Can I upgrade my e9150t front panel 2 usb from 2.0 to 3.0?

I have an e9150t about 5 or so years old. I just added a USB 3.0 card to it. Can I somehow upgrade or swap out the front panel top left 2 usb slots with 3.0?
Thanks

Hi,
I think this is just a DIY (do it yourself) job and you can do what ever you want after warranty period.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How can i use the same front panel graph in more than one events in an event structure?

i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.

Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi ‏12 KB
graph and local variables.vi ‏12 KB

Where can I buy a white front panel for my ipad4?

My front panel of mi Ipad 4 wifi has broke, where can I buy the original front panel????

The standard 1-year Apple Care warranty only covers defects in materials and workmanship, not damage due to accidents.
Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

How can I save an EXE front panel image to a file?

The methods to save a VI front panel image to a file don't work on executable applications. How can I save an EXE front panel image to a file? (LabVIEW 6.1)

Hi,
i wrote some vi that save FP to image and created exe and it works fine. How do you save FP to image in VI?
If you use VI server method "Get Panel Image" and use "Write JPG file" ( or BPM) it works fine.
Attachments:
fp.zip ‏40 KB

How can I embed video on front panel ?

I need to embed the IMAQ vision window on the front panel(video acquistion).

The newest versions of LabVIEW (7.0) and IMAQ (2.6) give you an easy way to embed the image on your front panel. They have a image control that you can put on your front panel and wire your image to.
If you don't have LV 7, your only option for display is the WindDraw window (for fast display). This can be embedded on the front panel by using the "Make IMAQ Child.vi", which can be found on the Developer zone. It takes a little more work, but looks pretty good.
Bruce
Bruce Ammons
Ammons Engineering

Can i upgrade to mac os x 10.8 from mac ox 10.6.8

can i upgrade to mac os x 10.8 from mac os x 10.6.8?

OS X 10.8 is not released yet so no one knows what the system requirements will be.
What model MacBook Pro do you have? To find out go to  > About this Mac, and click More Info... The model will appear under "hardware profile".
It is highly likely recent MacBook Pro models will be able to run OS X 10.8 just fine.
However, since the very early ones cannot run Lion, it is doubtful they will be able to run Mountain Lion. So the answer depends upon which model you have.

Can i upgrade to 10.6.3 snow leapord from 10.4.11?

Can I upgrade to 10.6.3 snow leopard from 10.4.11? If so, can I just purchase the snow leopard disk or do I have to purchase the mac box set?

Assuming your system has the minimum technical specifications then yes you can purchase just the SL Retail disc and perform the upgrade. As with any OS upgrade I would STRONGLY recommend following the suggestions in this Update Process post. The minimum tech specs for SL are:
System Requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple's MobileMeservice; fees and terms apply.

HT2305 can i upgrade my ipod touch to ios 5 from 4.2.1?

can i upgrade my ipod touch to ios 5 from 4.2.1? correction

You need an iPod Touch 3rd Gen or later for iOS 5...
http://www.apple.com/ios/features.html
Check your Device Model Here > http://support.apple.com/kb/ht1353

HT2305 can i upgrade my ipod touch to ios 5 from 4.3?

can i upgrade my ipod touch to ios 5 from 4.3?

Below that topic is the topic that says:
Update your device using iTunes
Go to the link I provided in my first reply and click on that topic and follow the instructions.

How can i edit graphs on front panel?

Hello!
My problem is the following:
I need a front panel, where i can edit the graph. It doesn't need to be very complicatted. It means, there is 5 steps. For example: It will control a thermal chamber, and it should give 25 celsius for 2 hours, then cool down until 2 hours to -40 celsius, 4 hours on -40, then back to 25 celsius until 2 hours, stay there for 2 hours, up to 105 celsius until 2 hours, 4 hours on 105 , 2 hours down to room constant, stay 2 hours there. But i need to be control the levels. The temperature levels, and the time periods. It's nessesery to control this on front panel. I've found a vi , which is reading in *.lvm files with datas x,y and then it's interpolating. But it is not setable after setting.
Please help me. Thank You very much!
Solved!
Go to Solution.

If you want to specify the profile graphically then you can use cursors to do it. An old example can be found here. You may find others by doing your own search (hint, hint).
Otherwise, you can simply use a multicolumn listbox to specify the indvidual profile segments, and a graph can be used to display the entered profile whenever the listbox changes.

How can I hide the main front panel when I run from the executable?

Hopefully this is an easy question. I have an application where the front panel is not the main GUI and I would like to hide it when the program runs, but only when it runs from the executable. How can I do this?

NIquist wrote:
Yeah, don't do that. Executables built in LV require at least one front panel to be open. If it isn't, the run-time engine automatically closes the executable. I haven't checked recently, but I assume this is still the case.
Instead, you can set the FP state to minimized (as suggested earlier) or (better) to hidden.
P.S. one side point - the property and invoke nodes have a shortcut - if you use the Application or VI classes and don't connect a reference, they default to the current app or VI. That means you don't have to open the reference.
Try to take over the world!

How can I close a remote front panel by closing only the browser window?

I control a remote front panel in a browser (from the client PC). If I don't use the 'close' - button in my program to end the remote front panel, but instead of this the 'x' of the browser window (in the right bottom corner), my program won't be close, it continues on the server. Do you know how to end a VI by closing only the browser windows?
Thanks for any help!
wolfe

I found the examples. Thanks.
But I could not find a solution yet. Now I know how to end a VI by clicking on the x of the VIwindow.
My problem is, to end a VI by clicking on the x of the BROWSER window after I loaded and controlled a remote panel VI in a browser (e.g. IE).
If you have any ideas ... I'd be happy.
Thanks for your help.

To connect a soundblaster audigy 2 ZS to a DELL dimension 8400 front panel headphone/USB jac

Open your case and look at the your front panel USB and Headphone jacks.... look for a black cable and follow it with your fingers until you get to the end. Its should be plugged into your MOBO in a white socket. Carefully unplug it and plug it into a white socket on the top of your AUDIGY. The cable is barely long enough and you might have to mess with it to get it to reach........ that's it!!!!!!!! You can now use your front panel Headphone and USB jacks with your AUDIGY!!!!!!!!!!!!!!!!!!!!!!!!!!!!
:::::::::NOTE::::::::::::
Some older Audigy ZS's might not have the white plug.............Message Edited by MetalFloyd99 on 08-05-2005 08:2 AM

Open your case and look at the your front panel USB and Headphone jacks.... look for a black cable and follow it with your fingers until you get to the end. Its should be plugged into your MOBO in a white socket. Carefully unplug it and plug it into a white socket on the top of your AUDIGY. The cable is barely long enough and you might have to mess with it to get it to reach........ that's it!!!!!!!! You can now use your front panel Headphone and USB jacks with your AUDIGY!!!!!!!!!!!!!!!!!!!!!!!!!!!!
:::::::::NOTE::::::::::::
Some older Audigy ZS's might not have the white plug.............Message Edited by MetalFloyd99 on 08-05-2005 08:2 AM

Can i upgrade cpu of my late 2009 macbook from intel core 2 duo to intel i5 for i7?

My macbook is a late 2009 macbook with 2.26GHz Intel core 2 duo processor with 2GB DDR3 memory. Can I upgrade its processor to latest dual-core intel i7 processors?

However drop an SSD in that puppy and bump the RAM to 8 GB and you'll never miss the i5 or i7 processor.
http://eshop.macsales.com/Reviews/Framework.cfm?page=/Benchmarks/CS6BenchmarkPag e-MacBook.html
I only deal w/ OWC. Done 6 Macs so far: Mini, MBP MB Unibody 2009 like yours and not a hint of a problem w/ any of the installs.

870A-g54 front panel audio missing from bios

Boy is this motherboard full of glitches. Teaches me a lesson about buying the cheapest for crossfire.
I would really love to use my front panel audio. Only problem is my front panel audio isn't in the BIOS!
When i bought my 870A-G54 I had to do a BIOS flash to support my six core CPU. Could the BIOS flash have changed my BIOS menu and taken away the front panel audio setting?
Lol does the motherboard even have an option to turn front panel audio on and off?
I had the bios flashed in the store the moment i baught it so i dont know how the bios looked before the flash. The Guy failed to flash my board because he had the wrong bios update and it was too big. So i had to download the right one from msi myself. People like that shouldn't work in computer stores.
My front panel audio has one of those single plug and go audio cables so im shure i couldn't install it wrong, even had the manual next to me.
Am i to be stuck without front panel audio??

Quote from: Stu on 20-October-11, 03:51:31
BIOS does not have any options for front panel audio, it is controlled by the Realtek Audio Manager control panel.
What's the exact problem you're having?
Well i plug in my headphones to front audio and the software should recognize it and light up the ports on screen. But they stay greyed out and i have no mic or audio.
On my old asus motherboard i had to make shure front panel audio is turned on sorry for the confusion.
any idea why it doesn't pick up my headphones?
Ive tried diffrent headphones lol they dont work either

Can I upgrade my e9150t front panel 2 usb from 2.0 to 3.0?

Similar Messages

Maybe you are looking for