Can i update my thunderbolt driver without updating my opperating system
can i update my thunderbolt driver without updating my opperating system
Yo can do it on that computer if you do the following. When the instructions says restore from backup, the iPod iOS will also be updated.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
or
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Similar Messages
-
unfortunately I updated to iCloud drive without reading the consequences. Is there any way to un-update this....I still need to be compatible with ios7 and mavericks on my other devices, thanks!
Sorry, no. The only way to restore this note is to restore from a backup that contains it.
-
is there a way I can use my external hard drive without the files being transferred on to my computer? as like like my iTunes music being on my hard drive without them being copied onto my computers hard drive ? because i dont have that much memory and i wanted my external hard drive to be the source for my music files and not my computer.
Many users keep their iTunes libraries on external drives. You just have to remember to connect and power up the drive before launching iTunes.
iTunes for Mac: Moving your iTunes Media folder:
http://support.apple.com/kb/HT1449 -
Hi. My iMac hard drive is running Mavericks. I have an old version of Quark Xpress (3.32) which won't run in Mavericks. Can I partition my hard drive and run an older system on one partition, so I can access my Quark? Is that possible?
Hi ancelau,
QuarkXPress 3 is a Classic Mac OS application, so you need a version of OS X that still supports Classic. I believe 10.4 was the last one.
So if you have an iMac that boots with 10.4, then yes that is possible. I doubt though that newer Macs boot with OS X 10.4.
So why don't you upgrade QuarkXPress 3 to a newer version? I am not just asking that because I want you to spend money with us.
Typically using software that was released almost 20 years ago is just feasible when you keep an environment that was current at the time of release or a few years after, so an older Mac with a operating system present at that time. 20 years in IT is a lot.
So my opinion is that on a new Mac with a brand new operating system you need to use something a bit more current.
How about QuarkXPress 9 (released 3 years ago) or QuarkXPress 10? You are better off with v9, as QuarkXPress 10 only opens v7 and higher (whereas QuarkXPress 9 opens v3.1 and higher).
Or - I am even happy to make an exception - upgrade to 9 and we give you 10 for free? Let me know please.
Thanks
Matthias -
Can possible write as a insert without update
Hi,
I'm inserting values of first 5 coulmns like below
INSERT INTO SS_ITEM_STAT_OPN(
REP_ID, ITEM_ID, REPORT_COLUMN_DISPLAY, REPORT_COLUMN_SEQ_NO, BEGIN_VALUE, END_VALUE)
SELECT
LN_SEQ_REP_ID, ITEM_ID, REPORT_COLUMN_DISPLAY, REPORT_COLUMN_SEQ_NO, BEGIN_VALUE, END_VALUE
FROM VW_SCALE_SCORE_CONFIG CROSS JOIN REP_ITEM_STAT_OPN
WHERE REP_ID = LN_SEQ_REP_ID;and i'm updating next 3 columns based on below statement.Can i write insert statement without update.
FOR LN_SSI_OPN IN NVL(TV_SS_ITEM_STAT_OPN.FIRST,1)..NVL(TV_SS_ITEM_STAT_OPN.LAST,0)
LOOP
UPDATE SS_ITEM_STAT_OPN SET
(TOT_STUD_ITEM_SS,TOT_STUD_CORR_ANS_ITEM_SS ) = (SELECT COUNT(*) TOT_STUD_ITEM_SS ,
Count(Case When RESPONSE_IS_CORRECT = 1 Then 1 End) As TOT_STUD_CORR_ANS_ITEM_SS
FROM PSYCHOMETRIC_ITEM_STAT_OPN A, VW_SCALE_SCORE_CONFIG B
WHERE SS_ITEM_STAT_OPN.ITEM_ID=TV_SS_ITEM_STAT_OPN(LN_SSI_OPN).ITEM_ID
AND (SS_ITEM_STAT_OPN.BEGIN_VALUE=TV_SS_ITEM_STAT_OPN(LN_SSI_OPN).BEGIN_VALUE
AND SS_ITEM_STAT_OPN.END_VALUE=TV_SS_ITEM_STAT_OPN(LN_SSI_OPN).END_VALUE)
AND SS_ITEM_STAT_OPN.ITEM_ID = A.ITEM_ID
AND SS_ITEM_STAT_OPN.END_VALUE = B.END_VALUE
AND ROUND(A.SCALE_SCORE) > BEGIN_VALUE
AND ROUND(A.SCALE_SCORE) <= END_VALUE
AND CONDITION_COLUMN= 'SCALE_SCORE'
GROUP BY ITEM_ID,END_VALUE
TOT_STUD_SS = NVL((SELECT COUNT(*) FROM
(SELECT A.TEST_SESSION_DETAIL_ID
FROM PSYCHOMETRIC_ITEM_STAT_OPN A, VW_SCALE_SCORE_CONFIG B,SS_ITEM_STAT_OPN
WHERE SS_ITEM_STAT_OPN.ITEM_ID=TV_SS_ITEM_STAT_OPN(LN_SSI_OPN).ITEM_ID
AND (SS_ITEM_STAT_OPN.BEGIN_VALUE=TV_SS_ITEM_STAT_OPN(LN_SSI_OPN).BEGIN_VALUE
AND SS_ITEM_STAT_OPN.END_VALUE=TV_SS_ITEM_STAT_OPN(LN_SSI_OPN).END_VALUE)
AND SS_ITEM_STAT_OPN.END_VALUE = B.END_VALUE
AND ROUND(A.SCALE_SCORE) >B.BEGIN_VALUE
AND ROUND(A.SCALE_SCORE) <= B.END_VALUE
AND CONDITION_COLUMN= 'SCALE_SCORE'
AND A.TEST_DETAIL_ID=TV_TEST_DET(LN_TEST_CNT).TEST_DETAIL_ID
GROUP BY A.TEST_SESSION_DETAIL_ID),VW_SCALE_SCORE_CONFIG
WHERE END_VALUE=TV_SS_ITEM_STAT_OPN(LN_SSI_OPN).END_VALUE
GROUP BY END_VALUE),0)
WHERE TEST_DETAIL_ID = TV_TEST_DET(LN_TEST_CNT).TEST_DETAIL_ID
AND SS_ITEM_STAT_OPN.ITEM_ID=TV_SS_ITEM_STAT_OPN(LN_SSI_OPN).ITEM_ID
AND (SS_ITEM_STAT_OPN.BEGIN_VALUE=TV_SS_ITEM_STAT_OPN(LN_SSI_OPN).BEGIN_VALUE
AND SS_ITEM_STAT_OPN.END_VALUE=TV_SS_ITEM_STAT_OPN(LN_SSI_OPN).END_VALUE);
-- COMMIT;
end loop;have a look at the MERGE statement!
P; -
HT1338 How can I format my hard drive without installation disk?
Guys I am using Mac with OS X 10.6.5. How can I format hard drive without the installation disk?
I don't have a installation disk can I buy one? where?Call Apple Sales at 1-800-692-7753 to order 10.6.
Posts concerning 10.6 should be made in 10.6 usage forum.
You posted in the 10.3 and down forum which is very old OSX software.
DALE -
I have tried a zillion times to update itunes to 10.5.2 but it won't work. Under the "About iTunes" section it says that I'm still using itunes 10.4. What I'm really trying to do is update my iphone 4 software but itunes says I can't do that without first updating the itunes software, which it won't let me do. Anyone know how to fix this? Much appreicated.
Look at the system preferences for iTunes 10.5.3. Are you running 10.5.x (Leopard) or later? If you are then please repost in the iTunes for Mac forum.
-
Can't download itunes 10.7 without updating to Mac OS X 10.6.8
I downloaded itunes 10.7 but cant install it unless i update my software to Mac OS X 10.6.8. I just got the iphone 5 and need to activate but am not able to due to that error message.
When i check software updates thats not available to not sure what to do.I am am having the same problem. My macbook is from 2009 and recently stopped updating to the latest software. Apparently my license agreement or whatever has run out and in order to get the latest software I have to pay for it. However my mac has been running so slow lately I fear paying to update for fear that my mac will just die. So sad, my mac has always been so good until recently. My itunes kept saying it was up to date and it wouldn't update my iphone, so I went to the website and downloaded 10.7 only to find out that I can't install it. So sad, my computer is officially so outdated that I can't do anything now without paying! ****....whats a girl to do. I feel you on this. Im running on Mac 10.5.8 too, and yep...were just that outdated.
-
Can new windows drivers be installed without updating to leopard?
I was wondering if the new windows drivers on the leopard install disc can be installed in windows without upgrading tiger on the other partition?
I want to upgrade tiger to leopard but want to wait till i have more time to complete the process, but i do want to check out the new windows drivers now.How would you extract the drivers from the Leopard disk?
Normally, you create/install the Boot Camp assistant, which extracts the drivers.
Anyone with Leopard installed can always supply anyone else with a new drivers disk, and, I would expect in time that the Windows system itself would be capable of obtaining the drivers. After all the main problem is that manufacturers have not yet written drivers for Windows on a Mac. Once the Mac hardware becomes "standard" there should be no problem using Windows update directly to get new drivers.
This is what I am expecting to happen with my 64-bit Vista install on this box. -
I can't install iTunes 10.7 without updating MAC OS, not sure which version to install
I just bought the iPhone 5, trying to synch with iTunes to get settings, contacts, photos etc. installed. Got a message that iTunes version 10.7 or later is required. Went to www.itunes.com and downloaded the update, got a message that it requires MAC OSX version 10.6.8 or later. My MAC (Intel based) is currently running 10.5.8. When I select Software Update, it tells me that all software is up to date. I'm not sure what to do next. After some searching, I found:
Mac OS X 10.6.8 Update Combo v1.1
Is this ok to install on my machine?There's no fine print to it. In fact, the print is just as big as everything else on the page...
Look here: http://www.apple.com/iphone/specs.html
Under System Requirements:
Apple ID (required for some features)
Internet access5
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.itunes.com/download) -
Can you turn off iCloud Drive without losing data?
I enabled iCloud drive but then discovered through some articles that one should not enable iCloud Drive until Yosemite comes out and all of one's devices are running iOS8 and Yosemite on their computes. Since enabling iCloud Drive I am missing Photostream and Pages docs that I had on my phone and god knows what else. When I went to try and turn off iCloud Drive (so I can then wait until Yosemite comes out before I re-enable iCloud Drive), I get the following message:
"Are you sure you want to turn off iCloud Drive? Some changes have not been uploaded to iCloud. If you turn off iCloud Drive, these changes will be lost." Immediately below that message is a red message that says "Delete from iPhone."
What exactly would be deleted from my phone if I turn off iCloud Drive? What changes does the message refer to? Why can't I just return my phone from iCloud Drive to the regular Cloud so I can access my Photostream and my Pages data? And why on earth did Apple not alert us to the issues we would face with iOS8 if we install BEFORE Yosemite comes out? This is so frustrating!
Thanks in advance for any advice.
TeresaI would love to hear that Apple has remedied this problem. From other discussion strings that I am following related to this issue, it seems thus far we remain out of luck. I did discover that if I log onto iCloud.com I can access my files that way. Still, what a pain.
When I got the message re iCloud Drive as I was setting up my phone after the update to iOS8, it said I wouldn't be able to access my files unless all of my devices were running iOS8 OR Yosemite. That message was misleading as it really should have said all devices need to be running iOS8 AND your mac needs to be running Yosemite, as it was not an "either or" situation. So frustrating... -
Can I partition an external drive without erasing data?
Can I do this?
Or do I need to have partitioned the drive to begin with in order to not lose my data?
I need it to be a GUID partition map for booting...I need it to be a GUID partition map for booting
That is a common misunderstanding. An Intel Mac will boot from a disk partitioned with the Apple Partition Map. What you can't do without GUID is use the Apple Installer (which is used for e.g. System Upgrades).
Andreas -
Can I use my thunderbolt display without charging my macbook pro?
First off- Here's what I have-
2012 13 inch Macbook Pro
2.5 GHz Intel core i5
8GB RAM
Stock 500GB 5400rpm HDD
Mountain Lion OSX
Anyone know how I can use my thunderbolt without charging my Macbook Pro?
Also, my Thunderbolt jack, port, and my overall computer get really hot when I'm using my display. Anyone else have this issue?
Thanks!Ohhh I see it now.... The thing is I only have 13 cycles on my battery, but the max is only 92% percent charge... I thought that would be the charger charging my MBP and using the battery at the same time.... Another thing, would you happen to know why I have a max of 92% charge and only 13 cycles? (Two different apps are telling me the same thing...)
-
Can I wipe my hard drive without reinstalling Mountain Lion?
I'm running a digital version of Mountain Lion and my Mac is still running fine, but my hard drive is almost full. I'm an animation student, so I'm thinking of wiping it to get off all the junk that I don't really need for school, but I don't want to have to reinstall my OS. Is that possible?
On another note, my disk drive doesn't burn CDs anymore. It still plays DVDs fine, but the last time I tried to burn a CD it said it couldn't "calibrate the laser power needed" or something...Is there a way I can fix that? I think it just needs to be cleaned out...If you can't run Mavericks, you can't run Mountain Lion because they have the same hardware requirements.
Check that your computer is compatible with Mountain Lion/Mavericks.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If your computer isn’t compatible, you might be able to upgrade to Lion.
Computer Compatibility - Lion Lion
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2) -
Qosmio X - Can't download wirless LAN driver update
I can't downloaded "wireless Lan driver", that update was sent by Tempro.
Why? No problems with other updates.Hi Gil_1,
The question is: Why you want to download and install this update?
If everything runs properly, you can forget the update! :)
Maybe you are looking for
-
A database connection in a swing application
hi , i am developping an intranet stabdalone swing application based on a jdbc connection to oracle8i data server. in fact i am interested in keeping my user authentification encrypted while this connection is done! is there any method to do it ! i r
-
I can no longer connect to Xbox Live with my WRT54G
A few days ago I had to exchange my xbox for a new one. For some reason I can not get this new xbox to connect to Live at all. The error message I'm getting is saying that port 3074 isn't open. The fact of the matter is that port is open. I've tr
-
Hi there. just bought a TC, installation was succesfull, but time machine won't work. can't select Backup disk. get transferred to TC install again. Called Apple, 25 min. later no succes, have to call on monday again!!!! Can anyone help me? Thanks a
-
Changing images on a random path
Is it possible to have an image cross the screen slowly on a random path for say 10 seconds, then have another image replace it and go across on another random path? i will have maybe 15 images in toal that I want to do this with! Thanks
-
Is there a way to make a text file name variable when doing an export from Essbase Via Maxl? So in the example below I would set VARIABLE somewhere to be Jan or Feb or Mar? export database 'NS115'.'GL_11510' using server report_file 'FPA_Asst' to dat