Can I update to 2.0.2 with out losing my 1.1.4 apps and installer?
I have a 1.1.4 os with Installer and Cydia. Will I lose what I have already installed if I upgrade? Is this upgrade OK? I have heard it is very, very slow?
The upgrade restores to factory firmware as part of the upgrade process.
Similar Messages
-
If i have already logged in my iTunes with my iPod and plugged that in, but now i have a new iPod and I want to plug that in to my laptop how would i do that with out losing anything on my new iPod and my old one. Both my ipods are on different accounts?
Nothing special. See:
How to Set Up Two iTunes Accounts on One Computer | Chron.com
iTunes: How to share music between different accounts on a single computer -
HT4623 Can I update my phone to ISO7 with out WIFI?
How do i update my phone with out having an WIFI connection?
You don't. The download exceeds the limits for cellular data agreed to by Apple at the request of the carriers. You will need to find a wifi node to use.
Or, plug your device into iTunes and your computer, and update it via iTunes. -
OK people who is able to help me fall back in love with my ipad3? Here go, I was in love then I lost it when I had to change my password every time I got back on. So it told me to reset it . I did. It worked yay.!!
so now I was trying to get online sitting outside my house an I was asked to put in password and ip address along with other weird things I had never had to do befor. So even inside it tells me to do this , so someone please help me please thank you.
Want A Personal Answer?
1,199,824 people are answering.Does the iPod connect to other networks?
Did the iPod connect before?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
How do you update software on iPad 2 with out computer
Can you update software on ipad 2 with out computer?
Once you have iOS 5+ installed then future updates can be installed wirelessly - but if you are still on iOS 4 or below then you will need to do your next update via your computer
-
I can't update the purchases I made with the old Apple I.D;
how can I sync my old Apple I.D. with new one?Only the Apple ID used to buy an app can update an app. Apple does not merge Apple IDs and Apple does not transfer content biught with one ID to another ID.
-
my iphone 5 is on contract from verizon,now i'm on trip to india.
can i acess gsm in india is it unlock
and my iphone shows ios update so can i update it to ios 7 with indian sim card?Verizon iPhones are GSM unlocked by default, so get a SIM and try it.
-
Unique data record means you can't update a record from ECC with same key.
Unique data record means you can't update a record from ECC with same key fileds right?
Details: For example i have two requests Req1 and Req2 in DSO with unique data record setting checked. on day one Req1 has a filed quantity with value 10 in Active data table. On day two Req1 can not be overwitten from ECC with Req2 with the same key fields but different value 20 in the filed quantity because of the Unique data record settings. finally the delta load fails from ECC going to DSO because of this setting. is it right?
I think we can only use unique record setting going from DSO to cube right?
Please give me a simple scenario in which we can use this setting.
I already search the threads and will assign points only to valuable information.
Thanks in advance.
YorkHi Les,
Unique Data Records:
With the Unique Data Records indicator, you determine whether only unique data records are to be updated to the ODS object. This means that you cannot load a data record into the ODS object the key combination for which already exists in the system otherwise a termination occurs. Only use this setting when you are sure that only unique data records are to be loaded into the ODS object (for example, single documents). A typical application of this is in the loading of mass data. It improves the load performance.
Hope it Helps
Srini -
I can't update iPhotos, I bought it with ilife a while back. Error says use your apple id you bought iPhotos to update
You can also download the necessary iPhoto updaters from this Apple website: Apple - Support - Downloads
OT -
I changed my AppleID a long time ago to an email that I no longer use and I have updates for apps that I can't update because my old email is filled in to where i sign in and it wont let me change it to my new one???
The problem with those two apps is that they are supposed to be in your Apple ID and you didn't set up the Mac properly/completely when you got it.
You might try deleteing them and using OS X Recovery to install them again.
OS X Recovery -
http://support.apple.com/kb/HT4718
After that, before you open any iLife apps go to your Mac App Store account, to the Purchased pane and Accept them into your account. -
How can I completely wipe the hard drive with out the Mac OS X disc? I don't need any of the info on the computer.
You can't unless you have a bootable system on an external drive you can use. Otherwise, you need either the original disc that came with your computer or a retail copy of Snow Leopard DVD. The latter contains 10.6.3, so your model must be capable of booting from that or an earlier version of OS X.
You can purchase replacement discs from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements. -
How can I uninstall yosemite and reinstall Loin with out losing all my in formation and programs
How can I uninstall Yosemite and reinstall Loin with out losing all my in formation and programsThis had been the worst os system apple has come out, too many errors
too many to list.
a few
Losing all mail. and watching them disappear in front of my eyes and could nothing about it
also when accessing cloud the screen just rolls in when accessing mail, like loading and loading and loading for 1 to 2 minuets.
I did not up grade my Mac Book Pro, and is working fine,
Just my iMac, its act kile avid card and it only happens access iCloud mail.
so I want to and need to go back to LoinYou can't unless you have a current backup of your old Lion system because the first thing you must do is erase the drive. It 's possible to use Target Disk Mode between your iMac and the MBP in order to clone the MBP to the iMac. However, that will still erase everything on the iMac's drive.
Or you could see about getting Yosemite to work correctly. If you have IMAP mail, then your mail should be intact.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Download and install the 10.10.1 update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Download and install the 10.10.1 update.
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
I need internet explorer 5.5 or greater in order to use an online course. I can see that there isn't a mac explorer update but is there another way? I tried the wine bottler app and it didn't work for me.
Buy and install Windows.
Then you have IE
Of course you can always do as I do when some idiot, usually with the government, tell me I need to IE. I say no. After saying no enough times they mail me a form.
I don't believe in Microsoft.
Allan -
I got a new Mac and was trying to burn from I movie to get it to a disk but new I mac dose not have I DVD . So I had my old I Life 11 disc with I DVD on it and I installed it, when I did this it did something to my I photo I can not open it at all it has a message that reads ,you can't open the application IPhoto because it may be damaged or incomplete . Now I can not get or see any of my photos how do I reverse what I did? can I take that I Life back out and how? with out losing all my pictures? and how do you burn to DVDs now without IDVD?
Diane,
Your photos are in the iPhoto Library. Almost certainly that is intact, so don't worry.
Go to your Home folder and open the folder called Pictures. What you want is in there, iPhoto Library. Don't do anything there, this is just to reassure yourself.
So it is a matter of getting the iPhoto app to work. Apps are in the Applications folder. Find it and trash it.
Next download iPhoto:
https://itunes.apple.com/us/app/iphoto/id408981381?mt=12 -
I just got an iphone 4s and I need to sync it to my itunes on my pc, but I do not want all the music and apps to be synced to my phone, can I change the settings in itunes with out hooking up my phone?
Open itunes, connect iphone,select what you want, sync
Maybe you are looking for
-
How do I use the Parameters from URL to filter on Content Query in ItemStyle.xsl?
Hi, I might need your help with code that Content Query under <xsl:Template...> that I need a filter for 3 parameter from url (from date, to date(for date range) and type. eg: www.mywebsite.com/pages/Filter.aspx?DateFrom=01/01/2012&DateTo=01/01/2013&
-
How to get images from sybase database
i have been trying to fix this code and so far after 10 hours have no succes my jsp page is coded like so... <html> <head><title>JSP The Short Course - Lesson 13 </title></head> <body> <jsp:useBean id="myBean" scope="session" class="examplebean.bean2
-
ADF: Display image from database
Hi, I've found a number of threads addressing this issue, but none that have solved my problem as yet. I'm trying to display an image from a database column in JDev 10.1.3.2.0. I've found an article in the Help that sounds like it's describing exactl
-
How can I control which display my dock displays on?
When I boot my MacBook Pro, the dock starts on my MacBook screen, but if I use my Thunderbolt display a lot, the dock suddenly jumps over there, where I don't want it. How can I force the dock to go back to my laptop screen and stay there?
-
Why when I am resizing a field do the field above and below resize with it too? I need to make them different lengths. This only happens sometimes. HELP! THANKS!