Can i upgrade Mac osx 10.4.11 to snow leopard?

I have an old imac (Early 2006 17-inch) 1.83 GHz Intel Core Duo, 1GB 667 MHz

Below are the system requirements for Snow Leopard:
System Requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple's MobileMeservice; fees and terms apply.

Similar Messages

  • How can buy the mac os x version 10.6 snow leopard?

    I want to buy the Mac os x version 10.6 snow leopard.

    Call 1-800-MY-APPLE or 1-800-800-2775.  $29 from Apple.
    Currently about $150 from Amazon and others.

  • Can I update from osx 10.4.11 to snow leopard?

    I have a mac book pro with OSX 10.4.11 and would like to upgrade it to OSX Snow Leopard.  Can I simply proceed or is there an in between update necessary?  Thanks.
    Mbota2

    Purchase a Snow Leopard DVD with which you can upgrade your current system.  Before upgrading do the following:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If all is OK then continue with the installation of Snow Leopard.

  • Upgrade from OSX 10.4.11 to Snow Leopard/OS X Lion

    I know my operating system is really behind.  Now that OSX lion is out I am very behind in terms of my operating system. Do I need to buy snow leopard first and then lion.  If so can I just buy the leopard upgrade or do I need to buy the box set also?  Thanks for the help I am really clueless about this stuff!

    If your computer meets the requirements you could upgrade to Snow Leopard or Lion, but upgrading to Lion requires that Snow Leopard 10.6.6 or later first be installed. You can purchase a Snow Leopard DVD at your local Apple retailer or online for $29 USD.
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current Tiger Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger and later.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).
    Snow Leopard General requirements
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible Internet service provider; fees may apply.
    Some features require Apple’s MobileMe service; fees and terms apply.
    Lion System Requirements
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Some features require an Apple ID; terms apply.

  • Up Grade from MAC OSX 10.4.11 to Snow Leopard

    Hi,
    I have an IMAC 4.1 currently using MAC OSX 10.4.11 which has the following spec
         Proc 1.83 Ghz Intel Core Duo    
         Memory 512 MB 667 Mhz RAM
    Is it possible that I can up grade to Snow Leopard 10.6, if I have the above spec. ?

    seems like we are facing the same problem. All tech supports indicates I can go for Leopard but not Snow Leopard because we do not have at least 1Gb Ram

  • Upgrade Mac OS 10.4.11 to Snow Leopard

    I'm an editor. I have a MacBookPro 17" with 10.4.11 looking to upgrade to Snow Leopard. Must I go to Leopard first? If not, what adventures can I expect from third party software, especially FCP Academic 5.1.1 - Adobe CS4, etc.

    Can't answer your third party software questions but you can go straight from Tiger to Snow Leopard assuming your computer meets other specifications. [Snow Leopard 10.6 Technical Requirements|http://www.apple.com/macosx/techspecs>

  • Upgrading from osx 10.5.8 to snow leopard 10.6.3....

    is that possible? I mean will my macbook(white, about 1 1/2 - 2years old) be able to run it or will I have any problems?

    HI,
    Good read here: Topic : Snow Leopard Installation and Upgrade Tips
    And here: How to Upgrade from Leopard to Snow Leopard
    Carolyn

  • How can I restore mac pro back to original with snow leopard

    I want to restore my macpro back to original, I dont have restore disk, just snow leopard disk. How can I do this?  Thanks

    A nice phone call to Apple usually results in a replacement disk being sent to you.
    I understand your intention is to give this computer away. If you were selling it, not having the original install disks dramatically lowers its value.

  • I have an OSX, Version 10.8.5.  Can I upgrade to OSX Maverick without problems

    Can I upgrade MAC OSX, Version 10.8.5, processor 2 GHZ Intel Core 2 DUO, Memory 2GB, 1067 MHZ, DDR3 to OSX Maverick??

    Yes. But you really need more than 2 GBs of RAM.

  • I upgraded my Mac from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2.  I did have Microsoft Office for Mac 2004 in my applications and now get a message "can't open Office because Power PC applications are no longer supported."

    I just upgraded my MAC from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2.  When I try to access my Microsoft Office for MAC (2004 edition) files I am getting a message "can't open Office because Power PC applications are no longer supported.  How can I access all of my save Word documents?  I just want to be able to retrieve all of my documents that were in Microsoft Office for Mac (2004).  If I purchase the newest version of MS office for Mac from Apple will I be able to retrieve my old documents?

    Use any number of free alternatives to your nearly decade old version of MS Office.
    Consider
    LibreOffice (donation-supported)
    NeoOffice (free)
    OpenOffice (free)
    In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft.

  • How can I upgrade from OSX 10.7 to 10.9 on my 2012 mac mini? (2.3 GHz, 4 GB, 500 GB SATA disk) I don't want OSX Yosemite.

    How can I upgrade from OSX 10.7 to 10.9 on my 2012 mac mini? (2.3 GHz, 4 GB, 500 GB SATA disk) I don't want OSX Yosemite.

    If your Mini shipped with OS X 10.7 Lion, then it was considered a 2011 build model, or before.
    The Mini 2012 model, is considered a Late 2012, & the last one where RAM could be upgraded.
    And it shipped with Mountain Lion 10.8, which is a fairly OK system if one had older software.
    (However mine shipped in Dec 2014, with Mavericks 10.9.0, and was built in January 2014.)
    There were a few different build versions of Late 2012 Mac Mini, the i5 or i7 processor,
    in dual-core or quad-core, and some CTO or built-to-order versions with other specs.
    You can buy Mountain Lion from online Apple Store, & use a download code emailed to you to
    get the Mt. Lion 10.8 from Apple Servers; this would be about it, since Mavericks isn't available.
    So hopefully that is an option you can exercise; in addition the computer may prefer more RAM.
    Good luck & happy computing!

  • HT1338 I am running mac OSX 10.5.8 and have bought a new iphone 5. Not able to sync my phone or connect to itunes. it requests 10.7. however when i check for software upgrade it says all upto date. How do i upgrade MAC OSX to 10.6.8??

    How can i upgrade OSX 10.5.8 to OSX 10.6.8?

    Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so Contact Apple in your Country to Purchase a Snow Leopard Disc...
    http://support.apple.com/kb/HE57
    In the US...
    1-800-MY-APPLE or 1-800-676-2775
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
    Be sure to make a Backup of your Current System Before Upgrading...

  • I am trying to upgrade Mac OSX from 10.7.4 10 .7.5 .But, the grey screen is coming for hours.  What should i do?

    i am trying to upgrade Mac OSX from 10.7.4 10 .7.5 .But, the grey screen is coming for hours.  I pressed the alt key and was taken to options viz. Restart to install MAC again, use time machine. I don't have back-up and so restarted to install MAC again. Can i cancel this now. I want my data to be secure. What should i do?

    If you cancel an install there's no telling what state it will leave your Mac in. Let it finish or fail.
    Then get a disk, it can even be a pocket drive if it's large enough and back up all your own data.
    After that, boot up holding command-r keys into your Recovery Volume.
    The screen should give you these choices...
    Restore from TM backup
    Reinstall Mac OS X
    Get help online
    Disk Utility
    First run Disk Utility Repair Disk, if you get errors run until no errors reported or reports "the disk cannot be fixed". Then, choose Reinstall OS X.

  • Can i install mac osx 10.5 or later on my mac??

    Hi!
    My my i mac has the following specs, and currently running mac osx 10.4.11....
    The question is.. Can i install mac osx 10.5 or later?
      Model Name:    iMac
      Model Identifier:    iMac5,1
      Processor Name:    Intel Core 2 Duo
      Processor Speed:    2.16 GHz
      Number Of Processors:    1
      Total Number Of Cores:    2
      L2 Cache (per processor):    4 MB
      Memory:    2 GB
      Bus Speed:    667 MHz
      Boot ROM Version:    IM51.0090.B09
      SMC Version:    1.9f4
      Serial Number:    CK6****QVUW
    Thanks!

    Yes, assuming you have enough disk space, you can install 10.5 Leopard, 10.6 Snow Leopard, and 10.7 Lion.  If you want to upgrade to 10.7 Lion, I'd recommend a memory upgrade to at least 4GB.

  • Can i install mac osx back again after installing windows 7 on my mac book a1181?

    i have apple mac book a1181 white, but i had problem logging on as it was secured by a password, and i allready lost my recovery dvd, so i installed windows 7 on my mac book a1181 by deleting its partition from GTP to NTFS but i experienced problems after installing windows 7 as sound was not comming as i could not find sound drivers for macintosh, so now i plan again to restore my apple macbook a1181 back by reinstalling mac osx 10.5.8, how can i again install mac osx on my notebook and is it possible to re-install mac on my notebook? please give me some help.

    Insert your OS X install disc and restart holding the C key, hold it down until you see the Apple logo and spinning gear. Choose your language and at the next screen from the top menu bar select Utilities-Disk Utility. Select your internal hard drive, click on the Partition tab and select 1 partition. Click on the Options button and select GUID partition scheme. Click OK. Choose to format the drive as Mac OS Extended Journaled. When Disk Utility is done and your drive is properly partitioned and formatted quit DU and go back to the installer screen and reinstall OS X. When you're up and running run software update a couple times to get everything up to date as far as you can with 10.5.8. Then consider upgrading to OS X 10.6.8 Snow Leopard for $19.99 here http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Maybe you are looking for

  • Pages v5 and v4 compatibility

    I just installed Pages 5.5.2 after working in Pages 4.3 for the last three years... no wonder everyone is giving 5.5 such a bad rap (refer to the number of 1-star-I-hate-it votes on the App Store). My problem is Pages v4.X and Pages v5.X compatibilit

  • Error while making vendor rejection through 122 mvt

    Dear Friends, User made GR for a Subcontract Material against a Scheduling Agreement. Then part qty he wanted to reject through 122 mvt. System gives the following error. Purchase order 8101000081 00210 has no component 000ADC120000 in plant 1000 Mes

  • The document could not be saved.  There was a Macintosh system error (-38).

    I am getting this error when I try to save a document that I am working on in Acrobat. I thought Macintosh system errors went away with OS 9? Please let me know your thoughts.

  • Screensaver does not end after specified time

    i am running 10.6.4 on a 2008 Mac Pro. i have set the "flurry" screensaver to start after 5 minutes of inactivity, and set the display to go to sleep after 10 minutes. The screensaver starts after 5 minutes but does not turn off after 10 minutes, it

  • Business Rules - Configure Entities/Scope without elimination rules.

    Hello Experts, I am working on BPC 10 and have set many elimination rules that apply to all "SCOPE". Is there a way to configure that for a given "SCOPE" elimination rules may be nullified, you bone not apply to a SCOPE in particular? Thanks for your