Can I upgrade to Mountain Lion and to Mavericks?

I never upgraded any further than Snow Leopard because I thought my MacBook Pro couldn't, I'm now thinking I made a mistake.  I have been reading some of the posts on here and it seems that if the Mac is mid/late 2007 it can be upgraded.  I have found out through my serial number that it was made in March 2007 obviously bought a little later than that but it is boarder line on the recommendation.  These are the specs for the macbook, if anyone can put my mind at ease it would be helpful, i just need to know if upgrading is really worth my while.  I run an imac and it's completely up to date so I know what I'm missing.
  Model Name: MacBook Pro
  Model Identifier: MacBookPro2,2
  Processor Name: Intel Core 2 Duo
  Processor Speed: 2.16 GHz
  Number Of Processors: 1
  Total Number Of Cores: 2
  L2 Cache: 4 MB
  Memory: 3 GB
  Bus Speed: 667 MHz
  Boot ROM Version: MBP22.00A5.B07
  SMC Version (system): 1.12f5
  Serial Number (system): W871146LW0G
  Hardware UUID: 00000000-0000-1000-8000-0017F2D69AC1
  Sudden Motion Sensor:
  State: Enabled

No. You need the same requirements for Mountain Lion as for Yosemite. You need a model identifier of 3,1 or later.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
             Identifier 5,1 or later.
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
         7. Xserve (Early 2009) - Model Identifier 3,1 or later.
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Similar Messages

  • Can I upgrade to mountain lion and skip snow leopard from my OS X 10.6.8?

    Hi guys, Im not sure on this thus any one can advice me on this?
    I'v missed the snow leopard upgrade and now came the mountain lion; can I just upgrade and down the m.lion directly? Or do I need the snow leopard in order to install the mountain lion?

    Mac OS X 10.6.8 is Snow Leopard and can be upgraded directly to Mountain Lion 10.8 without going through Lion 10.7.
    (70239)

  • I upgraded to Mountain Lion and now I can't use any of my software!

    What a disaster and huge mistake.  Upgraded to Mountain Lion and now I can't run Autocad 2012 for Mac, any of my Adobe Creative suites software such as Photoshop, Illustrator.. and now I can't even do upgrades because Mountain Lion doesn't allow me to launch DMGs.  I've lost thousands of $'s in software, not to mention time, but most importantly now I can't even work!  I just tried to revert back to Snow Leopard by intalling it back in my hard drive and it won't let me.  I never used Time Machine.  Is there any way on earth I can revert back to my old operating software???  Please help.  And if you haven't upgraded yet and are thinking about it.  BEWARE - and don't do it.  I've been reading that Mountain Lion isn't working with Microsoft applications either.  Omy...I haven't even checked that. 
    and of course no one at Apple support can or will help me

    lunaulu wrote:
    It's not my Microsoft that I use much or am worried about.  I can't run AutoCAD.  and I can't update AutoCAD either.  When I try to mount an update just to get it working, it says it can't run the DMG file.  Apparantly this new platform doesn't use Rosetta - which is needed to run any of these updates or downloads.  ***?  and then When I try to open CS4 appliations - Adobe Photoshop, Illustrator, or InDesign - I get the message "Licensing for this product has stopped working - Error 150:30 - ***? 
    So basically I can't use ANY of the programs I ran before.  And yes I have googled desperately all day.  Adobe has some suggestions - like deleting a Flex files - which I did...Defragmenting - which I did.  And most importantly provides am Adobe Licensing Repair tool to fix - which I can't open because Mountain Lion won't mount the DMG in order to run it!  It's a complete disaster and I don't have the money or time to purchase and or reinstall everything.  I am just screwed. 
    No you are not, calm down, cbs20 already gave you the answer on opening dmg files, updates are available for most of your programs and I assume you have licenses for the Adobe products. AutoCad you'll have to wait for.
    And please .... Start Backing Things Up, you could lose it all without one, work included.

  • I just upgraded to mountain lion and I can't figure out how to use messages...  it wants me to use AIM or something like it, but I can't change the user...

    I just upgraded to mountain lion and I can't figure out how to use messages...  it wants me to use AIM or something like it, but I can't change the user... How do I do this??

    See this Thread

  • I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    Check the Epson web site for updates to drivers and Epson scan software.

  • I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do?

    I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do? Also, I can not get start up chimes unless I have the factory startup disk in. Can the PRAM be reset with the factory startup disk in or must the mac boot from the hard drive? Need help.

    Help for forgotten passcode >   iOS: Forgotten passcode or device disabled after entering wrong passcode
    When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
    Try a search >  iOS: Understanding Spotlight Search

  • Selling macbook Pro 2011. It came with Lion, I upgraded to mountain Lion and Mavericks. Can license be transfer to new owner? how?

    selling macbook Pro 2011. It came with Lion, I upgraded to mountain Lion and Mavericks. Can license be transfer to new owner? how?

    Good question now that Mavericks is free to all.
    It used to be - and is probably still the case - that to comply with the license you should erase and re-install the OS that came pre-installed on the Mac when new. If there were restore disks they needed to be passed on with the Mac.
    I'm happy to be corrected on this by someone who's more au fait with the legalese, but an upgraded OS is tied to an AppleID whereas the original OS is tied to the computer, not an AppleID.
    My guess is, that if you launched the Recovery HD, erased the drive using Disk Utility and re-installed the OS, Lion would be installed.
    Be interesting to see what others say.

  • I upgrade to mountain lion and my cannon MX310 scanner doesn´t work. What can I do?

    I upgrade to mountain lion and my cannon MX310 scanner doesn´t work. What can I do?

    Download and install the MX310 scanner driver and MP Navigator from Canon.
    http://support-au.canon.com.au/P/search?model=PIXMA+MX310&menu=download&filter=0 &tagname=g_os&g_os=Mac%20OS%20X%20v10%2E8

  • I upgraded to mountain lion and now iMovie dose not see my Canon XHA1 . Can anyone help?

    I upgraded to mountain lion and now iMovie dose not see my Canon XHA1 . Can anyone help?

    I upgraded from the app store. It is actually quite awhile ago so I do not remember how. I think I used a thumbdrive to create some type of file. No I do not have any backups. My iLife CD is nowhere to be found because this is a very old macbook pro that I've had for a couple years.
    Thanks for taking the time to help

  • I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films.

    I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

    I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

  • I have recently upgraded to mountain lion and I can not get the calendar application to work. I con appears on the side put on calendars. Any suggestions

    I have recently upgrades to Mountain Lion and I can not get the calendar utility to come alive. Icon appears in the tast bar but the application does not launch or appear to be any where else. Any suggestion?

    Did you look in the Applications folder for Calendar? If it is there, remove the item that is in the Dock and replace it by dragging the Calendar application to the Dock.
    If it is not there, did you have iCal located somewhere other than the Applications folder when you upgraded?

  • I did have the ability to "save" in PAGES. I upgraded to "Mountain Lion", and now I can not "Save". Help please!

    I used to be able to "Save" my material in PAGES. I upgraded to "Mountain Lion" and now when I go to "Save", it says "permission denied". How can I correct this?
    <E-mail Edited by Host>

    Several users have had this problem in Mountain Lion. The system has decided you don't have read/write permissions. Have you done any updates to your system lately? Using Disk Utility to repair permissions after any upgrade or update, especially to the system, is a good practice. So first, I would repair permissions & then if you still have the problem, locate the file in Finder & go to File > Get Info & look in the Sharing & Permissions section. You should be the only one with read/write permissions but something has happened. Click on the words under "priveledge" next to your name & change it to read & write. You will probably have to enter your admin password.

  • My 2009 iMac is version 10.5.8 and build 9L31a. How can I upgrade to mountain lion?

    My 2009 iMac is version 10.5.8 and build 9L31a. How can I upgrade to mountain lion?

    You'll have to purchase, install and update Snow Leopard from the Apple Store to get the App Store application.
    Mountain Lion is only sold via the App Store.

  • HT3669 I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    Check the Epson web site for updates to drivers and Epson scan software.

  • I upgraded to Mountain Lion and now see "Blocked plug in" on my banking site and on Facebook I can't watch a posted video

    I've upgraded to Mountain Lion and now see "Blocked plug in" when on my banking site and also when on Facebook.  I've been told Adobe Flash is not a good option, any suggestions?

    cin2 wrote:
    I've been told Adobe Flash is not a good option, any suggestions?
    Told by whom? Works here with all my sites.

Maybe you are looking for

  • Can't connect via Airport -- "connection timeout" error, instead

    I've got a MacBook Pro here, which was successfully connected online via Airport, under OS X 10.4.11. Then I upgraded to Leopard (10.5), and the machine would no longer connect automatically to the router. OK, I tried manually configuring the wireles

  • Itunes can't sync my songs into iphone

    please help. I'm at my wit's end. after upgrading my iphone to iOS4 and itunes to 9.2, i can't sync all my songs at all. i keep getting an unknown error (-50) please help.

  • Who wants to help? - beta tester / apps / devs / needed

    Hello! Announcing the beta launch of ThunderCloud! Exclusively at - thundercloud.io Thundercloud is a PAAS solution which enables you to store, retrieve and share mobile app data in the cloud. This means, for the first time ever, you can: • Upload yo

  • Receiver Mail adapter Exactly Once

    Hi, I've setup my scenario RFC (trfc for exactly once QOS ) ->  Mail (receiver) Now I'm testing what happens when the smtp server is down. In message monitor (sxmb_moni) , the message is successful. In comm chanel monitoring, I can see the message is

  • Will spry show a javascript function from an external page?

    I have two pages http://www.autosnetfree.com/clock_buttonajax.php //this page has the spry calling the external page. http://www.autosnetfree.com/clock_auction1.php //this page has a countdown clock to a future date The buttonajax page has a submit b