Can I use 1333GHZ memory in a machine that uses 1066GHZ memory

You may be able to but it all depends on the RAM and the system. Some work, Some Don't.
But if you haven't already bought the RAM just buy what is right for the system.
Even if the faster RAM works it will not run at the faster speed. It would be Clocked down to the speed of the system it is installed in.

Similar Messages

Can you share photos between machines that use the same wifi network? Thanks for your help.

Can you share photos on i-photo between machines that use the same network or even between different accounts on the same machine? I know you can share music on i-tunes but can you do the same on i-photo? Thanks for your help.

Yes.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
You can figure out using it with another machine from that too

I would like to upgrade my OS to the latest version. I now have 10.6.8 and my machine has 1Gb of memory. Need 2Gb for the new OS. Is is possible (and practical) to add memory to a machine that's five years old?

I would like to upgrade my OS to the latest version. I now have 10.6.8 and my machine has 1Gb of memory. Need 2Gb for the new OS. Is is possible (and practical) to add memory to a machine that's five years old?

You can put two 2gb RAM sticks in your model 2,1 but it can only use 3,3gb. This is a hardware limitation and cannot be changed.
http://en.wikipedia.org/wiki/3_GB_barrier
http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
OWC tests have found that there is a slight speed increase with having two 2gb sticks in rather than one 1gb and one 2gb. Your model is in the gray lines at the bottom of the graph. http://eshop.macsales.com/shop/Memory_Benchmark/Apple_MacBook/
You can buy Lion for $29 from the App Store witht a model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. As for programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.
These are good online stores for Mac compatible RAM
OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/ - They offer Mac tested RAM at very good prices.
Crucial Memory http://www.crucial.com/ - good place to buy RAM from all over the world. They also have an excellent memory selector that allows you to choose memory based on your computer's model
Data Memory Systems http://www.datamemorysystems.com/apple-memory.asp - another good, cheap place to buying RAM if you live in the U.S.
Here are instructions on replacing RAM in a MacBook with a removable battery. http://homeoffice.consumerelectronicsnet.com/articles/viewarticle.jsp?id=44404
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

I created an application on a machine with Labview 6.01, can I run this application on another machine that has labview 5?

In the development center we use Labview 6.01, in the testcenter we use labview 5.
Additionally, in the development center we use a unix version of Labview and in the testcenter a Windows version.

You can Save with Option to save VIs as version 5.
Unless your VIs deal with system files in UNIX or Windows (ie. Registry...)
then you have to develop your VI specificly on that OS, since UNIX and
Windows have different ways to deal with system files. Mostly, LabVIEW is OS
independent. I used to have VIs developed from LabVIEW v.3 on UNIX, I can
still open these files from LV v.4 on Windows. Now I can still work with
these VIs on LV 6 on Windows.
Good luck,
Nam.
roybra wrote in message
news:[email protected]..
> I created an application on a machine with Labview 6.01, can I run
> this application on another machine that has labview 5?
>
> In the development center we use Labview 6.01, in the testcenter we
> use l
abview 5.
>
> Additionally, in the development center we use a unix version of
> Labview and in the testcenter a Windows version.

We encountered a problem with some client machines that use Firefox version 24ESR and IE8. Ajax requests of aspx pages from Firefox are getting the following er

I encountered a problem with some client machines that use Firefox version 24ESR and IE8.
Ajax requests of aspx pages from Firefox are getting the following error from the iis server (iis version 7.5):
Bad Request - Request Too Long
HTTP Error 400. The size of the request headers is too long.
From analyzing the request that was sent to the server, I saw that the request consist of only the viewstate of the aspx page.
I tried to disable the viewstate for one page and the server got the request correctly.
I do not encounter any issues on these laptops with postback requests from Firefox or when running the same application with IE8.

Sometimes that means that the page address sent is loo long.
Check the link address you are using.
I can't help you further and will send for more help.

My ipod 5th gen says it is connected to the internet and i can go on apps that require an internet connection but whe i try to use the weather or another app that uses your current location it cant find me???

My ipod 5th gen says it is connected to the internet and i can go on apps that require an internet connection but whe i try to use the weather or another app that uses your current location it cant find me???

If you open the Maps app where does that say you are located?
For location the iPod uses the location of nearby routers that are in Apple's database of routers and their location. Thus it appears that Apple's database is incorrect. You do not have to be connected to the router, just within range.
Apple periodically updates their database based on information they obtain from iPhones, The iPhone has to have turned on the option to send info to Apple. no one has found another way to get the location of a router added/corrected.
You can confirm that by going to well-know place with wifi like Starbucks or McDonalds

Can you get an iphone 5 at target that uses AT&T or Verizon network and use the Straight Talk plan from Walmart?

Can you get an iphone 5 at target that uses AT&T or Verizon network and use the Straight Talk plan from Walmart? I don't have AT&T or Verizon network and I don't want to get them but I was just wondering if you can get the iphone 5 that is at target and use it for the straight talk plan. I will be getting the straight talk plan but I would like to do some research on the iphone 5 first for straight talk. At walmart the phone is $544.99 and I think it will be a lot cheaper to buy it at target.
Thank You!

When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

How/can I use boe search 4 all reports that use specific tables

How/can I use boe search 4 all reports that use specific tables
can this be done with query builder
or
is there a way to search all sql of all reports for specific strings and report names so that I can find all report sql that uses table1 for example?

Hi Bart!
You can use VBScript to extract the dataprovider within the reports (Search for SDK Desktop Intelligence).
If you can wait a few days longer, I can provide my script.
ciao Hakan

Is it possible to use booleans to build a VI that uses buttons to switch between screens (3 only) while the other screens disappear?

As a beginner, I need help figuring out how to build a simply VI that uses boolean logic to switch between three different screens. I need a "Home" screen, the next screen which has a button to go back "Home" and a third screen which has two buttons to go "Home" and "Previous Screen". Can someone help me with a simple block diagram?

Hi,
Or put the data in three tab controls. The tabs itself are hidden. The
program switches between the tab sheet if one of the buttons is pressed.
The buttons are best not copied, e.g. the same buttons are used in every tab
sheet (buttons hover above the tab, a black shadow will apear). If the first
sheet is shown, button 2 and 3 are hidden, sheet two: only button 3 is
hidden, sheet three no button is hidden.
Showing the tabs allows the user to choose the views directlly. The button
logic is not needed anymore. But you'll have to live with a simple tab
sheet, instead of a fancy button system!
Regards,
Wiebe.
"Jason R" wrote in message
news:[email protected]...
> Another solution if you want to avoid property-node hell...
>
> Divide your screen into 1/4ths. That is, make your FP 4x larger than
> your desktop.
>
> Place screen 1 on the upper left quadrant.
> Place screen 2 on the upper right quadrant.
> Place screen 3 on the lower left quadrant.
> Screen 4 (lower right quadrant) is unused.
>
> Disable the ability to scroll at run time.
>
> As the user clicks buttons, use the properties of this vi to move what
> the user can see on the front panel.
>
> Cheating? yep. Easier? yep.
>
> Hope this helps! =)
>
> btw - be sure not to update the FP controls when they are not visible,
> or this will eat processor cycles.
>
> Sincerely,
> Jason G Richmond
> Project Engineer II and LVAAD Instructor
> VI Engineering
> [email protected] (domain should be vieng.com (no A's))
>
>
> missileman wrote:
> > Is it possible to use booleans to build a VI that uses buttons to
> > switch between screens (3 only) while the other screens disappear?
> >
> > As a beginner, I need help figuring out how to build a simply VI that
> > uses boolean logic to switch between three different screens. I need a
> > "Home" screen, the next screen which has a button to go back "Home"
> > and a third screen which has two buttons to go "Home" and "Previous
> > Screen". Can someone help me with a simple block diagram?
>
>

I'm using a Canon HV20 video camera that uses digital tape. After importing to my Events Library in Final Cut X, there are some timecode breaks between clips resulting also in gaps between the clips. Is there a way to avoid this?

I'm using a Canon HV20 video camera that uses digital tape. After importing to my Events Library in Final Cut X, there are some timecode breaks between clips resulting also in gaps between the clips. Is there a way to avoid this?

Thanks Russ. I'm a beginner but Lynda.com has a video on making an archive, so I'll follow her video to try this method.

Use Servlet to instantiate a Class that keeps in memory

Hi,
I have a specific question on how to handle the following situation:
- a page calls a servlet, this servlet generates some HTML
- when the servlet is called via a HTML action like <FORM METHOD=POST action=<servlet> I want to instantiate (from the servlet code) a class that stays in memory even after the servlet is out of scope. This class should reside on the client side.
I am using Tomcat 5.5.9 and Java 1.5.0_2.
Is this possible, any suggestions, tips etc ?
Regards,
Coen

Hi RahulSharna,
I want to avoid using javascript or Applets, I just
need some sort of shadow class that keeps track of
changes and validations in the form.
So I post a form into a client side class instead of
a servlet on the server side.
Thanks,
Coenthe only way this can be done is with dynamic content on the client end(in other words the webbrowser). and that would be with javascript, applets or flash.
I see two problems with your approach:
first, html-forms send its data to other webbrowsers. either by a http-GET or a http-POST request. now unless you have a webserver on the client end, you cant receive form-posts.
secondary, Servlets/JSP are ment as HTTP-services. They don't require a jvm on the client side. they are merely a replacement for cgi's, php, perl and other server-side-scripting languages. hence, you just can't send a class, instanciated on the server, to the client.
(if you use other Java EE technology, like JINI and EJB, you can send copies of class instances to the client end. but in those cases, the client end is not a webbrwoser, but rather a java application communicating with a webservice.)
In your case, id recomend, that you validate it with javascript in realtime(i think thats commonly referred as "AJAX" nowadays) and ensure a validation on the server side as well.
on the servlet side, i would recomend a Controller(servlet)-View(jsp) based implementation: the servlet receives the form-input, validates it, and then forwards the request to the various jsp-views. on fail, it could send the caller back to the one containing the form, and thus already fill the previously entered fields again(this is a matter of the jsp tho).

How do I stop my whole laptop freezing when I use Firefox to visit a site that uses Java aplets?

For the last few weeks, whenever I've used Firefox to visit a trusted site that uses Java aplets, I've got a warning advising me to update Java. But when I check Java, it tells me I already have the most up to date version. However, as of today, whenever I visit the same trusted site my whole laptop freezes - cursor disappears, everything stops. I can't even use Restart - I have to manually disconnect the power. The same happens when I attempt to access Java via the Control Panel (to uninstall) - the moment the cursor hovers over Java, everything freezes and I have to disconnect power. I'm using Vista Home Premium SP2 32-bit. HELP!!

Potentially unsafe versions of the Java plugin are "Click to Play" blocked, meaning that you have to click to activate Java for each site. See the [[How to enable Java if it's been blocked]] article for more information.
'''Note:''' To make sure that your Java plugin is working, you can visit the test pages listed in the article, [[Use the Java plugin to view interactive content on websites]]. If an "Activate Java" message box appears, click inside the box to activate the Java plugin.
When you see the "Activate Java" message box, simply click it to load the Java content normally.
 
[[Image:Fx24-JavaActivate]]
If there is no visible area to activate Java content in the page, click the red plugin icon in the address bar. In the message panel that opens, choose "Allow Now" to enable Java content temporarily.
 
[[Image:Fx24-JavaAllowNow]]
 
The next time you visit the site or any other that uses Java you will see this message again.
If you want to always activate Java for a particular site, you can use the "Allow and Remember" option shown above.
After activating Java, you may also see a "Security Warning" dialog box, asking you to confirm that you want to run Java. This warning comes from Java itself, not from Firefox.
NOTE: After following the above steps, your computer may freeze for around one minute while the Java program is loaded.
Does this solve your problem? Please report back soon.

Use of DSC causes other applications that use SQL: to fail to run.

The use of Labview DSC seems to cause programs that use other vendor's SQL support to lock up and die. My current choice had been to run msconfig to disable loading any labview support upon startup. This allows me to use other applications such as PageManager. However oncde I run Labview I must again reboot to gain access to the other applications.
I thought all SQL and Database drivers were downwards compatible.

Hi,
maybe you should write your question to the NI LV DSC forum directly. It's
not so crowded and suits well for bug reports. I'd suggest to add this to
the discussion "What issues have you run into when upgrading to LabVIEW 7
Express?" ( http://tinyurl.com/xc1c ) even.
Sometimes I've the impression NI needs more pressure of the users for LV
DSC...
"reverse o" schrieb im Newsbeitrag
news:[email protected]..
> The use of Labview DSC seems to cause programs that use other vendor's
> SQL support to lock up and die. My current choice had been to run
> msconfig to disable loading any labview support upon startup. This
> allows me to use other applications such as PageManager. However oncde
> I run Labview I m
ust again reboot to gain access to the other
> applications.
>
> I thought all SQL and Database drivers were downwards compatible.

I no longer have a camera app. Whenever I use Instagram, FaceTime, or snpchat (anything that uses camera) nothing will show up. What is wrong?

Help! Camera app isn't on my phone anymore. Whenever I use an app that uses the camera, it quits out or goes to my camera roll. Not my camera. Thanks for the help!

Check restrictions. Make sure you didn't disable it.
If you have an Exchange account set up on your phone, it is possible for the administrators to lock out cameras on devices connected to their system. Delete the Exchange account and see if it comes back.

Can I choose which backup for Time Machine to use if I have backups from two macs on one drive?

I have Time Machine backup on an external drive. I want to mirgrate all my files onto the new Mac Pro but migration is getting hung up and cant find the drive. Can I set up Time Machine for the new mac on this same drive and then select the old macs backup from within Time Machine?

Most likely, some folders were excluded from your backups as the result of a failed or aborted software installation.
Starting from a clean installation of OS X, set up a new administrator account and log in. Enter Time Machine and press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible.* Select the one you want and navigate to your home folder (in the Users folder at the top level of the old startup volume.)
You should now be able to restore your user data. I suggest you do this in two stages. Quit all applications except the Finder before you begin.
Restore all the visible items at the top level of your home folder.
Hold down the option key and select Go ▹ Library from the Finder menu bar. Enter Time Machine and restore all items in the Library folder. Log out and log back in as soon as the restore is complete.
Any other invisible folders or files at the top level of your home folder that you want to preserve will have to be restored separately. For most users, that isn't necessary.
You'll have to reinstall all third-party applications from scratch, or restore them from another kind of backup, if you have one.
You'll have another problem if this is a new computer, or if you erased the startup volume: The next time you back up, Time Machine won't recognize any files as being the same as they were before, and will make a full copy of all files. There might not be enough space on one or more of your backup volumes for that. There are different ways of dealing with that situation, depending on your needs. The easiest way is to set your backup drives aside, if possible, until you're sure you'll no longer need the data on them, then erase them and start over. Meanwhile start a new backup on one or more empty storage devices. If that solution isn't workable for you, ask for instructions.
*If you don't see any snapshots in Time Machine, exit the time-travel view and then hold down the option key while selecting
Browse Other Backup Disks...
from the Time Machine menu, which has an icon that looks like a clock running backwards. Select the backups of your computer by its previous name. If you don't have the Time Machine menu, open the Time Machine preference pane in System Preferences and check the box marked
Show Time Machine in menu bar

Can I use 1333GHZ memory in a machine that uses 1066GHZ memory

Similar Messages

Maybe you are looking for