Fortunately Flash Builder 4.7 comes with 3.6 installed.  If you have an older version, it's likely to be completely different.
    More info in this thread: http://forums.adobe.com/thread/1114153.

  • Flex4.5 SDK under Flash builder Burito doesnt dispatch Enter key event in Text Area anymore

    Flex 4.5 under Flash builder Burito doesnt dispatch 'Enter' key event in Text Area anymore, in prev version 4.1 it was working properly, this stopped working after migration to Burito + Flex SDK 4.5?
    What that suppose to be?

    Hi
    That's true that Flex4.5 SDK under Flash builder Burito doesn't listen Enter key in Text Area for KeyUp or KeyDown event.
    Here I found a work around you can use.
    Add an eventlistener to the component in actionscript and set the useCapture=true next to eventlistener function. Now you can listen enter key for KeyUp or KeyDown Event
    Hope this helps
    Rush-me

Maybe you are looking for