Can I upgrade(replace) hard disk in my laptop?

Hello ,
I want to ask an expert opinion about upgrading or replacing a hard drive in laptop. I plan to increase my hard drive capacity by replacing my old 500GB Hard Drive to 1 TB Hard Drive. It is possible to do so?
This bit of information my laptop,
I hope somebody will help me answer my question,
Thank You
Solved!
Go to Solution.

hi LV7,
Thanks for Posting!
These are the 1T HDD that can be preloaded with a V480
These can be found on your system's Maintenance Manual
http://support.lenovo.com/en_US/downloads/detail.page?DocID=UM013171
a Hard drive Replacement does not restrict other model ust make sure they meet hese specs
Physical Spec
Form Factor
2.5"
Height (maximum)
9.5mm
Width (maximum)
69.85mm
Length (maximum)
100.2mm
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

How can i get my hard disk cable replacement

how can i get my hard disk cable replacement in Ghana

Remove or rename a folder on the root level probably called something like Private or Video or DCIM.

Upgrade internal hard disk on ibook G4

Hello,
I am interested in upgrading the internal hard disk of my ibook G4 from 40GB to something better. Is there an Apple service centre in bangalore, India which will do the upgrade? what manufacturer/model# of HDD will be suitable for my 2005 ibook G4?
Can I run Aperture/Adobe photoshop on the same as in will the system be suitable for that application? I have 1.5 GB ram and an external display attached to the laptop.
thanks
-kamal

The words you quoted are supposed to usually mean they
have "service" or access to someone who would be able
to repair or upgrade a computer within Apple specs; those
are usually authorized to do the work, but not Apple.
Some companies doing that kind of work, who don't have
a staff repair service, may collect those for repair and an
other company may pick them up for off-site service.
In some areas, with more than one company listed in the
page resource I cited, some of them are product specialists
and know the line of portable computer very well, so they
would be able to do most things and check it thoroughly.
But those who do not really work on the computer in their
store or attached service (having none) should be checked
into more carefully to discover what they do/where it's done.
The post linked to in your earlier inquiry, where someone
replied to you there with three links to web pages of info,
is worth considering; in that these kinds of jobs can be
tedious and take a great attention to detail with care to not
damage the fine wires and parts inside these portables.
And a skilled tech, with that kind of information, may be
able to replace an iBook's hard disk drive; but some who
only work on Windows OS & PC hardware may be lacking.
Especially when it comes to moving the contents of the
existing drive (or just migrating existing user accounts, etc)
from the old hard drive into a new system installed on the
new replacement hard disk drive.
Some areas of the world are harder to find the resource to
get a job done correctly; when an old iBook portable I had
for a time needed a reed-switch and cable replaced to fix
a display defect when the lid was opened/closed, I ended
up sending the iBook from AK to SC. (Across the continent.)
No body did the work in my area, or if they really did, charged
more than twice what I paid including shipping it both ways.
More than 5,000 miles. Since then, sold, the iBook still works.
Unfortunately sometimes good qualified service is where
you find it after some effort of looking; where I live by some
comparison, has almost no people; just great natural beauty.
Hopefully someone or another you contact can refer you to
a reasonably fine shop of careful people who are qualified.
You may have to ask around, and perhaps expect the iBook
to be transported miles to some other facility for that job.
PS: are there any indications of an "apple user group" of
interested owners who have, use and meet to discuss their
shared community of those interests, in your area? If so,
sometimes people who get together like that know more.
Good luck & happy computing!

Faild -replace hard disk 1 ( warranty id - error code 10008)

faild -replace hard disk 1 ( warranty id - error code 10008)

Hi,
The error would indicate that your Hard Drive is failing and will need to be replaced.
If your notebook is still under warranty, contact HP and arrange to have the drive replaced - you can check your warranty status Here.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know - include the full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HT5313 How can i change my hard disk up to 250 GB or 500 GB ?

Can i change my hard disk up to 200 GB or 500 GB ? if i can,how should i do ?

Clone backup current drive to an external disk (SuperDuper or Carbon Copy Cloner). The external disk should be a FireWire drive so you can boot it (I believe the White MacBooks only booted external FireWire drives). You should test booting the cloned external before continuing. Or you could clone the current MacBook drive to the new replacement drive, which could be done via USB or FireWire.
If I recall correctly, remove the battery, remove a metal shield, pull out the current drive, remove the bracket, attach bracket to new drive, slide new drive back in, put metal shield back on, put battery back in.
If you cloned directly to new replacement drive, boot up your MacBook and enjoy.
If you cloned to an external FireWire, boot the external cloned FireWire drive, and clone it back to the new replacement drive.
If you consider your data valuable, have yet another backup to a different drive before starting just to be safe.
There should be YouTube videos that will show you how to do this, or search MacSales.com for how to videos.
Message was edited by: BobHarris

Hp Pavillon dv9700 --Windows Vista 32-bit--#10009 replace hard disk

when i am trying to boot my laptop it say operation system not found.So i have done memory test for hard disk it says #10009 replace hard disk.
1.Are there any ways to solve this issue.
2.If not can i replace with higher memory hard disk .
3.are there any ways to retrive the data from the old hard disk.
4.what are all the reason why my hard disk get destroyed?

Welcome to the HP Forum!
pothulavijay wrote:
when i am trying to boot my laptop it say operation system not found.So i have done memory test for hard disk it says #10009 replace hard disk.
1.Are there any ways to solve this issue.
2.If not can i replace with higher memory hard disk . Yes.
3.are there any ways to retrive the data from the old hard disk. You can try putting it in an external enclosure to see if it can be read from the OS of another PC you have access to. There is no guarantee that it wil work.
4.what are all the reason why my hard disk get destroyed? Sadly,It just happens. That is why many of us back up important information to an external hard disk.
please identify your notebook with the p/n from the barcoded sticker on:
the bottom of your notebook or on the first screen of the BIOS.
Please post that information here and I will be able to provide you with more information
If you notebook is still in warranty the hard drive can be replaced as a warranty item (at no cost to you for the part).
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Error - #10008 Replace hard disk 1

I am pretty sure my hard drive has gone bad from other posts I have been reading.
I dont need any data off of this device. I actually was just about to start deleting old data so I could give this device to a family in need. Went to start the computer to start this process. However, when I went to do this it went to BSOD. Messed with it a little bit, then I got BSOD. I fillany figure out to run test and got the #10008 replace hard disk 1 error.
As I would still like to give this family this laptop, my question is: Where could I buy a cheap replacement hard drive. Is it hard to do? And I dont think I have a back up/ install disk to but on operating system. What would I need to do to get that going and would it be affordable.
I am totally willing to put in the work to get it back up and going, but was woundering if anyone would be willing to give me some instruction on how to do this.
Thanks a million for any advice and help.
This question was solved.
View Solution.

Hi,
Regarding reinstalling the OS on the new HDD, here are two options.
1. You can order a replacement set of Recovery Discs using the link below - these will reinstall the operating system, all required drivers and nearly all of the original software ( the exception often being trials of MS Office ). They will also re-create all the original partitions, including the Recovery Partition.
Order HP Recovery Discs.
2. Another option you could consider is to create your own Windows 7 installation disc.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook - this is listed as Windows 7 Home Premium 64bit ) from the link below and use an application such as ImgBurn ( Note: You may want to de-select the additional software offerings during the installation of ImgBurn ) to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. The Windows Image source is Digital River.
Windows 7 Home Premium SP1 64bit.
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Additional drivers and software you may need can be found Here.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Replacement Hard disk for Portege P2010 - Part number required

Can anyone tell me what the part number is for a replacement Hard disk for Portege P2010 is? It has the latest BIOS installed, can the HDD capacity be higher than the original 30gig?
Thanks
Martin

Hi
Like Ivan said, there are no officials documents about a max size of a HDD.
I assume that you can use a 40 GB HDD but Im not 100% sure if the bigger HDDs will work.
Please check this link:
http://www.sparepartswarehouse.com/devicetype-vendor-modelline-modelseries-partlist.aspx?devicetype=0&vendorlevel=ModelSeries &modelseriescatid=50972&partcatid=140744&filter =0
There you will find a 40GB HDD for Protg 2010.

How can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?

QuestionHow can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?
AnswerThere are a few simple steps you can take to ensure your hard disk drive is used optimally.
Use Toshiba HDD Protection
Many Toshiba laptops come with a program called Toshiba HDD Protection pre-installed. This program helps to protect your hard disk drive from being damaged due to falls or impacts. By default, it should already be enabled. You might be tempted to lower the detection levels in this application, but doing so could cause your hard disk drive to be damaged. Remember that while the application can reduce the chance of damage, you should still avoid allowing the laptop to fall or suffer rapid impacts.
For more information on this utility, see the following article:
TOSHIBA HDD Protection
Optimize the drive
Windows 8 and Windows 7 optimize hard disk drives automatically through a process called defragmentation. Unless you've disabled this, you don't need to do anything. If you have disabled this and want to run the process, you can still do so.
In Windows 8, search for "Defrag" at the Windows Start screen and select "Defragment and optimize your drives."
In Windows 7, search for "Defrag" in the Start Menu's search field and select "Disk defragmenter."
You can use this tool to optimize your hard disk drives, allowing Windows to find needed files faster.
Remove items from startup
Some applications run automatically when Windows starts. This can add additional functionality, but it also decreases the performance of your computer. Sometimes you might want to disable certain programs from starting automatically.
In Windows 8, search for "Task Manager" at the Start screen. Select the "Startup" tab. Select an application you'd like to disable from starting automatically and then click the "Disable" button in the lower-right.
In Windows 7, type "msconfig" in the Start Menu's search field and press ENTER. Uncheck the boxes next to applications you'd like to disable from starting automatically.
You should be sure of the purpose of an application before disabling it from starting automatically. Some applications might be important. If in doubt, you might consider searching on the Web to discover more information about a program. Remember that if you find that you disabled something vital, you can always re-enable it.
For more information, please see the following video:

QuestionHow can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?
AnswerThere are a few simple steps you can take to ensure your hard disk drive is used optimally.
Use Toshiba HDD Protection
Many Toshiba laptops come with a program called Toshiba HDD Protection pre-installed. This program helps to protect your hard disk drive from being damaged due to falls or impacts. By default, it should already be enabled. You might be tempted to lower the detection levels in this application, but doing so could cause your hard disk drive to be damaged. Remember that while the application can reduce the chance of damage, you should still avoid allowing the laptop to fall or suffer rapid impacts.
For more information on this utility, see the following article:
TOSHIBA HDD Protection
Optimize the drive
Windows 8 and Windows 7 optimize hard disk drives automatically through a process called defragmentation. Unless you've disabled this, you don't need to do anything. If you have disabled this and want to run the process, you can still do so.
In Windows 8, search for "Defrag" at the Windows Start screen and select "Defragment and optimize your drives."
In Windows 7, search for "Defrag" in the Start Menu's search field and select "Disk defragmenter."
You can use this tool to optimize your hard disk drives, allowing Windows to find needed files faster.
Remove items from startup
Some applications run automatically when Windows starts. This can add additional functionality, but it also decreases the performance of your computer. Sometimes you might want to disable certain programs from starting automatically.
In Windows 8, search for "Task Manager" at the Start screen. Select the "Startup" tab. Select an application you'd like to disable from starting automatically and then click the "Disable" button in the lower-right.
In Windows 7, type "msconfig" in the Start Menu's search field and press ENTER. Uncheck the boxes next to applications you'd like to disable from starting automatically.
You should be sure of the purpose of an application before disabling it from starting automatically. Some applications might be important. If in doubt, you might consider searching on the Web to discover more information about a program. Remember that if you find that you disabled something vital, you can always re-enable it.
For more information, please see the following video:

How to upgrade the hard disk of the nomad jukebox

I read the FAQ of nomad on nomadness.net, I wanna know how to upgrade the hard disk of old nomad jukebox with a bigger one?
I also read a artical on tom's hardware about this,
http://www7.tomshardware.com/mobile/20000/mp3-3.html
but he gave a link
http://www.kuren.org/jukebox
that is not available. He mentioned that it need to clone the fist 65536 sectors from the old disk to the new one, but I have not the old hard disk( I bought a second hand nomad jukebox without the original hard disk). How should I do?
Does someone have the image file of the fist 65536 sectors from the old disk?
Thank you!

That was the old method before Creative published their Bootcode Flasher software.
Follow the instructions here:
http://www.nomadness.net/modules.php...ticle&artid=24
All files mentioned are available somewhere on Nomadness. Also check out the sticky thread in their JB section of the forum as it lists what hard dri'ves will work in a JB and which ones won't. I hope you haven't already bought your upgrade hard dri've.
I used the above method without any problems and now have a 20GB JB.
PB

Can't boot from hard disk or from windows 7 recovery dvd

I have a 970A-G46 motherboard.
I can't boot from hard disk or from a windows 7 recovery dvd.
If I move the hard drive to another PC, it boots fine.
If I put the DVD in another PC's dvd drive, it can be accessed.
This machine will boot from an Ubuntu dvd and I can then access the HD directories and the recovery dvd.
What do I need to do?
Help and thanks

"I can't boot from hard disk or from a windows 7 recovery dvd."
What is that DVD from? Is it from a previous computer of some kind? Same question for HDD and the OS on it.

I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

How do you disabled it if running the same?

Getting "replace hard disk error (#10008)" even after replacing hard disk

Hi!
My laptop- HP Pavillion dv 6502- is 4 years old.
Recently, the hard disk supposedly crashed as I was not able to get anything other than a blank screen. I checked with BIOS diagnostics, and it showed error #10008- Replace Hard disk.
So, I went to an hp service centre and got the hard disk replaced.
My earlier hard drive was a Seagate 160 gb momentus 5400.3 disk.
New one is the Seagate 250 gb disk.
The laptop was working properly the day the hard disk was replaced. BIOS diagnostic status for the disk was "Passed"
But, the very next day when i tried starting the system, I got a blank screen again. I again went to BIOS and ran the diagnostic test. I performed the test twice. It took a lot of time to finish- jumping from Reaching till '80% complete', then jumping back to '10% complete', then '90% complete', then '10% complete', and so on.. finally showing '100% complete' and status : #10008 - Replace hard disk - both the times.
Then, I had to go out of station and so, I didn't touch my laptop for 2 days. When i came back, the computer was working fine and the BIOS test status said "Passed" for the disk
What could be the problem due to which my problem wasn't starting earlier- even after replacement of disk? Is it possible that the disk was not the problem in the first place?

Hi!
Turned out the second new Hard disk was also not fine. I went back to the service centre and got the hard disk replaced again. This time the laptop has been working fine.

Can connect to USB Hard Disk via OS X 10.5, but not 10.5?

I'm able to connect to my USB Hard Disk in OS X 10.5 by simply going to "SHARED" in the Finder, but I don't see it anywhere in OS X 10.4. My 10.5 computer is connected to the AirPort Extreme via wireless, my 10.4 computer (it's actually OS X Server 10.4.11 ) is connected via a LAN port.
If I go to the Finder and select "Network" I just see "Servers" which shows the 10.4 system I'm on. I don't see anything about the AirPort Extreme or USB Hard Disk connected to it.
Any ideas on how I can see the USB Hard Disk on OS X Server 10.4.11 connected to the AirPort Extreme via a LAN port?
Thanks!

You should be able to connect to the disk via SMB from your 10.4 computer. Do you know the IP of the airport express base station? If so, use the Go menu from the Finder of the 10.4 machine and use *Connect to Server*. Enter the Server Address as smb://basestation.ip.address.here and click connect. It should present you with a login box and then mount your shares when you provide the correct credentials.
On my airport extreme base station I have File Sharing enabled with base station password, guest access NOT allowed. My credentials are my account username (probably doesn't matter what name you put) and the base station password. It mounts the shared disk perfectly.
Under 10.5, this method (for me anyway) has been MUCH more reliable than using the Airdisk feature. I disabled Airdisk on the client and now I always mount the share using SMB this way. It seems snappier and the problem where I used to get a drive mounted but then be unable to see anything on it has gone away.
If you want it to automount each login (I know this method works on 10.5, can't remember about 10.4) use the *Connect to Server* dialog and enter the Server Address then click the + sign to add the server to your Favorites (the box under the Server Address line.) Then go to your Library folder in your Home directory. You will see the link you put in Favorites stored there as a file. Drag that file into the Login Items list in your user account in the Accounts pane in the System preferences. To see the connection on your desktop you need to make sure you have your Finder Preferences set to show *Connected Servers* on your Desktop. Click on the Finder menu (when you have Finder selected), then Preferences.

How I can backup from another Hard disk through my Macbook air?

How I can backup datas from another external storage disk by using My Macbook Air?

How I can backup from another hard disk through my Macbook air in Time Capsule?

Can I upgrade(replace) hard disk in my laptop?

Similar Messages

Maybe you are looking for